Dekala Sunstone™ ACA-003-S Instructions

Product Overview

Package List

The package includes:

• Sunrise Alarm Clock *1
• Holder *4
• USB Cable *1
• Adapter *1
• User Manual *1

Front View

The front of the Dekala Sunstone features a circular design with a central digital display showing the time (e.g., 12:00). Buttons are arranged around the perimeter:

• Top: Snooze/Night Light Switch
• Left Side: Setting "-"/Volume "-", Alarm 1/Alarm 2, Light Brightness Adjustment, Light Switch
• Right Side: Setting "+"/Volume "+", Sleep-aid, Display Brightness/Time Setting, FM Radio Tuning, FM Radio Switch

Back View

The back of the device includes:

• Ports: USB Output, FM Radio Antenna
• Controls/Features: Button Battery (used for saving settings, not for backup alarm clock), Reset button, Micro USB Input

Holder Installation and Removal

Installation: Insert the stand directly into the mounting hole until it is securely attached.

Removal: Hold the stand and gently press down to remove it.

App Operations

Download App

Download the "Dekala Home or Smart Life" app from the App Store or Google Play. Sign up and log in.

Connect your phone to 2.4 GHz Wi-Fi

Most routers offer 2 Wi-Fi channels (2.4 GHz and 5 GHz). Your phone likely connects to 5 GHz by default. To connect to 2.4 GHz:

• Check the back of your router for the 2.4 GHz Wi-Fi name (often ends with "2.4G" or "2G"). If you've changed it, try both channels or contact your internet service provider.
• For the initial connection, both your phone and the Dekala product must be on the same 2.4 GHz Wi-Fi network. After the first connection, you can control the device using the Smart Life app via cellular data, 5G Wi-Fi, or other networks.

Make Alarm Clock Enter into WiFi Connecting Mode

Plug the device into power. A flashing Wi-Fi icon indicates the device is in Wi-Fi connecting status. The "Wi-Fi" icon will flash.

To reset Wi-Fi: If the Wi-Fi icon is solid or hidden, long-press the Wi-Fi icon until it flashes to enter Wi-Fi connecting status.

Connect Device to App

Note: Ensure GPS location, Wi-Fi (2.4 GHz only), and Bluetooth are enabled on your smartphone.

1. Open the "Smart Life" app. Tap "Add" or "Add Device" if the add page does not pop up.
2. Tap "Add" in the "Add Device" screen. The app will search for nearby devices. Ensure your device has entered pairing mode.
3. Enter your 2.4 GHz Wi-Fi password and click "Next". Ensure your smartphone and the Smart Life app are both connected to 2.4 GHz Wi-Fi.
4. After the device successfully connects to your 2.4 GHz Wi-Fi, click "Next".
5. You can rename the device. Tap "Done" to complete the Wi-Fi setup process.

The added device, "Wake Up Light II", will appear in the "All Devices" list. Tapping it opens the control interface.

App Usage - Button Introduction

The app interface allows control over various functions:

• Snooze
• Alarm Clock
• Light
• Sleep-aid
• Setting
• FM Radio
• Display

App Usage - Light Setting

Tap the "Light" icon in the app to access light settings.

• Adjust the light brightness using a slider.
• Toggle "Colorful Light" to enable color options.
• When "Colorful Light" is active, tap "switch" to change the light color.
• You can choose between two light modes: 1. Colorful light dynamic loops, or 2. Choose a specific color.
• Available colors include Red, Orange, Yellow, Green, Cyan, Blue, and Purple.

App Usage - Alarm Setting

Tap the "Alarm" icon to set alarms. Up to 4 alarms can be configured.

For each alarm, you can set:

• Time (AM/PM)
• Repeat schedule (e.g., Everyday)
• Ring Time
• Alarm Mode
• Sounding Sound (e.g., 1-Bird)
• Volume
• Simulated Sunrise Time
• Sunrise Brightness
• Support Snooze option

Remember to click "Save" after making changes.

App Usage - Snooze Setting

Within the app's alarm settings or by tapping "Snooze", you can configure snooze options:

• Snooze Mode: Choose to turn off lights or sound during snooze.
• Snooze Time: Select the snooze duration, typically ranging from 8 to 15 minutes.

When an alarm rings, tap "Snooze" on the device or in the app to activate snooze.

App Usage - Sleep-aid Setting

Tap the "Sleep-aid" icon to access sleep-aid functions.

You can configure:

• Sleep Mode
• Sleep Sound (e.g., 1-Forest, or FM radio)
• Ring Time
• Volume
• Sunset Brightness
• Sleep Time

App Usage - Time Setting

Access time settings to set the current time and choose between 12/24 hour formats.

You can also select the display brightness mode: Day Mode, Automatic Mode, or Close Mode. The device automatically calibrates the time after a successful Wi-Fi connection.

App Usage - Radio Setting

Tap the "FM Radio" icon to use the radio function.

• Turn FM Radio on/off.
• Adjust volume.
• Browse stations from a list or use the "Search" function to scan automatically.
• You can adjust frequency (0.1 MHz) and change radio stations using the navigation buttons.

Button Operations

Time & 12/24H Setting

1. Press and hold the "Setting" button for 2 seconds to adjust the hour. Use the "+" or "-" buttons to change the number.
2. Press "Setting" again to adjust the minute. Use "+" or "-" to change the number.
3. Press "Setting" again to set the 12/24-hour clock format. Use "+" or "-" to choose.
4. Press "Setting" finally to complete the time setting.

Display Brightness Setting

Press the "Setting" button (or the designated brightness button) to cycle through three display brightness modes: Off Mode, Day Mode, and Auto Mode. The default brightness is Day Mode.

Alarm Clock Setting

Note: You can only set Alarm 1 and Alarm 2 using the device buttons. For Alarms 3 and 4, use the app.

Press the "Alarm" button to turn the alarm on or off. An icon will illuminate on the display when Alarm 1 is turned on, and disappear when it is turned off.

Alarm Setting (Alarm 1 as example)

There are 7 steps to set the alarm clock with sunrise simulation:

1. Step 1: Long press the "Alarm 1" button for 2 seconds to enter Alarm Clock Setup. Adjust the hour using "+" or "-".
2. Step 2: Press "Alarm 1" again to set the minute. Adjust the number using "+" or "-".
3. Step 3: Press "Alarm 1" again to set the ringtone. Use "+" or "-" to adjust the type. Available sound effects are S-01 to S-07 (built-in natural sounds), S-00 (no sound), and FM radio.
4. Step 4: Press "Alarm 1" again to set the volume. Use "+" or "-" to adjust the level (U-01 to U-16). This step is skipped if S-00 sound is chosen.
5. Step 5: Press "Alarm 1" again to set the Wake Up Light Brightness. Use "+" or "-" to adjust the level (L-01 to L-20, L-00 for OFF).
6. Step 6: Press "Alarm 1" again to set the Sunrise Simulation time (10-60 minutes). Use "+" or "-" to adjust the number.
7. Press "Alarm 1" finally to complete the alarm setting.

Snooze/Stop Alarm Clock

Snooze

Press the "Snooze" button when the alarm is ringing to activate snooze. After 9 minutes, the light and sound will resume (up to 5 times). The app offers options to customize snooze behavior (e.g., turn off lights/sound, set time range 8-15 minutes).

Stop Alarm

Press the "Alarm 1" or "Alarm 2" button to stop the alarm when it is ringing. The alarm clock will automatically stop after 30 minutes of inactivity. Note: When using the device buttons, you can only stop alarms 3 and 4 if they were set via the app.

Night Light/Bedside Light/Color Light

Night Light

Press the "Snooze" button to turn the night light on/off. The night light brightness is fixed at L-02 and cannot be adjusted. It is recommended for use at night.

Sunrise Light

Press the "Light" button to turn the sunrise light on/off. Use the "+" or "-" buttons to adjust the brightness.

Color Light

Double press the "Light" button to turn on the color light. The icon will illuminate, and the auto color-change mode will be activated.

• Press "+" or "-" to choose a specific color of light.
• Press and hold "+" or "-" to quickly adjust the light color and activate auto color-change mode.
• Press "Light" to turn it off.

Sleep-aid Function

There are 6 steps to set the sleep-aid function with Sunset Simulation:

1. Step 1: Long press the "Sleep-aid" button for 2 seconds to enter sleep-aid setting. Adjust sleep-aid duration (10-120 minutes) using "+" or "-".
2. Step 2: Press "Sleep-aid" again to set Light Brightness. Adjust the level using "+" or "-" (L-01 to L-20, L-00 for OFF).
3. Step 3: Press "Sleep-aid" again to set Sound. Use "+" or "-" to adjust the type. Options include S-00 (No sound), S-01-S-03 (Sleep sounds), and FM radio.
4. Step 4: Press "Sleep-aid" again to set Volume. Use "+" or "-" to adjust the level (U-01 to U-16). This step is skipped if S-00 sound is chosen.
5. Step 5: Press "Sleep-aid" to complete the setting.

FM Radio Setting

Press the "FM Radio" button to turn the FM radio on/off.

• Double press the "FM Radio" button to search for radio stations automatically.
• When the FM mode is turned on, press the navigation buttons to adjust frequency (0.1 MHz) or change radio stations.
• Use the "+" or "-" buttons to adjust the volume.

Specification

FAQ

1. Why can't I turn the alarm clock on? Connect the adapter to activate the alarm clock for the first use.
2. Does the alarm clock need to be connected to the adapter all the time to work? The STC-001-S model does not have a built-in battery, so it needs to be connected to a power supply via USB all the time.
3. Why didn't the alarms go off? Check the display to confirm there is a wake up alarm icon in the normal mode. Then press the wake up alarm button to check if the set alarm time is correct or the sound is set to S-00.