EZIOKWU PWM-200 Series 200W Constant Voltage PWM Mmepụta LED Akwụkwọ ntuziaka onye nwe

Nwụnye:
Gbaa mbọ hụ na ntinye voltage nọ n'ime oke akọwapụtara maka ụdị ị na-eji.
Jikọọ onye ọkwọ ụgbọ ala LED dịka eserese wiring nyere na ntuziaka.

Na-ebelata
Gbanwee oke nhụsianya dị ka achọrọ site na iji ugboro PWM akọwapụtara maka ụdị gị.

Na-agbanye ike
Tinye ike na onye ọkwọ ụgbọ ala LED wee hụ na ọ kwụsiri ike n'ime oge njide a kpọtụrụ aha na nkọwapụta.

Nchọpụta nsogbu
Rụtụ aka na ntuziaka onye ọrụ maka usoro nchọpụta nsogbu ma ọ bụrụ na nsogbu ọ bụla nwere onye ọkwọ ụgbọ ala LED.

Ajụjụ A na-ajụkarị (FAQ)

Q: Gịnị bụ dimming nso maka PWM-200 usoro LED ọkwọ ụgbọala?
A: The dimming nso si 0% ka 100% niile ụdị na PWM-200 usoro.

Atụmatụ

Voltage PWM ụdị mmepụta nwere ugboro ruo 4kHz imewe kwekọrọ IEEEI 789-2015 (ụdị oghere)

Ụlọ plastik nwere klaasị 11 na imewe PFC
Ngwa ọkụ mberede dị ka IEC61347-2-13 si dị

Oriri ike njikere
Ejiri ọkwa IP67 kpuchie ya nke ọma

Nhọrọ ọrụ: 3 n'ime 1 dimming (dim-to-off and kewapụrụ Design)/DALL-2
Ọkwa mbelata kacha nta 0.2% maka ụdị DA2

Oge ndụ nkịtị> 50000 awa na akwụkwọ ikike afọ 5

Ngwa

Igwe ọkụ warara LED

Ọkụ ọkụ ime ụlọ
Ọkụ eji achọ mma LED

LED architecture ọkụ
Ọkụ ọkụ

Igwe ọkụ ụlọ ọrụ
Pịnye “HL” maka ojiji na klaasị l, nkewa 2 dị ize ndụ (nkewa).

Koodu GTIN
Ọchụchọ MW: http://www.meanwell.com/serviceGTlN.aspx

Nkọwa

Usoro PWM-200 bụ onye ọkwọ ụgbọ ala 200W AC / DC na-egosipụta voltaji mgbe niiletage mode na PWM ụdị mmepụta, nke na-enwe ike ịnọgide na-enwe agba okpomọkụ na nchapụta homogeneity mgbe ị na-anya ụdị ọ bụla nke LED ibe. PWM-200 na-arụ ọrụ site na 100-305VAC ma na-enye ụdị nwere ọkwa dị iche ichetage sitere na 12V na 48V. Ekele maka arụmọrụ dị elu ruo 94% site na imepụta enweghị fan, usoro ahụ dum nwere ike ịrụ ọrụ maka -400C + 850C ọnọdụ okpomọkụ n'okpuru ikuku ikuku n'efu. A na-eji usoro nchebe IP67 dị elu mee ihe na usoro ahụ dum ma dị mma iji rụọ ọrụ maka nkụ, damp ma ọ bụ ebe mmiri. PWM-200 nwere ọrụ dimming nke na-agbanwe usoro ọrụ nke mmepụta, na-enye nnukwu mgbanwe maka ngwa ibe ọkụ LED.

Ihe ntinye ihe nlere

Nkọwapụta

Ụdị				PWM-200-12	PWM-200-24	PWM-200-36	PWM-200-48
Mpụta		DC VOLTAGE		12V	24V	36V	48V
		EKWERE UGBUA		15A	8.3A	5.55A	4.17A
		EGO IKE		180W	199.2W	199.8W	200.1W
		ỤTỌ DIMMING		0 ~ 100%
		Ugboro ugboro PWM (Ụdị)		4kHz maka ụdị oghere; 2.5kHz maka ụdị DA2
		NTKWU, NA-ebili oge ^{Rịba ama. 2}Rịba ama. 10		500ms, 80ms/230VAC ma ọ bụ 115VAC
		Jide OGE OGE (Ụdị)		10ms / 230VAC ma ọ bụ 115VAC
Ntinye		VOLTAGE nso Rịba ama.3		100 ~ 305VAC 142 ~ 431VDC(Biko rụtụ aka na ngalaba "SATIC CHARACTERISTIC")
		Ugboro ugboro		47 ~ 63Hz
		IHE MGBE IKE (Ụdị)		PF> 0.97/115VAC, PF>0.96/230VAC, PF>0.94/277VAC @ zuru ibu(Biko rụtụ aka na ngalaba "Power FACTOR (PF) CharacTERISTIC" ngalaba)
		Mkpokọta ỌR .A NKWUKWU		THD <20%(@load≧60%/115VAC, 230VAC; @load≧75%/277VAC)(Biko rụtụ aka na ngalaba "NKWUKWU HARMONIC DISTORTION")
		OKWU (Ụdị)		92%	93%	94%	94%
		AC ugbu a (Ụdị)		2.2A / 115VAC 1.1A / 230VAC 0.9A / 277VAC
		INRUSH Ugbu a (pdị.)		COLD START 65A(twidth=55μ0 s measured at 50% Ipeak) at 230VAC; Maka NEMA 410
		MAX. Mba. nke PSU na 16A CIRCUIT BREAKER		Nkeji 3 (onye na-emebi okirikiri nke ụdị B) / nkeji 5 (onye na-emebi okirikiri nke ụdị C) na 230VAC
		NKWUKWU UGBUA		<0.75mA / 277VAC
		Iguzosi Ike NKE oriri		oriri ike njikere <0.5W mgbe ọ na-ebelata
Nchedo		bufee		108 ~ 135% gosiri ike mmepụta
				Ọnọdụ Hiccup ma ọ bụ mmachi na-adị ugbu a, na-agbake na-akpaghị aka ka ewepụchara ọnọdụ mmejọ
		Obere oge		Mechie o/p voltage, nwetaghachi ike iji nwetaghachi (ma e wezụga maka ụdị DA2) Ọnọdụ mgbake, na-agbake na-akpaghị aka mgbe ewepụsịrị ọnọdụ mmejọ (naanị maka ụdị DA2)
		N'elu VOLTAGE		13 ~ 18V	27 ~ 34V	41 ~ 49V	53 ~ 65V
				Mechie o/p voltage, weghachite ike iji gbakee mgbe ewepụrụ ọnọdụ mmejọ
		GARA Okpomọkụ		Mechie o/p voltage, weghachite ike iji gbakee mgbe ewepụrụ ọnọdụ mmejọ
Gburugburu Ebe Obibi		ỌRỤ NA-arụ ọrụ.		Tcase = -40 ~ +85 ℃ (Biko rụtụ aka na ngalaba "OUTPUT LOAD vs TEMPERATURE")
		MAX. IGBU OZI.		Akpa =+85 ℃
		Iru mmiri na-arụ ọrụ		20 ~ 95% RH na-abụghị condensing
		Nchekwa TEMP., IHU URU		-40 ~ +80 ℃, 10 ~ 95% RH
		TEMP. EGO		0.03%/℃ (0 ~ 50 ℃)
		VIBRATION		10 ~ 500Hz, 5G 12min./1 okirikiri, oge maka 72min. nke ọ bụla tinyere X, Y, Z axe
Nchekwa & EMC		Ọkọlọtọ nchekwa Rịba ama. 5		UL8750 (ụdị "HL"), CSA C22.2 Nke 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13,BS EN/EN62384independent,IP67,EAC TP TC 004,GB19510.1,GB19510.14, IS15885(Part2/VEC13) akwadoro maka 36); Nhazi na-ezo aka na BS EN/EN60335-1, dị ka BS EN/EN61347-2-13 appendix J dabara maka nrụnye mberede.
		Ụkpụrụ DALI		Soro IEC62386-101, 102 maka naanị ụdị DA207, ụdị ngwaọrụ 251(DT2)
		NA -ECHE VOLTAGE		I/PO/P: 3.75KVAC; I/P-DA: 1.5KVAC; O/P-DA:1.5KVAC
		Nguzogide dịpụrụ adịpụ		I/PO/P: 100M Ohms / 500VDC / 25℃/ 70% RH
		EMC EMISỌ Rịba ama. 6		Nkwenye na BS EN/EN55015, BS EN/EN61000-3-2 Klas C (@load≧60%); BS EN/EN61000-3-3,GB/T 17743,GB17625.1;EAC TP TC 020
		EMC MGBE		nnabata na BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN / EN 61547, ọkwa ụlọ ọrụ ọkụ (ọgwụ mgbochi, Line-Line 2KV), EAC TP TC 020
Ndị ọzọ		MTBF		2235.6K elekere nkeji. Telcordia SR-332 (Bellcore) ; 178.7K elekere nkeji. MIL-HDBK-217F (25 ℃)
		Akụkụ		1956839.5mm (LWH)
		Mbukota		1.03 n'arọ; 12pcs / 13.4Kg/ 0.71CUFT
IHE		A na-atụle parampat niile akọwaghị aha ya na ntinye 230VAC, akara ugbu a yana 25 ℃ nke ọnọdụ okpomọkụ. A na-atụ ogologo oge nhazi na mmalite oyi mbụ. Ịgbanye/ Gbanyụọ onye ọkwọ ụgbọ ala nwere ike ibute mmụba nke oge akwadoro. Enwere ike ịchọrọ iwepụ ọkwa n'okpuru obere ntinye voltages. Biko rụtụ aka na ngalaba “SATIC CHARACTERISTIC” maka nkọwa. A na-ewere onye ọkwọ ụgbọ ala dị ka akụkụ nke a ga-arụ ọrụ na ngwa ikpeazụ. Ebe ọ bụ na nrụnye zuru ezu ga-emetụta arụmọrụ EMC, ndị na-emepụta akụrụngwa ikpeazụ ga-emezigharị Ntuziaka EMC na nrụnye zuru ezu ọzọ. (dị ka ọ dị na https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf Usoro a na-ezute ogologo ndụ ndụ nke> 50,000 awa ọrụ mgbe Tcase, karịsịa tc point (ma ọ bụ TMP, kwa DLC), bụ ihe dịka 75 ℃ ma ọ bụ obere. Biko rụtụ aka na nkwupụta ikike na MEAN WELL's websaịtị na http://www.meanwell.com The ambient okpomọkụ derating nke 3.5 ℃ / 1000m na fanless ụdị na nke 5℃ / 1000m na fan ụdị maka arụ ọrụ elu karịa 2000m (6500ft). Maka ndetu ngwa ọ bụla yana ịkpachara anya nrụnye ọrụ akaebe mmiri IP, biko rụtụ aka n'akwụkwọ ntuziaka onye ọrụ tupu iji ya. https://www.meanwell.com/Upload/PDF/LED_EN.pdf A naghị atụ aro ka ijikọ na ibu capacitive Dabere na IEC 62386-101 / 102 DALI ike na usoro oge na nkwụsịtụ, oge nhazi ahụ kwesịrị ịnwale ya na onye na-ahụ maka DALI nke nwere ike ịkwado ike DALI na ọrụ, ma ọ bụghị na oge nhazi ga-adị elu karịa 0.5 sekọnd maka ụdị DA2. . Iji mezuo ihe achọrọ nke usoro ErP kachasị ọhụrụ maka ọkụ ọkụ, ọkụ ọkụ ọkụ ọkụ a nwere ike iji naanị n'azụ mgba ọkụ na-enweghị njikọ na-adịgide adịgide na mains. Nkwụghachi ụgwọ ngwaahịa: Maka ozi zuru ezu, biko rụtụ aka https://www.meanwell.com/serviceDisclaimer.aspx
	Arrow.com		File Aha: PWM-200-SPEC 2024-09-09

DIMMING ọrụ

Ụkpụrụ nbelata maka mmepụta ụdị PWM
A na-enweta ntu oyi site n'ịgbanwe usoro ọrụ nke mmepụta ugbu a.

3 n'ime 1 ọrụ dimming (maka oghere-ụdị) ‧

Tinye otu n'ime usoro atọ dị n'etiti DIM+ na DIM-: 0 ~ 10VDC, ma ọ bụ 10V PWM mgbama ma ọ bụ nguzogide.
Na-ebelata isi iyi ugbu a site na ọkọnọ ike: 100μA (ụdị.)

Na-etinye nguzogide mgbakwunye:

Mara:

Min. okirikiri ọrụ nke mmepụta ugbu a bụ ihe dịka 1%, ntinye na-ebelata ihe dị ka 6KΩ ma ọ bụ 0.6VDC, ma ọ bụ 10V PWM mgbama nwere 6% ọrụ okirikiri.
Usoro ọrụ nke mmepụta ugbu a nwere ike ịdaba na 0% mgbe ntinye ntugharị na-erughị 6KΩ ma ọ bụ ihe na-erughị 0.6VDC, ma ọ bụ 10V PWM mgbama nwere ọrụ ọrụ na-erughị 6%

DALI interface PUSH na-ebelata (akụkụ nke mbụ)

Omume	Ogologo oge ihe omume	Ọrụ
Ntụtu dị mkpirikpi	0.1 ~ 1 nkeji.	Gbanyụọ onye ọkwọ ụgbọ ala
Ogologo ogologo	1.5 ~ 10 nkeji.	Ogologo Push ọ bụla na-agbanwe ntụzịaka mbelata, na-akụda elu ma ọ bụ ala
Tọgharia	>11 nkeji.	Tọọ ọkwa nhụsianya ka ọ bụrụ 100%

The factory ndabara ndabara larịị larịị bụ na 100%.
Ọ bụrụ na ntinye ihe na-erughị 0.05 sec., ọ gaghị eduga na mgbanwe maka ọnọdụ nke ọkwọ ụgbọala.
Ihe ruru ndị ọkwọ ụgbọ ala 10 nwere ike ịrụ PUSH dimming n'otu oge mgbe ị na-eji otu bọtịnụ ntinye nkịtị.
Ogologo kachasị ogologo nke eriri site na bọtịnụ ntinye na onye ọkwọ ụgbọ ala ikpeazụ bụ mita 20.
Enwere ike ijikọ bọtịnụ ntinye mgbakwunye naanị n'etiti ọdụ DA +, dị ka egosipụtara na eserese ahụ, yana AC / L (na agba aja aja ma ọ bụ oji); ọ ga-eduga na sekit dị mkpirikpi ma ọ bụrụ na ejikọtara ya na AC / N.

Interface DALI (maka DA2-ụdị)

Tinye akara ngosi DALI n'etiti DA+ na DA-.
DALI protocol nwere otu iri na isii na adreesị 16.
Oge nkeji ọrụ nke mmepụta ugbu a bụ ihe dịka 0.2%

ỌKWU Mpụta vs OMUME

AKWỤKWỌ AKWỤKWỌ MMADỤ IKE (PF).

Mkpokọta mgbasa ozi ọjọọ (THD)

Ịrụ ọrụ vs ibu
Usoro PWM-200 nwere arụmọrụ ọrụ dị elu nke nwere ike iru 94% na ngwa ubi.

48V Model, Tcase na 75 ℃

OGE NDỤ

Ihe Ngosi

Nkọwapụta igwe

Na -akwado ntụnye ntụnye

Akwụkwọ ntuziaka nwụnye

Njikọ maka ụdị oghere na ụdị DA2

Ịdọ aka ná ntị

Tupu ịmalite nrụnye ma ọ bụ ọrụ mmezi ọ bụla, biko kwụpụ ọkụ eletrik na akụrụngwa. Gbaa mbọ hụ na enweghị ike ijikọ ya ọzọ n'amaghị ama!
Debe ikuku ikuku kwesịrị ekwesị gburugburu unit ahụ ma atụbakwala ihe ọ bụla na ya. Ọzọkwa, a ga-edobe mkpochapụ 10-15 cm mgbe ngwaọrụ dị n'akụkụ bụ isi iyi ọkụ.
Ntụnye mgbago na-abụghị nhazi ọkọlọtọ ma ọ bụ na-arụ ọrụ n'okpuru ọnọdụ okpomọkụ dị elu nwere ike ịbawanye okpomoku akụrụngwa nke dị n'ime ma ga-achọkwa de-rating na mmepụta ugbu a.

Ogo dị ugbu a nke eriri isi/secondary akwadoro kwesịrị ịdị ukwuu karịa ma ọ bụ ha nhata na nke unit ahụ. Biko rụtụ aka na nkọwapụta ya.
Maka ndị ọkwọ ụgbọ ala LED nwere njikọ mmiri na-adịghị, chọpụta na njikọ dị n'etiti unit na ihe ọkụ ọkụ na-esi ike ka mmiri ghara ịbanye n'ime usoro ahụ.
N'ihi na dimmable LED ọkwọ ụgbọala, jide n'aka na gị dimming njikwa bụ ike ịkwọ ụgbọala ndị a nkeji.PWM usoro chọrọ 0.15mA ọ bụla unit.

Tc max. achọpụtara na akara ngwaahịa. Biko hụ na okpomọkụ nke Tc point agaghị agafe oke.
Kwesịrị ekwesị maka ojiji ime ụlọ ma ọ bụ n'èzí na-enweghị ìhè anyanwụ kpọmkwem. Biko zere imikpu n'ime mmiri ihe karịrị nkeji iri atọ.
A na-ewere ọkụ ọkụ ahụ dị ka akụkụ nke a ga-arụ ọrụ na ngwongwo ikpeazụ. Ebe ọ bụ na nrụnye zuru ezu ga-emetụta arụmọrụ EMC, ndị na-emepụta akụrụngwa ikpeazụ ga-emezigharị Ntuziaka EMC na nrụnye zuru ezu ọzọ.

Akwụkwọ / akụrụngwa

EZIOKWU PWM-200 Series 200W Constant Voltagna PWM Output LED Driver [pdf] Akwụkwọ ntuziaka onye nwe
PWM-200 Series 200W Constant Voltage PWM Mmepụta Ọkwọ ụgbọ ala, PWM-200 Series, 200W Constant Voltage PWM Mmepụta LED ọkwọ ụgbọ ala, Voltage PWM Output LED Driver, PWM Output LED Driver, Output LED Driver, Driver

Ntụaka

Akwụkwọ ntuziaka onye ọrụ

EZIOKWU PWM-200 Series 200W Constant Voltagna PWM Output LED Driver

Ntuziaka ojiji ngwaahịa