Manuals+

Centr Inspire Series T4 & T4S Service Manual

Models: T4B-110.1, T4B-220.1

IMPORTANT: RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

Manual to be used for Unit Serial Number Range:

Starting S/N: T4B-110.1-9-25-06-001273

Starting S/N: T4B-220.1-9-24-10-000001

MADE IN CHINA

Important Safety Instructions

DANGER

To reduce the risk of electrical shock, disconnect the power cord from the outlet and machine and wait 5 minutes before servicing this product. Any diagnosis or repairs of this product should be done by a trained service technician or an individual who is aware of proper safety procedures. If proper safety procedures are not followed, an electric shock is possible. Store the power cord in a secure location.

WARNING!

To reduce the risk of burns, fire, electric shock, or injury to persons:

  1. Read and understand the Important Safety Instructions before working on the machine. Failure to obey the instructions and safety warnings could cause injury to the service technician or bystanders.
  2. Keep bystanders, children and pets away from the product being serviced at all times.
  3. Make sure that the repair is done in an appropriate work space away from foot traffic and exposure to bystanders.
  4. Be aware that as hardware is removed from parts on this machine, the loose parts may need to be supported or damage to you or the machine may occur. Be sure to be prepared to support the weight of the part before fully removing any hardware when servicing the machine. If necessary, use a second person to assist with supporting the part.
  5. Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do maintenance steps involving these components. Do not try to do heavy or awkward steps on your own.
  6. If replacement parts are necessary, use only genuine Centr replacement parts and hardware. Failure to use genuine replacement parts can cause a risk to users, keep the machine from operating correctly and will void the warranty.
  7. Be sure that all warning stickers and instructional placards applied to the product are present and in good condition when doing maintenance or replacing components. If at any time the Warning labels become loose, unreadable or dislodged, replace the labels.
  8. Do not try to change the design or functionality of the machine being serviced as this can adversely effect user safety and will void the warranty.
  9. Do not use the machine until all shrouds, instructions, warning labels and correct functionality have been verified and tested for correct performance.

Parts Diagrams

A detailed parts diagram is provided to help identify components of the Centr Inspire Series T4 and T4S treadmills. The diagram shows various assemblies and individual parts with corresponding part numbers.

Parts List

The following table lists the parts for the Centr Inspire Series T4 and T4S treadmills:

PART NUMBER DESCRIPTION QTY.
103165BELT, RUNNING1
103166DECK, RUNNING1
103167ROLLER, FRONT, 46 DIA1
103168ROLLER, REAR, 46 DIA1
103170MOTOR, RUNNING BELT, 1.5HP1
103176BUMPER, RUNNING DECK6
103177WHEEL, TRANSPORT2
103178BUMPER, BASE FRAME2
103196BUMPER, FOOT4
103206WASHER, RAIL MOUNT8
103209PLUG, 25 X 50 X 132
103210COVER, TRANSPORT WHEEL2
103284FOAM STRIP, 20 X 1300 X 22
103304ASSY, TM LUBRICATION, 30mL BOTTLE & NOZZLE1
104038RUBBER WHEEL2
104437COVER, REAR WHEEL2
104507ASSY, REMOVABLE SAFETY KEY1
105283BUTTONS, START AND STOP1
105334ASSY, BASE FRAME1
105341ASSY, UPRIGHT, LH1
105342WLDMT, UPRIGHT, RH1
105345ASSY, REAR COVER, LH1
105346ASSY, REAR COVER, RH1
105347ASSY, SIDE PLATFORM, RH1
105348ASSY, SIDE PLATFORM, LH1
105349ASSY, SIDERAIL COVER, RH1
105350ASSY, SIDERAIL COVER, LH1
105358COVER, FRONT SIDE, RH1
105361COVER, FRONT SIDE, LH1
105363ASSY, MOTOR COVER1
105364ASSY, MOTOR BTM TRAY, 110V (FOR 110V MACHINE)1
105398ASSY, MOTOR BTM TRAY, 220V (FOR 220V MACHINE)1
105365ASSY, COVER, UPRIGHT BASE, RH1
105366ASSY, COVER, UPRIGHT BASE, LH1
105367ASSY, CONSOLE BASE AND HANDRAILS1
105368ASSY, CENTER CONSOLE TOP COVER1
105369COVER, CENTER CONSOLE, TOP1
105372COVER, CENTER CONSOLE TOP1
105373ASSY, CENTER CONSOLE1
105374RUBBER DEVICE PAD1
105375HANDRAIL GRIP, LH1
105376HANDRAIL GRIP, RH1
105378ASSY, CENTER CONSOLE BOTTOM COVER1
105379COVER, UPRIGHT INSIDE, LH1
105380COVER, UPRIGHT INSIDE, RH1
105386ASSY, BELT LUBRICATION TRAY1
105388CENTER CONSOLE, BACK PLATE1
105389CONSOLE RIGHT PANEL, SPEED1
105390CONSOLE LEFT PANEL, INCLINE1
105391WLDMT, INCLINE FRAME1
105392AIR CYLINDER, DECK LIFT1
105393COVER, BELT LUBRICATION PORT1
105394BELT, J7, 1701
80334HARDWARE CARD, CENTR T4B1

Electrical Wiring Diagram (110V Machines)

The following diagram illustrates the electrical connections for the 110V Centr Inspire Series T4 and T4S models. It details the wiring between components such as the motor control board, incline motor, running belt motor, touch screen, and power inlet.

Key Components:

The diagram shows connections for the touch screen, BT board, incline motor, running belt motor, motor control board, power switch, fuse, and power inlet, along with ferrite rings and filters for signal integrity and power conditioning.

Electrical Parts List (110V Machines)

This list details the electrical components used in the 110V versions of the Centr Inspire Series T4 and T4S treadmills:

PART NUMBER DESCRIPTION QTY.
103147FERRITE CORE1
103149CABLE, COMM, UPRIGHT-CONSOLE, 700mm1
103150CABLE, DATA, LCB-UPRIGHT, 1800mm1
103153WIRE, GROUND, GREEN-YELLOW, 16AWG, 100mm1
103156WIRE, BROWN, 14AWG, 100mm2
103170MOTOR, RUNNING BELT, 1.5HP1
103171MOTOR, INCLINE LIFT, 1/15HP, 110V1
103172SWITCH, POWER ON/OFF, 16A1
103173FUSE, OVERLOAD PROTECTOR, 12A1
103174RECEPTACLE, POWER, C14, 16A1
103215ASSY, MOTOR CONTROL BOARD1
103216CORD, POWER, TYPE B1
103259FILTER, YB35D5-15A-Q1
103270WIRE, GROUND, GREEN-YELLOW, 16AWG, 600mm1
103271WIRE, GROUND, GREEN-YELLOW, 16AWG, 400mm1
103272WIRE, BLUE, 14AWG, 150mm1
103273CABLE, DOUBLE BRANCH WIRE, 600mm1
103276PCBA, BT1
103277CABLE, BT, 200mm1
104503ASSY, REMOVABLE SAFETY KEY, FEMALE1
104728FERRITE RING, EMI SUPPRESSION, 18 X 33 X 131
104729FERRITE RING, EMI SUPPRESSION, 22.5 X 41 X 171
105327CABLE, BLUE-BROWN, BRANCHED 450mm1
105381РСВА, Т4B CONSOLE1
105387RUBBER SPACER, REMOVABLE SAFETY KEY1
105396CABLE, CONSOLE PCBA TO MAST, 300mm1
105397CABLE, CONSOLE TO MAST, 300mm1

Electrical Wiring Diagram (220V Machines)

The following diagram outlines the electrical connections for the 220V Centr Inspire Series T4 and T4S models. It details the wiring between components such as the motor control board, incline motor, running belt motor, touch screen, and power inlet.

Key Components:

The diagram shows connections for the touch screen, BT board, incline motor, running belt motor, motor control board, power switch, fuse, inductor, and power inlet, along with ferrite rings for signal integrity.

Electrical Parts List (220V Machines)

This list details the electrical components used in the 220V versions of the Centr Inspire Series T4 and T4S treadmills:

PART NUMBER DESCRIPTION QTY.
103147FERRITE CORE1
103149CABLE, COMM, UPRIGHT-CONSOLE, 700mm1
103150CABLE, DATA, LCB-UPRIGHT, 1800mm1
103153WIRE, GROUND, GREEN-YELLOW, 16AWG, 100mm1
103156WIRE, BROWN, 14AWG, 100mm2
103170MOTOR, RUNNING BELT, 1.5HP1
103172SWITCH, POWER ON/OFF, 16A1
103174RECEPTACLE, POWER, C14, 16A1
103259FILTER, YB35D5-15A-Q1
103270WIRE, GROUND, GREEN-YELLOW, 16AWG, 600mm1
103271WIRE, GROUND, GREEN-YELLOW, 16AWG, 400mm1
103272WIRE, BLUE, 14AWG, 150mm1
103273CABLE, DOUBLE BRANCH WIRE, 600mm1
103275WIRE, BLUE, 14AWG, 300mm1
103276PCBA, BT1
103277CABLE, BT, 200mm1
103565CORD, POWER, TYPE E1
103566CORD, POWER, TYPE I1
103567CORD, POWER, TYPE K1
103568CORD, POWER, TYPE G1
103569CORD, POWER, TYPE J1
104503ASSY, REMOVABLE SAFETY KEY, FEMALE1
104636ASSY, MOTOR CONTROL BOARD, 220V1
104671INDUCTOR, 2.2kW, PFC-10A-4.01
104679MOTOR, INCLINE LIFT, 1/15HP, 220V1
104719FUSE, OVERLOAD PROTECTOR, 8A1
104728FERRITE RING, EMI SUPPRESSION, 18 X 33 X 131
104729FERRITE RING, EMI SUPPRESSION, 22.5 X 41 X 171
105381РСВА, T4B CONSOLE1
105387RUBBER SPACER, REMOVABLE SAFETY KEY1
105396CABLE, CONSOLE PCBA TO MAST, 300mm1
105397CABLE, CONSOLE TO MAST, 300mm1
Models: Inspire Series, Inspire Series Treadmill, Treadmill

File Info : application/pdf, 12 Pages, 1.47MB

PDF preview unavailable. Download the PDF instead.

80420-EN-V2025-06-30 SM T4B-110 and 220 ?v=1751918167

References

Adobe PDF Library 17.0 Adobe InDesign 20.4 (Windows)

Related Documents

Preview Centr Inspire Series T5 & T5S Treadmill Service Manual
This service manual provides detailed information for the Centr Inspire Series T5 and T5S treadmills, including parts diagrams, electrical wiring, and parts lists for both 110V and 220V models. It covers important safety instructions and component identification for maintenance and repair.
Preview Centr Inspire Series T4 Tablet Holder User Manual
User manual for the Centr Inspire Series T4 Tablet Holder, providing assembly instructions, feature overview, console modes, and safety information.
Preview Centr RUNR-S Treadmill Service Manual
Comprehensive service manual for the Centr RUNR-S treadmill, covering safety instructions, parts diagrams, parts lists, and electrical wiring diagrams for both 110V and 220V machines. Includes serial number information for applicability.
Preview Centr Inspire Series FT2 Pro Smith Functional Trainer User Manual
Comprehensive user manual for the Centr Inspire Series FT2 Pro Smith Functional Trainer, covering assembly, safety precautions, maintenance, and parts.
Preview Centr 2 Functional Trainer & Adjustable Folding Bench: User Manual and Assembly Guide
This comprehensive manual provides detailed instructions for the Centr 2 Functional Trainer and the Centr Adjustable Folding Bench, covering setup, safety precautions, assembly steps, maintenance, and parts identification for both pieces of home gym equipment.
Preview Centr 2 Functional Trainer and Adjustable Bench User Manual
Comprehensive user manual for the Centr 2 Functional Trainer and Centr Adjustable Foldable Bench, covering assembly, safety, maintenance, and product specifications. Includes support contact information and warranty details.
Preview Centr RUNR-S Treadmill User Manual
Comprehensive user manual for the Centr RUNR-S treadmill, covering safety instructions, assembly, features, console operation, maintenance, and troubleshooting.
Preview Centr 2 Home Gym Functional Trainer User Manual and Assembly Guide
Comprehensive user manual and assembly guide for the Centr 2 Home Gym Functional Trainer (Model CHG2.1). Includes safety instructions, assembly steps, maintenance schedule, parts list, dimensions, and support contact information.