CE Electronics CE3871-0 Powertool Transceiver Modul Instruksi Manual

The module’s operation is automated. Attach it to the tool, power it on, and it will establish communication with the tool.
It will attempt to wirelessly connect to the previous controller; if not found, it will scan through available channels to find a new controller.

CE3871-0 & CE3871-1 Instruksi Operasi

Majelis

The designated cable in the tool should be plugged into the J1 connector.

The J2 connector is used for development and should be left unconnected by the user.
The module must be mounted at least 5mm from the outside edge of the product.

Operasi

Module operation is entirely automated.

Once attached to the tool and powered on, the module will automatically begin communication with the tool and attempt to connect wirelessly to the previous controller.
If the previous controller cannot be found at power-up, the module will automatically scan through the available channels to find a new controller.

Frekuensi saluran

Saluran	Frekuensi (GHz)
1	2.410
2	2.415
3	2.420
4	2.425
5	2.430
6	2.435
7	2.440
8	2.445
9	2.450
10	2.455
11	2.460
12	2.465

PERNYATAAN FCC

Informasi Regulasi
Amerika Serikat (FCC)
CE3871 Modules comply with Part 15 of the FCC rules and regulations. Compliance with the labeling requirements, FCC notices and antenna usage guidelines is required.
Kanggo ngrampungake Sertifikasi FCC, OEM kudu tundhuk karo peraturan ing ngisor iki:

Integrator sistem kudu mesthekake yen teks ing label eksternal sing diwenehake karo piranti iki diselehake ing njaba produk pungkasan.

syarat label OEM
WARNING! Minangka Produsen Peralatan Asli (OEM) sampeyan kudu mesthekake yen syarat label FCC wis dipenuhi. Sampeyan kudu nyakup label sing katon jelas ing njaba lampiran produk pungkasan sing nuduhake konten ing ngisor iki:
Ngemot ID FCC: O4O-CE3871
Piranti iki tundhuk karo Part 15 saka Aturan FCC. Operasi tundhuk karo rong syarat ing ngisor iki:

Piranti iki bisa uga ora nimbulaké gangguan mbebayani lan

Piranti iki kudu nampa gangguan sing ditampa, kalebu gangguan sing bisa nyebabake operasi sing ora dikarepake.

kabar FCC
PENTING: CE3871 Modules have been certified by the FCC for use with other products without any further certification (as per FCC section 2.1091). Modifications not expressly approved by C.E. Electronics could void the user’s authority to operate the equipment.
PENTING: OEMs must test the final product to comply with unintentional radiators (FCC section 15.107 & 15.109) before declaring compliance of their final product to Part 15 of the FCC Rules.
PENTING: The module has been certified for remote, base, and portable radio applications. If the module will be used for portable applications, the device must have a minimum of 5mm separation from the operator.
Peralatan iki wis diuji lan ditemokake tundhuk karo watesan kanggo piranti digital Kelas B, miturut Part 15 Aturan FCC. Watesan kasebut dirancang kanggo menehi pangayoman sing cukup marang gangguan sing mbebayani ing instalasi omah. Peralatan iki ngasilake, nggunakake lan bisa mancarake energi frekuensi radio lan, yen ora dipasang lan digunakake miturut pandhuane, bisa nyebabake gangguan sing mbebayani kanggo komunikasi radio. Nanging, ora ana jaminan manawa gangguan ora bakal kedadeyan ing instalasi tartamtu.
Yen peralatan iki nyebabake gangguan sing mbebayani kanggo panrima radio utawa televisi, sing bisa ditemtokake kanthi mateni lan nguripake peralatan kasebut, pangguna dianjurake kanggo nyoba mbenerake gangguan kasebut kanthi siji utawa luwih saka langkah-langkah ing ngisor iki: Re-orient utawa mindhah antena nampa, Tambah misahake antarane peralatan lan panrima, Sambungake peralatan lan panrima kanggo stopkontak ing sirkuit beda, utawa Konsultasi bakul utawa radio experienced / teknisi TV kanggo bantuan.

ISED (Innovation, Science and Economic Development Canada)
Piranti iki ngemot pemancar/panrima sing ora duwe lisensi sing tundhuk karo RSS sing dibebasake lisensi Inovasi, Ilmu Pengetahuan lan Ekonomi Kanada. Operasi tundhuk karo rong syarat ing ngisor iki:

Piranti iki bisa uga ora nyebabake gangguan.

Piranti iki kudu nampa gangguan apa wae, kalebu gangguan sing bisa nyebabake operasi piranti sing ora dikarepake.

Persyaratan Labeling

Labeling requirements for Industry Canada are similar to those of the FCC. A clearly visible label on the outside of the final product enclosure must display the following text:
Ngandhut Model Powertool Transceiver Modul CE3871, IC: 8507A-CE3871

The integrator is responsible for its product to comply with IC ICES-003 & FCC Part 15, Sub. B – Unintentional Radiators. ICES-003 is the same as FCC Part 15 Sub. B and Industry Canada accept FCC test report or CISPR 22 test report for compliance with ICES-003.
Modifikasi sing ora disetujoni kanthi jelas dening CE Electronics bisa ngilangi wewenang pangguna kanggo ngoperasikake peralatan kasebut.

Firmware Version Identification number (FVIN)

CE3871 firmware versions are 5.x or 6.x. FVIN is displayed on the controller with which the module is communicating.

KONTAK

CE Electronics, Inc.
2107. Jalan Industri
Bryan, OH 43506
Telpon: 419-636-6705
Fax: 419-636-2516

FAQ

P: Kepiye carane ngerti yen modul disambungake menyang pengontrol?

A: The module will automatically establish a connection with the controller when powered on. You can check for successful connection indicators on the tool or controller interface.

P: Apa aku bisa nggunakake konektor J2 kanggo maksud apa wae?

A: The J2 connector is intended for development purposes only and should not be connected during normal operation to avoid interference with the module's functionality.

Dokumen / Sumber Daya

CE Electronics CE3871-0 Powertool Transceiver Modul [pdf] Instruksi Manual
CE3871-0, CE3871-1, CE3871-0 Modul Transceiver Powertool, CE3871-0, Modul Transceiver Powertool, Modul Transceiver, Modul

Referensi

Manual pangguna

C E Electronics CE3871-0 Powertool Transceiver Module

Spesifikasi

Pandhuan Panggunaan Produk