Hanwha Vision

Important Information

Please check 'Manuals' from our website before connecting to the supply: https://www.hanwhavision.com/en/download-data/

Please check "Product warranty information" from our website: https://www.hanwhavision.com/en/support/warranty/

It is recommended to use the officially compatible VMS version or the latest Hanwha NVR version when integrating with VMS or Hanwha NVR.

The equipment includes LEDs belonging to Risk Group 1, so an RG1 warning label should be attached to the end-product.

Environmental Compliance

[RoHS compliant eco mark] Hanwha Vision cares for the environment at all product manufacturing stages and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Hanwha Vision's devotion to creating environmentally friendly products and indicates that the product satisfies the EU RoHS Directive.

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking on the product, accessories, or literature indicates that the product and its electronic accessories (e.g., charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product or their local government office for details on where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Correct disposal of batteries in this product

(Applicable in the European Union and other European countries with separate battery return systems.)

This marking on the battery, manual, or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd, or Pb indicate that the battery contains mercury, cadmium, or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.

To protect natural resources and promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.

Safety Information

Mounting and Environmental Precautions

[Warning symbol] Ensure proper mounting to avoid structural issues.

The device is not designed for use in extreme temperatures (fire or freezing conditions) or environments with high humidity.

Keep the device away from flammable liquids or substances.

Components

Note: Accessories may vary by sales country.

• Camera Unit
• Mounting Bracket
• Cable Gland / Connector Housing
• Network Cable (IP66 rated)
• Power Cable
• Mounting Plate
• Screws and Anchors
• Tools: TR 30, TR 20, TR 10

Installation Guide

1. Step 1: Prepare Mounting

   Attach the mounting bracket to the camera unit using two TR20 screws.

2. Step 2: Insert Micro SD Card

   Insert a Micro SD card (not included) into the designated slot.

3. Step 3: Connect Mounting Arm

   Connect the mounting arm to the ceiling or mounting surface.

4. Step 4: Secure Camera Base

   Attach the camera base to the mounting arm.

5. Step 5: Install Network Cable

   Prepare and install the IP66 rated network cable through the cable gland.

6. Step 6: Route Cable

   Route the network cable, ensuring approximately 9-10 cm of slack is maintained.

7. Step 7: Connect Network Cable

   Connect the network cable to the camera's port.

8. Step 8: Secure Cable Connector

   Secure the network cable connector.

9. Step 9: Attach Camera Body

   Connect the camera body to the mounting assembly.

10. Step 10: Finalize Cable Connection

    Ensure all cable connections are properly secured.

11. Step 11: Adjust Camera Angle

    Adjust the camera's tilt angle by pushing upwards on the designated points.

12. Step 12: Rotate Camera

    Rotate the camera body to the desired position.

13. Step 13: Secure Camera Housing

    Secure the camera housing using three TR30 screws.

14. Step 14: Attach Trim Ring

    Attach the trim ring to the camera base using four TR10 screws. [Warning symbol] Avoid using power tools that may damage the unit.

15. Step 15: Final Assembly

    The camera is now fully assembled.

16. Step 16: Setup and Configuration

    Connect the camera to your network. Use the 'DEVICE MANAGER' software and the 'User Manual' (refer to page 13 for password settings) for initial setup and configuration. [Checkered flag] Installation complete.

Password Setting and Login

Password Setting

When you access the product for the first time, you must register the login password.

Administrator Password Change

New password

Confirm new password

Password Requirements:

• If the password is 8 to 9 characters long, it must include at least 3 of the following character types: English uppercase letters, English lowercase letters, numbers, and special characters. (Support up to 64 characters)
• If the password is 10 characters or longer, it must include at least 2 of the following character types: English uppercase letters, English lowercase letters, numbers, and special characters.
• User ID may not be used as password. The password and User ID cannot be identical.
• Allowed special characters: ~`!@#$%^&*()_-+={}[]|\;:"<>.,?/
• Consecutive characters (e.g., 1234, abcd) are limited to a maximum of 4.
• Repeating the same character 4 or more times consecutively (e.g., !!!!, 1111, aaaa) is not allowed.

Additional Notes:

• For a new password with 8 to 9 characters, use at least 3 types: uppercase/lowercase letters, numbers, and special characters.
• For a password with 10 characters or longer, use at least 2 types. (Support up to 64 characters)
• Special characters allowed: ~`!@#$%^&*()_-+={}[]|\;:"<>.,?/
• Space is not allowed for password.
• For higher security, repeating the same characters or consecutive keyboard inputs for passwords is not recommended.
• If you lose your password, you can press the [RESET] button to initialize the product. It is advised to record your password.

Login

Whenever you access the camera, the login window appears. Enter the User ID and password to access the camera.

1. Enter “admin” in the <User Name> input box.
2. Enter the password in the <Password> input field.
3. Click [Sign in].

Certification and Distributor Information

EAC Certification

The EAC mark indicates compliance with Eurasian Economic Union technical regulations. Text reads: "Subject to use for its intended purpose under normal conditions. Service life: 7 years."

Turkish Distributors

The following companies are authorized distributors in Turkey:

The average lifespan recommended by the Ministry of Trade is stated, along with a declaration of compliance with EEE regulations.