Marantz AV 20 AV Preamplifier Quick Start Guide

Welcome

Thank you for choosing a Marantz AV 20. Use the Setup Assistant function to help configure the settings for this unit when you first set it up. Follow the guidance displayed on the TV screen connected to this unit to configure the settings. This manual describes the procedure up until starting the Setup Assistant.

Please do not return this product to the store. If you need help...

Scan the QR code or visit support.marantz.com for setup help, technical support, warranty assistance, or customer support contact information.

Before You Begin

Required for setup

• TV
• HDMI® cable
• RCA cables or XLR cables
• Power amplifier
• Speakers / Speaker cables

Optional

• LAN cable
• Wi-Fi® router

Note on HDMI Cables:

• When connecting this unit to a device that is compatible with Deep Color, 4K, ARC, and eARC functions, use a “High Speed HDMI cable with Ethernet" that displays the HDMI logo.
• When connecting this unit to a device that is compatible with 8K and 4K 120Hz video, use a certified “Ultra High Speed HDMI cable". If you use a different HDMI cable, the video may not display or other problems may occur.

What's in the Box

• Quick start guide
• Safety instructions
• Notes on radio
• Warranty (for North America model only)
• Cable labels
• AV 20 unit
• Power cord
• FM indoor antenna
• AM loop antenna
• Sound calibration microphone
• Sound calibration microphone stand
• Remote control (RC051SR)
• 2 × R03/AAA batteries
• External antennas for Bluetooth®/wireless connectivity

Note on Microphone Stand: The included sound calibration microphone stand is convenient for performing speaker calibration. Using your own tripod or the supplied sound calibration microphone stand enables settings to be automatically configured to the optimum listening environment, providing exceptionally high performance.

Attach the Included Cable Labels

The supplied cable labels include labels for the speaker and HDMI cables. Attach a cable label to each cable that matches the speakers and HDMI devices being connected. This makes it easy to identify and properly connect the cables between your components.

Setup

1. Connect the Antennas

Procedure:

1. Place the antenna evenly over the antenna terminal located at the upper left or right corner of the rear panel.
2. Turn the antenna clockwise until it is fully connected. Do not over tighten.
3. Rotate the antenna upwards for the best possible reception.

Note: The antennas are required for both Bluetooth and Wi-Fi functions.

Diagram Description: The rear panel of the AV 20 shows antenna terminals and a LAN port. A router is depicted connected to the AV 20's LAN port via an Ethernet cable.

Optional Network Connection

If you are connecting the AV 20 to a wired network, connect an Ethernet cable (not included) between the AV 20 and your router. Do not connect the Ethernet cable if you are connecting the AV 20 to a wireless network.

2. Place the AV 20 and Power Amplifier

Position the AV 20 and your power amplifier near your TV.

Diagram Description: Shows a TV, the AV 20 unit, and a power amplifier unit arranged together.

3. Connect the Power Cord

Connect the power cord to the AV 20 unit and then to a power outlet.

Diagram Description: Shows the power cord being plugged into the AV 20 unit and then into a wall socket.

4. Connect the AV 20 to Your TV

Using a high-quality HDMI cable, connect one end to the HDMI port labeled "eARC" or "ARC" on your TV. Connect the other end to the HDMI OUT TV 1 port on your AV 20.

What is ARC and eARC? Audio Return Channel or "ARC" sends audio back to the AV 20 using the same HDMI cable that sends video from your AV 20 to your TV. This allows your AV 20 to process the sound from your TV's built-in tuner and apps. TVs with an Enhanced Audio Return Channel or "eARC" port provide additional support for high bitrate multichannel audio (Dolby Atmos, Dolby TrueHD, DTS-HD and DTS:X). Please refer to your TV owner's manual for details about eARC support for your particular model.

HDMI Cable Recommendations:

• For 4K TVs, Marantz recommends using an HDMI cable labeled "High Speed" and "with Ethernet".
• For 8K TVs, Marantz recommends using an HDMI cable labeled "Ultra High Speed".

Diagram Description: Shows the rear panel of the AV 20 with an HDMI cable connecting the "HDMI OUT TV 1 (ARC/eARC)" port to the TV's "HDMI IN (ARC/eARC)" port.

5. Turn on the TV

Use your TV remote control to turn on the TV.

Diagram Description: Shows a TV remote control with a finger pressing the power button.

6. Select the Appropriate HDMI Input on Your TV

Use your TV remote control to select the correct HDMI input source (e.g., "INPUT" or "TV/VIDEO").

Diagram Description: Shows a TV remote control with a finger pressing an input selection button.

7. Install Batteries in the AV 20 Remote Control

Open the battery compartment on the remote control and insert 2 × R03/AAA batteries. Batteries can be taken out in reversed order.

Diagram Description: Shows the remote control's battery compartment being opened and batteries being inserted.

8. Turn on the AV 20

Press the power button [⏻] on the remote control to turn on the AV 20.

Diagram Description: Shows the AV 20 unit and a remote control with a finger pressing the power button.

9. Verify the Connection

Verify that you can see the "AV Preamp Setup Assistant" screen on your TV, prompting you to select a language (English, Français, Español).

If this screen is not displayed, please go back and retry the steps again in the recommended sequence.

Note: In case the unit was already set up previously, the Setup Assistant may not start automatically. In such cases, you can access the Setup Assistant by pressing SETUP on the remote control and selecting "Setup Assistant" from the menu.

10. Follow the On-Screen Setup Assistant

The TV is now connected to the AV 20. The Setup Assistant will guide you through connecting and configuring your power amplifier and other components to your Marantz AV 20. Use the remote control and follow the instructions on the TV screen to complete the AV 20 settings.

Once setup is complete, you will see a "Setup Assistant Complete!" message, indicating your AVP is configured for optimal sound and video experience.

Diagram Description: Shows a TV screen displaying a "Setup Assistant Complete!" message with an option to select "Done".

Firmware Update

If you see a firmware update screen after completing the Setup Assistant, select "Update Now" to ensure your new AV 20 is up to date with the latest firmware and features.

Diagram Description: Shows a TV screen with options for firmware update, including "Update Later" and "Update Now".

Download the Mobile Apps

Download both the “HEOS” app and the “Marantz AVR Remote" app for the full home entertainment experience. The HEOS app is required to access online music through your AV 20.

HEOS App: The HEOS app allows you to explore, browse, and play music from many online streaming services or from your own music library.

Marantz AVR Remote App: Control your new AVR with the latest Marantz AVR Remote app.

Links: Available on the App Store and Google Play.

Owner's Manual

Refer to the online manual for other functions, information, and detailed operation procedures.

Online Manual: manuals.marantz.com/AV20/NA/EN/

For more information, visit www.marantz.com.

Trademark Information

Bluetooth®: The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. Use of these marks by DEI Sales, Inc. is under license. Other trademarks and trade names are those of their respective owners.

HDMI: The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress, and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Dolby: Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 2012-2024 Dolby Laboratories. All rights reserved.

DTS: For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, DTS:X, and the DTS:X logo are registered trademarks or trademarks of DTS, Inc. in the United States and other countries. © 2021 DTS, Inc. ALL RIGHTS RESERVED.

App Store: App Store® is registered in the U.S. and other countries.

Google Play: Google Play and the Google Play logo are trademarks of Google LLC.

Wi-Fi CERTIFIED: The Wi-Fi CERTIFIED logo is a registered trademark of the Wi-Fi Alliance. Wi-Fi Certification provides assurance that the device has passed the interoperability test conducted by the Wi-Fi Alliance, a group that certifies interoperability among wireless LAN devices.