Important Safety Instructions
DANGER
To reduce the risk of electrical shock, disconnect the power cord from the outlet and machine and wait 5 minutes before servicing this product. Any diagnosis or repairs of this product should be done by a trained service technician or an individual who is aware of proper safety procedures. If proper safety procedures are not followed, an electric shock is possible. Store the power cord in a secure location.
WARNING! ⚠️
To reduce the risk of burns, fire, electric shock, or injury to persons:
- Read and understand the Important Safety Instructions before working on the machine. Failure to obey the instructions and safety warnings could cause injury to the service technician or bystanders.
- Keep bystanders, children and pets away from the product being serviced at all times.
- Make sure that the repair is done in an appropriate work space away from foot traffic and exposure to bystanders.
- Be aware that as hardware is removed from parts on this machine, the loose parts may need to be supported or damage to you or the machine may occur. Be sure to be prepared to support the weight of the part before fully removing any hardware when servicing the machine. If necessary, use a second person to assist with supporting the part.
- Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do maintenance steps involving these components. Do not try to do heavy or awkward steps on your own.
- If replacement parts are necessary, use only genuine Centr replacement parts and hardware. Failure to use genuine replacement parts can cause a risk to users, keep the machine from operating correctly and will void the warranty.
- Be sure that all warning stickers and instructional placards applied to the product are present and in good condition when doing maintenance or replacing components. If at any time the Warning labels become loose, unreadable or dislodged, replace the labels.
- Do not try to change the design or functionality of the machine being serviced as this can adversely effect user safety and will void the warranty.
- Do not use the machine until all shrouds, instructions, warning labels and correct functionality have been verified and tested for correct performance.
Parts Diagrams
The following sections provide visual representations of the treadmill's components.
Treadmill Overview Diagram: A line illustration of the Centr Inspire Series T7 & T7S treadmill, showcasing the main components: a long running deck with a belt, a front motor cover, a console unit mounted on an upright structure, and handrails extending from the console.
Console and Frame Assembly Diagram: An exploded view illustrating the assembly of the treadmill's main frame, deck, and console support structure. Key components include the base frame, running deck with bumpers and rollers, side platforms, motor cover, and the console mast assembly.
Console and Handrail Components Diagram: An exploded view detailing the console assembly and handrail components. Key parts include the console itself (with buttons, panels, and PCBA), handgrips, and various covers for the uprights and console.
Parts List
| PART NUMBER | DESCRIPTION | QTY. |
|---|---|---|
| 80319 | HARDWARE CARD, CENTR T7 | 1 |
| 103206 | WASHER, RAIL MOUNT | 8 |
| 103304 | ASSY, TM LUBRICATION, 30mL BOTTLE & NOZZLE | 1 |
| 104993 | BELT, MICRO-V, 220J8 | 1 |
| 105224 | ASSY, BASE FRAME | 1 |
| 105225 | WHEEL, FRONT TRANSPORT | 2 |
| 105226 | BUMPER, BASE FRAME | 2 |
| 105228 | BELT, RUNNING | 1 |
| 105229 | ASSY, RUNNING DECK | 1 |
| 105230 | ROLLER, FRONT, 60 DIA | 1 |
| 105231 | ROLLER, REAR, 60 DIA | 1 |
| 105232 | BUMPER, RUNNING DECK | 6 |
| 105240 | ASSY, SIDE PLATFORM, LH | 1 |
| 105241 | ASSY, SIDE PLATFORM, RH | 1 |
| 105243 | COVER, REAR, RH | 1 |
| 105244 | COVER, CENTER BELT GUARD | 1 |
| 105245 | COVER, REAR, LH | 1 |
| 105246 | COVER, REAR FLOOR LEVELER | 2 |
| 105247 | FLOOR LEVELER | 2 |
| 105252 | ASSY, UPRIGHT FRAME | 1 |
| 105253 | COVER, MOTOR | 1 |
| 105254 | COVER, FRONT SIDE, LH | 1 |
| 105255 | COVER, FRONT SIDE, RH | 1 |
| 105257 | COVER, FRONT POWER PANEL | 1 |
| 105258 | ASSY, CONSOLE BASE AND HANDRAILS | 1 |
| 105259 | COVER, CENTER CONSOLE, TOP | 1 |
| 105260 | ASSY, CENTER CONSOLE TOP COVER | 1 |
| 105262 | ASSY, CENTER CONSOLE BOTTOM COVER | 1 |
| 105264 | HANDRAIL GRIP, LH | 1 |
| 105265 | HANDRAIL GRIP, RH | 1 |
| 105266 | COVER, UPRIGHT INSIDE, LH | 1 |
| 105267 | COVER, UPRIGHT INSIDE, RH | 1 |
| 105278 | ASSY, REMOVABLE SAFETY KEY, SCREW TETHER | 1 |
| 105281 | CENTER CONSOLE, BACK PLATE | 1 |
| 105282 | ASSY, CENTER CONSOLE | 1 |
| 105283 | BUTTONS, START AND STOP | 1 |
| 105284 | CONSOLE LEFT PANEL, INCLINE | 1 |
| 105285 | CONSOLE RIGHT PANEL, SPEED | 1 |
| 105286 | WIRELESS CHARGING PAD | 1 |
| 105291 | ASSY, HAND GRIP ADJUSTMENT LEVER | 2 |
| 105292 | HANDGRIP, METAL, LH | 1 |
| 105293 | HANDGRIP, METAL, RH | 1 |
| 105294 | COVER, INCLINE ADJ, TOP, LH | 1 |
| 105295 | COVER, INCLINE ADJ, BTM, LH | 1 |
| 105296 | COVER, SPEED ADJ, TOP, RH | 1 |
| 105297 | COVER, SPEED ADJ, BTM, RH | 1 |
| 105298 | COVER, SIDERAIL, LH | 1 |
| 105299 | COVER, SIDERAIL, RH | 1 |
| 105300 | ASSY, CONSOLE MAST | 1 |
| 105301 | COVER, CONSOLE MAST, REAR | 1 |
Electrical Wiring Diagrams
The following diagrams illustrate the electrical connections for the Centr Inspire Series treadmills.
Electrical Wiring Diagram (110V Machines)
110V Electrical Wiring Schematic: This diagram shows the electrical connections for the 110V version of the Centr Inspire Series treadmill. It maps out the pathways for power and data between key components including the display mast, console PCBA, running belt motor, incline lift motor, AC motor drive inverter, power converter, and various cables. Connections are shown from the base to the upright and console sections, indicating how these parts are electrically integrated.
Electrical Wiring Diagram (220V Machines)
220V Electrical Wiring Schematic: This diagram illustrates the electrical connections for the 220V version of the Centr Inspire Series treadmill. It is similar to the 110V diagram but specifies components relevant to 220V operation, such as the 220V AC motor drive inverter and potentially different power cord types. It details the integration of components like the display mast, console PCBA, motors, power converter, and associated wiring.
Electrical Parts List (110V Machines)
| PART NUMBER | DESCRIPTION | QTY. |
|---|---|---|
| 103153 | WIRE, GROUND, GREEN-YELLOW, 16AWG, 600mm | 1 |
| 103156 | WIRE, BROWN, 14AWG, 100mm | 2 |
| 103174 | RECEPTACLE, POWER, C14, 16A | 1 |
| 103216 | CORD, POWER, TYPE B | 1 |
| 103259 | FILTER, YB35D5-15A-Q | 1 |
| 103272 | WIRE, BLUE, 14AWG, 150mm | 1 |
| 103276 | PCBA, BT | 1 |
| 103277 | CABLE, BT, 200mm | 1 |
| 104503 | ASSY, REMOVABLE SAFETY KEY, FEMALE | 1 |
| 105235 | MOTOR, RUNNING BELT, 2.5HP | 1 |
| 105236 | MOTOR, INCLINE LIFT, 1/10HP, 110V | 1 |
| 105237 | ASSY, AC MOTOR DRIVE INVERTOR, 110V | 1 |
| 105291 | ASSY, HAND GRIP ADJUSTMENT LEVER | 2 |
| 105304 | COUPLER, ETHERNET, FEMALE TO FEMALE | 4 |
| 105305 | CABLE, ETHERNET, 700mm | 1 |
| 105306 | CABLE, ETHERNET, 1200mm | 1 |
| 105307 | CABLE, ETHERNET, 350mm | 1 |
| 105308 | CABLE, CONSOLE PCBA TO MAST, 500mm | 1 |
| 105309 | PCBA, T7B CONSOLE | 1 |
| 105310 | CABLE, ETHERNET, 450mm | 1 |
| 105311 | CABLE, CONSOLE PCBA TO MAST, 250mm | 1 |
| 105312 | CABLE, CONSOLE PCBA TO HR GRIPS, BRANCHED 400mm 750mm | 1 |
| 105313 | CABLE, CONSOLE PCBA TO HR GRIPS, 400mm | 2 |
| 105314 | CABLE, INCLINE LEFT ADJ SWITCH, 200mm | 1 |
| 105315 | CABLE, INCLINE LEFT ADJ SWITCH, 400mm | 1 |
| 105316 | PCBA, WIRELESS CHARGING PAD | 1 |
| 105317 | CABLE, WIRELESS CHARING PAD, 550mm | 1 |
| 105318 | CABLE, WIRELESS CHARGING PAD, 1200mm | 1 |
| 105319 | CABLE, WIRELESS CHARGING PAD, 700mm | 1 |
| 105320 | CABLE, CONSOLE PCBA, COMM & POWER, 500mm | 1 |
| 105321 | CABLE, CONSOLE PCBA, COMM & POWER, 1200mm | 1 |
| 105322 | CABLE, CONSOLE PCBA, COMM & POWER, 700mm | 1 |
| 105324 | PCBA, COMM & POWER REDISTRIBUTION | 1 |
| 105325 | POWER CONVERTOR, AC TO DC | 1 |
| 105326 | WIRE, GROUND, GREEN-YELLOW, 16AWG, 150mm | 1 |
| 105327 | CABLE, BLUE-BROWN, BRANCHED 450mm | 1 |
| 105328 | CABLE, SWITCH TO ADAPTER & FITLER, BRANCHED 300mm 600mm | 1 |
| 105329 | CABLE, POWER REDISTRIBUTION TO INVERTOR, 800mm | 1 |
| 105571 | FUSE, OVERLOAD PROTECTOR, 15A | 1 |
| 105614 | SWITCH, POWER ON/OFF, 20A | 1 |
| 105615 | CABLE, SPEED RIGHT ADJ SWITCH, 200mm | 1 |
| 105616 | CABLE, SPEED RIGHT ADJ SWITCH, 400mm | 1 |
Electrical Parts List (220V Machines)
| PART NUMBER | DESCRIPTION | QTY. |
|---|---|---|
| 103153 | WIRE, GROUND, GREEN-YELLOW, 16AWG, 600mm | 1 |
| 103156 | WIRE, BROWN, 14AWG, 100mm | 2 |
| 103172 | SWITCH, POWER ON/OFF, 16A | 1 |
| 103173 | FUSE, OVERLOAD PROTECTOR, 12A | 1 |
| 103174 | RECEPTACLE, POWER, C14, 16A | 1 |
| 103259 | FILTER, YB35D5-15A-Q | 1 |
| 103272 | WIRE, BLUE, 14AWG, 150mm | 1 |
| 103276 | PCBA, BT | 1 |
| 103277 | CABLE, BT, 200mm | 1 |
| 104503 | ASSY, REMOVABLE SAFETY KEY, FEMALE | 1 |
| 103565 | CORD, POWER, TYPE E | 1 |
| 103566 | CORD, POWER, TYPE I | 1 |
| 103567 | CORD, POWER, TYPE K | 1 |
| 103568 | CORD, POWER, TYPE G | 1 |
| 103569 | CORD, POWER, TYPE J | 1 |
| 104671 | INDUCTOR, 2.2kW, PFC-10A-4.0 | 1 |
| 105235 | MOTOR, RUNNING BELT, 2.5HP | 1 |
| 105291 | ASSY, HAND GRIP ADJUSTMENT LEVER | 2 |
| 105304 | COUPLER, ETHERNET, FEMALE TO FEMALE | 4 |
| 105305 | CABLE, ETHERNET, 700mm | 1 |
| 105306 | CABLE, ETHERNET, 1200mm | 1 |
| 105307 | CABLE, ETHERNET, 350mm | 1 |
| 105308 | CABLE, CONSOLE PCBA TO MAST, 500mm | 1 |
| 105309 | PCBA, T7B CONSOLE | 1 |
| 105310 | CABLE, ETHERNET, 450mm | 1 |
| 105311 | CABLE, CONSOLE PCBA TO MAST, 250mm | 1 |
| 105312 | CABLE, CONSOLE PCBA TO HR GRIPS, BRANCHED 400mm 750mm | 1 |
| 105313 | CABLE, CONSOLE PCBA TO HR GRIPS, 400mm | 2 |
| 105314 | CABLE, INCLINE LEFT ADJ SWITCH, 200mm | 1 |
| 105315 | CABLE, INCLINE LEFT ADJ SWITCH, 400mm | 1 |
| 105316 | PCBA, WIRELESS CHARGING PAD | 1 |
| 105317 | CABLE, WIRELESS CHARING PAD, 550mm | 1 |
| 105318 | CABLE, WIRELESS CHARGING PAD, 1200mm | 1 |
| 105319 | CABLE, WIRELESS CHARGING PAD, 700mm | 1 |
| 105320 | CABLE, CONSOLE PCBA, COMM & POWER, 500mm | 1 |
| 105321 | CABLE, CONSOLE PCBA, COMM & POWER, 1200mm | 1 |
| 105322 | CABLE, CONSOLE PCBA, COMM & POWER, 700mm | 1 |
| 105324 | PCBA, COMM & POWER REDISTRIBUTION | 1 |
| 105325 | POWER CONVERTOR, AC TO DC | 1 |
| 105326 | WIRE, GROUND, GREEN-YELLOW, 16AWG, 150mm | 1 |
| 105327 | CABLE, BLUE-BROWN, BRANCHED 450mm | 1 |
| 105328 | CABLE, SWITCH TO ADAPTER & FITLER, BRANCHED 300mm 600mm | 1 |
| 105329 | CABLE, POWER REDISTRIBUTION TO INVERTOR, 800mm | 1 |
| 105336 | MOTOR, INCLINE LIFT, 1/10HP, 220V | 1 |
| 105337 | ASSY, AC MOTOR DRIVE INVERTOR, 220V | 1 |
| 105339 | WIRE, BLUE, 14AWG, 600mm | 1 |
| 105615 | CABLE, SPEED RIGHT ADJ SWITCH, 200mm | 1 |
| 105616 | CABLE, SPEED RIGHT ADJ SWITCH, 400mm | 1 |
Fitness App & Wellness Programs Inspired by Chris Hemsworth | Centr
