Welcome
Welcome to Centr and thank you for your purchase. We are pleased to have you as a customer. Please inspect your product and contact us immediately if anything is missing or damaged.
Your equipment comes with access to the Centr online membership and tools, which will boost your active lifestyle and well-being. The Centr wellness system aligns your movements, meals, and mind with expert programs and advice. Together, we can help you achieve the best results and a healthier life forever. Move with unlimited ways to fuel your routine and reach your goals!
Need Help? We Are At Your Disposal
U.S. Customers
If you have questions or issues with our equipment, please contact the U.S. customer support team. We offer assistance in Spanish and English.
Email: service@centr.com
Phone: +1 714-738-1729 (GLOBAL) Monday to Friday, 8 AM to 5 PM (PT-UTC-7 H/8 H)
We offer assistance in Spanish and English.
Global Customers (Outside U.S.A.)
If you have any questions or problems with your equipment, please contact the store where you made your purchase.
Product Warranty
For full warranty details or to register your product for warranty, visit centr.com/support (English only).
Australia
Centr products come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Our products and services come with guarantees that cannot be excluded under the Australian Consumer Law. In case of major service failures, you are entitled to:
- Cancel your service contract with us;
- A refund for the unused portion or a compensation for its reduced value.
You are also entitled to choose a refund or replacement for a major failure of products. If a failure of the products or a service does not amount to a major failure, you are entitled to have the failure rectified within a reasonable time. If you do not do so, you are entitled to a refund for the merchandise and to rescind the service contract and obtain a refund for the unused portion. You are also entitled to be compensated for any other reasonably foreseeable loss or damage arising from a failure of the goods or service.
Centr 2 Functional Trainer - Safety Notice
Precautions
This exercise machine is designed for maximum safety. However, you must take certain precautions when using exercise equipment. Ensure you read the entire manual before assembling and using your machine. Please observe the following safety precautions:
- Consult a doctor before starting an exercise program.
- Always keep children and pets away from the machine. Do not leave unsupervised children in the same room as the machine. Moving parts and wiring can cause serious injury or death if used incorrectly.
- Never let children use selectorized strength training equipment. Supervise the use of equipment by individuals aged 13-17.
- Only one person should use the machine at a time.
- If you feel dizzy, nauseous, experience chest pain, or any other abnormal symptom, STOP exercising immediately. CONSULT A DOCTOR AS SOON AS POSSIBLE.
- Place the machine on a clear, level surface. For indoor use only. Do not use the machine near water or outdoors.
- Keep hair, body, and clothing away from all moving parts.
- Always wear appropriate workout attire when exercising. Do not wear a robe or other loose clothing that could get caught in the machine. Running or training shoes are also required.
- Use the machine only for its intended purpose as described in this manual. Do not use accessories not recommended by the manufacturer.
- Do not use the machine as a support during stretching or to tie and use straps, ropes, or other items for strength training not authorized by the manufacturer.
- Do not place sharp objects around the machine.
- People with disabilities should not use the machine without the supervision of a qualified person or a doctor.
- Before using the machine for training, always perform warm-up exercises.
- Inspect the machine, including cables, belts, chains, and their connections, before use. Do not use if the machine or any part is worn, damaged, or unusable.
- The Centr 2 Functional Trainer is designed for home use only (Class H). Weight plates are not covered, meaning:
- Only one person can use the Centr 2 at a time.
- Ensure no one else is in the training area. Other people should remain at least 1.5 m (5 ft) away from the device.
- After use, secure the machine to prevent unauthorized access.
- Ensure the weight selector pin is fully inserted. Never lock weight stacks or the top plate in an elevated position. Never use the machine if it is in this state. To gradually increase weight, use only the provided progressive weight tools.
Centr 2 Functional Trainer - Assembly Instructions
Note: Before assembly, remove the nut and washer from the bolt.
Tools Required for Assembly: Allen Wrench #6 (47), Allen Wrench #5 (48), Wrenches #10 and #17 (49).
Step 1: Frame Assembly
A. Do not tighten nuts and bolts until instructed. Refer to the tools required list.
B. Connect the central vertical post (No. 4) to the right and left stations (No. 1 and No. 2).
C. Secure the lower horizontal part with M10 x 130 bolts (No. 41), M10 washers (No. 25), and M10 nuts (No. 24). Install the lower vertical part with M10 x 25 bolts (No. 20), M10 lock washers (No. 23), and M10 washers (No. 25).
D. Secure the upper horizontal part with M10 x 95 bolts (No. 42), M10 washers (No. 25), and M10 nuts (No. 24). Install the upper vertical part with M10 x 25 bolts (No. 20), M10 lock washers (No. 23), and M10 washers (No. 25).
E. Install the pull-up bar (No. 3). Tighten it with M10 x 25 bolts (No. 20), M10 lock washers (No. 23), and M10 washers (No. 25).
F. Tighten all installed bolts and nuts.
Step 2: Weight Stack and Pulley System
A. Install the guide bars (No. 7) into the frame. Secure them with M10 x 80 bolts (No. 18) and M10 washers (No. 25). Tighten all.
B. Install the rubber guards (No. 16) onto the guide bars (No. 7). Install 15 weight plates (No. 10) from the top of the guide bars (No. 7) to the rubber guards (No. 16). Ensure the cut-out label on the weight plate faces inward and the pads face down. Refer to the example illustration.
C. Remove pre-installed M10 x 20 bolts (No. 21), M10 lock washers (No. 23), and Ø 10 washers (No. 25) holding the guide bar support (No. 6). Slide the weight selection bar assembly (No. 8) onto the guide bars (No. 7). Install the weight stack pulley (No. 33) with the cable wound between the pulley and the U-shaped bracket (No. 31). Insert the cam bolt (No. 32) and secure it with an M10 washer (No. 25) and an M10 nut (No. 24).
D. Hold the weight selection bar assembly (No. 8) above the weight stack to install the guide bar clamp (No. 6) onto the guide bars (No. 7).
E. Press the guide bar clamp (No. 6) upwards onto the vertical support.
F. Tighten the clamp with M10 x 20 bolts (No. 21), M10 lock washers (No. 23), and M10 washers (No. 25).
G. Lower the weight selection bar to the top of the weight stack.
H. Check all cables to ensure they are on the pulley track.
I. Place the weight number labels (No. 26). Start with Number 1 on the weight selection bar.
J. Install the weight selection pin (No. 9) into the weight stack.
K. Lubricate the guide bars with the provided Super Lube or Lube.
L. Adjust cable tension by loosening and rotating the cam bolt (No. 32) until the weight selection bar assembly (No. 8) begins to lift slightly off the weight stack. Tighten the cam bolt nut to secure its position.
M. Repeat steps for the opposite side.
Step 3: Textile Covers and Logos
A. Install clamp (No. 34) onto textile covers 1, 2, 3 (No. 36, 37, 38). Install clamp (No. 35) onto textile covers 1, 2 (No. 36, 37). First, secure the top part with an M8 x 15 bolt (No. 39) and an M8 washer (No. 40), then screw in the lower clamp. Repeat for the opposite side.
B. Refer to the illustration for orientation.
C. Install the Centr logo plates (No. 5) on the top of the covers.
Step 4: Accessories and Final Touches
A. Install the tablet holder and secure it with an M6x75 mm bolt (No. 28), an M6 lock nut (No. 30), and M6 washers (No. 29). Tighten the parts.
B. Install accessory clamps (No. 43, No. 44) onto the central tube and secure them with M10x70 bolts (No. 19), M10 washers (No. 25), and M10 nuts (No. 24).
C. Store the wavy bar (No. 12) and the rope (No. 11) on the suspension mount, behind the upper cross support (No. 4). Hang the pull-up belt (No. 14) on the upper cross support (No. 4).
Centr 2 Functional Trainer - Area of Use
Required Space: 2.4 m (Width) x 2.7 m (Height/Clearance)
Centr 2 Functional Trainer - Product Dimensions
Dimensions:
- Height: 2 m
- Length: 1.3 m
- Width: 1.1 m
Centr 2 Functional Trainer - Maintenance
WARNING
DO NOT place extruded polystyrene or printed materials on the orthopedic seat cushions. Over time, these can adhere to the cushions and damage the surface.
DO NOT leave objects on the orthopedic seat cushions, as they have a special density that conforms to the shape of objects, and small objects leave marks on the surface that can be difficult to remove.
- Periodically inspect cables for breaks, cracks, or fraying. Replace cables immediately at the first sign of damage or wear. Never use equipment with damaged or worn cables.
- Cables naturally stretch over time. Therefore, periodically check their slack and adjust tension as needed.
- Regularly inspect the product for loose structures.
- Do not use or store the equipment outdoors.
- Inspect pressure links, pivots, levers, and weight stack pins for wear or damage. If worn or damaged, replace only with Inspire Fitness parts.
- Locate all home exercise equipment warning decals and familiarize yourself with them.
- Replace any damaged or worn upholstery immediately.
- Periodically clean guide bars with a dry cloth and reapply a thin layer of Teflon-based lubricant.
Maintenance Schedule
| Routine | In-Home Maintenance | Date Performed |
|---|---|---|
| Inspect links, pull pins, spring hooks, pivots, and weight stack pins. | WEEKLY | |
| Clean upholstery. | WEEKLY | |
| Inspect cables and their accessories. | WEEKLY | |
| Inspect tension of all ropes. | WEEKLY | |
| Inspect accessory bars and handles. | 3 MONTHS | |
| Inspect all labels. | 3 MONTHS | |
| Inspect all bolts and nuts. Adjust as necessary. | 3 MONTHS | |
| Inspect anti-slip surfaces. | 3 MONTHS | |
| Clean and lubricate guide bars with Teflon-based lubricant. | 3 MONTHS | |
| Lubricate seat sleeves and all plastic sliding parts. | 3 MONTHS | |
| Clean and wax all shiny finishes. | ANNUAL | |
| Replace cables, belts, and connection parts. | 2 YEARS |
Centr 2 Functional Trainer - Parts Diagram & List
Refer to the Parts List below for detailed information on each component.
| No. | Description | Part Number | Qty. |
|---|---|---|---|
| 1 | Right Station Assembly | 105800 | 1 |
| 2 | Left Station Assembly | 105801 | 1 |
| 3 | Pull Bar Frame Assembly | 105802 | 1 |
| 4 | Center Frame Bar Assembly | 105803 | 1 |
| 5 | Centr Logo Plate | 105817 | 1 |
| 6 | Guide Bar Clamp | 105809 | 2 |
| 7 | Guide Bar | 103665 | 4 |
| 8 | Weight Selection Bar Assembly | 102621 | 2 |
| 9 | Weight Selection Pin | 102629 | 2 |
| 10 | Weight Plates | 102626 | 30 |
| 11 | Rope | 105804 | 1 |
| 12 | Wavy Bar Double Hook | 105807 | 1 |
| 13 | Individual Handle | 105806 | 2 |
| 14 | Pull-up Belt | 105805 | 1 |
| 15 | Height Adjustment Handle | 104453 | 2 |
| 16 | Rubber Guard | 102582 | 4 |
| 17 | Carabiner 80 x 40 | 105808 | 2 |
| 18 | Allen Bolt M10×80 | 104243 | 4 |
| 19 | Allen Bolt M10×70 | 105822 | 2 |
| 20 | Allen Bolt M10×25 | 105823 | 8 |
| 21 | Allen Bolt M10×20 | 105824 | 4 |
| 23 | Lock Washer No. 10 | 105825 | 8 |
| 24 | Nut M10 | 105821 | 6 |
| 25 | Flat Washer No. 10 | 103312 | 24 |
| 26 | Resistance Label Set | 2 | |
| 27 | Tablet Holder | 102338 | 1 |
| 28 | Bolt M6×75 | 102400 | 1 |
| 29 | Flat Washer No. 6 | 102401 | 2 |
| 30 | Nut M6 | 102402 | 1 |
| 31 | Pulley Support | 103589 | 2 |
| 32 | Flat Washer - Guide Bar Protection | 105826 | 2 |
| 33 | Pulley | 102535 | 2 |
| 34 | Cover Clamp 1 | 105812 | 6 |
| 35 | Left Cover Clamp | 105813 | 2 |
| 36 | Textile Covers 1 | 105814 | 2 |
| 37 | Textile Covers 2 | 105815 | 2 |
| 38 | Textile Covers 3 | 105816 | 2 |
| 39 | Bolt M8x15 | 103854 | 16 |
| 40 | Flat Washer M8 | 102393 | 16 |
| 41 | Allen Bolt M10 x 130 | 102669 | 2 |
| 42 | Allen Bolt M10 x 95 | 104855 | 2 |
| 43 | Accessory Mount 1 | 105820 | 1 |
| 44 | Accessory Mount 2 | 105821 | 1 |
| 45 | Right Cover Clamp | 105822 | 1 |
Tools List
| No. | Description | Quantity |
|---|---|---|
| 47 | Allen Wrench No. 6 | 1 |
| 48 | Allen Wrench No. 5 | 1 |
| 49 | Wrench No. 10 and No. 17 | 1 |
Centr Adjustable Folding Bench - User Manual
Safety Precautions
This exercise bench is designed for maximum safety. However, certain precautions must be taken when using exercise equipment. Be sure to read the entire manual before assembling or using your bench. Pay particular attention to the following safety precautions:
- Always keep children and pets away from the bench.
- The bench should be used by only one person at a time.
- If you experience dizziness, nausea, chest pain, or any other abnormal symptom, STOP exercising immediately. Consult a doctor.
- Position the bench on a clear, level surface. Do not use the bench outdoors.
- Keep hands away from all moving parts.
- Always wear appropriate workout attire during exercise. Running or aerobic shoes are also required when using the bench.
- Use the bench only for its intended use, as described in this manual.
- Individuals with disabilities should not use the bench without the assistance of a qualified person or a doctor.
- Before using the bench, perform stretching exercises for a proper warm-up.
- Do not use this bench if it is not functioning correctly.
- The presence of an observer during exercise is recommended.
- The maximum user weight on the bench is 136 kg / 300 lb. This means a single person's weight can be up to 136 kg / 300 lb. The total weight capacity the bench can support is 226.8 kg / 500 lb.
Centr Adjustable Folding Bench - General Maintenance Information
- Regularly inspect the product for loose structures.
- Do not use or store the equipment outdoors or exposed to the elements.
- Locate all home exercise equipment warning decals and familiarize yourself with them.
- Replace any damaged or worn upholstery immediately.
Centr Adjustable Folding Bench - Label Placement
Centr Adjustable Folding Bench - Operation
This bench is designed for adult use only. Do not let children play with the bench. Exercise caution when adjusting the bench or training with it.
Folding/Unfolding Legs: Pull the spring-loaded pin to unfold or fold the legs. Ensure your hands are not in the pivot area. Make sure the spring-loaded pin is fully inserted into the locking holes after each adjustment.
Adjusting Backrest: Turn the locking lever under the cushion to release the backrest. Lift the head end of the backrest so that the free end of the support tube slides into a slot to reach the desired position. Before using the equipment, ensure the support tube is firmly in a slot.
When the folding bench is in a flat position, keep hands away from the pivot or closing area. Ensure the locking lever is engaged on the hitch pin before moving the equipment.
Centr Adjustable Folding Bench - Parts Diagram
Distributor Information
Distributed by:
- Costco Wholesale Corporation
P.O. Box 34535
Seattle, WA 98124-1535
USA
1-800-774-2678
www.costco.com - Costco Wholesale UK Ltd / Costco Online UK Ltd
Hartspring Lane
Watford, Herts
WD25 8JS
United Kingdom
01923 213113
www.costco.co.uk - Costco Wholesale Japan Ltd.
2 Kakuchi, 2 Gaiku, Kaneda-Nishi
361 Urikura, Kisarazu shi
Chiba, 292-0007 Japan
0570-200-800
www.costco.co.jp - Costco Wholesale Sweden AB
Box 614
114 11 Stockholm
Sweden
www.costco.se - Costco Wholesale Canada Ltd.*
415 W. Hunt Club Road
Ottawa, Ontario
K2E 1C5, Canada
1-800-463-3783
www.costco.ca
*doing business as les Entrepôts Costco in Quebec - Costco Wholesale Spain S.L.U.
Polígono Empresarial Los Gavilanes
C/ Agustín de Betancourt, 17
28906 Getafe (Madrid) España
NIF: B86509460
900 111 155
www.costco.es - Costco Wholesale Korea, Ltd.
40, Iljik-ro
Gwangmyeong-si
Gyeonggi-do, 14347, Korea
1899-9900
www.costco.co.kr - Imported by: Importadora Primex S.A. de C.V.
Blvd. Magnocentro No. 4
San Fernando La Herradura
Huixquilucan, Estado de México
C.P. 52765
RFC: IPR-930907-S70
(55)-5246-5500
www.costco.com.mx - Costco Wholesale Iceland ehf.
Kauptún 3-7, 210 Gardabaer
Iceland
www.costco.is - Costco Wholesale New Zealand Limited
2 Gunton Drive
Westgate
Auckland 0814
New Zealand
www.costco.co.nz - Costco Wholesale Australia Pty Ltd
17-21 Parramatta Road
Lidcombe NSW 2141
Australia
www.costco.com.au - Costco France
1 avenue de Bréhat
91140 Villebon-sur-Yvette
France
01 80 45 01 10
www.costco.fr - Costco (China) Investment Co., Ltd.
Room 01 Mezzanine
No. 5178, Kang Xin Highway
Pudong New District
Shanghai
China 201315
+86-21-6257-7065
