General Assembly Advice
Before starting, ensure you have the necessary tools: a crosshead screwdriver ? and a flathead screwdriver ?.
Assemble the furniture on a soft surface, such as a rug, to prevent scratches. Avoid forcing parts together. If you encounter difficulties or have questions, please consult IKEA for assistance.
Configuration Overview
This guide covers the assembly of the NÄMMARÖ modular sofa. The assembly process allows for different configurations:
- One-Seat Module: A single base unit combined with one backrest unit.
- Two-Seat Module: A single base unit combined with two backrest units.
[info] icons indicate important notes. Refer to specific pages for detailed steps.
Step 1: Attaching Connecting Brackets to Base Units
Attach connecting brackets (part number 10089542) to the base units. Two brackets are used per connection. The bracket is secured to the corner of the base unit.
Step 2: Attaching Backrests to Base Units
Attach the backrest unit to the base unit. The backrest slides into place and is secured by a mechanism on the base. Ensure the connection is firm.
Step 3: Connecting Seat Modules (Screws)
Connect two seat modules together. This involves joining the base units using screws (part numbers 106655 and 114574). Two screws are used per connection point.
Step 4: Connecting Base Units
Connect two base units together using screws (part numbers 106655 and 114574). Four screws are used per connection point to ensure stability.
Step 5: Connecting Multiple Seat Modules
Connect three or more seat modules together. This is achieved by using connecting brackets (part number 10089543) to join the units. Two brackets are typically used for this connection.
Step 6: Final Securing
Complete the assembly by securing the assembled units. Four screws (part number 114574) are used for this final step to ensure all parts are firmly attached.
