Package Contents
Parts are not to scale.
Illustration showing the components of the lamp. Part A is the main fixture base and stem. Part B is a Type-C charging cable. Part C is the lamp shade.
| Part | Description | Quantity |
|---|---|---|
| A | The fixture | 1 |
| B | Type-C cable | 1 |
| C | Metal shade | 1 |
Illustration of the assembled interior table lamp, featuring a domed shade atop a cylindrical base.
Care and Cleaning
EXTERIOR MAINTENANCE
- To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture.
- Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.
Pre-Installation
PLANNING THE INSTALLATION
Read all instructions before assembly and installation. Before starting installation of the fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
TOOLS REQUIRED
Illustration of a knife. [knife icon]
Switch Instruction
- Please use the bottom TYPE C charging port to charge before use. When charging, the indicator is red. When charging is completed, the indicator is green. [charging indicator: red/green]
- Touch the on/off button on the side of the lamp base to adjust the brightness from 100% to 50% and 20% by each touching.
- To adjust the brightness, touch the on/off button on the side of the lamp base. Long press on the on/off button will adjust the brightness from high to low. Release when the desired brightness is reached. To increase the brightness again, you need to long press the on/off button again. Press once to exit the brightness program.
Product Detail Information
- Voltage: DC3.7V
- Switch: Touch ON/OFF
- Colour temperature: 3000K
- Luminaire connected wattage: 1.6W, Luminaire luminous flux: 290lm
- Battery type: 3600mAh 18650 Li-ion battery
- TYPE C charge time: 4~5hrs
- Discharge time: 8~9hrs (50% light intensity)
- Recharge: input DC 5V 1A (exclude adaptor)
- With Touch dim: On-100%-50%-20%-Off, long touch for stepless dimming 20%-100%
- Safety: Class III
- Battery life guarantee: 1 years (with 600 times recharging, it means after 600 times it could not be "100% full filled" but still could be recharged)
Installation
Diagram illustrating the assembly process. It shows the lamp base, stem, and shade being connected, with a Type-C cable plugged into the base. The connection is labeled "DC 5V 1A".
