ECOVACS DEEBOT T10 PLUS Instruction Manual

Important Safety Instructions ⚠️

When using an electrical Appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

SAVE THESE INSTRUCTIONS

1. This Appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the Appliance in a safe way and understand the hazards involved. Children shall not play with the Appliance. Cleaning and user maintenance shall not be made by children without supervision.
2. Clear the area to be cleaned. Remove power cords and small objects from the floor that could entangle the Appliance. Tuck rug fringe under the rug base, and lift items such as curtains and tablecloths off the floor.
3. If there is a drop off in the cleaning area due to a step or stairs, you should operate the Appliance to ensure that it can detect the step without falling over the edge. It may become necessary to place a physical barrier at the edge to keep the unit from falling. Make sure the physical barrier is not a trip hazard.
4. Only use as described in this manual. Only use attachments recommended or sold by the manufacturer.
5. Please make sure your power supply source voltage matches the power voltage marked on the Empty Station.
6. For INDOOR household use ONLY. Do not use the Appliance in outdoor, commercial or industrial environments.
7. Use only the original rechargeable battery and Empty Station provided with the Appliance from the manufacturer. Non-rechargeable batteries are prohibited.
8. Do not use without Auto-Empty Dust Bin and/or filters in place.
9. Do not operate the Appliance in an area where there are lit candles or fragile objects.
10. Do not use in extremely hot or cold environments (below -5°C/23°F or above 40°C/104°F).
11. Keep hair, loose clothing, fingers, and all parts of body away from any openings and moving parts.
12. Do not operate the Appliance in a room where an infant or child is sleeping.
13. Do not use Appliance on wet surfaces or surfaces with standing water.
14. Do not allow the Appliance to pick up large objects like stones, large pieces of paper or any item that may clog the Appliance.
15. Do not use Appliance to pick up flammable or combustible materials such as gasoline, printer or copier toner, or use in areas where they may be present.
16. Do not use Appliance to pick up anything that is burning or smoking, such as cigarettes, matches, hot ashes, or anything that could cause a fire.
17. Do not put objects into the suction intake. Do not use if the suction intake is blocked. Keep the intake clear of dust, lint, hair, or anything that may reduce air flow.
18. Take care not to damage the power cord. Do not pull on or carry the Appliance or Empty Station by the power cord, use the power cord as a handle, close a door on the power cord, or pull power cord around sharp edges or corners. Do not run Appliance over the power cord. Keep power cord away from hot surfaces.
19. If the power cord is damaged, it must be replaced by the manufacturer or its service agent in order to avoid a hazard.
20. Do not use the Empty Station if it is damaged. The power supply is not to be repaired and not to be used any longer if it is damaged or defective.
21. Do not use with a damaged power cord or receptacle. Do not use the Appliance or Empty Station if it is not working properly, has been dropped, damaged, left outdoors, or come in contact with water. It must be repaired by the manufacturer or its service agent in order to avoid a hazard.
22. Turn OFF the power switch before cleaning or maintaining the Appliance.
23. The plug must be removed from the receptacle before cleaning or maintaining the Empty Station.
24. Remove the Appliance from the Empty Station, and turn OFF the power switch to the Appliance before removing the battery for disposal of the Appliance.
25. The battery must be removed and discarded according to local laws and regulations before disposal of the Appliance.
26. Please dispose of used batteries according to local laws and regulations.
27. Do not incinerate the Appliance even if it is severely damaged. The batteries can explode in a fire.
28. When not using the Empty Station for a long period of time, please unplug it.
29. The Appliance must be used in accordance with the directions in this Instruction Manual. ECOVACS ROBOTICS cannot be held liable or responsible for any damages or injuries caused by improper use.
30. The robot contains batteries that are only replaceable by skilled persons. To replace the robot's battery, please contact Customer Service.
31. If the robot will not be used for a long time, power OFF the robot for storage and unplug the Empty Station.
32. WARNING: For the purposes of recharging the battery, only use the detachable supply unit CH2117 provided with the Appliance. To satisfy RF exposure requirements, a separation distance of 20 cm or more should be maintained between this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. The antenna used for this transmitter must not be co-located in conjunction with any other antenna or transmitter.

Device Update

Typically, some devices are updated bi-monthly, but not always so specific. Some devices, especially those that went on sale more than three years ago, will only be updated if a critical vulnerability is found and fixed.

Symbols and Disposal

For EU Countries

For EU Declaration of Conformity information, visit https://www.ecovacs.com/global/compliance.

For UK

For UK Declaration of Conformity information, visit https://www.ecovacs.com/global/compliance.

Correct Disposal of this Product ♻️

This marking indicates that this product should not be disposed of with other household waste throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To recycle your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can safely recycle this product.

The remote surveillance is for the absolute private use of non-public, private owned places for the pure self-protection and single control intended only. Please be aware of the local data protection based legal obligations in case of use. No surveillance of public places, especially with clandestine intent and/or on the part of the employer without justified reasons. Such not justified use is in the risk and responsibility of the user only.

Package Contents ?

• Robot
• Dust Container
• Base (Auto-Empty Station)
• Dust Bag (Pre-installed)
• Instruction Manual
• Power Cord
• Dual Side Brushes
• OZMO™ Pro 3.0 Oscillating Mopping System
• Washable Mopping Pad (Pre-installed)
• Disposable Mopping Pads
• Air Freshener (Pre-installed)
• Multi-Function Cleaning Tool

Note: Figures and illustrations are for reference only and may differ from actual product appearance. Product design and specifications are subject to changes without notice.

* Air Freshener Capsule is sold separately that works with Air Freshener. Explore more accessories at https://www.ecovacs.com/global.

Product Diagrams ?

Robot (Top View)

The top view of the robot shows the AUTO Mode Button, Camera Indicator Light, AIVI Camera, and Top Cover.

Robot (Bottom View)

The bottom view reveals the Microphone, RESET Button, Power Switch, Wi-Fi Status Indicator, Carpet Detection Sensor, Floating Main Brush, Universal Wheel, Dual Side Brushes, Driving Wheels, and Anti-drop Sensors.

Auto-Empty Dust Bin Assembly

This assembly includes the High Efficiency Filter, Sponge Filter, Auto-Empty Dust Bin Handle, Filter Net, Release Button, and Dust Disposal Port.

Empty Station

The Empty Station (main unit) includes the Top Cover, Storage Box, Indicator Light, Charging Contacts, and Auto-Empty Inlet. The top of the station shows the Blower Cover, Dust Bag Socket, and Dust Evacuation Tube.

OZMO™ Pro 3.0 Oscillating Mopping System

This mopping attachment features a Reservoir, Water Inlet, and Reservoir Release Button.

Air Freshener (Pre-installed)

This component includes the Air Freshener unit, Capsule Container, and Release Button.

Empty Station (Back View)

The back of the station has a Power Cord Wrap and a Power Cord Port.

Dust Bag

The Dust Bag has a handle for easy removal.

Notes Before Cleaning ?

Tidy up the area to be cleaned by putting furniture, such as chairs, in their proper place.

During the first use, make sure each room door is open to help DEEBOT fully explore your house.

It may be necessary to place a physical barrier at the edge of a drop to stop the unit from falling over the edge.

Make sure areas to be cleaned are well illuminated so AIVI Camera works properly. Remove power cords and small objects from the floor to ensure cleaning efficiency.

Put away objects including cables, cloths and slippers, etc. on the floor to improve the cleaning efficiency.

Clean the AIVI Camera and TrueMapping Distance Sensor with a clean cloth, and avoid using any detergent or cleaning spray.

Before using the product on a rug with tasseled edges, please fold the rug edges under.

Please do not stand in narrow spaces, such as hallways, and make sure not to block the AIVI Camera.

Quick Start ▶️

Initial Setup

Before using DEEBOT, please remove all protective films or protective strips on DEEBOT and Empty Station.

Install the Dual Side Brushes

Make sure the color of Dual Side Brushes are consistent with that of the mounting slot before attaching them.

ECOVACS HOME App

To enjoy all available features, it is recommended to control your DEEBOT via the ECOVACS HOME app. Before you start, ensure your mobile phone is connected to a Wi-Fi network, the 2.4GHz band wireless signal is enabled on your router, and the Wi-Fi indicator light on DEEBOT is slowly flashing.

Download the app from the App Store or Google Play.

Wi-Fi Indicator Light Status

Wi-Fi Connection Requirements

Before Wi-Fi setup, ensure DEEBOT, mobile phone, and Wi-Fi network meet the following requirements:

DEEBOT and Mobile Phone Requirements

• DEEBOT is fully charged and the power switch is turned on.
• Wi-Fi status light slowly flashes.
• Turn off mobile phone's cellular data (you can turn it back on after setup).

Wi-Fi Network Requirements

• You are using a 2.4GHz or 2.4/5 GHz mixed network.
• Your router supports 802.11b/g/n and IPv4 protocol.
• Do not use a VPN (Virtual Private Network) or Proxy Server.
• Do not use a hidden network.
• Use WPA and WPA2 encryption (TKIP, PSK, AES/CCMP).
• WEP EAP (Enterprise Authentication Protocol) is not supported.
• Use Wi-Fi channels 1-11 in North America and channels 1-13 outside North America.
• If using a network extender/repeater, ensure the network name (SSID) and password are the same as your primary network.

After Wi-Fi connection, DEEBOT will enter Networked Standby mode if it has no signal input within 10 minutes.

Please be aware that intelligent functions like remote startup, voice interaction, 2D/3D map display, control settings, and personalized cleaning require the ECOVACS HOME App. You must agree to the Privacy Policy and User Agreement to use these features. Basic functions are available for manual operation even without agreement.

Charging DEEBOT ?

Step 1: Connect the Power Cord

Connect the power cord to the Empty Station and a power outlet.

Step 2: Empty Station Placement and Assembly

Place the Empty Station on a hard, level surface against a wall. Ensure adequate clearance: at least 0.5m (1.64') on both sides and 1.8m (5.9') in front. Keep the area around the Station clear of objects and reflective surfaces. Do not place the Empty Station on carpet.

Step 3: Power ON

Turn the power switch on the robot to 'I' (ON). The 'O' position is OFF. DEEBOT cannot be charged when powered OFF.

Step 4: Charge DEEBOT

Place DEEBOT onto the Empty Station. The robot will begin charging. A full charge takes approximately 6.5 hours. Ensure DEEBOT starts cleaning from the Station and do not move the Station while cleaning. When cleaning is complete, it is recommended to remove the Mopping Pad and manually place DEEBOT into the Station.

Operating DEEBOT ▶️

For the first-time cleaning, ensure DEEBOT is fully charged. During the first cleaning:

1. Please make sure to install the Air Freshener to create a home map, including carpet area, in the ECOVACS HOME App.
2. Please ensure that DEEBOT is fully charged.
3. Please supervise DEEBOT and assist if any issues arise.

Step 1: Start

Install the Air Freshener if not already done. Press the AUTO Mode Button on DEEBOT to start cleaning.

Step 2: Pause/Wake Up

The robot's Control Panel stops glowing after a few minutes of being paused. Tap the AUTO Mode Button on DEEBOT to wake it up.

Step 3: Return to Charge

Tap the ? icon (or equivalent button) for 3 seconds to send DEEBOT back to the Empty Station.

OZMO™ Pro 3.0 Oscillating Mopping System ?

Note:

• Install the OZMO™ Pro 3.0 Oscillating Mopping System for floor scrubbing.
• Before installing, ensure the contacts are thoroughly dry.
• Avoid using this system on carpets.
• It is recommended to drench and wring out the Mopping Pad before installing it for better cleaning.

Step 1: Add Water

Fill the reservoir with purified water or ECOVACS DEEBOT Cleaning Solution. Do not soak the entire system in water.

Step 2: Dry Contacts Thoroughly

Ensure the electrical contacts on the mopping system and the robot are dry before attachment.

Step 3: Install OZMO™ Pro 3.0 Oscillating Mopping System

Align the mopping system with the designated slot on the robot and press until it clicks into place.

Step 4: Start Cleaning

Initiate cleaning after the mopping system is installed.

To prolong the service life, use purified water or ECOVACS DEEBOT Cleaning Solution. Explore more accessories at https://www.ecovacs.com/global.

Air Freshener ?️

Step 1: Install Air Freshener Capsule (sold separately)

Insert the Air Freshener capsule into its designated holder.

Step 2: Install Air Freshener

Attach the Air Freshener unit to the robot until it clicks into place.

Regular Maintenance ?️

To keep DEEBOT running at peak performance, perform maintenance tasks and replace parts with the following frequencies:

Before performing cleaning and maintenance tasks on DEEBOT, turn the robot OFF and unplug the Empty Station.

A multi-function Cleaning Tool is provided for easy maintenance. Handle with care, this cleaning tool has sharp edges.

ECOVACS manufactures various replacement parts and fittings. Please contact Customer Service for more information on replacement parts.

Maintain OZMO™ Pro 3.0 Oscillating Mopping System ?

Step 1: Remove OZMO™ Pro 3.0 Oscillating Mopping System

After DEEBOT finishes mopping, please empty the reservoir.

Step 2: Wipe OZMO™ Pro 3.0 Oscillating Mopping System Clean

Wipe the system with a clean, dry cloth. Do not soak into water.

Step 3: Washable Mopping Pad

Remove the washable mopping pad, clean it, and allow it to dry.

Maintain Auto-Empty Dust Bin and Filters ?

1. Dispose of collected dust into a trash bin.
2. Remove and clean the filters. Rinse the filters with water as shown in diagrams, ensuring they are completely dry before reinstallation. Do not use fingers or brushes to clean the filter.
3. Reassemble the dust bin and filters.

Maintain Floating Main Brush and Dual Side Brushes ⚙️

Floating Main Brush

Periodically check and clean the floating main brush to remove entangled hair and debris. Diagrams show the brush assembly and how to remove/clean it.

Dual Side Brushes

Remove the dual side brushes. Clean them and the mounting area. Reinstall ensuring they click into place.

Filter Rinsing

Diagrams show rinsing filters with water. Note: Please rinse the filter with water as shown. Do not use finger or brush to clean the filter.

Maintain Empty Station ?

Before performing cleaning and maintenance on the Empty Station, unplug it first.

For proper maintenance, wipe with a clean dry cloth, and avoid using any detergent or cleaning spray.

Charging Contacts

Clean the charging contacts on both the robot and the Empty Station regularly to ensure good connection.

Dust Bag Maintenance ?️

Step 1: Dispose the Dust Bag

Lift out the dust bag using its handle to prevent dust leakage and dispose of it in a trash receptacle.

Step 2: Clean the Blower Cover

Clean the blower cover area of the auto-empty station.

Step 3: Install the Dust Bag

Insert a new dust bag into the station.

Step 4: Close the Dust Container Lid

Ensure the dust container lid is securely closed.

Maintain Other Components ?

Wipe the components with a clean, dry cloth. Avoid using cleaning sprays or detergents.

Diagrams illustrate cleaning the robot's sensors, bumper, and other external parts with a cloth.

Empty Station Status Indicator ?

The light effect of the Status Indicator on the Empty Station corresponds to different conditions and solutions. For more support, refer to the ECOVACS HOME App or the Troubleshooting Section of this manual.

Troubleshooting ❓

Technical Specifications ?

Output power of the Wi-Fi module is less than 100mW.

Note: Technical and design specifications may be changed for continuous product improvement. Explore more accessories at https://www.ecovacs.com/global.

Company Information ?

Ecovacs Robotics Co., Ltd.
No.518 Songwei Road, Wusongjiang Industry Park, Guoxiang Street,
Wuzhong District, Suzhou, Jiangsu, China.

Contact: 451-2113-0300