Find My Device Manual

This manual provides instructions for using your Find My device.

Quick Instructions

Turn on the device: Press and hold the button for 5 seconds. The device will beep and turn on.
Pair the device:
- Open the Find My app.
- Hold the device close to your iPhone, tap the Items tab, tap +, and then Add Other Item.
- Tap Connect.
- Type a name for your device and select an emoji.
- Tap Agree to acknowledge that this item will be linked to your Apple ID.
- Tap Finish.
Enable Lost Mode:
- Open the Find My app, tap the Items tab, then tap your item.
- Under Lost Mode, tap Enable.
- Read the instructions, tap Continue, and enter a phone number or email address.
- Confirm the information, customize the lost message, and tap Activate to complete the setup.
Remove the device:
- Open the Find My app, tap the Items tab, then tap your item.
- Tap Remove Item and then tap Remove to complete the operation.

Note: After removing the device from the app, it will beep and the light will flash six times. It will remain in pairing mode for 10 minutes. If not re-paired within this time, it will exit pairing mode. To re-pair, click the device button once; it will beep and the light will flash once, entering pairing state.

Main Functions

Locate your item: If your item is not nearby, the Find My app uses the Find My network (hundreds of millions of Apple devices worldwide) to help track it. Nearby devices securely send the location to iCloud anonymously and encrypted.
Play Sound: Open the Find My app, tap the Items tab, then tap your item. Click Play Sound; the device will beep to help you find it easily.

Instructions for Device Button

Power on: Long press the button for five seconds. The device will beep, the light will flash three times, and it will turn on.
Device status confirmation: Double-click the device button. The device will beep, and the light will flash three times, indicating it is working. If it does not ring, it is off.
Enter pairing state again: After removing the item from the Find My app, the device will beep and flash six times. If not re-paired within 10 minutes, click the button once to enter pairing state (beep and flash once).
Factory Reset: Remove the item from the Find My app. With the device powered on, double-click the button. The device will beep. Long press the button for eight seconds until it beeps and flashes three times. Release the button to complete the reset. The device can now be paired.
Power off: When the device is on, press the button 5 times in 2 seconds. The device will beep, flash three times, and power off.

FAQ

When can the device be located? When an item is separated from its owner for a period, it can be found by other Apple devices in the Find My network.
How to confirm if the device is turned on? Double-click the device button. If it beeps and flashes three times, it's working. If not, it's off.
How is the device designed to discourage unwanted tracking? If a Find My network accessory separated from its owner is detected moving with you over time, you will be notified via your Apple device (iOS 14.5 or later) or the accessory will emit a sound if moved.
How is privacy protected? Only you can see your item's location. Location data is not stored on the item, and relaying devices remain anonymous and encrypted.
Battery Specifications: Replaceable battery capacity: 3.7V-130mAh.
Wireless charging instructions:
- Align the wireless charging location sign on the device with the center of the wireless charger.
- The LED light will turn on, and the device will beep once when charging.
- A full charge takes approximately 45 minutes from no battery.
What is the Find My network? It's a secure network using the Find My app to locate compatible personal items on a map. It's encrypted and anonymous, protecting user privacy.

European Union - Disposal Information

The symbol indicates that this product and/or its battery should be disposed of separately from household waste according to local laws and regulations. Take it to a designated collection point at the end of its life to conserve resources and protect the environment.

Regulatory Safety Information

WARNING: KEEP BATTERIES OUT OF REACH OF CHILDREN. Swallowing can lead to serious injury or death due to chemical burns and potential perforation of the esophagus. If a button battery is swallowed, call the 24-hour Poison Information Centre immediately.

Legal Notice

The Apple Find My device allows location tracking via the Find My app. Use of the latest iOS, iPadOS, or macOS is recommended. The Works with Apple badge signifies compliance with Apple Find My network specifications. Apple is not responsible for the operation or compliance of this device. Trademarks mentioned belong to Apple Inc. and Cisco.

Introduction to Button Operation

Turn on: Press and hold the button for five seconds.
Turn off: Press the button 5 times in 2 seconds.
Device status confirmation: Double-click the button.
Factory Reset: Double-click the button, then press and hold for 8 seconds.

Refer to the manual for detailed operations.

FCC Statement

This equipment complies with Part 15 of the FCC Rules for Class B digital devices. It is designed to provide reasonable protection against harmful interference in residential installations. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the manufacturer may void the user's authority to operate the equipment.

RF Exposure Information: The device meets general RF exposure requirements and can be used in portable exposure conditions without restriction.

	Apple Find My Anti-Lost Device Specifications and Features Detailed specifications for the Apple Find My anti-lost device, including features, technical details, and application scenarios. Officially authorized by Apple and integrated with the Find My network.
	Find My Network Accessory Specification - Developer Preview This document provides the technical specification for accessories that integrate with Apple's Find My network. It details the core concepts, requirements, features, and protocols necessary for developers to create Find My network-enabled accessories.
	AppleCare+ with Theft and Loss: Comprehensive Device Protection Understand the benefits, coverage limits, service fees, and deductibles for AppleCare+ with Theft and Loss, an optional device protection program for iPhone, iPad, and Apple Watch. Learn about accidental damage, hardware repair, battery replacement, and theft or loss coverage.
	AirPods 4 with Active Noise Cancellation - Product Information Discover the new AirPods 4 with Active Noise Cancellation, featuring Adaptive Audio, Ambient mode, and the powerful H2 chip for enhanced call quality and Siri interaction. Enjoy immersive spatial audio and up to 30 hours of listening time with USB-C charging. Includes charging case with speaker and Find My functionality.
	Apple Find My Network Compatibility and Specifications Details on how products integrate with the Apple Find My network, including system requirements, certifications, and trademark information.
	Apple AirPods Pro (2nd generation) with USB-C - Technical Specifications Detailed technical specifications for Apple AirPods Pro (2nd generation) with USB-C, including features like Active Noise Cancellation, Transparency mode, Spatial Audio, battery life, connectivity, and system requirements.
	Apple Find My Bicycle Bell User Manual User manual for the Apple Find My bicycle bell (model MO2601), detailing setup, features, specifications, and safety information for locating personal items.
	AppleCare+ with Theft and Loss: Comprehensive Device Protection Understand the benefits, coverage, service fees, and deductibles for AppleCare+ with Theft and Loss, an optional device protection program for Apple Watch, iPad, and iPhone. Learn about accidental damage, theft, and loss coverage, including claim procedures and exclusions.