VITTSKÄR
Assembly Instructions
Introduction
This document provides step-by-step instructions for assembling the VITTSKÄR furniture component. Please review all steps before beginning assembly.
Parts and Tools
The following parts and tools are listed for assembly:
- Allen key (130445): 1x ?
- Screws (10101835): 12x ?
- Washers (10092932): 12x ⚪
- Brackets (10127889): 4x [bracket type A]
- Brackets (10127891): 2x [bracket type B]
- Crank tool (100001): 1x ⚙️
Important Notes:
- Ensure correct assembly: ✔️
- Avoid incorrect assembly: ❌
- If unsure, consult instructions or contact IKEA. ?
Step 1
Attach two brackets (10127889) to the main frame. Use two screws (10101835) and two washers (10092932) per bracket. Ensure correct orientation as shown. [correct assembly] ✔️ [incorrect assembly] ❌
Step 2
Attach the four legs to the frame. Use one screw (10101835) and one washer (10092932) for each leg. Ensure legs are securely fastened. [correct assembly] ✔️ [incorrect assembly] ❌
Step 3
Attach one side panel to the frame. Use one screw (10101835) and one washer (10092932). [correct assembly] ✔️ [incorrect assembly] ❌
Step 4
Attach another side panel to the frame. Use one screw (10101835) and one washer (10092932). [correct assembly] ✔️ [incorrect assembly] ❌
Step 5
Attach another side panel to the frame. Use one screw (10101835) and one washer (10092932). [correct assembly] ✔️ [incorrect assembly] ❌
Step 6
Attach the final side panel to the frame. Use two screws (10101835) and two washers (10092932). [correct assembly] ✔️ [incorrect assembly] ❌
Step 7
Attach additional frame support components. Use two screws (10101835) and two washers (10092932). [correct assembly] ✔️ [incorrect assembly] ❌
Step 8
Securely tighten all previously installed screws using the Allen key (130445). The diagram shows tightening 8 screws. [correct assembly] ✔️ [incorrect assembly] ❌
Step 9
Attach the backrest support structure to the frame. The diagram shows securing with 8 screws using the Allen key (130445). [correct assembly] ✔️ [incorrect assembly] ❌
Step 10
Attach two brackets (10127890) to the frame. The diagram shows using screws and washers (quantities implied by visual). [correct assembly] ✔️ [incorrect assembly] ❌
Step 11
Attach two brackets (10127888) using the crank tool (100001). Use two screws (10101835) and two washers (10092932) per bracket. [correct assembly] ✔️ [incorrect assembly] ❌
Step 12
The frame with the backrest structure is now assembled.
Step 13
Attach components to the backrest structure. Use two screws (10101835) and two washers (10092932). [correct assembly] ✔️ [incorrect assembly] ❌
Step 14
Place a mattress or cushion onto the assembled frame. The diagram shows a hand guiding the placement with an arrow indicating direction. ✋
Additional Information
Product: VITTSKÄR
Information: ℹ️
Detailed views of assembly steps 1, 2, and 3 are provided for clarity, showing the use of Allen key (130445) and brackets (10127890).
Copyright © Inter IKEA Systems B.V. 2024.