Apple Find My Bicycle Bell User Manual

Introduction

The Apple Find My network provides an easy, secure way to locate compatible personal items using the Find My app on your iPhone, iPad, Mac, or the Find Items app on Apple Watch.

To use the Apple Find My app to locate this item, the latest version of iOS, iPadOS, or macOS is recommended. The Find Items app on Apple Watch requires the latest version of watchOS.

Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards.

Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, Mac, macOS and watchOS are trademarks of Apple Inc. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

Getting Started

1. Power on/off

Power On: Hold the circular dot on the device's power button for 3 seconds, and when you hear a ring-ring chime, it indicates that the device has been powered on.

Power Off: Press the device button twice, and you will hear a confirmation sound. Then, press and hold the power button for 3 seconds and then release it. You will hear two beeps ?? indicating it is powered off.

If the product is not linked with your Apple ID, it will be closed within 10 minutes automatically.

Device Diagram:

The device features a power button (labeled 1) and a speaker grille (labeled 2).

Adding Your Locator

2.1. Start the App

• Open the Find My app on your supported iPhone or iPad.
• Allow notifications from the app.

2.2. Connect your Locator

• Power on your Locator.
• Select the "Items" tab and then tap the "Add Item" tab. Tap "Other Supported Items".
• Make sure your Item Locator is close to your phone. Wait until you see the pop-up "Wireless tag" then tap "Connect".
• Choose a recognizable name and emoji for your item Locator and tap "Continue".
• Find My will ask for confirmation to add your Locator for your Apple ID - tap "Continue".
• Tap "Finish" and your Locator will be set up and ready to be connected to whatever item you wish to locate, e.g., your keys.

Functions

3.1. Locate Your Item

When your item is nearby, tap "Play Sound" ▶️ to make your Locator beep, then you can find it. When it is out of range, you can find the Locator's Last Known Location.

3.2. Notifications

You will receive a notification when you leave your Locator behind when it's no longer in range of your device.

Note: "Notify When Found" can only be activated when your Locator is out of range.

3.3. Share items

The people you've shared it with will be able to locate it, and they won't receive unidentified-tracking notifications.

To use Share Items, make sure you and your friends have installed the iOS 17, iPadOS 17, or macOS 14 Sonoma public betas or newer.

3.4. Lost mode

When your item is lost, enable lost mode. You will receive a notification when location becomes available. You can leave a phone number or email address for the finder of your item to contact you.

Note: When "Lost Mode" is enabled, your Locator is locked and no one else can pair with it. And DO NOT REMOVE ITEM in the APP. Your Item Locator will be locked and cannot be used by any person.

3.5. Remove item

Make sure your item is nearby. You can remove the item in the app. It should make a ring-ring chime indicating it is removed successfully, then the item can be used by other people.

3.6. Factory Reset Your Locator

When your item is out of the range of your phone, and your Locator is removed from Find My app but the device can't be used by other people, you need to reset your locator. Then it can be used by other people.

How to restore factory settings: Press the function button two times, you can hear one beep. Then press the function button four times rapidly and then hold it a fifth time until you hear a ring-ring chime. Now the device is reset. The device can be repaired to a new Apple ID account as a new device.

3.7. Unwanted Tracking Detection

If any Find My network accessory separated from its owner is seen moving with you over time, you'll be notified in one of two ways:

• If you have an iPhone, iPad, Find My will send a notification to your Apple device. This feature is available on iOS or iPadOS 14.5 or later.
• If you don't have an iOS device or smartphone, a Find My network accessory that isn't with its owner for a period of time will emit a sound when it's moved.

These features were created specifically to discourage people from trying to track you without your knowledge.

Specifications

• Battery: 1 x CR2032 (3V, Replaceable)
• Wireless range: 10-30 meters
• Wireless version: 5.2

Installation of Battery

Diagram Description:

The diagrams show the battery, the battery compartment, and how to open it.

• Insert the opening tool ? into the slot.
• Rotate the opening tool 90 degrees to open the case.
• Place the battery with the positive pole (+) upwards.
• Close the case.
• Put a lanyard around the holder, if necessary.

Installation on Bicycle

Diagram Description:

The diagrams show the bicycle bell components and how to insert the Find My device and attach it to a bicycle.

• Turn the black cover of the bicycle bell anti-clockwise to open.
• Insert the Find My device into the bicycle bell.
• Turn the black cover clockwise to close.
• Screw the bell onto the bicycle.

Privacy and Security

Your Locator sends out a secure wireless signal that can be detected by nearby devices in the Find My network. These devices send the location of your Locator to iCloud – then you can go to the Find My app and see it on a map. The whole process is anonymous and encrypted to protect your privacy.

WARNING

• Do not ingest battery, Chemical Burn Hazard.
• Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate.
• Even used batteries may cause severe injury or death.
• Call a local poison control center for treatment information.
• Non-rechargeable batteries are not to be recharged.
• Do not force discharge, recharge, disassemble, heat above 50°C/122°F or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns.