C E Electronics CE3871-0 Powertool Transceiver Module
Litlhaloso
- Product Name: Powertool Transceiver Module CE3871
- Manufacturer: C.E. Electronics, Inc.
- Mohlala: CE3871
- IC: 8507A-CE3871
- Maqhubu a Marang-rang: 2.410 GHz - 2.465 GHz
Litaelo tsa Tšebeliso ea Sehlahisoa
- The designated cable in the tool should be plugged into the J1 connector.
- The J2 connector is for development purposes and should remain unconnected.
- Mount the module at least 5mm from the outside edge of the product.
- The module’s operation is automated. Attach it to the tool, power it on, and it will establish communication with the tool.
- It will attempt to wirelessly connect to the previous controller; if not found, it will scan through available channels to find a new controller.
CE3871-0 & CE3871-1 Operation Instructions
Kopano
- The designated cable in the tool should be plugged into the J1 connector.
- The J2 connector is used for development and should be left unconnected by the user.
- The module must be mounted at least 5mm from the outside edge of the product.
Tshebetso
- Module operation is entirely automated.
- Once attached to the tool and powered on, the module will automatically begin communication with the tool and attempt to connect wirelessly to the previous controller.
- If the previous controller cannot be found at power-up, the module will automatically scan through the available channels to find a new controller.
Maqhubu a Channel
| Channel | Maqhubu (GHz) |
| 1 | 2.410 |
| 2 | 2.415 |
| 3 | 2.420 |
| 4 | 2.425 |
| 5 | 2.430 |
| 6 | 2.435 |
| 7 | 2.440 |
| 8 | 2.445 |
| 9 | 2.450 |
| 10 | 2.455 |
| 11 | 2.460 |
| 12 | 2.465 |
TLHOKOMELO FCC
Boitsebiso ba Taolo
United States (FCC)
CE3871 Modules comply with Part 15 of the FCC rules and regulations. Compliance with the labeling requirements, FCC notices and antenna usage guidelines is required.
Ho phethahatsa Setifikeiti sa FCC, OEM e tlameha ho latela melaoana e latelang:
- Mohokahanyi oa sistimi o tlameha ho etsa bonnete ba hore mongolo o leiboleng ea kantle e fanoeng ka sesebelisoa sena o behiloe kantle ho sehlahisoa sa ho qetela.
Litlhoko tsa ho ngola li-OEM
TEMOSO! Joaloka Moetsi oa Thepa ea Pele (OEM) u tlameha ho etsa bonnete ba hore litlhoko tsa ho ngolla tsa FCC lia fihlelleha. U tlameha ho kenyelletsa leibole e bonahalang ka ho hlaka ka ntle ho sebaka sa ho qetela sa sehlahisoa se bontšang litaba tse latelang:
Contains FCC ID: O4O-CE3871
Sesebelisoa sena se lumellana le Karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:
- Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi le
- Sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.
Litsebiso tsa FCC
BOHLOKOA: CE3871 Modules have been certified by the FCC for use with other products without any further certification (as per FCC section 2.1091). Modifications not expressly approved by C.E. Electronics could void the user’s authority to operate the equipment.
BOHLOKOA: OEMs must test the final product to comply with unintentional radiators (FCC section 15.107 & 15.109) before declaring compliance of their final product to Part 15 of the FCC Rules.
BOHLOKOA: The module has been certified for remote, base, and portable radio applications. If the module will be used for portable applications, the device must have a minimum of 5mm separation from the operator.
Thepa ena e lekiloe 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, ho latela Karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi mohahong oa bolulo. Thepa ena e hlahisa, e sebelisa le ho khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala setsing se itseng.
Haeba sesebelisoa sena se baka tšitiso e kotsi ho kamohelo ea seea-le-moea kapa ea thelevishene, e ka lekanyetsoang ka ho tima le ho tima sesebelisoa, mosebelisi o khothalletsoa ho leka ho lokisa tšitiso ka e 'ngoe kapa tse ling tsa mehato e latelang: Ho tsamaisa kapa ho suthisetsa sebakeng se seng. ho amohela lenakana, Eketsa karohano pakeng tsa thepa le moamoheli, Hokela thepa le moamoheli mabenkeleng a li-circuits tse fapaneng, kapa Buisana le morekisi kapa setsebi se nang le boiphihlelo ba seea-le-moea/TV bakeng sa thuso.
ISED (Boqapi, Saense le Ntlafatso ea Moruo Canada)
Sesebelisoa sena se na le li-transmitter/baamoheli ba sa lumelloeng ke laesense ba tsamaellanang le RSS(li)laesense tse sa tsoeng ka Li-RSS. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:
- Sesebelisoa sena se kanna sa se ke sa baka tšitiso.
- Sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng ea sesebelisoa.
Litlhoko tsa ho ngola
- Labeling requirements for Industry Canada are similar to those of the FCC. A clearly visible label on the outside of the final product enclosure must display the following text:
- Contains Model Powertool Transceiver Module CE3871, IC: 8507A-CE3871
- The integrator is responsible for its product to comply with IC ICES-003 & FCC Part 15, Sub. B – Unintentional Radiators. ICES-003 is the same as FCC Part 15 Sub. B and Industry Canada accept FCC test report or CISPR 22 test report for compliance with ICES-003.
- Modifications not expressly approved by C.E. Electronics could void the user’s authority to operate the equipment.
Firmware Version Identification number (FVIN)
- CE3871 firmware versions are 5.x or 6.x. FVIN is displayed on the controller with which the module is communicating.
TS'ELISO
- C.E. Electronics, Inc.
- 2107 Industrial Drive
- Bryan, OH 43506
- Mohala: 419-636-6705
- Fax: 419-636-2516
LBH
Q: How do I know if the module is connected to a controller?
A: The module will automatically establish a connection with the controller when powered on. You can check for successful connection indicators on the tool or controller interface.
Q: Can I use the J2 connector for any purpose?
A: The J2 connector is intended for development purposes only and should not be connected during normal operation to avoid interference with the module's functionality.
Litokomane / Lisebelisoa
 |
C E Electronics CE3871-0 Powertool Transceiver Module [pdf] Buka ea Taelo CE3871-0, CE3871-1, CE3871-0 Powertool Transceiver Module, CE3871-0, Powertool Transceiver Module, Transceiver Module, Module |