Centr RUNR-S Service Manual

Important Safety Instructions

DANGER

To reduce the risk of electrical shock, disconnect the power cord from the outlet and machine and wait 5 minutes before servicing this product. Any diagnosis or repairs of this product should be done by a trained service technician or an individual who is aware of proper safety procedures. If proper safety procedures are not followed, an electric shock is possible. Store the power cord in a secure location.

WARNING!

To reduce the risk of burns, fire, electric shock, or injury to persons:

1. Read and understand the Important Safety Instructions before working on the machine. Failure to obey the instructions and safety warnings could cause injury to the service technician or bystanders.
2. Keep bystanders, children and pets away from the product being serviced at all times.
3. Make sure that the repair is done in an appropriate work space away from foot traffic and exposure to bystanders.
4. Be aware that as hardware is removed from parts on this machine, the loose parts may need to be supported or damage to you or the machine may occur. Be sure to be prepared to support the weight of the part before fully removing any hardware when servicing the machine. If necessary, use a second person to assist with supporting the part.
5. Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do maintenance steps involving these components. Do not try to do heavy or awkward steps on your own.
6. If replacement parts are necessary, use only genuine Centr replacement parts and hardware. Failure to use genuine replacement parts can cause a risk to users, keep the machine from operating correctly and will void the warranty.
7. Be sure that all warning stickers and instructional placards applied to the product are present and in good condition when doing maintenance or replacing components. If at any time the Warning labels become loose, unreadable or dislodged, replace the labels.
8. Do not try to change the design or functionality of the machine being serviced as this can adversely effect user safety and will void the warranty.
9. Do not use the machine until all shrouds, instructions, warning labels and correct functionality have been verified and tested for correct performance.

Parts Diagrams

Parts List

Electrical Wiring Diagram (110V Machines)

The diagram illustrates the electrical connections for 110V machines, detailing the pathways for power, control signals, and safety features. Key components include the console control board, safety key assembly, BT board, touch screen, incline motor, running belt motor, motor control board, power switch, fuse, power inlet, and ferrite rings for EMI suppression.

Electrical Parts List (110V Machines)

Electrical Wiring Diagram (220V Machines)

The diagram illustrates the electrical connections for 220V machines, detailing the pathways for power, control signals, and safety features. Key components include the console control board, safety key assembly, BT board, touch screen, incline motor, running belt motor, motor control board, power switch, fuse, power inlet, inductor, and ferrite rings for EMI suppression.

Electrical Parts List (220V Machines)