Litaba
pata
SKYDANCE DSA DMX512-SPI Decoder le RF Controller
Likaroloana
- DMX512 ho SPI decoder le RF controller e nang le ponts'o ea dijithale.
- E lumellana le mefuta e 42 ea dijithale IC RGB kapa RGBW LED strip, mofuta oa IC le odara ea R/G/B e ka hlophisoa.
Li-IC tse lumellanang: TM1803, TM1804, TM1809, TM1812, UCS1903, UCS1909, UCS1912, SK6813,
UCS2903, UCS2909, UCS2912, WS2811, WS2812, WS2813, WS2815, TM1829, TLS3001, TLS3002, GW6205, MBI6120, TM1814B(6812B(RCS2813GB2814), WRPD8904W6803GB1101GB705), , LPD6909, D6912, UCS8803, UCS8806, LPD2801, LPD2803, WS9813, WS9822, P1914, SK8206, TM8208A, GS2904, GS16804, UCS16825, UCSXNUMX. - Mokhoa oa ho khetha oa DMX, mokhoa oa ho ema o le mong le mokhoa oa RF o ka khethoang.
- Sebopeho se lumellanang le DMX512 se tloaelehileng, seta aterese ea ho qala ea DMX ka likonopo.
- Tlas'a mokhoa o ikemetseng, fetola mokhoa, lebelo kapa khanya ka libotlolo.
- Tlas'a RF mode, bapisa le RF 2.4G RGB/RGBW remote control.
- Mefuta e 32 e matla, e kenyelletsa lebelo la lipere, ho lelekisa, ho phalla, tsela kapa mokhoa oa ho fetoha butle butle.
Tekheniki Parameters
| Kenyeletso le Sephetho | |
| Keletso voltage | 5-24VDC |
| Tšebeliso ea matla | 1W |
| Lets'oao la ho kenya | DMX512 + RF 2.4GHz |
| Letshwao la tlhahiso | SPI(TTL) x 3 |
| Mokhoa o matla | 32 |
|
Laola matheba |
170 pixels (RGB 510 CH) Max 900pixels |
| Tiisetso le Tshireletso | |
| Tiisetso | 5 lilemo |
| Tshireletso | Khutlela Polarity |
| Tšireletseho le EMC | |
|
EMC e tloaelehileng (EMC) |
ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4 |
| Tekanyetso ea polokeho(LVD) | EN 62368-1:2020+A11:2020 |
| Setifikeiti | CE,EMC,LVD,RED |
| Tikoloho | |
| Mocheso oa ts'ebetso | Ta: -30 OC ~ +55 OC |
| Thempereichara ea boholo (Boholo.) | T c:+65OC |
| Lintlha tsa IP | IP20 |
Mechanical Structures le Installations
LIEKETSENG
Setšoantšo sa wiring
Hlokomela:
- Haeba mohala oa pixel oa SPI LED e le taolo ea terata e le 'ngoe, tlhahiso ea DATA le CLK e tšoana, re ka hokela ho fihla ho likhoele tsa LED tse 6.
- Haeba mohala oa pixel oa SPI LED e le taolo ea terata tse peli, re ka hokela likhoele tse 3 tsa LED.
Tshebetso
Mofuta oa IC, odara ea RGB le litlhophiso tsa bolelele ba pixel
- Pele u tlameha ho netefatsa hore mofuta oa IC, odara ea RGB le bolelele ba pixel ea lesela la LED li nepahetse.
- Tobetsa nako e telele M le ◀ konopo, lokisetsa mofuta oa IC oa ho seta, tatellano ea RGB, bolelele ba pixel, skrine e se nang letho, tobetsa M hakhutšoanyane ho fetola ntho e mene. Tobetsa ◀ kapa ▶ konopo ho beha boleng ba ntho ka 'ngoe. Tobetsa nako e telele konopo ea M bakeng sa 2s, kapa timeout 10s, tlohela ho seta.
Tafole ea mofuta oa IC:
| Che. | Mofuta oa IC | Letshwao la tlhahiso |
| C11 | TM1803 | DATA |
| C12 | TM1809,TM1804,TM1812,UCS1903,UCS1909,UCS1912,SK6813 UCS2903,UCS2909,UCS2912,WS2811,WS2812,WS2813,WS2815 | DATA |
| C13 | TM1829 | DATA |
| C14 | TLS3001,TLS3002 | DATA |
| C15 | GW6205 | DATA |
| C16 | MBI6120 | DATA |
| C17 | TM1814B(RGBW) | DATA |
| C18 | SK6812(RGBW),WS2813(RGBW),WS2814(RGBW) | DATA |
| C19 | UCS8904B(RGBW) | DATA |
| C21 | LPD6803,LPD1101,D705,UCS6909,UCS6912 | DATA, CLK |
| C22 | LPD8803,LPD8806 | DATA, CLK |
| C23 | WS2801,WS2803 | DATA, CLK |
| C24 | P9813 | DATA, CLK |
| C25 | SK9822 | DATA, CLK |
| C31 | TM1914A | DATA |
| C32 | GS8206,GS8208 | DATA |
| C33 | UCS2904 | DATA |
| C34 | SM16804 | DATA |
| C35 | SM16825 | DATA |
- Taelo ea RGB: O-1 - O-6 e bontša taelo e tšeletseng (RGB, RBG, GRB, GBR, BRG, BGR).
- Bolelele ba pixel: Range ke 008-900.
- Skrine se se nang letho se iketselitseng: nolofalletsa ("bon") kapa tima ("boF") skrineng se se nang letho.
Mokhoa oa ho khetha DMX
- Tobetsa ka nako e khuts'oane konopo ea M, ha o bonts'a 001-999, kenya mokhoa oa DMX decode.
- Tobetsa ◀ kapa ▶ konopo ho fetola aterese ea ho qala ea DMX decode(001-999), tobetsa nako e telele ho lokisa kapele.
- Tobetsa nako e telele konopo ea M bakeng sa 2s, lokisetsa nomoro ea ho seta le lipikselse tse ngata. Tobetsa konopo ea M ho fetola lintho tse peli.
Mokhoa oa ho khetha DMX
Tobetsa ◀ kapa ▶ konopo ho beha boleng ba ntho ka 'ngoe. Nomoro ea ho khetha (bontša "dno"): Nomoro ea mocha oa DMX, sebaka ke 003-600 (bakeng sa RGB). Lipikselse tse ngata (pontšo "Pno") Bolelele bo bong le bo bong ba taolo ea kanale ea 3 DMX(bakeng sa RGB), sebaka ke bolelele ba lipikselse tse 001. Tobetsa nako e telele konopo ea M bakeng sa 2s, kapa timeout 10s, tlohela ho seta. - Haeba ho na le lets'oao la lets'oao la DMX, le tla kenya mokhoa oa ho khetholla DMX ka bohona.
Bakeng sa mohlalaample, DMX-SPI decoder e hokahana le strip ea RGB: data ea DMX ho tsoa ho khomphutha ea DMX512:
DMX-SPI decoder e hlahisoang (aterese ea ho qala: 001, decode nomoro ea mocha: 18, bolelele bo bong le bo bong ba taolo ea 3: 1):
DMX-SPI decoder e hlahisoang (aterese ea ho qala: 001, decode nomoro ea mocha: 18, bolelele bo bong le bo bong ba taolo ea 3: 3):
Mokhoa o ikemetseng
- Tobetsa hakhutšoanyane M konopo, ha o bonts'a P01-P32, kenya mokhoa o ikemetseng.
- Tobetsa ◀ kapa ▶ konopo ho fetola dynamic mode number(P01-P32).
- Mokhoa o mong le o mong o ka fetola lebelo le khanya. Tobetsa nako e telele senotlolo sa M bakeng sa 2s, lokisetsa lebelo la mokhoa oa ho seta le ho khanya. Tobetsa konopo ea M ho fetola lintho tse peli. Tobetsa ◀ kapa ▶ konopo ho beha boleng ba ntho ka 'ngoe. Lebelo la mokhoa: lebelo la boemo ba 1-10 (S-1, S-9, SF). Khanya ea mokhoa: khanya ea boemo ba 1-10(b-1, b-9, bF). Tobetsa nako e telele konopo ea M bakeng sa 2s, kapa timeout 10s, tlohela ho seta.
- Kenya mokhoa oa ho ema o le mong ha feela lets'oao la DMX le khaotsoe kapa le lahlehile.
- Mokhoa o ikemetseng
- Lebelo (8 level)
- Khanya (boemo ba 10％)
| Che. | Lebitso | Che. | Lebitso | Che. | Lebitso |
| P01 | Peiso ea pere e khubelu mobu o mosoeu | P12 | Lelekisa Blue White | P23 | Phala e pherese |
| P02 | Peiso ea pere e tala mobu o mosoeu | P13 | Green Cyan lelekisa | P24 | RGBW e phaphamala |
| P03 | Peiso e putsoa mobung o mosoeu | P14 | RGB e lelekisa | P25 | Sefate se Sefubelu se Sehla |
| P04 | Lebelo la pere e tshehla mobu o putswa | P15 | 7 ho lelekisa mebala | P26 | Green Cyan e phaphamala |
| P05 | Lebelo la lipere tsa Cyan fatše | P16 | Meteor e putsoa | P27 | Blue Purple float |
| P06 | Peiso ea pere e pherese fatše | P17 | Meteor e pherese | P28 | Blue White float |
| P07 | Mebala e 7 ea lebelo la lipere tse ngata | P18 | Meteor e tšoeu | P29 | 6 mebala e phaphametseng |
| P08 | 7 peiso ea lipere tsa mebala e koala + butle | P19 | 7 mebala ea meteor | P30 | 6 mebala e boreleli karolong e itseng |
| P09 | Mebala e 7 ea lebelo la lipere tse ngata haufi + e bulehileng | P20 | Phala e khubelu | P31 | 7 tlola ka mebala ka karolo |
| P10 | 7 ea ho hlahloba mebala e koala + butle | P21 | Papali e tala | P32 | 7 color strobe sectionally |
| P11 | 7 mebala e mengata ea ho skena e koala + butle | P22 | Blue float |
Mokhoa oa RF
Match: Tobetsa nako e telele M le ▶ key bakeng sa 2s, hlahisa "RLS", ka hare ho 5s, tobetsa konopo ea on/off ea remote ea RGB, bonts'a "RLO", papali e atlehile, ebe sebelisa RF remote ho fetola nomoro ea mode, fetola lebelo. kapa kganya. Hlakola: Tobetsa nako e telele M le ▶ konopo bakeng sa 5s, ho fihlela ho hlahisa "RLE", hlakola li-remote tsohle tsa RF tse tsamaellanang.
Khutlisa paramethara ea kamehla ea feme
- Tobetsa nako e telele ◀ le konopo ea ▶, khutlisetsa parameter ea kamehla ea feme, bonts'a"RES".
- Factory default parameter: DMX decode mode, DMX decode start address ke 1, decode number ke 510, multiple of pixels 1, dynamic mode number ke 1, chip type ke TM1809, RGB order, pixel bolelele ke 170, tima skrine e se nang letho e ikemetseng, ntle le e tsamaisanang le RF e hole
Litokomane / Lisebelisoa
 |
SKYDANCE DSA DMX512-SPI Decoder le RF Controller [pdf] Bukana ea Mosebelisi DSA, DMX512-SPI Decoder le RF Controller, Decoder le RF Controller, RF Controller, DMX512-SPI Decoder, DSA, Decoder |
