5th Wheel Electric Scooter G11 Max USER MANUAL

Welcome

Thank you for choosing the 5th Wheel Electric Scooter. Please enjoy the pleasure brought by this scooter.

The electric scooter is a sports and entertainment tool, rather than a means of transportation. However, once you drive it into a public area (if it is allowed by your regional and national laws and regulations), it will also have the attributes of a means of transportation. Therefore, there are possible safety risks of all vehicles. Driving in strict accordance with the instructions set forth in this manual will protect you and others to the greatest extent, and ensure that you will comply with national and provincial traffic laws and regulations.

1 Safety Instructions

Note: Before using this product, please carefully read the following important safety information. The vehicle not intended for use in high altitude locations shall indicate that they are not intended for use at elevations greater than 2000 m above sea level.

1. This electric scooter can be used by one adult only. Never carry others. [icon: prohibition]
2. Wear safety helmet and other protective equipment while using this product. [icon: checkmark]
3. Never ride this product in an unsafe or illegal place. [icon: prohibition]
4. Please practice in an open area (not on lanes) first and use this product until you are skilled in operation. [icon: checkmark]
5. Do not make dangerous actions or ride with one hand only. Keep your feet on the scooter. [icon: prohibition]
6. Avoid obstacle jumps and anticipate and adapt your trajectory and speed to those of a pedestrian before crossing these obstacles. Meanwhile, get out of the vehicle when these obstacles become dangerous due to their shape, height or slippage. Do not try to directly pass steps are higher than 1.2inch. [icon: prohibition]
7. For your safety, please control the speed to be less than 20mph. Avoid using it at night as much as possible. If you use this product at night, turn on the headlight and control the speed to 9.3 mph or less. [icon: prohibition]
8. Do not use this product at the ambient temperature below 14°F. Temperature range of cycling environment: 14°F-140°F. [icon: prohibition]
9. In the event of bumps or poor road conditions, please use this scooter slowly or get off the scooter and push it forward. [icon: checkmark]
10. Do not use this product on an oily or icy surface. [icon: prohibition]
11. To avoid damage caused by water to its electrical parts, Please Do not immerse this product at a depth of more than 1.57inch in water. [icon: prohibition]
12. Avoid using this product as much as possible in bad weather such as rain, snow and wind, to prevent unnecessary damage caused by insignificant factors. [icon: prohibition]
13. Use this product in accordance with relevant instructions in this manual. Do not use this product beyond the allowable load range. [icon: prohibition]
14. Avoid using or keeping this product at high or extremely low temperatures, or keeping this product together with flammables. [icon: prohibition]
15. The scooter is a special riding product. Please ride it on smooth roads without pits. [icon: prohibition]
16. Do not any load attached to the handlebar which will affect the stability of the vehicle. [icon: prohibition]
17. Engage the kickstand when the vehicle is not in use; Flip up the kickstand before use; Do not park the vehicle on the slope. [icon: prohibition]
18. The minimum height of the user is 55 inch, while the maximum height is no more than 86.6 inch; the maximum age of the user is 70 years old, while the minimum age is no less than 13 years old. [icon: checkmark]
19. Braking performance and friction between the tire and road deteriorates in wet conditions, so it is harder to control the speed and easier to lose control. Slow down and brake early when it is raining. [icon: prohibition]
20. WARNING Keep plastic covering away from children to avoid suffocation.
21. The user shall take the time to learn the basics of the practice to avoid any serious accident that can take place in the first month. [icon: checkmark]
22. Notify your presence when approaching a pedestrian or cyclist when you are not seen or heard. Avoid high traffic areas or overcrowded areas.
23. Cross the protected passages while walking. In all cases, take care of yourself and others.
24. Do not divert the use of the vehicle, This vehicle is not intended for acrobatic use. [icon: prohibition]
25. Caution, the brake may become hot in use. Do not touch after use. [icon: warning]
26. Eliminate any sharp edges caused by use. Do not modify or transform the vehicle, including the steering tube and sleeve, stem, folding mechanism and rear brake. [icon: prohibition]
27. The user has the obligation to always wear shoes when riding.
28. In any case, anticipate your trajectory and your speed while respecting the code of the road, the code of the sidewalk and the most vulnerable. If any, local special laws and regulations should be observed during riding of this product.

2 Introduction to Functions

1. Product Overview

Controls:

• Power/Gear
• Headlight ON/OFF Button
• Left Brake
• Headlight
• Turn Signal
• Front Reflector
• Side Reflector
• Folding Wrench
• Front Fork Shock Absorption
• 11-inch Tubeless Pneumatic Tire
• Kickstand
• Built-in Lithium Battery
• Right Brake
• Turn Signal
• Thumb Throttle
• Display
• Hook
• Charging Port
• Rubber Pedal
• Folding Clip
• 11-inch Tubeless Pneumatic Tire
• Rear Fender
• Rear Light & Reflector
• Hub Motor

*The accessories and any additional items which are not approved by the manufacturer shall not be used.

Accessories

The package includes:

• User Manual
• M5*12 Screw × 7 (1 spare)
• 3.0mm Screwdriver
• Power Cable

Note: Please check out all the items in the package carefully. If anything is missing or damaged, please contact email: aftersales@invanti.com

3 Product Display

Unfolded status: [Image of unfolded scooter]

Folded status: [Image of folded scooter]

This QR code is a video tutorial for product use. It is recommended to scan this QR code to learn more about how to use the product.

Pay attention before riding! [icon: warning]

1. Press the power key to open the scooter.
2. For safety, the factory setting of scooter is non-zero start, you need to slide the scooter to 2mph, and the throttle can be used normally.
3. The scooter can be turned on normally and cannot ride in walking mode, but can only be pushed.
4. Can't start when charging.
5. Do not throw away the manual, please refer to the manual for specific operations.
6. The suspension system have been fixed well in the manufacture, please contact with customer service if any issue occured.

4 Scooter Assembly

1. Unfold the folding mechanism of the scooter and put down the kickstand. Unfold the scooter and fix the folding mechanism. (Refer to "Folding and Carrying" for details of unfolding.) [Image of unfolding mechanism]
2. Insert the handlebar into the scooter stem. Connect the line connector in the head and riser. [Image of handlebar insertion]
3. Use the tools included in the package to tighten the screws. [Image of tightening screws]
4. After assembly, check whether the power switch can work normally. [Image of power switch check]

5 Unfolding/Folding/Carrying

1. Unfolding Operations

1. Turn the folding clip clockwise until it is fully open. [Image of unfolding step 1]
2. Pull up the body lever while opening the folding clip. [Image of unfolding step 2]
3. Turn the folder clockwise until it is fully snapped. [Image of unfolding step 3]
4. Check whether the folder key is returned to the bottom. [Image of unfolding step 4]

2. Folding Operations

Note: For safety, it is recommended to fold the scooter after it is shut down.

1. Lift the folder key up. [Image of folding step 1]
2. Rotate the folder counterclockwise while lifting the folder key. [Image of folding step 2]
3. Lower the body rod slowly. [Image of folding step 3]
4. Align it to the position of the mudguard hook, and finally hook the hook under the dashboard to the rear end of the body. [Image of folding step 4]

3. About Carrying

After folding, you can carry the scooter with one or two hands. [Image of carrying scooter]

4. About Charging

Charging Steps:

1. Open the charge port cover, insert the charge cable, and insert the power plug into the power socket. [Image of opening port and connecting cable]
2. Press the power button, battery power will be shown on the LED Display, and when fully charged, FL will be indicated. LED Display will be turned off after 10 seconds. During charging, you cannot ride the scooter. Only after you unplug the charge cable, can you ride the scooter. [Image of connecting charger]
3. Turn charging, the scooter cannot be ridden.

Charging capacity: When charging, "%" lights up and real-time display of charging progress.

The adapter is built-in, and when starting to charge, the instrument panel will display the battery level, and the % number on the instrument panel will be highlighted.

6 Riding and Parking

Preparation for riding

1. Select an appropriate riding place.
2. Unfold the scooter according to the unfolding instructions and wear protective equipment.
3. It is necessary to check that the steering system is correctly adjusted, that all connection elements (such as a folding system) are correctly tightened and not broken, and that the brakes and wheels are in good condition.

Riding

1. Press the power button to turn on the scooter.
2. Put one foot on the footboard and the other foot on the ground.
3. Make the scooter body slide forwards to 2mph and gently press the right thumb accelerator. The scooter will slowly run forwards. When the scooter is running steadily, put the other foot onto the footboard. The larger holding angle of the right thumb accelerator, the higher the speed.

Note: For the riding safety, the scooter has a non-zero start mode. The accelerator cannot be enabled until the body slides forwards for a certain distance.

Stop

Under normal circumstances, hold either brake lever on the left or right, the motor will be immediately powered off and subjected to electric braking, meanwhile the drum brake will also effect. The harder you hold, the greater the braking force you get. More safety will be provided by holding the brake levers on both sides at the same time.

7 Control System

Instrument Display

Features: Speed Unit, Pedestrian Mode, ECO Mode, D Mode, S Mode, Headlight, Battery, Wireless Connection, Alert, Real-Time Speed, Charging Capacity, Lock, Turn Signal Icon.

Disc Brake

Hold the left brake handle. The greater the pressure, the greater the braking force.

Turn Signal

Turn Signal Control: Short press the left/right button to turn the left/right turn signal on/off; Press and hold the left or right button for 3 seconds to activate the flash function. Press the left or right button to deactivate the flash function;

LED

Power on/off status light display, red light slides from left to right when power on, red light slides from right to left when power off;

Throttle acceleration status light display, green light fades from dark to bright when accelerating;

Brake status light display, red light fades from dark to bright when braking.

Disc Brake

Hold the right brake handle. The greater the pressure, the greater the braking force.

Thumb Throttle

Bell

Power Button

Short press to turn on, long press to turn off;

Press the button once to turn on the headlight;

Double press the button to shift the gear mode;

Triple press the button to shift the speed unit.

Two startup modes:

1. Non-zero start, power-assisted gliding speed is greater than 2mph, press the dial motor to start working;
2. Brake lever start, the factory default mode is turned off, turn this mode on in the APP, hold the brake lever and release it within 3 seconds, then press the accelerator paddle motor to start working; If the brake lever is released for more than 3 seconds and pressing the accelerator is ineffective, you need to repeat this action and press the accelerator again within 3 seconds to start working;

Gear Setting

Press the power button twice quickly to switch the gear. The gear can be set to Level ECO (max. 10mph), Level D (max. 15mph), Level S (max. 20mph) and the pedestrian mode (max. 3mph).

Brake Control

Hold either brake to lower the speed, the harder you hold the stronger brake force you get.

LED Headlight Switch

After switching on the scooter, click the LED headlight switch to turn it on/off.

Emergency Braking

Under normal circumstances, do not use emergency braking vigorously during high-speed driving, so as to avoid the riding risk or damage to the rear wheel. The company is not responsible for the damage.

Turn Signal Control

Turn signal button function: Click the left button to switch the left turn signal; click the right button to switch the right turn signal; long press the left or right button for 3 seconds to turn on the flash function; click the left or right button to turn off the flash function.

Noise Emission

The A-weighted emission sound pressure level of the vehicle in operation is less than 70 dB(A).

8 Indication Description

If there is anything abnormal about the scooter, the warning indicator will flash, with the flashing value 1-22 displayed.

9 About Charging

Charging Steps:

1. Open the protective cover of the charging port. [Image of charging port]
2. Connect the charger. [Image of connecting charger]
3. After charging, push the protective cover back in. [Image of closing port]

1. Open the charge port cover, insert the charge cable, and insert the power plug into the power socket.

2. Press the power button, battery power will be shown on the LED Display.

3. Turn charging, the scooter cannot be ridden.

Charging capacity: When charging, "%" lights up and real-time display of charging progress.

The adapter is built-in, and when starting to charge, the instrument panel will display the battery level, and the % number on the instrument panel will be highlighted.

10 About the Battery and Charger

Each electric scooter is equipped with a dedicated lithium battery and charger cable. Both the scooter and its accessories have product identification numbers. It is forbidden to use the charger cable of other brands. The charger cable provided by the company must not be used for other purposes. The company is not responsible for the resultant damage to the battery or charger.

Battery: The lithium battery provided by the company can be recharged for at least 800 times, and more than 1,000 times under normal circumstances. Please charge full battery for the first time before using it. The battery can be charged at any time, and there is no any damage to charge it frequently. Meanwhile, please don't forget to charge it per 3 months if you don't use it for a long term.

Operating Temperature: Charging: 0°C~45°C, Discharging: -20°C~60°C.

Built in Charger adapter: The dedicated charger provided by the company has charging protection function for the built-in charger. When the battery is 100% charged, the charger will be powered off automatically. The charging time is about 5-6 hours. Damage to the battery arising from water, collision and other abnormal factors is excluded from the warranty policy.

Production factory: Weihai Hitai Electronics Co., Ltd

MODEL: HT-A89-54625

INPUT: AC100-240V 50/60Hz 2.0A MAX

OUTPUT: 53.6V === 2.5A

Charging instructions:

1. Open the cover and insert the plug into the hole;
2. Insert another plug of the cable into the electric outlet;
3. Please shut down and keep away from water before charging.
4. Only use the specified cable for charging.
5. Warning: Please be careful not to get electric shock.

Kinetic energy recovery: Press the brake in the running process to enable the kinetic energy recovery system and convert part of kinetic energy into electrical energy to be stored and used. The kinetic energy recovery system can enhance the experience of emergency braking. At the same time, the recovered kinetic energy can help increase the endurance. Changes in the power are displayed simultaneously.

11 App Description

We pay great attention to user experience and constantly inject new functions into the App, so the App UI may change with version updating. The following contents are for reference only, please follow the instructions based on the current App version.

1. Please use your mobile phone to scan the QR code to download the App, or search "Invanti", "Invanti Mobility", "5thWheel" or "5thWheelTrip" in the app store to download and install it. If you have installed the App, please ensure it is the latest version. [QR Code Image]
2. Open the App, complete the registration for the first time use. After registering, please login to the homepage, tap "+" on the upper right or Search Devices button in the mid-lower section, then follow prompts to add your scooter. Please keep your Bluetooth and scooter on, and try again if you fail to scan. [Images of Android and iOS app interfaces]

Special note: About the locking function, it can only ensure that the scooter can't run normally. Due to the light weight of the whole scooter and the whole scooter is composed of mechanical parts, it can be removed with corresponding tools. To prevent your electric scooter theft, suggest always park your scooter in a well-lit and highly visible area for you, or invest in a high-quality and sturdy lock that can keep it securely locked up.

12 Maintenance

Lubrication

For maintenance, add a small amount of white grease or lubricant to the folded part once every six months. Check the scooter once every three months for screw loosening. Tighten the loose screw.

Battery

When you get the electric scooter for the first time, please fully charge the battery before using the scooter. The battery can be charged at any time to ensure the power supply. It will not be damaged during charging. When not in use, the battery needs to be charged once every three months.

*Laboratory data

Storage and daily maintenance

Avoid leaving scooter under direct sunlight or in severely humid places for a long time. Keep the scooter clean. Regularly check the tightening of the various bolted elements, in particular the wheel axles, the folding system, the steering system and the brake shaft. WARNING! As with any mechanical component, a vehicle is subject to high stresses and wear. The various materials and components may react differently to wear or fatigue. If the expected service life for a component has been exceeded, it may break suddenly, therefore risking causing injuries to the user. Cracks, scratches and discoloration in the areas subject to high stresses indicate that the component has exceeded its service life and should be replaced.

Cleaning Recommendations

If you see stains on the scooter's body, wipe them off with a damp cloth. If the stains won't scrub off, put on some toothpaste, and brush them with a toothbrush, then wipe them off with a damp cloth.

Do not clean the scooter with alcohol, gasoline, kerosene or other corrosive and volatile chemical solvents to prevent dire damage. Do not wash the scooter with a high-pressure water spray. During cleaning, make sure that the scooter's turned off, the charging cable is unplugged, and the rubber flap is closed as water leakage may result in electric shock or other major problems.

Routine Inspection

1. Before riding, please confirm the folding mechanism is locked;
2. Please check whether the tires are badly worn. Please contact the local authorized dealer if they needs to be replaced;
3. Please check whether the tire pressure is at the standard value. If the tire pressure is too low, please inflate the tires immediately;
4. Please check whether the wear condition of the brake pad affects the use of the brake system. If so, please contact the local authorized dealer to deal with the problem;
5. The screws used in this product are self-tightened screws. Please note that the effect may be gone after several times of tightening.
6. WARNING – Risk of Fire and Electric Shock – No User Serviceable Parts.
7. Prolonged Exposure to UV Rays, Rain and the Elements May Damage the Enclosure Materials, Store Indoors When Not in Use.

Get closer to your seller so he can refer you to an appropriate training organization.

13 Parameter Configuration

Main Parameters

Charger

Wireless Parameters

^[1] Full-battery Endurance: Depending on the environment, angle, speed, driving habits and other factors.

^[2] Maximum Slope: The maximum gradient that driver weighting 165lbs(75kg) gets through at a constant speed of 5mph (8km/h) in the ambient temperature of 77°F(25 °C) in case of a full battery.

14 Authentication

Applicable model: ES15

The product has passed the ANSI/CAN/UL-2272 certification. The battery complies with the UN/DOT 38.3.

According to the Federal Communications Commission (FCC) Compliance Statement as follows: The product complies with part 15 of the FCC rules, and the operation must meet the following two conditions: (1) the product should not cause harmful interference, and (2) the product must accept any received interference, including interference that may lead to accidental operation. Any change or modification not expressly approved by the responsible party may make void the user's right to operate the product.

The EU Compliance Statement is as follows: WEEE needs to properly dispose of and recycle the product. This sign indicates that the product should not be disposed of together with other domestic waste throughout the EU. Therefore, in order to prevent possible harm of uncontrolled waste treatment to the natural environment or human health, it is necessary to recycle it and promote the sustainable reuse of material resources. To recycle the used product, use the return and collection system or contact the retailer who can use the product for environmentally safe recycling.

EU Battery Recycling Information: Batteries or battery compartments are marked in accordance with the European Directive 2006/66/EC and the amendment 2013/56/EU on batteries and accumulator cells and scrap batteries and accumulator cells. The directive applies to the recycling framework of waste batteries and accumulator cells throughout the EU. The label on the battery indicates that the battery should not be discarded, but recycled at the end of its service life according to the directive.

According to the European Directive 2006/66/EC and the amendment 2013/56/EU, batteries and accumulator cells are labeled to indicate that they will be collected separately and recycled at the end of their service life. The label on the battery may also contain the chemical symbols of the relevant metals in the battery (Pb, Hg and Cd). Users should not dispose of batteries and accumulator cells as garbage, but use the collection framework available to customers to recycle and dispose of batteries and accumulator cells. With the engagement of users, it is important to minimize any potential impact of batteries and accumulator cells on the environment and human health due to the presence of potentially hazardous substances.

Before placing electrical and electronic equipment (EEE) into a waste collection stream or waste collection facility, users of equipment containing batteries and/or accumulator cells must remove these batteries and accumulator cells for separate collection.

Restriction of Hazardous Substances in Electrical and Electronic Equipment (RoHS) Directive. The products and parts (cables, wires, etc.) of Invanti (Beijing) Technology Co., Ltd comply with the requirements of directive 2011/65/EU on restricting the use of certain hazardous substances in electrical and electronic equipment ("RoHS recasting" or "RoHS 2")

Trademark and Legal Statements

5TH WHEEL and the 5TH WHEEL logo are trademarks of Invanti (Beijing) Technology Co., Ltd, used under license. Android and Google Play are trademarks of Google Inc. and the App Store is the service mark of Apple Inc. Their respective owners reserve the trademark rights mentioned in this user manual.

The products involved in the registered trademark of 5TH WHEEL are protected by relevant patent laws.

In this user manual, we make our utmost to describe all the instructions and functions of the electric scooter. With constant updates and iteration, the electric scooter received may be slightly different from the product features shown in this manual. For more information, please visit the Apple App Store (iOS) to download the App.

Please note that Invanti has developed products with many functions and different models of products, and some of the functions mentioned here may not be applicable to the product or equipment received. The manufacturer reserves the right to change the design and function of the electric scooter and documents without notice.

© 2025 Invanti (Beijing) Technology Co., Ltd all rights reserved.

Contact Us

If you encounter any problems when using the product, please feel free to contact us through the following methods or scan the QR code to get a quick response and a satisfactory solution.

Amazon Platform: "Contact Seller"

Email Address: aftersales@invanti.com

Use Camera or QR Scanner to Scan [QR Code Image]

Get 24/7 Customer Service

RF exposure warning:

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.