UNITY LASERS ELITE 10 Series Laser Unity User Manual

Manufactured/Certified by: Unity Lasers s.r.o. and Unity
Lasers, LLC
Compliance: IEC 60825-1:2014, US FDA CDHR laser safety
standards 21 CFR 1040.10 & 1040.11

Product Usage Instructions

Introduction

Thank you for purchasing the ELITE PRO FB4 laser system. To
ensure optimal performance and safe operation, please carefully
read and follow the instructions provided in this manual.

What is Included

The package includes:

ELITE PRO FB4 10/20/30/60 laser with Integrated FB4 DMX and
IP65 housing
Protective case, Estop safety box, Estop cable (10M / 30FT),
Ethernet cable (10M / 30FT)

Power cable (1.5M / 4.5FT), Interlock, Keys, Outdoor RJ45
connectors
Manual, Quickstart guide, Variance card, Notes

Unpacking Instructions

Follow the unpacking instructions provided in the manual to
safely unpack the contents of the package.

Safety Notes

It is essential to follow all safety guidelines provided in the
manual. This Class 4 laser product should not be used for
audience-scanning applications. Ensure the output beam is always at
least 3 meters above the floor in the audience area.

Laser Compliance Statement

The product complies with IEC 60825-1:2014 and US FDA CDHR laser
safety standards 21 CFR 1040.10 & 1040.11. It is important to
adhere to these standards for safe operation.

Product Safety Labels

Familiarize yourself with the location of product safety labels
on the device for quick reference during usage.

Instructions for Using E-Stop System

Refer to the manual for detailed instructions on how to
effectively use the E-Stop system for emergency shutdown
procedures.

Theory of Operation

Understand the theory of operation provided in the manual to
gain insights into how the system functions.

Proper Usage

Follow the guidelines on proper usage to ensure efficient and
safe operation of the ELITE PRO FB4 laser system.

Rigging

Proper rigging is crucial for mounting and positioning the laser
system securely. Follow the rigging instructions carefully.

Operation

Learn how to operate the ELITE PRO FB4 laser system effectively
by following the operational instructions provided in the
manual.

Safety Tests

Perform safety tests as outlined in the manual to verify that
the system functions correctly and safely.

Model Specification

Refer to the model specifications section to understand the
detailed specifications of each model variant included in this
product line.

Service

For any service-related queries or maintenance requirements,
refer to the service section for guidance.

FAQ

Q: Can the ELITE PRO FB4 laser system be used for
audience-scanning applications?

A: No, this projector is a Class 4 laser product and should
never be used for audience-scanning applications. The output beam
must be at least 3 meters above the floor in the audience area.

View Fullscreen

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

USER MANUAL

ELITE 10 PRO FB4 (IP65) ELITE 20 PRO FB4 (IP65) ELITE 30 PRO FB4 (IP65) ELITE 60 PRO FB4 (IP65) ELITE 100 PRO FB4 (IP65)

Notice AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED LIGHT
CLASS 4 LASER PRODUCT

Manufactured / Certified by Unity Lasers s.r.o. Odboraska, 23 831 02 Bratislava Slovakia, Europe UNITY Laser LLC
1265 Upsala Road, Suite 1165, Sanford, FL 32771

Classified per IEC 60825-1: 2014 Complies with US FDA CDHR laser safety
standards 21 CFR 1040.10 & 1040.11 and Laser notice

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

CONTENTS

INTRODUCTION

WHAT IS INCLUDED

UNPACKING INSTRUCTIONS

GENERAL INFORMATION

SAFETY NOTES

LASER AND SAFETY NOTES

LASER EMISSION DATA

LASER COMPLIANCE STATEMENT

PRODUCT SAFETY LABEL LOCATION

PRODUCT SAFETY LABELS

INTERLOCK CONNECTION DIAGRAM

INSTRUCTIONS FOR USING E-STOP SYSTEM

THEORY OF OPERATION

PROPER USAGE

RIGGING

OPERATION

· CONNECTING THE LASER SYSTEM

· TURNING OFF THE LASER SYSTEM

SAFETY TESTS

· E-STOP FUNCTION

· INTERLOCK RESET FUNCTION (POWER)

· KEY SWITCH FUNCTION

· INTERLOCK RESET FUNCTION (REMOTE INTERLOCK BYPASS)

MODEL SPECIFICATION

· PRODUCT SPECIFICATION (ELITE 10 PRO FB4 (IP65))

· FRONT & REAR PANEL VIEW (ELITE 10 PRO FB4 (IP65))

· DIMENSION DETAILS (ELITE 10 PRO FB4 (IP65))

· PRODUCT SPECIFICATION (ELITE 20 PRO FB4 (IP65))

· FRONT & REAR PANEL VIEW (ELITE 20 PRO FB4 (IP65))

· DIMENSION DETAILS (ELITE 20 PRO FB4 (IP65))

· PRODUCT SPECIFICATION (ELITE 30 PRO FB4 (IP65))

· FRONT & REAR PANEL VIEW (ELITE 30 PRO FB4 (IP65))

· DIMENSION DETAILS (ELITE 30 PRO FB4 (IP65))

· PRODUCT SPECIFICATION (ELITE 60 PRO FB4 (IP65))

· FRONT & REAR PANEL VIEW (ELITE 60 PRO FB4 (IP65))

· DIMENSION DETAILS (ELITE 60 PRO FB4 (IP65))

· PRODUCT SPECIFICATION (ELITE 100 PRO FB4 (IP65))

· FRONT & REAR PANEL VIEW (ELITE 100 PRO FB4 (IP65))

· DIMENSION DETAILS (ELITE 100 PRO FB4 (IP65))

TECHNICAL INFORMATION MAINTENANCE

SERVICE

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

INTRODUCTION
Thank you for purchasing this purchase. To optimize the performance of your laser, please read these operating instructions carefully and familiarize yourself with the basic operations of this system. These instructions contain important safety information regarding the use and maintenance of this system as well. Please keep this manual with the unit, for future reference. If you sell this product to another user, be sure that they also receive this document.

NOTICE
· We are constantly striving to improve the quality of our products. As such, the content of this manual may be changed without notice.
· We have tried our best to guarantee the accuracy of this manual. If you have any questions or find any errors, please contact us directly to help address this.

WHAT IS INCLUDED

Name

Pcs.

ELITE PRO FB4 10/20/30 laser

w/ Integrated FB4 DMX

IP65 housing

Protective case

Estop safety box

Estop cable (10M / 30FT)

Ethernet cable (10M / 30FT)

Power cable (1.5M / 4.5FT)

Interlock

Keys

Outdoor RJ45 connectors

Manual

Quickstart guide

Variance card

Notes

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

WHAT IS INCLUDED [CONTINUED]

Name

Pcs.

ELITE PRO FB4 60/100 laser w/ Integrated FB4 DMX

IP65 housing

Heavy duty flight case

Estop safety box

Estop cable (10M / 30FT)

Ethernet cable (10M / 30FT)

Power cable (1.5M / 4.5FT)

Interlock

Keys

Outdoor RJ45 connectors

Manual

Quickstart guide

Variance card

Notes

UNPACKING INSTRUCTIONS
· Open the package and carefully unpack everything inside. · Ensure all parts are present and in good condition. · Do not use any equipment that appears to be damaged. · If any parts are missing or damaged then please immediately notify your carrier or local distributor.
GENERAL INFORMATION
The following chapters explain important information about lasers in general, basic laser safety and some tips about how to use this device correctly. Please read this information as it contains critical information you must be aware of, prior to using this system.

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

SAFETY NOTES
WARNING! This projector is Class 4 laser product. It must never be used for audience-scanning applications. The output beam of the projector must always be at least 3 metres above the floor in the audience. See the Operating Instructions section for further information.
Please read the following notes carefully! They include important safety information about the installation, usage, and maintenance of this product.
· Keep this user manual for future consultation. If you sell this product to another user, be sure that they also receive this document.
· Always make sure that the voltage of the outlet to which you are connecting this product is within the range stated on the decal or rear panel of the product.
· This product is not designed for use outdoors in adverse weather conditions. To prevent risk of fire or shock, do not expose this product to rain or moisture.
· Always disconnect this product from the power source before cleaning it or replacing the fuse. · Make sure to replace the fuse with another of the same type and rating. · If mounting is overhead, always secure this product to a fastening device using a safety chain or a cable. · In the event of a serious operating problem, stop using the projector immediately. Never try to repair the
unit except in a controlled environment under trained supervision. Repairs carried out by unskilled people can lead to damage or malfunction of the unit, as well as exposure to dangerous laser light. · Never connect this product to a dimmer pack. · Make sure the power cord is not crimped or damaged. · Never disconnect the power cord by pulling or tugging on the cord. · Never carry a product from the power cord or any moving part. Always use the hanging/mounting bracket or the handles. · Always avoid eye or skin exposure to direct or scattered light from this product. · Lasers can be hazardous and have unique safety considerations. Permanent eye injury and blindness is possible of lasers are used incorrectly. Pay close attention to each safety REMARK and WARNING statement in this user manual. Read all instructions carefully BEFORE operating this device. · Never intentionally expose yourself or others to direct laser light. · This laser product can potentially cause instant eye injury or blindness if laser light directly strikes the eyes. · It is illegal and dangerous to shine this laser into audience areas, where the audience or the other personnel could get direct laser beams or bright reflections into their eyes. · It is a US Federal offense to shine any laser at aircraft. · No service allowed by customer. There are no user serviceable parts inside the unit. Do not attempt any repairs yourself. · Service is only to be handled by the factory or authorized factory trained technicians. Product is not to be modified by the customer. · Caution use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

LASER AND SAFETY NOTES
STOP AND READ ALL THE LASER SAFETY NOTES BELOW
Laser Light is different from any other light sources with which you may be familiar. The light from this product can cause eye and skin injury if not set up and used properly. Laser light is thousands of times more concentrated than light from any other kind of light source. This concentration of light can cause instant eye injuries, primarily by burning the retina (the light sensitive portion at the back of the eye). Even if you cannot feel “heat” from laser beam, it can still potentially injure or blind you or your audience. Even very small amounts of laser light are potentially hazardous even at long distances. Laser eye injuries can happen quicker than you can blink. It is incorrect to think that because these laser entertainment products use high speed scanned laser beams, that an individual laser beam is safe for eye exposure. It is also incorrect to assume that because the laser light is moving, it is safe. This is not true.
Since eye injuries can occur instantly, it is critical to prevent the possibility of any direct eye exposure. It is not legal to aim this laser projector into areas where people can be exposed. This is true even if it is aimed below people’s faces, such as on a dance floor.
· Do not operate the laser without first reading and understanding all safety and technical data in this manual. · Always set up and install all laser effects so that all laser light is at least 3 metres (9.8 feet) above the floor on which
people can stand. See the “Proper Usage” section later in this manual. · After set up, and prior to public use, test the laser to ensure proper function. Do not use if any defect is detected. · Laser Light – Avoid Eye or Skin Exposure to Direct or Scattered Light. · Do not point lasers at people or animals. · Never look into the laser aperture or laser beams. · Do not point lasers in areas where people can potentially be exposed, such as uncontrolled balconies, etc. · Do not point lasers at highly reflective surfaces, such as windows, mirrors and shiny metal objects. Even laser
reflections can be hazardous. · Never point a laser at aircraft, as this is a US Federal Offense. · Never point un-terminated laser beams into the sky. · Do not expose the output optic (aperture) to cleaning chemicals. · Do not use the laser if the housing is damaged, open, or if the optics appear damaged in any way. · Never leave this device running unattended. · In the United States, this laser product may not be purchased, sold, rented, leased or loaned for use unless the
recipient possesses a valid Class 4 laser light show variance from the US FDA CDRH. · This product must always be operated by a skilled and well-trained operator who is familiar with the valid Class 4 laser
light show variance from the CDRH as stated above. · The legal requirements for using laser entertainment products vary from country to country. The user is responsible
for the legal requirements at the location/country of use. · Always use appropriate lightning safety cables when hanging this projector overhead.

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

LASER EMISSION DATA
· Class 4 Laser Projector – Avoid Eye and Skin Exposure to Direct or Scattered Light! · This Laser Product is designated as Class 4 during all procedures of operation. · Further guidelines and safety programs for safe use of lasers can be found in the ANSI Z136.1 Standard
“For Safe Use of Lasers”, available from the Laser Institute of America: www.laserinstitute.org. Many local governments, corporations, agencies, military and others, require all lasers to be used under the guidelines of ANSI Z136.1.
UNITY Lasers s.r.o.
· Laser Classification Class 4 · Red Laser Medium AlGaInP, 639 nm, depending on model · Green Laser Medium InGaN, 520-525 nm, depending on model · Blue Laser Medium InGaN, 445 nm to 465 nm depending on model · Beam Diameter <10 mm at aperture · Divergence (each beam) <2 mrad · Maximum total output power 1,7 10W depending on model
LASER COMPLIANCE STATEMENT
· This laser product complies with FDA performance standards for laser products except for deviations pursuant to Laser Notice No. 56, dated May 8, 2019. This laser device is classified as a Class 4 demonstration laser product.
· No maintenance is required to keep this product in compliance with laser performance standards.

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

PRODUCT SAFETY LABEL LOCATION

1 31
2

5 46 7

ELITE 10 PRO FB4 (IP65)

11 32

5 46 7

ELITE 20 PRO FB4 (IP65)

11 32

5 46 7

ELITE 30 PRO FB4 (IP65)

FRONT PANEL
1. Hazard Warning Symbol 2. Exposure Label 3. Laser Light Warning Label
TOP PANEL
4. Danger Label 5. Certification Label 6. Caution Warning Label 7. Manufacturer Label 8. Aircraft Warning Label 9. Interlock Label
See next page for large reproductions of the product labels. All these labels must be intact and legible prior to using the projector.

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

PRODUCT SAFETY LABEL LOCATION [CONTINUED]

1 31
2

5 46 7 89 9

5 46 7

1 3

1 2

8 99

ELITE 60 PRO FB4 (IP65) ELITE 100 PRO FB4 (IP65)

UNITY Lasers s.r.o. | Unity Lasers, LLC
PRODUCT SAFETY LABELS

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

Logotype Danger Label

Hazard Warning Symbol Aperture Label Aircraft Warning Label Interlocked Housing Label
10

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)
Laser Light Warning Label

This product is in conformity with performance standards for laser products under 21 CFR Part 1040.10 and 1041.11 except with respect to those characteristics authorized by:

Variance Number: Effective Date: Variance Contact:

2020-V-1695 July 24, 2020 John Ward

Certification Label

Unity Lasers, LLC 1265 Upsala Road, Suite 1165 Sanford, FL 32771 www.unitylasers.com +1(407) 299-2088 info@unitylasers.com
Unity Lasers S.R.O. Odborarska 23 831 02 Bratislava Slovak Republic www.unitylasers.eu +421 265 411 355 info@unitylasers.eu
Model: XXXXXX Serial #: XXXXXX

Manufacturer Label

Caution Warning Label

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

INTERLOCK CONNECTION DIAGRAM

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

INSTRUCTIONS FOR USING E-STOP SYSTEM
Connect the E-stop box to the 3-pin interlock connector on the rear of the laser projector using a 3-PIN XLR cable.
** Note that the E-stop box has an available secondary interlock port. The secondary port is to be used to interface a secondary interlock device (e.x. door switch or pressure sensitive step pad). If a secondary interlock device is NOT used then the secondary port must have the bypass shunt plug inserted.

The diagram below outlines the pinout configuration for the 3-pin connection from E-STOP box to the rear of the projector.

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

THEORY OF OPERATION
“UNITY Laser projector” is supplied with “E-Stop Box” and “Remote Interlock Bypass” including one cable. If user doesn’t need additional “User E-Stop Switch”, “Remote Interlock Bypass” should be inserted into “Remote Interlock Connector” on “E-Stop Box”. If the user would like to use additional “User E-Stop Switch”, “Remote Interlock Bypass” should be removed from “User E-Stop Connector” on “E-Stop Box”. If the ,,User E-Stop switch” is used, then laser emission is ONLY possible, when it is in CLOSED state, and also all other safety features are satisfied (e.g. mushroom switch, keyswitches, scanfail safety, …)
PROPER USAGE
This product is for overhead mounting only. For safety purposes, this projector should be mounted on steady elevated platforms or sturdy overhead supports using suitable hanging clamps. In all cases, you must use safety cables. International laser safety regulations require that the laser products must be operated in the fashion illustrated below, with a minimum of 3 metres (9.8 ft.) of vertical separation between the floor and the lowest laser light vertically. Additionally, 2.5 metres of horizontal separation is required between laser light and the audience or other public spaces. The audience area can be passively protected by sliding the aperture cover plate upwards and fixing it in proper position by the two thumb screws.

Projector

Beams

3 meters
RIGGING
· Be sure that the structure onto which you are mounting this product can support its weight. · Mount the product securely. You can do this with a screw, a nut, and a bolt. You may also use a mounting
clamp if rigging this product onto a truss. The U-shaped support bracket has three mounting holes which may be used to secure the clamps to the projector. · When mounting this product overhead, always use a safety cable. · Always consider ease of access to the unit before deciding on a location for this product.

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

Caution use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
This Laser Product is designated as Class 4 during all procedures of operation.
REMINDER: In the United States, this laser product may not be purchased, sold, rented, leased or loaned for use unless the recipient possesses a valid Class 4 laser light show variance from the US FDA CDRH.
OPERATION
CONNECTING THE LASER SYSTEM 1. To control the system with an external signal such as Ethernet or ILDA, plug the corresponding cable into
its designated connector at the back of the unit. 2. Connect the Emergency STOP remote to the socket labled as a “Remote Input” with the supplied 3-pin
XLR cable. 3. Insert the Remote Interlock Bypass to the E-STOP Remote to disable the interlock (USA only). 4. Use supplied Neutrik powerCON power cable to connect the laser system to a main power supply usign
the input connector.
INSERT THE SAFETY KEYS 1. Turn the laser system key to the on position. 2. Turn the E-STOP remote key to the on position.
DISABLE THE INTERLOCK 1. Release the E-STOP button by pulling upwards. 2. Press the START button on the E-STOP remote.
TURNING OFF THE LASER SYSTEM 1. Turn off the key switch; and deactivate via the red mushroom switch on the E-stop box. You can remove the
3-pin Interlock bo too, if the laser will be kept for no use. (We recommend having a professional operator to keep the keys and 3-pin Interlock switch.) 2. Turn off the power to the projector via the power switch.

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

SAFETY TESTS
E-STOP FUNCTION
· With the projector operating and projecting laser light, press the red E-stop switch. The projector must shut off immediately.
· Fully extend the red E-stop switch, until a yellow collar is visible on the switch system. The projector must not emit any laser light.
· Press the start button on E-stop box. The projector should now re-start and begin emitting laser light. · Verify thar the emission indicatir is now lit.
INTERLOCK RESET FUNCTION (POWER)
· With the projector operating and projecting laser light, unplug the AC power cable. The projector must shut off immediately.
· Plug the power cable back in. The projector must not emit any laser light. · Press the start button on the E-stop box. The projector should now re-start and begin emitting laser light. · Verify that the emission indicator is now lit.
KEY SWITCH FUNCTION
· With the projector operating and projecting laser light, turn the key switch on the remote E-stop control unit to off. The projector must shut off immediately.
· Turn the key switch back to on. The projector must not emit any laser light. · Press the start button on the E-stop box. The projector should now re-start and begin emitting laser light. · Verify that the emission indicator is now lit.
INTERLOCK RESET FUNCTION (REMOTE INTERLOCK BYPASS)
· With the projectoroperating and projecting laser light, remove Remote Interlock Bypass. The projector must shut off immediately.
· Plug the Remote Interlock Bypass back in. The projector must not emit any laser light. · Press the start button on the E-stop box. The projector should now re-start and begin emitting laser light. · Verify that the emission indicator is now lit.
If any of the above tests fail, the projector must be taken out of service and returned to the manufacturer for repair.

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

PRODUCT SPECIFICATION (ELITE 10 PRO FB4 (IP65))

Product Name: Type Of Laser: Guaranteed Optical Output: Suitable For: Control Signal: Scanning System: Scan Angle: Safety: Weight:
Package Includes:
R | G | B [mW]: Beam Size [mm]: Beam Divergence: Modulation: Power Requirements: Consumption: Operation Temperature: Ingress Rating:
System Features:
Laser Safety Features:
Notice:
Dimensions [mm]:

Unity ELITE 10 PRO FB4 (IP65)
Full-color, Semiconductor diode laser system
>11W
Lighting professionals: large indoor venues (up to 10,000 people), medium outdoor shows. Beam show, text, graphic, and mapping capable
Pangolin FB4 DMX [Ethernet, ArtNet, DMX, sACN, ILDA | PC, Lighting Console, Auto Mode, Mobile App: Apple, Android] 40,000 points per second @ 8°
50°
Fully complies with the latest EN 60825-1 and FDA regulations
13.5kg
Laser projector w/ FB4 DMX, IP65 housing, protective case, Estop box, Estop cable (10M/30ft), ethernet cable (10M/30ft), power cable (1.5M/4.5ft), interlock, keys, outdoor RJ45 connectors, manual, quickstart guide, variance card (* service dongle if outside US)
3,000 | 4,000 | 4,000
6 x 6
<1.0mrad [Full Angle] Analog, up to 100kHz
100-240V/50Hz-60Hz
Max. 350W
(-10 °C)-45 °C
IP65
All the adjustments, such as power output of each color, X & Y axes invert, X & Y size and position, safety, etc., are managed digitally by the FB4 control system. Ethernet in, power in/out, DMX in/out, Estop in/out, ILDA in.
Keyed interlock, Emission delay, Magnetic interlock, Scan-fail safety, Mechanical shutter, Adjustable aperture masking plate
*Due to Advanced Optical Correction technology used in our laser systems, each laser colour’s optical power output may slightly differ from the specification of the respective laser module(s) installed. This does not affect the total guaranteed power output
Depth: 358 Width: 338 Height: 191

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

FRONT & REAR PANEL VIEW (ELITE 10 PRO FB4 (IP65))

3 1

5 10 6 7

9 8 4 11

NO.

Name

Function

Laser Aperture

Laser output, do not look directly into this aperture.

2. Aperture Masking Plate Can be moved up and down when two locklng bolts are loosened.

Laser Emission

When this Indicator is lit up the laser system is ready to emit the laser radlation as soon as It recelves Instructions from control software.

3-Pin Interlock

Laser output Is avallable only when the Interlock is connected. It could be used to connect a laser emergency switch.

Key Switch/ Power ON

Turn the key switch ON to allow laser output.

Fuse

Current rating 3.15A, slow acting type.

AC100-240V power input and output sockets. With output

Power IN & OUT

feature you can connect the device to one another using the input and output sockets. They must be the same fixtures. DO

NOT mix fixtures.

DMX IN & OUT

Use these ports to connect DMX control signal or to daisy chain the DMX signal between multiple laser display systems.

Ethernet

Used to control the laser system via a PC or via ArtNET.

The inbuilt control interface allows you to control the laser via Ethernet

and DMX/ArtNet, but it also handles all the basic settins of the laser

10.

FB4 Control Interface

system master size and positions, method of control, colour settings etc. All of these settings can be accessed through the menu using the

endless rotary knob and once saved, they are stored on included mini

SD card.

11.

Safety Eyelet

Use this together with approriate safety wire to secure the system against unexpected fall.

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

DIMENSION DETAILS (ELITE 10 PRO FB4 (IP65))

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

PRODUCT SPECIFICATION (ELITE 20 PRO FB4 (IP65))

Unity ELITE PRO FB4 (IP65)
Full-color, Semiconductor diode laser system
>22W
Lighting professionals: arena sized venues (up to 30,000 people), outdoor shows. Beam show, text, graphic, and mapping capable
Pangolin FB4 DMX [Ethernet, ArtNet, DMX, sACN, ILDA | PC, Lighting Console, Auto Mode, Mobile App: Apple, Android] 40,000 points per second @ 8°
50°
Fully complies with the latest EN 60825-1 and FDA regulations
26kg
Laser projector w/ FB4 DMX, IP65 housing, protective case, Estop box, Estop cable (10M/30ft), ethernet cable (10M/30ft), power cable (1.5M/4.5ft), interlock, keys, outdoor RJ45 connectors, manual, quickstart guide, variance card (* service dongle if outside US)
6,000 | 8,000 | 8,000
6 x 6
<1.0mrad [Full Angle] Analog, up to 100kHz
100-240V/50Hz-60Hz
Max. 1000W
(-10 °C)-45 °C
IP65
All the adjustments, such as power output of each color, X & Y axes invert, X & Y size and position, safety, etc., are managed digitally by the FB4 control system. Ethernet in, power in/out, DMX in/out, Estop in/out, ILDA in.
Keyed interlock, Emission delay, Magnetic interlock, Scan-fail safety, Mechanical shutter, Adjustable aperture masking plate
*Due to Advanced Optical Correction technology used in our laser systems, each laser colour’s optical power output may slightly differ from the specification of the respective laser module(s) installed. This does not affect the total guaranteed power output
Depth: 431 Width: 394 Height: 230

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

FRONT & REAR PANEL VIEW (ELITE 20 PRO FB4 (IP65))

5 9 10 4

6 7 11

NO.

Name

Function

Laser Aperture

Laser output, do not look directly into this aperture.

2. Aperture Masking Plate Can be moved up and down when two locklng bolts are loosened.

Laser Emission

When this Indicator is lit up the laser system is ready to emit the laser radlation as soon as It recelves Instructions from control software.

3-Pin Interlock

Laser output Is avallable only when the Interlock is connected. It could be used to connect a laser emergency switch.

Key Switch/ Power ON

Turn the key switch ON to allow laser output.

Fuse

Current rating 3.15A, slow acting type.

AC100-240V power input and output sockets. With output

Power IN & OUT

feature you can connect the device to one another using the input and output sockets. They must be the same fixtures. DO

NOT mix fixtures.

DMX IN & OUT

Use these ports to connect DMX control signal or to daisy chain the DMX signal between multiple laser display systems.

Ethernet

Used to control the laser system via a PC or via ArtNET.

The inbuilt control interface allows you to control the laser via Ethernet

and DMX/ArtNet, but it also handles all the basic settins of the laser

10.

FB4 Control Interface

system master size and positions, method of control, colour settings etc. All of these settings can be accessed through the menu using the

endless rotary knob and once saved, they are stored on included mini

SD card.

11.

Safety Eyelet

Use this together with approriate safety wire to secure the system against unexpected fall.

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

DIMENSION DETAILS (ELITE 20 PRO FB4 (IP65))

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

PRODUCT SPECIFICATION (ELITE 30 PRO FB4 (IP65))

Unity ELITE 30 PRO FB4 (IP65)
Full-color, Semiconductor diode laser system
>33W
Lighting professionals: arena sized venues (up to 40,000 people), larger outdoor shows. Beam show, text, graphic, and mapping capable
Pangolin FB4 DMX [Ethernet, ArtNet, DMX, sACN, ILDA | PC, Lighting Console, Auto Mode, Mobile App: Apple, Android] 40,000 points per second @ 8°
50°
Fully complies with the latest EN 60825-1 and FDA regulations
32kg
Laser projector w/ FB4 DMX, IP65 housing, protective case, Estop box, Estop cable (10M/30ft), ethernet cable (10M/30ft), power cable (1.5M/4.5ft), interlock, keys, outdoor RJ45 connectors, manual, quickstart guide, variance card (* service dongle if outside US)
9,000 | 12,000 | 12,000
6 x 6
<1.0mrad [Full Angle] Analog, up to 100kHz
100-240V/50Hz-60Hz
Max. 1200W
(-10 °C)-45 °C
IP65
All the adjustments, such as power output of each color, X & Y axes invert, X & Y size and position, safety, etc., are managed digitally by the FB4 control system. Ethernet in, power in/out, DMX in/out, Estop in/out, ILDA in.
Keyed interlock, Emission delay, Magnetic interlock, Scan-fail safety, Mechanical shutter, Adjustable aperture masking plate
*Due to Advanced Optical Correction technology used in our laser systems, each laser colour’s optical power output may slightly differ from the specification of the respective laser module(s) installed. This does not affect the total guaranteed power output
Depth: 485 Width: 417 Height: 248

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

FRONT & REAR PANEL VIEW (ELITE 30 PRO FB4 (IP65))

31 2

5 4

NO.

Name

Function

Laser Aperture

Laser output, do not look directly into this aperture.

2. Aperture Masking Plate Can be moved up and down when two locklng bolts are loosened.

Laser Emission

When this Indicator is lit up the laser system is ready to emit the laser radlation as soon as It recelves Instructions from control software.

3-Pin Interlock

Laser output Is avallable only when the Interlock is connected. It could be used to connect a laser emergency switch.

Key Switch/ Power ON

Turn the key switch ON to allow laser output.

Fuse

Current rating 3.15A, slow acting type.

AC100-240V power input and output sockets. With output

Power IN & OUT

feature you can connect the device to one another using the input and output sockets. They must be the same fixtures. DO

NOT mix fixtures.

DMX IN & OUT

Use these ports to connect DMX control signal or to daisy chain the DMX signal between multiple laser display systems.

Ethernet

Used to control the laser system via a PC or via ArtNET.

The inbuilt control interface allows you to control the laser via Ethernet

and DMX/ArtNet, but it also handles all the basic settins of the laser

10.

FB4 Control Interface

system master size and positions, method of control, colour settings etc. All of these settings can be accessed through the menu using the

endless rotary knob and once saved, they are stored on included mini

SD card.

11.

Safety Eyelet

Use this together with approriate safety wire to secure the system against unexpected fall.

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

DIMENSION DETAILS (ELITE 30 PRO FB4 (IP65))

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

PRODUCT SPECIFICATION (ELITE 60 PRO FB4 (IP65))

Unity ELITE 60 PRO FB4 (IP65)
Full-color, Semiconductor diode laser system
>103W
Lighting professionals: Stadiums, arenas. Huge outdoor shows. City scape and landmark projections (visibility for kilometers / miles away)
Pangolin FB4 DMX [Ethernet, ArtNet, DMX, sACN, ILDA | PC, Lighting Console, Auto Mode, Mobile App: Apple, Android] 30,000 points per second @ 8°
45°
Fully complies with the latest EN 60825-1 and FDA regulations
75kg
Laser projector w/ FB4 DMX, IP65 housing, heavy duty flight case, Estop box, Estop cable (10M/30ft), ethernet cable (10M/30ft), power cable (1.5M/4.5ft), interlock, keys, outdoor RJ45 connectors, manual, quickstart guide, variance card (* service dongle if outside US)
22,200 | 33,600 | 48,000
7.5 x 7.5
<1.0mrad [Full Angle] Analog, up to 100kHz
100-240V/50Hz-60Hz
Max. 2200W
(-10 °C)-45 °C
IP65
All the adjustments, such as power output of each color, X & Y axes invert, X & Y size and position, safety, etc., are managed digitally by the FB4 control system. Ethernet in, power in/out, DMX in/out, Estop in/out, ILDA in.
Keyed interlock, Emission delay, Magnetic interlock, Scan-fail safety, Mechanical shutter, Adjustable aperture masking plate
*Due to Advanced Optical Correction technology used in our laser systems, each laser colour’s optical power output may slightly differ from the specification of the respective laser module(s) installed. This does not affect the total guaranteed power output
Depth: 695 Width: 667 Height: 279

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

FRONT & REAR PANEL VIEW (ELITE 60 PRO FB4 (IP65))

3 1

5 10 6

9 84 7

NO.

Name

Function

Laser Aperture

Laser output, do not look directly into this aperture.

2. Aperture Masking Plate Can be moved up and down when two locklng bolts are loosened.

Laser Emission

When this Indicator is lit up the laser system is ready to emit the laser radlation as soon as It recelves Instructions from control software.

3-Pin Interlock

Laser output Is avallable only when the Interlock is connected. It could be used to connect a laser emergency switch.

Key Switch/ Power ON

Turn the key switch ON to allow laser output.

Fuse

Current rating 3.15A, slow acting type.

AC100-240V power input and output sockets. With output

Power IN

feature you can connect the device to one another using the input and output sockets. They must be the same fixtures. DO

NOT mix fixtures.

DMX IN & OUT

Use these ports to connect DMX control signal or to daisy chain the DMX signal between multiple laser display systems.

Ethernet

Used to control the laser system via a PC or via ArtNET.

The inbuilt control interface allows you to control the laser via Ethernet

and DMX/ArtNet, but it also handles all the basic settins of the laser

10.

FB4 Control Interface

system master size and positions, method of control, colour settings etc. All of these settings can be accessed through the menu using the

endless rotary knob and once saved, they are stored on included mini

SD card.

11.

Safety Eyelet

Use this together with approriate safety wire to secure the system against unexpected fall.

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

DIMENSION DETAILS (ELITE 60 PRO FB4 (IP65))

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

PRODUCT SPECIFICATION (ELITE 100 PRO FB4 (IP65))

Unity ELITE 100 PRO FB4 (IP65)
Full-color, Semiconductor diode laser system
>103W
Lighting professionals: Stadiums, arenas. Huge outdoor shows. City scape and landmark projections (visibility for kilometers / miles away)
Pangolin FB4 DMX [Ethernet, ArtNet, DMX, sACN, ILDA | PC, Lighting Console, Auto Mode, Mobile App: Apple, Android] 30,000 points per second @ 8°
40°
Fully complies with the latest EN 60825-1 and FDA regulations
75kg
Laser projector w/ FB4 DMX, IP65 housing, heavy duty flight case, Estop box, Estop cable (10M/30ft), ethernet cable (10M/30ft), power cable (1.5M/4.5ft), interlock, keys, outdoor RJ45 connectors, manual, quickstart guide, variance card (* service dongle if outside US)
22,200 | 33,600 | 48,000
7.5 x 7.5
<1.0mrad [Full Angle] Analog, up to 100kHz
100-240V/50Hz-60Hz
Max. 2200W
(-10 °C)-45 °C
IP65
All the adjustments, such as power output of each color, X & Y axes invert, X & Y size and position, safety, etc., are managed digitally by the FB4 control system. Ethernet in, power in/out, DMX in/out, Estop in/out, ILDA in.
Keyed interlock, Emission delay, Magnetic interlock, Scan-fail safety, Mechanical shutter, Adjustable aperture masking plate
*Due to Advanced Optical Correction technology used in our laser systems, each laser colour’s optical power output may slightly differ from the specification of the respective laser module(s) installed. This does not affect the total guaranteed power output
Depth: 695 Width: 667 Height: 279

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

FRONT & REAR PANEL VIEW (ELITE 100 PRO FB4 (IP65))

3 1

10 6

9 84 7

11 11

NO.

Name

Function

Laser Aperture

Laser output, do not look directly into this aperture.

2. Aperture Masking Plate Can be moved up and down when two locklng bolts are loosened.

Laser Emission

When this Indicator is lit up the laser system is ready to emit the laser radlation as soon as It recelves Instructions from control software.

3-Pin Interlock

Laser output Is avallable only when the Interlock is connected. It could be used to connect a laser emergency switch.

Key Switch/ Power ON

Turn the key switch ON to allow laser output.

Fuse

Current rating 20A, slow acting type.

AC100-240V power input and output sockets. With output

Power IN

feature you can connect the device to one another using the input and output sockets. They must be the same fixtures. DO

NOT mix fixtures.

DMX IN & OUT

Use these ports to connect DMX control signal or to daisy chain the DMX signal between multiple laser display systems.

Ethernet

Used to control the laser system via a PC or via ArtNET.

The inbuilt control interface allows you to control the laser via Ethernet

and DMX/ArtNet, but it also handles all the basic settins of the laser

10.

FB4 Control Interface

system master size and positions, method of control, colour settings etc. All of these settings can be accessed through the menu using the

endless rotary knob and once saved, they are stored on included mini

SD card.

11.

Safety Eyelet

Use this together with approriate safety wire to secure the system against unexpected fall.

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

DIMENSION DETAILS (ELITE 100 PRO FB4 (IP65))

UNITY Lasers s.r.o. | Unity Lasers, LLC

ELITE 10/20/30/60/100 PRO FB4 (IP65) Operational Manual (Revision 2024-11)

TECHNICAL INFORMATION – MAINTENANCE
GENERAL CLEANING INSTRUCTIONS – TO BE DONE BY USER
Due to fog residue, smoke, and dust cleaning the external body of the projector should be carried out periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture operares (I.e. smoke, fog residue, dust, dew). In heavy club use we recommend cleaning on a monthly basis. Periodic cleaning will wnsure longevity and crisp output.
· Unplug the product from power. · Wait until the product is cold. · Use a soft damp cloth to wipe down the outside projector casing. · Use compressed air and a brush to wipe down the cooling vents and fan grill(s). · Clean the glass panel (laser aperture) with glass cleaner and a soft cloth when dirty. · Gently polish the glass surface until it is free of haze and lint. · Always be sure to dry all parts completely before plugging the unit back in.
SERVICE
There are no user serviceable parts inside this unit. Do not attempt any repairs yourself; doing so will void your manufactures warranty. In the unlikely event your unit may require service, please contact us directly or your local distributor, who will help you with a repair or replacement. We will not accept any liability for any resulting damages caused by the non-observance of this manual or any unauthorized modofication to this unit.

Documents / Resources

UNITY LASERS ELITE 10 Series Laser Unity [pdf] User Manual
ELITE 10 PRO FB4, ELITE 20 PRO FB4, ELITE 30 PRO FB4, ELITE 60 PRO FB4, ELITE 100 PRO FB4, ELITE 10 Series Laser Unity, ELITE 10 Series, Laser Unity, Unity

References

User Manual

ELITE 10 Series Laser Unity

Specifications

Product Usage Instructions

Introduction

What is Included

Unpacking Instructions

Safety Notes

Laser Compliance Statement

Product Safety Labels

Instructions for Using E-Stop System

Theory of Operation

Proper Usage

Rigging

Operation

Safety Tests

Model Specification

Service

FAQ

Q: Can the ELITE PRO FB4 laser system be used for
audience-scanning applications?

Documents / Resources

References

Leave a comment

Cancel reply