Dekala Sunstone™ ACA-003-S Instructions

Precaution

Please read this manual carefully before using the product and keep it in a safe place for future reference.

For the first use of ACA-003-S, remove the pull tab on the battery compartment and then connect the adapter to turn on the alarm clock.

For further assistance, contact the Dekala support team. Official Website: www.dekalastore.com Email: info@dekalastore.com

Content Overview

This document provides instructions for the Dekala Sunstone alarm clock, covering the following sections:

• Product Overview (Package List, Front View, Back View, Holder Installation)
• App Control (Download App, Wi-Fi Connection, Connecting Mode, Device Connection)
• App Usage (Button Introduction, Light Setting, Alarm Setting, Snooze Setting, Sleep-aid Setting, Time Setting, Radio Setting)
• Button Operations (Time Setting, Brightness, Alarm, Snooze/Stop, Lights, Sleep-aid, FM Radio)
• Specification
• Frequently Asked Questions (FAQ)
• Notes

Product Overview

1-1-1. Package List

The package includes:

• Sunrise Alarm Clock (x1)
• Holder (x4)
• USB Cable (x1)
• Adapter (x1)
• User Manual (x1)

1-1-2. Front View

The front of the device features several controls and indicators:

• Snooze/Night Light Switch
• Setting "-"/Volume "-" button
• Alarm 1/Alarm 2 buttons
• Light Brightness Adjustment control
• Light Switch button
• Setting "+"/Volume "+" button
• Sleep-aid button
• Display Brightness/Time Setting button
• FM Radio Tuning button
• FM Radio Switch button
• Digital display showing time (e.g., 12:00), AM/PM indicators, and other status icons.

1-1-3. Back View

The back of the device includes:

• USB Output port
• FM Radio Antenna connector
• Micro USB Input port
• Button Battery compartment (used for saving settings, not for alarm backup)
• Reset button

1-1-4. Holder Installation and Removal

To install the stand: Insert the stand directly into the mounting hole until it is securely attached.

To remove the stand: Hold the stand and gently press down to remove it.

App Operations

2-1. Download App

Download the "Dekala Home or Smart Life" app from the App Store or Google Play. Alternatively, scan the provided QR code to download. After downloading, sign up and log in.

2-2. Connect your phone to 2.4 GHz Wi-Fi

Most routers offer both 2.4 GHz and 5 GHz Wi-Fi channels. Your phone may automatically connect to the 5 GHz band. To connect the alarm clock, ensure your phone is connected to the 2.4 GHz Wi-Fi network. Check your router's label for the 2.4 GHz Wi-Fi name (often ending in "2.4G", "2G", or "2"). If you have renamed your Wi-Fi, try both channels or contact your internet service provider.

For the initial connection, both your smartphone and the Dekala product must be on the same 2.4 GHz Wi-Fi network. Once the initial connection is established, remote control via the "Smart Life" app can use cellular data, 5G Wi-Fi, or other networks.

2-3. Make Alarm Clock Enter into WiFi Connecting Mode

Plug the device into power. A flashing [Wi-Fi icon] indicates the device is in Wi-Fi connecting status. If the [Wi-Fi icon] is solid or hidden, long-press the [Snooze button] until the [Wi-Fi icon] flashes to enter connecting status.

2-4. Connect Device to App

Note:

• Ensure GPS location, 2.4 GHz Wi-Fi, and Bluetooth are enabled on your smartphone before connecting.
• Verify the alarm clock is in Wi-Fi connecting mode (indicated by a flashing [Wi-Fi icon]).

Steps:

1. Open the "Smart Life" app and tap "Add" or "Add Device".
2. Tap "Add" to search for nearby devices.
3. Enter the 2.4 GHz Wi-Fi password and tap "Next". Ensure your smartphone is connected to the same 2.4 GHz Wi-Fi.
4. After successful connection, tap "Next".
5. You can rename the device. Tap "Done" to complete the Wi-Fi setup process.
6. The added device, "Wake Up Light II", will appear in the app. Tap it to access the Home Page.

App Usage

2-5-1. Button Introduction

The app interface maps to the device's functions:

• Snooze
• Alarm Clock
• Light
• Sleep-aid
• Setting
• FM Radio
• Display

2-5-2. Light Setting

Tap the [light icon] in the app to choose the light display color and adjust brightness. You can select from various colors and adjust the brightness level. The app also allows for colorful light dynamic loops or choosing a single color.

2-5-3. Alarm Setting

Tap the [alarm icon] to set alarms. The device supports up to 4 alarms. For each alarm, you can set the time, repeat schedule (e.g., everyday), sound effect (including built-in sounds and FM radio), volume, and simulated sunrise time and brightness.

Note: After changing alarm settings, tap "Save" to apply the changes.

2-5-4. Snooze Setting

Tap the [snooze icon] to set snooze preferences. You can configure the snooze mode (sound, light, radio, or combinations) and the snooze time range (8-15 minutes).

2-5-5. Sleep-aid Setting

Tap the [sleep-aid icon] to configure sleep-aid functions. This includes setting sleep duration (10-120 minutes), sleep-aid light brightness (20 levels), choosing sleep sounds (3 types + radio), and adjusting sleep sound volume.

2-5-6. Time Setting

Tap the [setting icon] or "Time Display" to set the time and choose between 12/24-hour format. You can also select display brightness modes: Day Mode, Automatic Mode, and Off Mode. The device automatically calibrates the time via Wi-Fi connection.

2-5-7. Radio Setting

Tap the [FM radio icon] to access FM radio functions. You can adjust volume, browse stations from a list, or use the "Search" function to find stations automatically.

Button Operations

3-1. Time & 12/24H Setting

To set the hour: Press and hold the "Setting" button for 2 seconds. Use the "+" or "-" buttons to adjust the hour.

To set the minute: Press the "Setting" button again. Use the "+" or "-" buttons to adjust the minute.

To set 12/24-hour clock: Press the "Setting" button again. Use the "+" or "-" buttons to choose between 12-hour and 24-hour format. Press "Setting" to complete the time setting.

3-2. Display Brightness Setting

Press the "Setting" button to cycle through three display brightness modes: Off Mode, Day Mode, and Automatic Mode. The default brightness is Day Mode.

3-3. Alarm Clock Setting

You can set Alarm 1 and Alarm 2 using the physical buttons. For Alarms 3 and 4, use the app.

Press the "Alarm" button to turn the alarm on or off. When an alarm is active, its icon will illuminate on the display.

3-3-1. Alarm Setting (Alarm 1 as the example)

There are 7 steps to set an alarm with sunrise simulation:

1. Enter Alarm Clock Setup: Long press the "Alarm 1" button for 2 seconds.
2. Set Hour: Use the "+" or "-" buttons to adjust the hour.
3. Set Minute: Press "Alarm 1" again. Use "+" or "-" to adjust the minute.
4. Choose Ringtone: Press "Alarm 1" again. Select from 8 sound effects (S-01 to S-07 for natural sounds, S-00 for no sound, or FM radio).
5. Adjust Volume: Press "Alarm 1" again. Use "+" or "-" to adjust the volume level (U-01 to U-16). This step is skipped if S-00 sound is selected.
6. Choose Sunrise Brightness: Press "Alarm 1" again. Use "+" or "-" to adjust the brightness level (L-01 to L-20, L-00 for light off).
7. Set Sunrise Simulation Time: Press "Alarm 1" again to set the duration (10-60 minutes) for the sunrise simulation to start before the alarm sounds. Press "Alarm 1" finally to complete the alarm setting.

3-4. Snooze/Stop Alarm Clock

3-4-1. Snooze

When the alarm rings, press the "Snooze" button to activate snooze. The light and sound will resume after 9 minutes (up to 5 times). The app allows further customization of snooze behavior (e.g., light only, sound only).

3-4-2. Stop Alarm

Press the "Alarm 1" button to stop the ringing alarm. The alarm will also stop automatically after 30 minutes of inactivity. Note: Physical buttons can only stop alarms 3 and 4.

3-5. Night Light/Bedside Light/Color Light

3-5-1. Night Light

Press the "Snooze" button to turn the night light on or off. The night light brightness is fixed at L-02 and is recommended for nighttime use.

3-5-2. Sunrise Light

Press the "Light" button to turn the sunrise light on or off. Use the "+" or "-" buttons to adjust the brightness.

3-5-3. Color Light

Double press the "Light" button to turn on the color light mode, which features automatic color-changing. You can also press "+" or "-" to choose a specific color or press and hold them to quickly adjust the color and activate auto color-change mode. Press "Light" to turn it off.

3-6. Sleep-aid Function

Set sleep-aid with sunset simulation in 6 steps:

1. Long press the "Sleep-aid" button for 2 seconds to enter sleep-aid setting.
2. Set sleep duration (10-120 minutes) using "+" or "-".
3. Set sleep-aid light brightness (20 levels) using "+" or "-".
4. Choose sleep sound (3 sounds + radio) and adjust volume using "+" or "-".
5. Finish setting.

3-7. FM Radio Setting

Press the "FM Radio" button to turn FM radio on or off.

Double press the "FM Radio" button to search for radio stations automatically.

When FM mode is on, use "+" or "-" to adjust frequency (0.1 MHz) or press and hold them to change radio stations. Use "+" or "-" to adjust the volume.

Specification

FAQ

1. Why can't I turn the alarm clock on? Connect the adapter to activate the alarm clock for the first use.
2. Does the alarm clock need to be connected to the adapter all the time to work? The STC-001-S model does not have a built-in battery, so it needs to be connected to a power supply via USB all the time.
3. Why didn't the alarms go off? Check the display for the wake-up alarm icon. Press the wake-up alarm button to verify the set alarm time and ensure the sound is not set to S-00.
4. Can the light color be changed? Yes, the light colors can be changed via the app. There are 7 different colors available.
5. How many kinds of sound effect are there and can I change it? There are 10 kinds of sound effects that can be changed.

Notes

• Place the product on a stable, horizontal, and non-smooth surface.
• Do not disassemble the product as it contains fragile components.
• Do not use the product in rooms where the temperature is below 0°C or above 40°C.
• Wipe the product with a soft cloth. Avoid abrasive cleansers, cleansing pads, or solvents like alcohol or acetone, as they may damage the product's surface.

For further assistance, contact the Dekala support team. Official Website: www.dekalastore.com Email: info@dekalastore.com