ES14 Electric Scooter User Manual

About Charging

To charge the ES14 electric scooter, first remove the rubber protective cover from the charging port. Insert the charger connector into the charging port on the scooter body. Then, plug the charger into a power socket. The charger indicator light will be red while charging and turn green when the battery is fully charged. It is recommended to power off the vehicle during charging or ensure it is in a non-operational mode. After charging, push the rubber protective cover back into place.

About the Battery and Charger

The ES14 electric scooter is equipped with a dedicated lithium battery and a smart charger. Both the scooter and its accessories have product identification numbers. It is forbidden to use chargers from other brands or use the provided chargers for other purposes. The company is not responsible for any damage to the battery or charger resulting from misuse.

Battery

The lithium battery can be recharged for at least 800 times, and over 1,000 times under normal circumstances. For the first use, charge the battery fully. The battery can be charged at any time without damage, even with frequent charging. If the scooter is not used for a long term, charge the battery every 3 months.

Operating Temperature:
Charging: 0°C ~ 45°C
Discharging: -20°C ~ 60°C

Charger

The dedicated charger has a built-in charging protection function. It automatically powers off when the battery reaches 100% charge. The charging time is approximately 5-6 hours. The warranty policy does not cover damage to the battery caused by water, collision, or other abnormal factors.

Charger Specifications:
Production factory: ShenZhen HaiLongTong Technology Co., Ltd
MODEL: HLT-180-5461500
INPUT: AC100-240V 50/60Hz 2.0A MAX
OUTPUT: 54.6V ⎓ 1.5A

Charging Instructions Summary:

1. Open the rubber flap and insert the charger plug into the charging port.
2. Insert the other plug of the charger into the electric outlet.
3. The indicator lamp shows charging status (red for charging, green for fully charged).
4. Shut down the scooter and keep it away from water before charging.
5. Only use the specified charger for charging.
6. Warning: Be careful to avoid electric shock.

Kinetic Energy Recovery

Pressing the brake during operation activates the kinetic energy recovery system. This system converts a portion of kinetic energy into electrical energy for storage and reuse, enhancing the emergency braking experience and increasing endurance. Changes in power are displayed simultaneously.

App Description

The associated mobile application receives regular updates with new functions. The following content is for reference; always follow the instructions in the current app version.

1. Download the app by scanning the QR code or searching for "5thwheel" in your app store. Ensure you have the latest version installed.
2. Open the app, complete the initial registration, and log in. Tap the "+" icon or the "Search Devices" button to add your scooter. Ensure Bluetooth and the scooter are turned on. Retry if scanning fails.

Special Note on Locking Function: The locking function prevents normal operation but does not prevent physical removal of the scooter due to its lightweight and mechanical construction. For theft prevention, park in well-lit, visible areas and use a high-quality lock.

Maintenance

Lubrication

Apply a small amount of white grease or lubricant to the folded part every six months. Check for loose screws every three months and tighten them as needed.

Battery Maintenance

Fully charge the battery before the first use. The battery can be charged anytime without damage. If not in use, recharge the battery once every three months.

Storage and Daily Maintenance

Avoid prolonged exposure to direct sunlight or humid conditions. Keep the scooter clean. Regularly check and tighten all bolted elements, including wheel axles, the folding system, steering system, and brake shaft.

Cleaning Recommendations

Wipe stains with a damp cloth. For stubborn stains, use toothpaste and a toothbrush, then wipe with a damp cloth. Do not use alcohol, gasoline, kerosene, or other volatile solvents. Do not use high-pressure water spray. Ensure the scooter is turned off, the charging cable is unplugged, and the rubber flap is closed during cleaning to prevent electric shock or other issues.

Routine Inspection

1. Before riding, confirm the folding mechanism is locked.
2. Check tire wear; contact an authorized dealer for replacements if needed.
3. Ensure tire pressure is at the standard value; inflate if low.
4. Inspect brake pad wear; contact an authorized dealer if it affects the brake system.
5. Note that screws are self-tightening and may lose effectiveness after multiple tightenings.
6. WARNING: Risk of Fire and Electric Shock. No User Serviceable Parts.
7. Prolonged exposure to UV rays, rain, and elements may damage enclosure materials. Store indoors when not in use.

Parameter Configuration

Authentication

Applicable model: ES14

The product has passed ANSI/CAN/UL-2272 certification by CSA. The battery complies with UN/DOT 38.3.

FCC Compliance Statement:

This product complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it must not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the responsible party may void the user's right to operate the product.

EU Compliance Statement:

WEEE Directive: This product should not be disposed of with household waste. Recycle it through designated return and collection systems or contact the retailer for environmentally safe recycling to prevent harm to the environment and human health.

EU Battery Recycling Information: Batteries are marked according to European Directive 2006/66/EC and amendment 2013/56/EU. They should be collected separately and recycled at the end of their service life. Labels may include chemical symbols (Pb, Hg, Cd). Users must remove batteries for separate collection before disposing of electronic equipment.

Restriction of Hazardous Substances (RoHS) Directive: Products and parts from Invanti (Beijing) Technology Co., Ltd comply with Directive 2011/65/EU.

Trademark and Legal Statements

5TH WHEEL and its logo are trademarks of Invanti (Beijing) Technology Co., Ltd., used under license. Android and Google Play are trademarks of Google Inc. App Store is a service mark of Apple Inc. Product features may differ slightly due to updates. Invanti reserves the right to change design and documentation without notice. © 2023 Invanti (Beijing) Technology Co., Ltd. All rights reserved.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, try to correct it by reorienting the receiving antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a dealer/technician.

Note 2: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.

Contact Us

For any product issues, contact Invanti (Beijing) Technology Co., Ltd. through the following methods:

• Amazon Platform: "Contact Seller"
• Email Address: aftersales@invanti.com

Scan the QR code [QR code symbol] to get a quick response and 24/7 customer service.