Dekala Sunrise Alarm Clock

What's Included

• Sunrise Alarm Clock
• USB Cable
• Adapter
• User Manual

Get Started

1. Remove the insulation film from the button cell compartment at the bottom.
2. Connect the Sunrise Alarm Clock to power using the USB cable and adapter provided.

Important: This product has no power on/off button. It will be on once you plug the power adapter into the socket. To disconnect power, unplug the power adapter.

Product Overview

The Dekala Sunrise Alarm Clock features a digital display and various control buttons. The device has a speaker and a button cell compartment.

Key Components:

• 1. Alarm 2: Button to set or activate Alarm 2.
• 2. Alarm 1: Button to set or activate Alarm 1.
• 3. Down: Button to decrease values or navigate down.
• 4. LED Light: Button to control the LED light.
• 5. Up: Button to increase values or navigate up.
• 6. Sonnze: Button label. Function not explicitly detailed in overview.
• 7. Volume +: Button to increase volume.
• 8. FM Radio: Button to access FM Radio functions.
• 9. Volume -: Button to decrease volume.
• 10. Sleep Aid: Button to activate Sleep Aid features.
• 11. Time Setup/LED Display Mode: Button to set time and change LED display modes.
• 12. LED Display: Shows time, alarm status, and other information.
• 13. USB Output: Port for USB output.
• 14. FM Antenna: Connection for the FM radio antenna.
• 15. Micro USB Input: Port for power input.
• 16. Speaker: Emits sound for alarms and radio.
• 17. Button Cell Compartment: Houses the backup battery.

Operation Guide

Setting the Time

The device automatically saves settings and exits if no operation is performed for 15 seconds.

Buttons used: [Time Setup icon], [Up icon], [Down icon]

1. Press and hold the [Time Setup icon] for 2 seconds until the Hour flashes on the LED display.
2. Press the [Up icon] or [Down icon] to change the Hour, then press the [Time Setup icon] to confirm and switch to Minute.
3. Press the [Up icon] or [Down icon] to change the Minute, then press the [Time Setup icon] to confirm and set the Clock Format.
4. Press the [Up icon] or [Down icon] to select between 24-hour and 12-hour clock format, then press the [Time Setup icon] to confirm and complete the setting.

Tip: If 12-hour format is selected, PM or AM will be displayed.

LED Display Brightness

Buttons used: [Time Setup icon]

Press the [Time Setup icon] to cycle through brightness levels: Day Mode, Night Mode, and OFF.

Day Mode: LED display is always at the brightest level.

Night Mode: LED display is always at the lowest level.

OFF: Turns off the LED display.

Setting Alarms (Alarm 1 Example)

Buttons used: [Alarm 1 icon], [Up icon], [Down icon]

You can set Alarm 1 and Alarm 2 with wake-up light. Setting Alarm 1 is used as an example.

1. Press and hold the [Alarm 1 icon] for 2 seconds until the alarm icon and Hour flash.
2. Press [Up icon] or [Down icon] to change the Hour, then press [Alarm 1 icon] to confirm and switch to Minute.
3. Press [Up icon] or [Down icon] to change the Minute, then press [Alarm 1 icon] to confirm and start Ringtone Setting.
4. Press [Up icon] or [Down icon] to select a ringtone (S-00: Ringtone off, S-01 to S-07: Nature sounds, F-08: Last FM station). Press [Alarm 1 icon] to confirm and start Volume Setting.
5. Press [Up icon] or [Down icon] to adjust ringtone volume (U-01 to U-16: Volume levels). Press [Alarm 1 icon] to confirm and start Sunrise Light Setting.
6. Press [Up icon] or [Down icon] to adjust the brightness level for the light (L-00: Light off, L-01 to L-20: Brightness levels). Press [Alarm 1 icon] to confirm and start setting the sunrise time.
7. Press [Up icon] or [Down icon] to select the sunrise time (10, 20, 30, 40, 50, 60 MIN). Press [Alarm 1 icon] to confirm and complete all settings for Alarm 1. Alarm 1 is now active.

Tip: If 10 MIN sunrise time is selected and the alarm is at 7:00 AM, the light will turn on at 6:50 AM and gradually brighten.

Note: To stop Alarm 1 when it rings, press the [Snooze icon]. To turn Alarm 1 on/off when it's not ringing, press the [Alarm 1 icon]. An alarm icon appears when the alarm is on.

Snooze Function

Buttons used: [Snooze icon]

When the alarm rings, press the [Snooze icon] to delay the alarm for 9 minutes. You can snooze up to 5 times.

Note: Press the corresponding Alarm Button ([Alarm 1 icon] or [Alarm 2 icon]) to manually stop the alarm. If no response within 15 minutes, the alarm stops automatically.

FM Radio

Buttons used: [FM Radio icon], [Up icon], [Down icon]

Before first use, press and hold [FM Radio icon] for 2 seconds to automatically search for FM stations. Stations will be saved as P-01, P-02, etc.

1. Press [FM Radio icon] to turn the FM radio on/off.
2. Press and hold [Up icon] or [Down icon] to go to the next station.
3. Press [Up icon] or [Down icon] to adjust the volume (U-01 to U-16: Volume levels).

Note: Unwind the antenna and move it for best reception.

Sleep Aid

Buttons used: [Sleep Aid icon], [Up icon], [Down icon]

Sleep Aid simulates a sunset, with dimming light and decreasing nature sound volume to help you fall asleep.

1. Press and hold [Sleep Aid icon] for 2 seconds, then press [Up icon] or [Down icon] to select a timer (10 MIN to 120 MIN).
2. Press [Sleep Aid icon] to confirm, then press [Up icon] or [Down icon] to adjust light brightness (L-00: Light off, L-01 to L-20: Brightness levels).
3. Press [Sleep Aid icon] to confirm, then press [Up icon] or [Down icon] to select a sound (S-00: Sound off, S-01 to S-03: Nature sounds, F-04: Last FM station).
4. Press [Sleep Aid icon] to confirm, then press [Up icon] or [Down icon] to adjust sound volume.
5. Press [Sleep Aid icon] to confirm and complete Sleep Aid setup. Sleep Aid is now enabled.

Tip: Press the [Sleep Aid icon] to turn Sleep Aid mode on/off.

Bedside Light

Buttons used: [LED Light icon], [Up icon], [Down icon]

1. Press [LED Light icon] to turn the Bedside Light on/off.
2. Press [Up icon] or [Down icon] to adjust the brightness level.

Atmosphere Light

Buttons used: [LED Light icon], [Up icon], [Down icon]

Double press the [LED Light icon] to turn on the Atmosphere Light. The color will change automatically.

Short press [Up icon] or [Down icon] to choose one solid color (7 colors available).

Short press the [LED Light icon] again to turn off the Atmosphere Light.

Specifications

Cautions

• Please use the product correctly according to the instructions. Disassembling and collision are strictly prohibited.
• Please place the product on a stable, horizontal, and non-smooth surface.