nVent HOFFMAN F44WPFG Ngonversi Plate Penutupan Kanggo Reducer

Informasi produk

Produk sing diterangake ing manual pangguna yaiku piring tutup sing bisa diowahi dadi pengurangan. Reducer digunakake bebarengan karo flange wireway 4 × 4, gasket 4 × 4, flange wireway 6 × 6, lan gasket 6 × 6.

Plat penutupan kudu diowahi kanthi nambahake potongan tengah lan papat bolongan countersunk kaya sing ditampilake ing Gambar 1. Reducer, 4 × 4 gasket, lan 4 × 4 wireway flange kudu disambungake bebarengan minangka ditampilake ing Gambar 2. Tambahan, 6 × 6 wireway flange lan 6 × 6 gasket kudu disambungake menyang reducer kaya sing ditampilake ing Gambar 2.

Pandhuan Panggunaan Produk

1. Njupuk piring penutupan lan tambahake potongan tengah lan papat bolongan countersunk miturut dimensi sing ditampilake ing Gambar 1.
2. Njupuk reducer lan selarasake karo flange wireway 4 × 4. Pasang gasket 4 × 4 antarane reducer lan flange.
3. Pasang flange wireway 6 × 6 menyang ujung liyane saka reducer.
4. Selehake gasket 6 × 6 antarane flange wireway 6 × 6 lan reducer.
5. Priksa manawa kabeh sambungan aman lan didadekake siji.

Priksa manawa kanggo deleng tokoh kasebut ing pandhuan kanggo perwakilan visual carane komponen kudu disambungake.

Instruksi Majelis

1. Ngowahi piring penutupan kanthi nambahake cutout tengah lan papat bolongan countersunk minangka ditampilake ing Fig.
2. Sambungake reducer lan 4 × 4 gasket kanggo 4 × 4 wireway flange minangka ditampilake ing Fig. 2.
3. Sambungake 6 × 6 wireway flange lan 6 × 6 gasket kanggo reducer minangka ditampilake ing Fig. 2.

© 2018 Hoffman Enclosures Inc.

• PH 763 422 2211
• nVent.com/HOFFMAN
• 87568877
• P/N 99401151

Dokumen / Sumber Daya

nVent HOFFMAN F44WPFG Ngonversi Plate Penutupan Kanggo Reducer [pdf] Pandhuan Tanpa Irah-irahan, F44WPFG, F44WPFG Ngonversi Penutupan Plate menyang Reducer, Ngonversi Penutupan Plate menyang Reducer, Penutupan Plate kanggo Reducer, Plate kanggo Reducer, Reducer

Referensi

• Manual pangguna