5TH WHEEL Electric Scooter User Manual

Welcome

Thank you for choosing the 5th Wheel Electric Scooter ES09 (hereinafter referred to as ES09). Enjoy the pleasure brought by ES09.

Contents

• 1. Safety Instructions
• 2. Introduction to Functions
• 3. Product Display
• 4. Scooter Assembly
• 5. Unfolding/Folding/Carrying
• 6. Riding and Parking
• 7. Control System
• 8. Indication Description
• 9. About Charging
• 10. About the Battery and Charger
• 11. App Descriptions
• 12. Maintenance
• 13. Common Problems and Solutions
• 14. Parameter Configuration
• 15. Authentication

Please read and know the instructions described in the user manual carefully before using the electric scooter and keep it for future reference.

Please do not dispose of this product casually, it needs to be disposed of in accordance with local recycling regulations.

1 Safety Instructions

Note: Before using this product, please carefully read the following important safety information.

1. This electric scooter can be used by one adult only. Never carry others. [Icon: Person riding scooter with another person behind crossed out]

2. Wear a safety helmet and other protective equipment while using this product. [Icon: Person wearing helmet and protective gear]

3. Do not make dangerous actions or ride with one hand only. Keep your feet on the scooter. [Icon: Person riding scooter with one hand crossed out]

4. Avoid obstacle jumps and anticipate and adapt your trajectory and speed to those of a pedestrian before crossing these obstacles. Meanwhile, get out of the vehicle when these obstacles become dangerous due to their shape, height or slippage. Do not try to directly pass steps that are higher than 3 cm. [Icon: Scooter approaching a step higher than 3cm crossed out]

5. Never ride this product in an unsafe or illegal place. [Icon: Scooter on a road with a red circle and slash]

6. Please practice in an open area (not on lanes) first and use this product until you are skilled in operation. [Icon: Person practicing on a scooter in an open area]

7. For your safety, please control the speed to be less than 25 km/h. Avoid using it at night as much as possible. If you use this product at night, turn on the headlight and control the speed to 15 km/h or less. [Icon: Scooter with speed limit indicator and headlight on]

8. Do not use this product at the ambient temperature below -5 °C. [Icon: Thermometer showing below -5°C crossed out]

9. In the event of bumps or poor road conditions, please use this scooter slowly or get off the scooter and push it forward. [Icon: Scooter on a bumpy road, with a slow down symbol]

10. Do not use this product on an oily or icy surface. [Icon: Scooter on an icy surface crossed out]

11. To avoid damage caused by water to its electrical parts, please do not immerse this product at a depth of more than 4 cm in water. [Icon: Scooter partially submerged in water crossed out]

12. Avoid using this product as much as possible in bad weather such as rain, snow and wind, to prevent unnecessary damage caused by insignificant factors. [Icon: Scooter in rain/snow/wind crossed out]

13. Use this product in accordance with relevant instructions in this manual. Do not use this product beyond the allowable load range. [Icon: Scooter with weight limit indicator (265lbs/120kg)]

14. Avoid using or keeping this product at high or extremely low temperatures, or keeping this product together with flammables. [Icon: Warning symbol for high/low temperature and flammables]

15. The scooter is a special riding product. Please ride it on smooth roads without pits. [Icon: Scooter on a smooth road]

16. Do not attach any load to the handlebar which will affect the stability of the vehicle. [Icon: Handlebar with load attached crossed out]

17. Engage the kickstand when the vehicle is not in use; Flip up the kickstand before use; Do not park the vehicle on the slope. [Icon: Kickstand engaged and disengaged]

18. The minimum height of the user is 1.4m, while the maximum height is no more than 2.2m; the maximum age of the user is 70 years old, while the minimum age is no less than 13 years old. [Icon: Height and age indicators]

19. Braking performance and friction between the tire and road deteriorates in wet conditions, so it is harder to control the speed and easier to lose control. Slow down and brake early when it is raining. [Icon: Scooter in rain with braking warning]

20. WARNING: Keep plastic covering away from children to avoid suffocation. [Icon: Plastic bag with warning symbol]

21. The user shall take the time to learn the basics of the practice to avoid any serious accident that can take place in the first month. [Icon: Person learning to ride a scooter]

22. Notify your presence when approaching a pedestrian or cyclist when you are not seen or heard. Avoid high traffic areas or overcrowded areas. [Icon: Person on scooter signaling to pedestrian]

23. Cross the protected passages while walking. In all cases, take care of yourself and others. [Icon: Person walking scooter across a crosswalk]

24. Do not divert the use of the vehicle. This vehicle is not intended for acrobatic use. [Icon: Scooter performing a stunt crossed out]

25. Caution, the brake may become hot in use. Do not touch after use. [Icon: Hot brake warning]

26. Eliminate any sharp edges caused by use. Do not modify or transform the vehicle, including the steering tube and sleeve, stem, folding mechanism and rear brake. [Icon: Scooter with sharp edges crossed out, and modification warning]

27. The user has the obligation to always wear shoes when riding. [Icon: Person wearing shoes while riding scooter]

28. In any case, anticipate your trajectory and your speed while respecting the code of the road, the code of the sidewalk and the most vulnerable. If any, local special laws and regulations should be observed during riding of this product. [Icon: Scooter on road with traffic signs]

2 Introduction to Functions

1. Product Overview

The 5TH WHEEL Electric Scooter ES09 features:

• Turn Signal [Indicator light on handlebar]
• Rear Disc Brake [Brake mechanism at the rear wheel]
• LED Headlight [Front light]
• Scooter Bar [Main vertical pole]
• Folding Switch [Mechanism to fold the scooter]
• Folding Mechanism [Joint for folding]
• Front Fender [Protection over the front wheel]
• Front Fork [Structure holding the front wheel]
• In-wheel Motor [Motor integrated into the wheel]
• 10 inches Inner Honeycomb Tyres [Tire type]
• LED Display [Screen on the handlebar]
• Folding Buckle [Securing mechanism for folding]
• Rubber Pedal [Footrest area]
• Taillight [Rear light]
• License Plate Frame [Holder for license plate]
• Disc Brake [Brake mechanism on the wheel]
• Kickstand [Support to keep the scooter upright]
• Charging Port [Port for charging the battery]
• Built-in Lithium Battery [Power source]
• 10 inches Inner Honeycomb Tyres [Tire type]

Note: The accessories and any additional items which are not approved by the manufacturer shall not be used.

3 Product Display

Unfolded status

Dimensions: 1215mm (length) x 1130mm (height) x 485mm (width)

Folded status

Dimensions: 460mm (height) x 1130mm (length) x 485mm (width)

Accessories

• User Manual
• Screws (x4)
• Screwdriver
• Tool kit
• Power adapter

Note: Please check out all the items in the package carefully. If anything is missing or damaged, please contact email: aftersales@invanti.com

4 Scooter Assembly

Video Tutorial: A QR code is provided for a video tutorial on product use. It is recommended to scan this QR code to learn more about how to use the product.

Important Notes Before Riding:

• 1. Press the power key to open the scooter.
• 2. For safety, the factory setting of scooter ES09 is non-zero start. You need to slide the scooter to 3km/h (approx. 2mph), and then the throttle can be used normally.
• 3. The scooter can be turned on normally and cannot ride in walking mode, but can only be pushed.
• 4. Cannot start when charging.
• 5. Do not throw away the manual; please refer to the manual for specific operations.

Assembly Steps:

1. Unfold the folding mechanism of ES09 and put down the kickstand. [Diagram: Unfolding the scooter and engaging kickstand]
2. Insert the handlebar into the scooter bar. [Diagram: Inserting handlebar into the main bar]
3. Connect the line connector in the head and riser. [Diagram: Connecting electrical connectors]
4. Use the tools included in the package to tighten the screws. [Diagram: Tightening screws with a tool]
5. After assembly, check whether the power switch can work normally. [Diagram: Checking power switch functionality]

5 Unfolding/Folding/Carrying

1. Unfolding Operations

1. Turn the folding clip clockwise until it is fully open. [Diagram: Unfolding step 1]
2. Pull up the body lever while opening the folding clip. [Diagram: Unfolding step 2]
3. Turn the folder clockwise until it is fully snapped. [Diagram: Unfolding step 3]
4. Check whether the folder key is returned to the bottom. [Diagram: Checking folder key position]

2. Folding Operations

Note: For safety, it is recommended to fold the scooter after it is shut down.

1. Lift the folder key up. [Diagram: Folding step 1]
2. Rotate the folder counterclockwise while lifting the folder key. [Diagram: Folding step 2]
3. Lower the body rod slowly. [Diagram: Folding step 3]
4. Open the folding clip and hang it on the rear fender buckle. [Diagram: Folding step 4]

3. About Carrying

After folding, you can carry the scooter with one or two hands. [Diagram: Person carrying folded scooter]

6 Riding and Parking

Preparation for riding

1. Select an appropriate riding place.
2. Unfold the scooter according to the unfolding instructions and wear protective equipment.
3. It is necessary to check that the steering system is correctly adjusted, that all connection elements (such as a folding system) are correctly tightened and not broken, and that the brakes and wheels are in good condition. [Diagram: Checking scooter components]

Riding

1. Press the power button to turn on the scooter.
2. Put one foot on the footboard and the other foot on the ground.
3. Make the scooter body slide forwards to 2mph and gently press the right thumb accelerator. The scooter will slowly run forwards. When the scooter is running steadily, put the other foot onto the footboard. The larger holding angle of the right thumb accelerator, the higher the speed.

Note: For the riding safety, ES09 has a non-zero start mode. The accelerator cannot be enabled until the body slides forwards for a certain distance.

Stop

Under normal circumstances, if you hold the left brake lever, the motor will be immediately powered off and subject to braking. The greater the holding force, the greater the braking force. [Diagram: Applying brake lever]

7 Control System

Disc brake

Hold the left brake handle. The greater the pressure, the greater the braking force.

Bell

[Bell symbol]

Turn Signal

Turn signal button function: Short press the left/right button to turn the left/right turn signal on/off.

Thumb throttle

[Thumb throttle diagram]

Power Button

Short press to turn on, long press to turn off; Press the button once to turn on the headlight; Double press the button to shift the gear mode; Press the switch key five times continuously to switch the speed unit.

Instrument Display

• Speed Unit
• ECO Mode
• Headlight
• Temperature
• Battery
• Real-Time Speed
• S Mode
• D Mode
• Pedestrian Mode
• Wireless Connection
• Alert

LED Display

[Diagram of LED display showing speed, mode, battery, etc.]

8 Indication Description

Power Switch

Press to start and hold for 3s to shut down.

Gear Setting

Quickly press the power key twice to switch gears. Gears can be set to pedestrian mode (maximum 3mph), ECO mode (maximum 10mph), D mode (maximum 15mph) and S mode (maximum 18mph).

Speed Control

When riding the scooter at a speed faster than 3km/h (1.86 mph), the throttle will get started and take effect. By pressing the throttle, the user can control the riding speed. (Speed Range: 3-29km/h / 2-18mph)

Brake Control

Hold the left brake handle. The greater the pressure, the greater the braking force.

LED Headlight

After the scooter is turned on, the single power switch turns on/off the front lights.

Emergency Braking

Under normal circumstances, do not use emergency braking vigorously during high-speed driving, so as to avoid the riding risk or damage to the rear wheel. The company is not responsible for the damage.

Speed Unit Switching

After opening the vehicle, press the switch key five times continuously to switch the speed unit.

Cruise Mode

Press and hold the throttle at the same speed for 5 seconds to activate cruise control mode. Cruise mode can be turned off by braking or re-pressing the throttle. (The cruise control function is off by default, which can be enabled in the mobile APP)

Turn signal control

Turn signal button function: Short press the left/right button to turn the left/right turn signal on/off.

LED Headlight Status Indication

4 Gears Indication

• Pedestrian Mode: The pedestrian mode is enabled.
• ECO Mode: The ECO mode is enabled.
• D Mode: The D mode is enabled.
• S Mode: The S mode is enabled.

Brief Use Instructions

When the scooter is powered off, press the Power switch briefly to turn it on.

When the scooter is operating, long press the Power switch to turn it off.

When riding a scooter, click the switch key to turn on the front lights, and press it again to turn them off.

During riding the scooter, double press the Power switch to switch gears, with the setting range being switched from pedestrian, ECO, D Mode to S Mode. The scooter will save the gear selected by the last time before shutdown.

9 About Charging

Charging Steps:

1. Remove the rubber protective cover of the charging port. [Diagram: Removing charging port cover]
2. Connect the charger. [Diagram: Connecting charger]
3. After charging, push the rubber protective cover back in. [Diagram: Replacing charging port cover]

1. Remove the rubber protective cover, and insert the charger connector into the charging port of the body.

2. Insert the power plug of the charger into the power socket.

3. When the charger indicator is red, it indicates that the battery is being charged. When the charger indicator turns green, it indicates that the battery has been fully charged.

4. Requirement: Power-off the vehicle during charging, or enter a certain non-operational mode.

Troubleshooting Codes:

If there is anything abnormal about the scooter, the warning indicator will flash, with the flashing value 4-55 displayed.

10 About the Battery and Charger

Each ES09 electric scooter is equipped with a dedicated lithium battery and smart charger. Both the scooter and its accessories have product identification numbers. It is forbidden to use the chargers of other brands. The chargers provided by the company must not be used for other purposes. The company is not responsible for the resultant damage to the battery or charger.

Battery

The lithium battery provided by the company can be recharged for at least 800 times, and more than 1,000 times under normal circumstances. Please charge the full battery for the first time before using it. The battery can be charged at any time, and there is no damage to charge it frequently. Meanwhile, please don't forget to charge it every 3 months if you don't use it for a long term.

Operating Temperatures:

• Charging: 0 °C~45°C
• Discharging: -10 °C~60°C

Charger:

The dedicated charger provided by the company has a function of charging protection. When the battery is 100% charged, the charger will be powered off automatically. The charging time is about 5-6 hours. Damage to the battery arising from water, collision and other abnormal factors is excluded from the warranty policy.

Production factory: ShenZhen HaiLong Tong Technology Co., Ltd

MODEL: HLT-180-4201500

INPUT: AC100-240V 50/60Hz 2.0A MAX

OUTPUT: DC42V 1.5A

Charging instructions:

1. Open the rubber and insert the plug into the hole.
2. Insert another plug of the charger into the electric outlet.
3. When the indicator lamp is red, it shows the battery being charged; When the lamp turns green, the battery is finished charging.
4. Please shut down and keep away from water before charging.
5. Only use the specified charger for charging.
6. Warning: Please be careful not to get electric shock.

Kinetic energy recovery

Press the brake in the running process to enable the kinetic energy recovery system and convert part of kinetic energy into electrical energy to be stored and used. The kinetic energy recovery system can enhance the experience of emergency braking. At the same time, the recovered kinetic energy can help increase the endurance. Changes in the power are displayed simultaneously. [Icon: Lightning bolt symbol for energy recovery]

11 App Descriptions

App Manual Operation

We pay great attention to user experience and constantly inject new functions into the App, so the App UI may change with version updating. The following contents are for reference only, please follow the instructions based on the current App version.

1. Please use your mobile phone to scan the QR code to download the APP, or search "5thWheel" in the app store to download and install it. [QR Code for App Download]
2. Open the App, complete the registration for the first time use. After registering, please login to the homepage, tap "+" on the upper right or "Search Devices" button in the mid-lower section, then follow prompts to add your scooter. [Diagram: App interface showing '+' button and device search]

Note: If you have installed our App, please make sure it is the latest version.

Note: If you fail to scan, please ensure your Bluetooth and scooter are on, and try again.

12 Maintenance

Lubrication

For maintenance, add a small amount of white grease or lubricant to the folded part once every six months. Check the scooter once every three months for screw loosening. Tighten the loose screw.

Battery

When you get the electric scooter for the first time, please fully charge the battery before using the scooter. The battery can be charged at any time to ensure the power supply. It will not be damaged during charging. When not in use, the battery needs to be charged once every three months.

*Laboratory data

Storage and daily maintenance

• Avoid leaving scooter under direct sunlight or in severely humid places for a long time.
• Keep the scooter clean.
• Regularly check the tightening of the various bolted elements, in particular the wheel axles, the folding system, the steering system and the brake shaft.

Cleaning Recommendations

If you see stains on the scooter's body, wipe them off with a damp cloth. If the stains won't scrub off, put on some toothpaste, and brush them with a toothbrush, then wipe them off with a damp cloth.

Do not clean the scooter with alcohol, gasoline, kerosene or other corrosive and volatile chemical solvents to prevent dire damage. Do not wash the scooter with a high-pressure water spray. During cleaning, make sure that the scooter's turned off, the charging cable is unplugged, and the rubber flap is closed as water leakage may result in electric shock or other major problems.

Routine Inspection

1. Before riding, please confirm the folding mechanism is locked.
2. Please check whether the tires are badly worn. Please contact the local authorized dealer if they need to be replaced.
3. Please check whether the tire pressure is at the standard value. If the tire pressure is too low, please inflate the tires immediately.
4. Please check whether the wear condition of the brake pad affects the use of the brake system. If so, please contact the local authorized dealer to deal with the problem.
5. The screws used in this product are self-tightened screws. Please note that the effect may be gone after several times of tightening.

Special note: About the locking function, it can only ensure that the scooter can't run normally. Due to the light weight of the scooter and the whole scooter is composed of mechanical parts, it can be removed with corresponding tools. To prevent your electric scooter theft, suggest always park your scooter in a well-lit and highly visible area for you, or invest in a high-quality and sturdy lock that can keep it securely locked up.

If you encounter any problems during use, contact us at any time or scan the QR code in the following ways, and we will reply to you quickly and provide satisfactory solutions. [QR Code for Contact]

13 Common Problems and Solutions

If there is any problem with the scooter, please try to solve it in the following ways.

1. The display screen is black.
   Possible Causes: The exposure time in the sun is too long.
   Solutions: Please place the scooter in a dark environment for a period of time and it will return to normal.
2. The value is inconsistent with the actual value.
   Possible Causes: The parameter setting is incorrect or missing.
   Solutions: Long press the Power switch to shut down the scooter, and then short press the Power switch to restart it.
3. The digital display is dim.
   Possible Causes: The battery connection is loose, or there is no battery power left.
   Solutions: Turn off the scooter and restart it. If the problem remains, please contact the customer service via: aftersales@invanti.com
4. The product cannot work normally.
   1. Please make sure that it is powered on.
   2. Check whether there is battery power left by viewing the display screen.
   3. Check whether the left brake and rear brake are in place.
   4. Check whether all ports and power cables are connected accurately.
   5. If all the above steps are checked and the product still cannot work normally, please contact us via: aftersales@invanti.com

14 Parameter Configuration

*Maximum endurance: Under full power, 75kg load, ambient temperature 25°C, and driving at a constant speed on flat hardened road at 60% of the maximum speed. The actual endurance varies according to weight, temperature and road conditions.

15 Authentication

Applicable model: ES09

The product has passed the ANSI/CAN /UL-2272 certification of the CSA.

The battery complies with the UN/DOT 38.3.

FCC Compliance Statement

According to the Federal Communications Commission (FCC) Compliance Statement as follows: The product complies with part 15 of the FCC rules, and the operation must meet the following two conditions: (1) the product should not cause harmful interference, and (2) the product must accept any received interference, including interference that may lead to accidental operation. Any change or modification not expressly approved by the responsible party may make void the user's right to operate the product.

EU Compliance Statement

WEEE needs to properly dispose of and recycle the product. This sign indicates that the product should not be disposed of together with other domestic waste throughout the EU. Therefore, in order to prevent possible harm of uncontrolled waste treatment to the natural environment or human health, it is necessary to recycle it and promote the sustainable reuse of material resources. To recycle the used product, use the return and collection system or contact the retailer who can use the product for environmentally safe recycling.

EU Battery Recycling Information

Batteries or battery compartments are marked in accordance with the European Directive 2006/66/EC and the amendment 2013/56/EU on batteries and accumulator cells and scrap batteries and accumulator cells. The directive applies to the recycling framework of waste batteries and accumulator cells throughout the EU. The label on the battery indicates that the battery should not be discarded, but recycled at the end of its service life according to the directive.

According to the European Directive 2006/66/EC and the amendment 2013/56/EU, batteries and accumulator cells are labeled to indicate that they will be collected separately and recycled at the end of their service life. The label on the battery may also contain the chemical symbols of the relevant metals in the battery (Pb, Hg and Cd). Users should not dispose of batteries and accumulator cells as garbage, but use the collection framework available to customers to recycle and dispose of batteries and accumulator cells. With the engagement of users, it is important to minimize any potential impact of batteries and accumulator cells on the environment and human health due to the presence of potentially hazardous substances.

Before placing electrical and electronic equipment (EEE) into a waste collection stream or waste collection facility, users of equipment containing batteries and/or accumulator cells must remove these batteries and accumulator cells for separate collection.

Restriction of Hazardous Substances in Electrical and Electronic Equipment (RoHS) Directive

The products and parts (cables, wires, etc.) of Invanti (Beijing) Technology Co., Ltd comply with the requirements of directive 2011/65/EU on restricting the use of certain hazardous substances in electrical and electronic equipment ("RoHS recasting" or "RoHS 2").

Trademark and Legal Statements

5TH WHEEL and the 5TH WHEEL logo are trademarks of Invanti (Beijing) Technology Co., Ltd, used under license.

Android and Google Play are trademarks of Google Inc. and the App Store is the service mark of Apple Inc. Their respective owners reserve the trademark rights mentioned in this user manual.

The products involved in the registered trademark of 5TH WHEEL are protected by relevant patent laws.

In this user manual, we make our utmost to describe all the instructions and functions of the ES09 electric scooter. With constant updates and iteration, the ES09 electric scooter received may be slightly different from the product features shown in this manual. For more information, please visit the Apple App Store (iOS) to download the App.

Please note that Invanti has developed products with many functions and different models of products, and some of the functions mentioned here may not be applicable to the product or equipment received. The manufacturer reserves the right to change the design and function of the ES09 electric scooter and documents without notice.

©2024 Invanti (Beijing) Technology Co., Ltd all rights reserved.

Contact Us

If you encounter any problems when using the product, please feel free to contact us through the following methods or scan the QR code to get a quick response and a satisfactory solution.

Amazon Platform: "Contact Seller"

Email Address: aftersales@invanti.com

Get 24/7 Customer Service

[QR Code for Contact]

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

RF Exposure Statement

To maintain compliance with FCC'S RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.