Marantz NR1509 AV Surround Receiver

Welcome

Thank you for choosing a Marantz AV receiver. This guide provides step-by-step instructions for setting up your AV receiver.

Before You Begin

Required for Setup

• TV
• Speaker cables
• HDMI cable
• Subwoofer cable
• Speakers

Optional

• LAN cable
• Wi-Fi router

When connecting this unit to a device that is compatible with the Deep Color, 4K and ARC functions, use a "High Speed HDMI cable with Ethernet" that displays the HDMI logo. These drawings are for illustrative purposes only and may not represent the actual product(s).

What's In the Box

• Quick Start Guide
• Safety Instructions
• Notes on radio
• Warranty (for USA / for CANADA)
• Cable labels
• Receiver
• Power cord
• FM indoor antenna
• AM loop antenna
• Sound calibration microphone
• Sound calibration microphone stand
• Remote control unit (RC040SR)
• R03/AAA batteries
• External antennas for Bluetooth / wireless connectivity

The included sound calibration microphone stand is convenient for use when performing Speaker Calibration. Using your own tripod or the supplied Sound calibration microphone stand enables settings to be automatically configured to the optimum listening environment, providing exceptionally high performance.

Important: External Antennas

The removable external antennas are required for both Bluetooth and Wireless network connectivity. Please make sure to connect the antennas before attempting to use the Bluetooth or Wi-Fi features of the NR1509.

Connecting the external antennas for Bluetooth / Wireless connectivity

1. Place the antenna evenly over the antenna terminal located at the upper left or right corner of the rear panel.
2. Turn the antenna clockwise until it is fully connected. Do not over tighten.
3. Rotate the antenna upwards for the best possible reception.

Setup Process

There are four main steps to the setup process:

1. Installing batteries in the remote control unit
2. Connecting the receiver
3. Following the On-Screen Setup Assistant
4. Downloading the Mobile Apps

Step 1: Installing batteries in the remote control unit

Open the battery compartment cover on the remote control. Insert two R03/AAA batteries, observing the correct polarity. Replace the cover.

Step 2: Connecting the receiver

Part 1: Connect the power cord

Place the receiver near your TV. Connect the supplied power cord to the receiver and then to a household power outlet (AC 120 V, 60 Hz).

Part 2: Connect the receiver to your home network

Wired LAN

Connect an Ethernet cable (not included) between your receiver's LAN port and your network router.

Wireless LAN

When connecting to wireless LAN (Wi-Fi), follow the instructions in "Connecting the external antennas for Bluetooth / Wireless connectivity" and connect the antennas.

Step 3: Connect the receiver to your TV with an HDMI cable

Connect the receiver to your TV using an HDMI cable. Connect the HDMI cable from the TV's HDMI OUT (ARC) port to the receiver's HDMI IN (ARC) port.

ARC (Audio Return Channel)

If your TV supports ARC, your TV can send audio back to the AV receiver when you are using your TV's built-in video sources (TV tuner, Smart TV streaming services, etc.). ARC requires that you enable HDMI CEC on your TV. Please refer to your TV's Owner's Manual for instructions on how to set up HDMI CEC. Note that some TV manufacturers use other names for the HDMI CEC function.

Step 4: Turn on the TV

Turn on your TV using its remote control.

Step 5: Select the appropriate HDMI input on your TV

On your TV, select the appropriate HDMI input that the receiver is connected to, using the 'INPUT' or 'TV/VIDEO' button on your TV remote control.

Step 6: Turn on the receiver

Press the power button [power-symbol] on the receiver to turn it on.

Step 7: Verify the connection

Verify that you can see the 'Setup Assistant' screen on your TV, prompting you to select a language (English, Français, Español).

If this screen is not displayed, please go back and retry the steps in the recommended sequence.

Step 3 (Continued): Following the On-Screen Setup Assistant

The Setup Assistant will guide you through connecting and configuring your speakers and components to your Marantz receiver. Use the remote control and follow the on-screen instructions.

Step 4 (Continued): Downloading the Mobile Apps

Download both the "HEOS" App and the "Marantz 2016 AVR Remote" App for the full home entertainment experience. The HEOS App is required to access online music through your AVR.

HEOS App

The HEOS App allows you to explore, browse, and play music from many online streaming services or from your own music library.

Marantz 2016 AVR Remote App

Control your new AVR with the latest Marantz 2016 AVR Remote App. Volume control, sound mode selection, and advanced settings are always only a tap away.

Available on:

• Apple App Store (for HEOS)
• Google Play (for Marantz AVR Remote)
• Amazon Appstore (for Marantz AVR Remote)

Owner's Manual

For more information, visit www.marantz.com.

Refer to the Online Manual for other functions, information, and operation procedure details: manuals.marantz.com/NR1509/NA/EN/.