Hiwonder Arduino Tọọ ntuziaka nwụnye mmepe gburugburu

Tọọ mmepe gburugburu1. Ntinye ngwa ngwa Arduino

Arduino IDE bụ sọftụwia emebere maka Arduino microcontroller nwere ọrụ dị ike. N'agbanyeghị ụdị nsụgharị, usoro nhazi ahụ bụ otu.

1. Nkebi nke a na-ewe Arduino-1.8.12 windows version dị ka example. 1) Tinye onye ọrụ Arduino websaịtị iji budata:
   https://www.arduino.cc/en/Main/OldSoftwareReleases#1.0.x
   
2. Mgbe nbudata, pịa ugboro abụọ "arduino-1.8.12-windows.exe".
   
3. Pịa "Ekwenyere m" ka ịwụnye.
   
4. ) Họrọ niile ndabara nhọrọ, wee pịa "Ọzọ" na-abịa nzọụkwụ ọzọ
   
5. Pịa "Nchọgharị" ka ịhọrọ ụzọ nwụnye, wee pịa "Wụnye"
   
6. Chere ka emechaa nwụnye
   
7. Ọ bụrụ na etinyere onye ọkwọ ụgbọ ala mgbawa, pịa “Wụnye”
   
8. Mgbe echichi mechara, pịa "Mechie".
   

2. Nkọwapụta ngwanrọ

1. Mgbe ịmepechara ngwanrọ ahụ, interface ụlọ nke Arduino IDE bụ nke a:
   
2. Pịa "File/ Mmasị” ka ịtọọ sketchback nke ọrụ IDE, nha font, akara akara ngosi dị ka mmasị gị si dị na windo mmapụta.
   
3. A na-ekewa ebe obibi nke Arduino IDE ụzọ ise, whicharetool bar, project TAB, serial port monitor, code edit area, debug prompt area.
   Nkesa bụ nke a:
   
4. Ogwe ngwá ọrụ nwere ụfọdụ igodo mkpirisi maka ọrụ ndị a na-ejikarị eme ihe, dịka tebụl na-esonụ:
   

2. Ụlọ akwụkwọ File Ụzọ mbubata

1. Were ọba akwụkwọ "U8g2" nke ihe ngosi OLED chọrọ dị ka example. Ụzọ mbubata bụ nke a:
   Pịa ugboro abụọ ka imepe Arduino IDE.
2. Pịa “Sketch” na mmanya menu, wee pịa “Tinye ọba akwụkwọ” -> “Tinye .ZIPLibrary…”
   
3. Chọta U8g2.zip na dialog, wee pịa "Mepee".
   
4. Laghachi na interface ụlọ IDE. Mgbe ngwa ngwa “Ọbá akwụkwọ agbakwunyere na ọba akwụkwọ gị. Lelee menu "gụnye ọba akwụkwọ" pụtara, ọ pụtara na etinyela ọba akwụkwọ nke ọma.
   
5. ) Mgbe agbakwunyere, ọrụ na-esonụ adịghị mkpa ịgbakwunye ugboro ugboro

4. Nchịkọta na bulite Mmemme1)

1. Jiri eriri USB jikọọ bọọdụ mmepe UNO na kọmpụta, wee gosi nọmba ọdụ ụgbọ mmiri kwekọrọ nke bọọdụ mmepe UNO. Right
   Pịa "Kọmputa a" wee pịa "Properties-> Device Manger"
   
2. Pịa Arduino IDE ugboro abụọ.
3. Dee mmemme na mpaghara oghere, ma ọ bụ mepee mmemmefile ya na suffix .ino. N'ebe a, anyị na-emeghe ngwa ngwa na usoro .ino dị ka exampletoillustrate
   Ọ bụrụ na ị na-apụghị ịhụ .ino ndọtị aha na suffix nke file, ị nwere ike pịa "View->File
   Mgbakwunye aha" na "Kọmputa a".
   
4. Mgbe ahụ kwadoro nhọrọ nke osisi mmepe na ọdụ ụgbọ mmiri. (Họrọ
   Arduino/Genuino UNO maka bọọdụ mmepe. Ebe a họrọ COM17port dị ka example. Kọmputa ọ bụla nwere ike ịdị iche na naanị ị ga-ahọrọ ọdụ ụgbọ mmiri kwekọrọ na kọmputa gị. Ọ bụrụ na ọdụ ụgbọ mmiri COM1 pụtara, ọ bụkarị ọdụ ụgbọ mmiri mana ọ bụghị ọdụ ụgbọ mmiri n'ezie.)
   
5. Pịa akara ngosi dị na toolbar iji chịkọta mmemme. Mgbe ahụ chere ozugbo "Emela mkpokọta" dị na akuku aka ekpe nke ala iji mechaa nchịkọta ahụ
   
6. Mgbe emechara usoro ndị a dị n'elu, ị nwere ike bulite mmemme n'imeArduino. Pịa "Bulite"( ) . Mgbe ngwa ngwa “Emela nbudata” pụtara n'akụkụ aka ekpe nke ala, ọ pụtara na ebulitela ya.
   Mgbe ebudatara mmemme ahụ nke ọma, Arduino ga-eme mmemme ebudatara na-akpaghị aka (Ihe mmemme ahụ ga-amalitegharị mgbe ejikọtara ike ma ọ bụ mgbawa na-enweta iwu “tọgharịa”).
   

Gụkwuo maka akwụkwọ ntuziaka a wee budata PDF:

Akwụkwọ / akụrụngwa

Hiwonder Arduino tọọ mmepe gburugburu [pdf] Ntuziaka nwụnye LX 224, LX 224HV, LX 16A, Arduino Set Environment Development, Arduino, Arduino Environment Development, Tọọ mmepe gburugburu ebe obibi, mmepe gburugburu.

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ