Continental Edison CEBL15LB Kettle

Important Safety Instructions

• Please read these instructions carefully before using the water kettle for the first time and keep them for future reference.
• This appliance can be used by children aged 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Keep the appliance and its cord out of reach of children aged less than 8 years.
• Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• If the kettle is overfilled, boiling water may be ejected.
• Kettle is only to be used with the stand provided.
• This appliance is intended for household and similar applications such as: staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels and other residential type environments; bed and breakfast type environments.
• Do not operate the kettle if damaged, after an appliance malfunction, or if it has been damaged in any manner. Return to the customer service department for repair, as special purpose tools may be required.
• Avoid spillage on the connector.
• The heating element surface is subject to residual heat after use.
• Use the kettle according to these instructions; any misuse may cause electric shock or other hazards.
• This appliance is not intended for heating liquids other than water.
• For cleaning surfaces in contact with food, please refer to the <Cleaning> section.
• Before connecting the kettle to the mains supply, ensure that the voltage indicated on the rating plate, located on the bottom of the water kettle, matches your home's mains voltage. If not, contact your dealer and do not use the kettle.
• After the kettle has switched off automatically (or has been switched off manually), it may need time to cool down. After 15-20 seconds, the kettle can be switched on again.
• Always fill the kettle with water before switching it on.
• The kettle is designed to disconnect the live electrical supply from the element under abnormal operating conditions. If the water kettle is accidentally switched on without water, the boil-dry protector will operate.
• The Strix controller protects against overheating and activates the automatic switch-off when the water reaches boiling point or when there is no more water in the kettle.
• If the kettle boils dry, the power indicator will go out. Allow 15 minutes to cool before refilling with cold water. The safety cutout will automatically reset during this time.
• Place the kettle on a stable, flat surface.
• Do not use this appliance outdoors.
• Ensure that the kettle is switched off before removing it from its base.
• Do not remove the kettle from its base during operation.
• Never immerse the kettle or cord in water or any other liquid. Do not allow liquid to penetrate the electrical parts of this kettle.
• Prevent children from pulling on the mains cord or knocking the kettle over.
• Ensure that the mains lead does not overhang the worktop surface.
• The outside surface of the kettle may get hot during use; please take care when using the kettle.
• Never fill water beyond the maximum acceptable water level.
• Never use the kettle with the lid open.
• Do not open the lid when steam is coming out of the spout.
• Before cleaning the kettle, disconnect from the power supply and wait until it has cooled down.
• Always press on the dent of the lid button perpendicularly with your finger while the heat does not dissipate thoroughly.

Before First Use

Before first use, it is recommended to operate the kettle for 2 or 3 times following the instructions below. This will remove any dust or residues remaining from the manufacturing process.

Operating Instruction

The kettle features a lid, a lid button for opening, a handle for carrying, and a base for power connection.

Control buttons and indicators are located on the base:

• ① ON/OFF button: Activates/deactivates the boiling or keep-warm process. The indicator light flashes during temperature adjustment and remains on during heating.
• ☕ Keep warm button: Activates/cancels the keep-warm function. The indicator light flashes during temperature adjustment and while in the keep-warm process.
• ?️ Temperature button: Adjusts the desired temperature in 5°C increments. The indicator light remains on during temperature adjustment.

Note: The boiling setting range is between 40°C and 100°C. The keep-warm setting range is between 40°C and 95°C.

Filling Water

• Take the kettle from the power base before filling.
• To fill the kettle, open the lid by pressing the lid button downwards. Fill the kettle with as much fresh, cold water as desired. The water capacity must be between the Max and Min levels shown inside the kettle.

Boiling Water

• Place the filled kettle with water onto the power base.
• Plug the power base into the mains supply. The kettle enters the stand-by state, and the body shell shows the real temperature of the water.
• To start the boiling process, press the ① button. The appliance enters the heating process. At this time, the desired water temperature can be adjusted by repeatedly pressing the ?️ button. Long pressing the button increases the temperature continuously. The screen will show the chosen degree, and the heating indicator light will flash during adjustment.
• After completing the setting (approximately 5 seconds), a buzzer will sound "di". The heating indicator light will stop flashing and remain on. The body shell will show the real water temperature, and the boiling begins.
• When the adjusted temperature is reached, the kettle will automatically switch off. The buzzer will sound twice, and the heating indicator light will go out. The appliance returns to the stand-by state.
• To cancel the heating process, press the ① button. The kettle will return to the stand-by state, and the heating light will go out.

Note: The kettle will only start to heat if the real water temperature is lower than the adjusted degree. If the real temperature is higher, the kettle will automatically enter the stand-by state.

Keep Warm Feature

There are two approaches to starting the keep-warm function, which keeps the boiled water warm at your desired temperature.

A: To start keep-warm function during the heating process

• While heating, press the ☕ button. The appliance enters the heating and keep-warm process. The desired water temperature to maintain can be adjusted by repeatedly pressing the ?️ button. Long pressing increases the temperature. The body shell will show the chosen degree, and the keep-warm indicator light will flash during adjustment.
• After completing the setting (approximately 5 seconds), the body shell shows the real water temperature, and the heating begins.
• The appliance will automatically switch to the keep-warm function with the keep-warm indicator light flashing. If the keep-warm process has not been interrupted, after 40 minutes, the kettle will go into the stand-by state, and the keep-warm indicator light will go out.
• To cancel the keep-warm function, press the ☕ button again. The kettle will turn back to the boiling process if the real water temperature is lower than the adjusted boiling degree, and the keep-warm indicator will go out. If the temperature is above the adjusted degree, the kettle will automatically enter the stand-by state.
• To cancel the keep-warm process after the water has boiled, press the ① or ☕ button. The kettle will go into the stand-by state, and the keep-warm indicator light will go out.

B: To start keep-warm function in the stand-by state

• In the stand-by state, press the ☕ button. The appliance enters the keep-warm process. Refer to the steps above to set the degree of keeping warm.
• If the real water temperature is lower than the adjusted degree of keeping warm, the kettle will boil water until it reaches the adjusted degree. After that, the kettle will enter the keep-warm process.
• To cancel the keep-warm function, press the ☕ button again. The kettle will return to the stand-by state, and the keep-warm indicator will go out.

Note: When the water temperature decreases below the adjusted degree during the keep-warm process, the kettle will restart to boil until the water reaches the adjusted degree. During this time, the body shell will show the real water temperature, and the keep-warm indicator light will flash. After 40 minutes, the kettle will automatically go into the stand-by state, and the keep-warm indicator light will go out.

Serving Water

• To serve the water, remove the kettle from the power base and pour the water out from the kettle spout.

Cleaning

• First, read the instructions in the section titled "Important Instructions".
• Always disconnect the kettle from the electrical outlet before cleaning.
• Before cleaning, ensure the kettle is cold enough.
• Empty the kettle. Clean the exterior surface of the kettle with a clean, damp cloth to preserve its original highly polished finish. Dry and polish with a soft cloth.
• Do not use abrasive cleansers or scouring agents of any kind inside or on the exterior of the kettle.
• Only use a dry cloth to wipe the base of the kettle.
• Avoid wetting the buttons and other electrical parts.
• Do not immerse the kettle or power base in water or other liquid, and make sure the electrical kettle socket is kept dry.

Descaling

• Half fill the kettle with tap water and add the juice of 1 lemon to the water.
• Boil this mixture and allow it to stand for 15 minutes. Re-boil the mixture and allow it to stand for a further 15 minutes. Re-boil this mixture a third time, then rinse the kettle well.

Storage

• If you do not use the kettle for a long time, please store it carefully.
• Make sure the appliance is unplugged and completely dry.
• Store the appliance in a cool, dry place.
• Make sure the appliance is kept out of the reach of children.

Technical Specification

• Item reference: CEBL15LB
• Model: WK8369CEEK
• Rated voltage: 220-240V 50/60Hz
• Power consumption: 1850-2200W
• Protection class: I

Correct Disposal of this Product

This marking [symbol description: crossed-out bin with recycling arrows, a book, and a cup] indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

Continental Edison
120-126 Quai de Bacalan
CS 11584
33000 Bordeaux
France
marketing@continentaledison.fr

Imported by:
A.M.C.
123, QUAI JULES GUESDE
94400 VITRY SUR SEINE
France