Isine
ndhelikake
SKYDANCE DSA DMX512-SPI Decoder lan RF Controller
Fitur
- DMX512 kanggo decoder SPI lan RF controller karo tampilan digital.
- Kompatibel karo 42 jinis digital IC RGB utawa RGBW LED strip, jinis IC lan R/G/B urutan bisa disetel.
IC sing kompatibel: TM1803, TM1804, TM1809, TM1812, UCS1903, UCS1909, UCS1912, SK6813,
UCS2903, UCS2909, UCS2912, WS2811, WS2812, WS2813, WS2815, TM1829, TLS3001, TLS3002, GW6205, MBI6120, TM1814B(RGBW6812), 2813GBWRWS(2814GBWRWS), 8904GBWRWS(6803GBWRWS), 1101GBWRWS(705GBWRW), 6909GBWRWS(6912GBWRW), 8803GBWRWS(8806GBWRW), 2801GBWRWS(2803GBWRW), 9813GBWRWS(9822GBWRW), 1914GBWRWS(8206GBWRWS) , LPD8208, D2904, UCS16804, UCS16825, LPDXNUMX, LPDXNUMX, WSXNUMX, WSXNUMX, PXNUMX, SKXNUMX, TMXNUMXA, GSXNUMX, GSXNUMX, SMXNUMX,. - Mode decode DMX, mode mandiri lan mode RF bisa dipilih.
- Antarmuka standar DMX512 sing cocog, atur alamat wiwitan decode DMX kanthi tombol.
- Ing mode mandiri, ganti mode, kacepetan utawa padhang kanthi tombol.
- Ing mode RF, cocog karo remot kontrol RF 2.4G RGB/RGBW.
- 32 jinis mode dinamis, kalebu balapan jaran, nguber, aliran, jejak utawa gaya owah-owahan bertahap.
Parameter teknis
| Input lan Output | |
| Input voltage | 5-24VDC |
| konsumsi daya | 1W |
| Sinyal input | DMX512 + RF 2.4GHz |
| Sinyal output | SPI(TTL) x 3 |
| Mode dinamis | 32 |
|
Titik kontrol |
170 piksel (RGB 510 CH) Maks 900 piksel |
| Warranty lan Proteksi | |
| Garansi | 5 taun |
| pangayoman | Polaritas Reverse |
| Safety lan EMC | |
|
Standar EMC (EMC) |
ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4 |
| Standar Keamanan (LVD) | EN 62368-1:2020+A11:2020 |
| Sertifikasi | CE, EMC, LVD, RED |
| Lingkungan | |
| Suhu operasi | Ta: -30 OC ~ +55 OC |
| Suhu kasus (Maks.) | T c:+65OC |
| Rating IP | IP20 |
Struktur Mekanik lan Instalasi
DIMENSI
Wiring diagram
Cathetan:
- Yen SPI LED piksel Strip kontrol kabel siji, DATA lan CLK output padha, kita bisa nyambung nganti 6 ngudani LED.
- Yen SPI LED piksel Strip kontrol loro-kabel, kita bisa nyambung nganti 3 ngudani LED.
Operasi
Jinis IC, urutan RGB lan setelan dawa piksel
- Sampeyan kudu mesthekake yen jinis IC, urutan RGB lan dawa piksel strip LED wis bener.
- Pencet dawa tombol M lan ◀, nyiapake jinis IC persiyapan, urutan RGB, dawa piksel, layar kosong otomatis, Pencet cendhak tombol M kanggo ngalih papat item. Pencet tombol ◀ utawa ▶ kanggo nyetel nilai saben item. Pencet dawa tombol M kanggo 2 detik, utawa wektu entek 10 detik, metu setelan.
Tabel jinis IC:
| Ora. | Jinis IC | Sinyal output |
| C11 | TM1803 | DATA |
| C12 | TM1809,TM1804,TM1812,UCS1903,UCS1909,UCS1912,SK6813 UCS2903,UCS2909,UCS2912,WS2811,WS2812,WS2813,WS2815 | DATA |
| C13 | TM1829 | DATA |
| C14 | TLS3001, TLS3002 | DATA |
| C15 | GW6205 | DATA |
| C16 | MBI6120 | DATA |
| C17 | TM1814B(RGBW) | DATA |
| C18 | SK6812(RGBW),WS2813(RGBW),WS2814(RGBW) | DATA |
| C19 | UCS8904B(RGBW) | DATA |
| C21 | LPD6803,LPD1101,D705,UCS6909,UCS6912 | DATA, CLK |
| C22 | LPD8803, LPD8806 | DATA, CLK |
| C23 | WS2801, WS2803 | DATA, CLK |
| C24 | P9813 | DATA, CLK |
| C25 | SK9822 | DATA, CLK |
| C31 | TM1914A | DATA |
| C32 | GS8206, GS8208 | DATA |
| C33 | UCS2904 | DATA |
| C34 | SM16804 | DATA |
| C35 | SM16825 | DATA |
- Urutan RGB: O-1 - O-6 nuduhake enem urutan (RGB, RBG, GRB, GBR, BRG, BGR).
- Dawane piksel: Range yaiku 008-900.
- Layar kosong otomatis: aktifake ("bon") utawa mateni ("boF") layar kosong otomatis.
mode decode DMX
- Pencet cendhak tombol M, nalika ditampilake 001-999, ketik mode decode DMX.
- Pencet tombol ◀ utawa ▶ kanggo ngganti alamat wiwitan decode DMX (001-999), penet dawa kanggo nyetel cepet.
- Pencet dawa tombol M kanggo 2 detik, nyiapake nomer decode persiyapan lan pirang-pirang piksel. Pencet cendhak tombol M kanggo ngoper rong item.
mode decode DMX
Pencet tombol ◀ utawa ▶ kanggo nyetel nilai saben item. Nomer decode (tampilan "dno"): nomer saluran decode DMX, kisaran 003-600 (kanggo RGB). Akeh piksel (tampilan "Pno") Saben dawa kontrol saluran DMX 3 (kanggo RGB), kisaran dawane 001 piksel. Pencet dawa tombol M kanggo 2 detik, utawa wektu entek 10 detik, metu setelan. - Yen ana input sinyal DMX, bakal mlebu mode decode DMX kanthi otomatis.
Kanggo example, dekoder DMX-SPI nyambung karo strip RGB: data DMX saka konsol DMX512:
Output dekoder DMX-SPI (alamat wiwitan: 001, nomer saluran decode: 18, saben 3 dawa kontrol saluran: 1):
Output dekoder DMX-SPI (alamat wiwitan: 001, nomer saluran decode: 18, saben 3 dawa kontrol saluran: 3):
Mode mandiri
- Pencet cendhak tombol M, nalika nampilake P01-P32, ketik mode mandiri.
- Pencet tombol ◀ utawa ▶ kanggo ngganti nomer mode dinamis (P01-P32).
- Saben mode bisa nyetel kacepetan lan padhange. Pencet dawa tombol M kanggo 2 detik, nyiapake kacepetan lan padhange mode persiyapan. Pencet cendhak tombol M kanggo ngoper rong item. Pencet tombol ◀ utawa ▶ kanggo nyetel nilai saben item. Kacepetan mode: 1-10 tingkat kacepetan (S-1, S-9, SF). Mode padhange: 1-10 tingkat padhange (b-1, b-9, bF). Pencet dawa tombol M kanggo 2 detik, utawa wektu entek 10 detik, metu setelan.
- Ketik mode mandiri mung nalika sinyal DMX pedhot utawa ilang.
- Mode mandiri
- Kacepetan (8 level)
- Padhang (10 level, 100％)
| Ora. | jeneng | Ora. | jeneng | Ora. | jeneng |
| P01 | Lomba jaran abang lemah putih | P12 | Biru Putih nguber | P23 | Ungu ngambang |
| P02 | Lomba jaran ijo lemah putih | P13 | Green Cyan nguber | P24 | RGBW ngambang |
| P03 | Pacuan jaran biru lemah putih | P14 | RGB kejar | P25 | Red Yellow Float |
| P04 | Pacuan jaran kuning lemah biru | P15 | 7 warna kejar | P26 | Green Cyan float |
| P05 | Pacuan jaran jaran biru lemah | P16 | Meteor biru | P27 | Biru Ungu Float |
| P06 | Pacuan jaran ungu lemah biru | P17 | Meteor ungu | P28 | Biru Putih Ngambang |
| P07 | Pacuan jaran 7 warna | P18 | Meteor putih | P29 | 6 warna warni |
| P08 | Pacuan jaran 7 werna nutup + mbukak | P19 | 7 warna meteor | P30 | 6 werna alus bagean |
| P09 | 7 werna lomba jaran multi nutup + mbukak | P20 | Ngambang abang | P31 | 7 werna mlumpat sectionally |
| P10 | 7 warna scan tutup + mbukak | P21 | Ngambang ijo | P32 | 7 werna strobo sectionally |
| P11 | 7 warna multi-scan tutup + mbukak | P22 | Biru ngambang |
Mode RF
Cocokake: Pencet dawa tombol M lan ▶ kanggo 2 detik, tampilan "RLS", sajrone 5 detik, pencet tombol on/off saka remot RGB, tampilan "RLO", pertandhingan sukses, banjur gunakake remot RF kanggo ngganti nomer mode, nyetel kacepetan utawa padhang. Busak: Pencet dawa tombol M lan ▶ kanggo 5 detik, nganti ditampilake "RLE", busak kabeh remot RF sing cocog.
Mulihake parameter standar pabrik
- Pencet dawa tombol ◀ lan ▶, mulihake parameter standar pabrik, nampilake "RES".
- Parameter standar pabrik: mode decode DMX, alamat wiwitan decode DMX yaiku 1, nomer decode yaiku 510, pirang-pirang piksel 1, nomer mode dinamis yaiku 1, jinis chip yaiku TM1809, urutan RGB, dawa piksel 170, mateni layar kosong otomatis, tanpa cocog RF remot
Dokumen / Sumber Daya
 |
SKYDANCE DSA DMX512-SPI Decoder lan RF Controller [pdf] Pandhuan pangguna DSA, DMX512-SPI Decoder lan RF Controller, Decoder lan RF Controller, RF Controller, DMX512-SPI Decoder, DSA, Decoder |
