Nova Life Sylvia Interior Table Lamp

Package Contents

Illustration shows the lamp base, lamp post, and power cord. A table lists the components:

Light Source

Requires one 230V E27 bulb, up to 40W maximum. A LED bulb is recommended.

Care and Cleaning

Exterior Maintenance

To clean the exterior of the fixture, use a dry or slightly dampened clean cloth. Use clean water only; never use a solvent. Wipe the surface gently.

Do not use cleaners containing chemicals, solvents, or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.

Caution

Only use bulbs as directed on the label on the lamp. Turn off the lamp before replacing the bulb and wait until the bulb has cooled. Take special care when touching the lamp when it is lit, as it can be hot.

Pre-Installation

Planning the Installation

Read all instructions before assembly and installation. Before starting installation of the fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.

Tools Required

Knife

Installation

Step 1: Base Assembly

Diagram shows connecting the lamp post to the base.

Step 2: Shade Attachment

Diagram shows placing the lamp shade onto the lamp post.

Step 3: Bulb Installation

Diagram shows screwing a light bulb into the socket.

Step 4: Final Assembly

Diagram shows the fully assembled lamp, ready for use.

Operation

• Turn on power at the circuit breaker or fuse box.
• Turn the light switch on to activate the fixture.