Dekala Sunrise Alarm Clock, Light Alarm Clock, Friendship Lamp – Dekala Store
Instructions for DEKALA models including: ACA-002-B Sunrise Alarm Clock, ACA-002-B, Sunrise Alarm Clock, Alarm Clock, Clock
Amazon.com: Sunrise Alarm Clock for Heavy Sleepers, Wake Up Light with Sunrise/Sunset Simulation, Dual Alarms & Natural Sounds, Snooze & Sleep Aid, FM Radio, 7 Colors Night Light for Bedroom, Ideal for Gift : Home & Kitchen
File Info : application/pdf, 17 Pages, 4.55MB
DocumentDocumentDekala Sunrise Alarm Clock ACA-002-B Instructions Please read the instructions carefully before use and keep it in proper storage (V2.0) Instruction Videos Support@dekalastore.com If you need any assistance please feel free to contact us CONTENT What's Included 02 Get Started 02 Product Overview 03 Operation Guide 05 Specifications 15 Cautions 15 Storage 16 WHAT'S INCLUDED Sunrise Alarm Clock USB Cable Adapter Instructions Please read the instructions carefully before use and keep it with proper storage (V2.0) User Manual GET STARTED 1. Remove the Insulation Film from the Button Cell Compartment at the bottom. 2. Connect the Sunrise Alarm Clock to power with the USB Cable and Adapter provided. Important: This product has no power on/off button, and it will be on once you plug the power adapter into the socket. To disconnect power, unplug the power adapter. 02 3. Loosen the tie that wraps the FM Radio Antenna, then unroll the wire for receiving strong signals when turning on the FM Radio. PRODUCT OVERVIEW Up LED Light Down Alarm 1 Alarm 2 Snooze Volume + FM Radio Volume Sleep Aid Time Setup LED Display Mode LED Display 03 Speaker USB Output 04 Micro USB Input FM Antenna Button Cell Compartment OPERATION GUIDE Note: The Sunrise Alarm Clock will automatically save the current setting and exit from setting mode if the operation is not resumed within 15s. Time Setting Setting Watch Instruction Video Step 1: Press and hold the Setting/ button for 2 seconds until the hour starts flashing Step 2: Press to change the Hour, then press Setting/ to confirm and switch to adjust "Minute". Setting Step 3: Press to change the Minute, then press Setting/ to confirm and start to set the Time Format. Setting 05 Step 4: Press to select Time Format 24-hour clock or 12-hour clock, then press Setting/ to confirm and complete the setting. Tip: lf the 12-hour time format is selected, PM or AM will be displayed accordingly. Setting Adjust the Brightness of Time Display Press Setting/ and OFF. to toggle the brightness of the LED Display among Day Mode, Night Mode Setting Day Mode indicates that the brightness level of the LED display will remain consistently bright, even during nighttime. Setting Night Mode indicates the brightness level of the LED Display will always be the lowest. 06 Setting OFF means turning off the LED display. Alarms Setting You could set Alarm 1 and Alarm 2 with the wake-up light. Watch Instruction Video We will take setting Alarm 1 as an example to guide you how to set an alarm. Alarm 1 Step 1: Press and hold Alarm 1/ for 2 seconds until the icon and the Hour start flashing on the LED display. Step 2: Press to change the Hour, then press Alarm 1/ to confirm and switch to adjust "Minute". Alarm 1 07 Step 3: Press to change the Minute, then press Alarm 1/ to confirm and start the Ringtone Setting. Alarm 1 Step 4: Press to select your favorite ringtone for Alarm 1, then press Alarm 1/ to confirm and start the Volume Setting. Alarm 1 Tip: S-00: Ringtone off S-01 to S-07: Nature sounds F-08: The last FM station you were tuned to before turning off the radio. lf you prefer another station, please turnon the FM radio to search and select the one you like, then set the alarm again. Step 5: Press to adjust the ringtone volume, then press Alarm 1/ to confirm and start the Sunrise Light Setting. Tip: U-01 to U-16: Volume levels 08 Alarm 1 Step 6: Press to adjust the brightness level for the light, Once done, press Alarm 1/ to confirm your selection and start setting the sunrise time that is the lighting time before the alarm ringing. Alarm 1 Tip: L-00: Light off L-01 to L-20: Brightness levels lf you select L-00, there will be no sunrise light (but only ringtone) when Alarm 1 rings. Step 7: Press to select the sunrise time from 10, 20, 30, 40, 50 and 60 MIN, then press Alarm 1/ to confirm and complete all the settings for Alarm 1. Alarm 1 is on after setup. Alarm 1 Tip: If you set the duration to 10 minutes and the alarm time to 7:00 AM, the light will turn on at 6:50 AM and slowly increase in brightness. By the time the alarm goes off at 7:00 AM, the light will be at the brightness level you selected in Step 6. Note: -When the alarm is ringing, press the button to close the alarm -If you don't need to use the alarm function on the weekend, you can identify it by icon , whether the alarm clock is turned on. The screen shows the icon which means that the alarm function is turned on. On the contrary, it means that the alarm function is turned off. 09 Snooze When the alarm rings, press Snooze/ to activate Snooze Mode to delay the alarm for 9 minutes. Snooze Watch Instruction Video Note: 1. You can snooze up to 5 times. 2. Press the corresponding Alarm Button / to manually stop the alarm. 3. If you don't respond to it within 15 minutes after the alarm rings, the alarm will automatically stop for this time. FM Radio . Press and hold the FM Radio/ button down for 2 seconds, the clock will scan all the available staions automatically and save them as P-01/P-02 and so on(up to 20 channels). You can simply wait until the process is complete without needing to take any further action. . After finishing, the clock radio will select P01channel by default. FM Radio FM Radio Step 1: Press FM Radio/ to turn on/off FM radio. 10 Long Press Step 2: Press and hold to select other the channel you are interested in. Step 3: Press to adjust the volume. Tip: U-01 to U-16: Volume levels Note: To improve your reception, please completely extend the antenna and adjust its position until you achieve the strongest signal. Short Press Falling-asleep Mode Falling-asleep mode simulates the natural process of a sunset to help you easily drift off to sleep. Once enabled, the light will gradually dim to simulate the setting sun, while the volume of your chosen nature sounds will decrease over time. Sleep-aid Step 1: Press the Fall-asleep/ button for 2 seconds to enter the fall-asleep mode. Press the button to adjust the Timer(up to 120minutes). And then press the fall-asleep button to confirm it. Watch Instruction Video 11 Step 2: Press button to adjust the brightness. And then press the Fall-asleep/ button to confirm it. Sleep-aid Tip: L-00: Light off L-01 to L-20: Brightness levels Step 3: Press button to adjust the sound. You can choose pre-set natural sounds or FM radio as fall-asleep sound. And then press the Fall-asleep/ button to confirm it. Sleep-aid Tip: S-00: Sound off S-01 to S-03: Nature sounds F-04: The last FM station you were tuned to before turning off the radio. lf you prefer another station, please turn on the FM radio to search and select the one you like, then set it again. Step 4: Press 12 button to adjust the volume. Sleep-aid Step 5: Press Fall-asleep/ to confirm your selection and complete all the setting for Sleep Aid. Sleep Aid is enabled after setup. Tip: Press to turn on/off Sleep Aid mode. Sleep-aid Colorful Light Setting Manual Color Light Mode Step 1: Press Light/ to enter the manual color light mode. Light Watch Instruction Video Step 2: Press to adjust the brightness level. 13 Auto Color Light Mode Double press Light/ to enter the auto color light mode,which means the color of the light will change automatically. Light Short press to choose one solid color (7 colors are available), which means it will stay the same color until you press the button again. Short press Light/ again to turn off the Colorful Light . 14 Light SPECIFICATIONS Model Size Weight Material FM radio frequency Control mode Adaptor Certification ACA-002-B 168×165×84.6mm 320g ABSPCElectronic components 87.5-108MHz Button control 5V-2A/100-240V CAUTIONS Please use the product correctly according to the instructions. Disassembling and collision are strictly prohibited. Please place the product on a stable, horizontal, and non-smooth surface. 15 Do not use it in high temperature, humidity and corrosive environment to avoid electric leakage due to circuit damage. Please keep it in a proper place and out of reach of children to avoid accidents. This product is not fireproof, do not throw it into the fire, and do not place it close to any fire source. This product is not waterproof, do not put it into the water to avoid damage. STORAGE Please wipe the product with a soft cloth. Do not scrub the product with abrasive cleaner, rough chemical, alcohol or acetone detergent to avoid damage to the surface of the product. Store the product in a safe, dry place where it will not be crushed, bruised or damaged. Do not wrap the power cord around the appliance during storage. Feel free to contact us if you need further assistance, our troubleshooting team will get back to you ASAP. Official Website : www.dekalastore.com Email : info@dekalastore.com 16