AstroAI 10L Temperature-Controlled Mini Fridge

Safety Information

• Please connect the unit to a 110V power supply. (Different countries have different voltages. Please select the product that matches your actual situation when purchasing.)
• When using 12V vehicle power, do not connect the refrigerator for a long time if the engine is not running.
• Do not connect directly to the 24V cigarette lighter socket of heavy vehicles.
• During a thunderstorm or when the unit will not be used for extended periods, unplug the unit from the power supply to prevent damage to the unit.
• Do not open or remove the cover, as you may be exposed to dangerous voltage or other hazards.
• To reduce the risk of fire or electric shock, avoid overloading wall outlets, extension cords, or other appliances that carry electrical loads.
• Use a suitable power source. Plug the product into a suitable power source according to the instructions in the manual or the marking on the product.
• The supply voltage should match the voltage indicated in the manual and on the unit's nameplate.
• To completely disconnect the unit from the power supply, turn off the power and completely remove the power plug from the outlet.
• Do not bend, stretch, or pull the power cord to avoid electric shock.
• The power outlet must be easily accessible when installing the unit.
• Do not use in areas where dust or other air pollutants can be sucked into the fan.
• Leave a gap of at least 5 cm (approx. 2 inches) from the back and sides of the unit to allow for air circulation and heat dissipation.
• Do not place the refrigerator in poorly ventilated areas, such as the trunk of a car.
• Handle with care, do not squeeze.
• Do not sit on the refrigerator.
• Turn off the refrigerator for 30 minutes before switching from heating mode to cooling mode to allow it to return to room temperature, and vice versa.
• Do not expose the product to rain and keep it away from corrosive gases and liquids.
• If it will not be used for a long time, please disconnect the power supply and store it in a dry and ventilated environment. Avoid direct sunlight.
• Strictly for use by children alone; children should be supervised by adults.

Size Description

Dimensions:

• (1) Width: 25 cm (9.8 in)
• (2) Depth: 32.5 cm (12.8 in)
• (3) Height: 35.2 cm (13.9 in)
• (4) Internal Width: 19 cm (7.5 in)
• (5) Internal Depth: 18 cm (7.1 in)
• (6) Internal Height: 27 cm (10.6 in)

Components:

• (1) Handle
• (2) Door Lock (Note: The diagram shows a handle, not a lock)
• (3) Shelf
• (4) Divider (Note: The diagram shows the interior space, not a physical divider)
• (5) Condensate Tray
• (6) Power Switch (Note: Diagram indicates Power Button)
• (7) Set Button
• (8) Temperature Increase Button (Up Arrow)
• (9) Temperature Decrease Button (Down Arrow)
• (10) Display Screen
• (11) DC Power Cable Socket
• (12) AC Power Cable Socket
• (13) AC Power Cable
• (14) DC Power Cable

Instructions

Auto Operation Steps

• Plug the DC power cable into the DC power socket on the back of the refrigerator.
• Secure the refrigerator and plug the power cable into the car's power outlet.
• Connect the power supply and start the refrigerator. The default temperature is 0°C (32°F).
• Tap the UP button with your finger to increase the preset temperature. Tip: Pressing and holding the button allows the number to change rapidly.
• To decrease the set temperature, tap the DOWN button with your finger.
• Increase the temperature to 20°C (68°F) to switch to heating mode.

WARNING: Operating the portable refrigerator with the vehicle turned off may drain the vehicle's battery.

Home Operation Steps

• Plug the AC power cable into the AC power socket on the back of the refrigerator.
• Secure the refrigerator and plug the power cable into a standard wall outlet.
• Connect the power supply and start the refrigerator. The default temperature is 0°C (32°F).
• Tap the UP button with your finger to increase the preset temperature. Tip: Pressing and holding the button allows the number to change rapidly.
• To decrease the set temperature, tap the DOWN button with your finger.
• Increase the temperature to 20°C (68°F) to switch to heating mode.

Mode Tips

Sleep Mode

• A low-noise, energy-saving mode. The minimum cooling temperature in this mode is higher than the minimum cooling temperature in normal mode, the cooling rate is slower, and the noise is lower.
• Long press the Set button to switch to sleep mode.

Thermal Mode

• The refrigerator is designed to maintain the temperature of items. It is not intended for heating items.
• As long as the door is properly closed, hot items will remain warm for a few hours after the refrigerator is closed.

Temperature Switch

• Simultaneously pressing and holding the UP and DOWN buttons allows switching the temperature display unit between Fahrenheit and Celsius.
• For the fastest cooling rate, please fill the refrigerator with chilled beverages.
• The cooling effect is affected by the ambient temperature. An excessively high ambient temperature may cause the minimum temperature the refrigerator can reach to rise. Note: Ambient temperature refers to the temperature of the surrounding air. For example, if the unit is used for cooling and the ambient temperature around you is 24°C (75°F), the unit will maintain the temperature within your set error of approximately 1.7 to 4.4°C (35 to 40°F).

Care and Maintenance

• Unplug the unit completely before routine maintenance.
• Use a damp cloth and a neutral detergent to clean the housing.
• When not in use, ensure the interior is completely dry before storing.

Parameter Description

Troubleshooting

Unit Not Working

• Check the indicator light (Cold/Heat indicator). If the indicator light is not on or is sometimes on, please check the status of the power connection.
• Check the plug for good contact. Remove dirt from the plug if necessary.
• Ensure the car is turned on (for cars).
• Ensure the working voltage matches the local voltage (for home use) and is only suitable for 12V cigarette lighters (for automobiles).

No Cooling

• Ensure the switch is set to cooling mode.
• Check if the fan is working properly (if not, contact AstroAI for assistance).
• The lowest possible temperature depends on the environment, but should not be below 0°C (32°F). The lower the ambient temperature, the better the cooling effect of the refrigerator.

Condensation

• Do not open the door frequently or open/close it often.
• Do not directly cool high-temperature items.

Poor Heat Dissipation

• Ensure at least 5 cm (approx. 2 inches) clearance from the wall for good heat dissipation.
• Avoid use in high-temperature environments.
• Avoid directly cooling high-temperature items.
• The fan speed in ECO mode is lower. If heat dissipation is poor, please disable ECO mode.

Warranty

Each AstroAI 10L Temperature-Controlled Mini Fridge is free from defects in material and workmanship. This warranty does not cover damage resulting from neglect, misuse, contamination, alteration, accident, or abnormal operating or handling conditions. This warranty applies only to the original purchaser and is non-transferable.

AstroAI is committed to providing customers with excellent products and customer service. To learn more about AstroAI, please visit astroai.com.