ESP32MINI1
Akwụkwọ ntuziaka onye ọrụ
Nke mbu v0.1
Ụlọ ọrụ Espressif Systems
Nwebiisinka © 2021
Banyere akwụkwọ ntuziaka a
Akwụkwọ ntuziaka onye ọrụ na-egosi otu esi ebido na modul ESP32-MINI-1.
Mmelite akwụkwọ
Biko na-ezo aka na ụdị kachasị ọhụrụ mgbe niile https://www.espressif.com/en/support/download/documents.
Akụkọ ngbanwe
Maka akụkọ ngbanwe nke akwụkwọ a, biko rụtụ aka na ibe ikpeazụ.
Mgbanwe akwụkwọ ozi
Espressif na-enye ọkwa email iji mee ka ndị ahịa na-emelite mgbanwe na akwụkwọ teknụzụ. Biko denye aha na www.espressif.com/en/subscribe.
Asambodo
Budata asambodo maka ngwaahịa Espressif site na www.espressif.com/en/certificates.
gafereview
1.1 Modul gafereview
LE MCU modul nke nwere ọtụtụ akụkụ akụkụ. Modul a bụ nhọrọ dị mma maka ọtụtụ ngwa IoT dị iche iche, sitere na akpaaka ụlọ, ụlọ mara mma, ngwa eletrọnịkị ndị ahịa na njikwa ụlọ ọrụ, ọkachasị dabara maka ngwa n'ime oghere kọmpat, dị ka bulbs, switches, na sọket. ESP32-MINI-1 bụ Wi-Fi+Bluetooth ®+Bluetooth ® nke agbakwunyere nke ukwuu, nke pere mpe, modul a na-abịa na ụdị abụọ:
- Ụdị 85 Celsius
- Ụdị 105 Celsius
Tebụl 1. Nkọwa ESP1MINI32
| Otu | Ihe | Nkọwapụta |
|
Wi-Fi |
Protocol | 802.11 b/g/n (802.11n ruo 150Mbps) |
| A-MPDU na A-MSDU mkpokọta na 0.4 µnkwado etiti oge nche | ||
| Oke ugboro | 2412 ~ 2484 MHz | |
|
Bluetooth® |
Protocol | Protocols v4.2 BR/EDR na Bluetooth® Nkọwapụta LE |
| Redio | Klas-1, klaasị-2 na klas-3 nnyefe | |
| AFH | ||
| Audio | CVSD na SBC | |
|
Akụrụngwa |
Modul interfaces |
Kaadị SD, UART, SPI, SDIO, I2C, LED PWM, moto PWM, I2S, infrared remote control, pulse counter, GPIO, touch sensor, ADC, DAC, Two-Wire Automotive Interface (TWAI)TM, dakọtara na ISO11898-1) |
| kristal jikọtara ọnụ | 40 MHz kristal | |
| Ọkụ SPI agbakwunyere | 4 MB | |
| Voltage ọrụtage/Ọkụ ọkụ | 3.0 V ~ 3.6 V | |
| Ugbu a na-arụ ọrụ | Nkezi: 80mA | |
| Opekempe ugbu a na-ebunye site na ọkụ ọkụ | 500 mA | |
| Akwadoro oke okpomọkụ ọrụ | Ụdị 85 °C: -40 °C ~ +85 °C; Ụdị 105 °C: -40 °C ~ +105 °C | |
| Ọkwa mmetụta uche (MSL) | Ọkwa 3 |
1.2 Nkọwa Pin
ESP32-MINI-1 nwere ntụtụ 55. Hụ nkọwa ntụtụ na Tebụl 1-2.
Tebụl 1. Nkọwa Pin
| Aha | Mba. | Ụdị | Ọrụ |
| GND | 1, 2, 27, 38 ~ 55 | P | Ala |
| 3V3 | 3 | P | Ịnye ọkụ |
| I36 | 4 | I | GPIO36, ADC1_CH0, RTC_GPIO0 |
| I37 | 5 | I | GPIO37, ADC1_CH1, RTC_GPIO1 |
| I38 | 6 | I | GPIO38, ADC1_CH2, RTC_GPIO2 |
| I39 | 7 | I | GPIO39, ADC1_CH3, RTC_GPIO3 |
|
EN |
8 |
I |
Elu: na-eme ka mgbawa dị ala: mgbawa na-agbanyụ Mara: ahapụla ntụtụ na-ese n'elu mmiri |
| I34 | 9 | I | GPIO34, ADC1_CH6, RTC_GPIO4 |
| I35 | 10 | I | GPIO35, ADC1_CH7, RTC_GPIO5 |
| IO32 | 11 | I/O | GPIO32, XTAL_32K_P (32.768 kHz kristal oscillator ntinye), ADC1_CH4, TOUCH9, RTC_GPIO9 |
| IO33 | 12 | I/O | GPIO33, XTAL_32K_N (32.768 kHz crystal oscillator mmepụta), ADC1_CH5, TOUCH8, RTC_GPIO8 |
| IO25 | 13 | I/O | GPIO25, DAC_1, ADC2_CH8, RTC_GPIO6, EMAC_RXD0 |
| IO26 | 14 | I/O | GPIO26, DAC_2, ADC2_CH9, RTC_GPIO7, EMAC_RXD1 |
| IO27 | 15 | I/O | GPIO27, ADC2_CH7, TOUCH7, RTC_GPIO17, EMAC_RX_DV |
| IO14 | 16 | I/O | GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, SD_CLK, EMAC_TXD2 |
| IO12 | 17 | I/O | GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3 |
| IO13 | 18 | I/O | GPIO13, ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID, HS2_DATA3, SD_DATA3, EMAC_RX_ER |
| IO15 | 19 | I/O | GPIO15, ADC2_CH3, TOUCH3, RTC_GPIO13, MTDO, HSPICS0, HS2_CMD, SD_CMD, EMAC_RXD3 |
| IO2 | 20 | I/O | GPIO2, ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0,
SD_DATA0 |
| IO0 | 21 | I/O | GPIO0, ADC2_CH1, TOUCH1, RTC_GPIO11, CLK_OUT1, EMAC_TX_CLK |
| IO4 | 22 | I/O | GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER |
| NC | 23 | – | Enweghị njikọ |
| NC | 24 | – | Enweghị njikọ |
| IO9 | 25 | I/O | GPIO9, HS1_DATA2, U1RXD, SD_DATA2 |
| IO10 | 26 | I/O | GPIO10, HS1_DATA3, U1TXD, SD_DATA3 |
| NC | 28 | – | Enweghị njikọ |
| IO5 | 29 | I/O | GPIO5, HS1_DATA6, VSPICS0, EMAC_RX_CLK |
| IO18 | 30 | I/O | GPIO18, HS1_DATA7, VSPICLK |
| IO23 | 31 | I/O | GPIO23, HS1_STROBE, VSPID |
| IO19 | 32 | I/O | GPIO19, VSPIQ, U0CTS, EMAC_TXD0 |
Gaa n'ihu na ibe na-esote
Tebụl 1 – ga-esi na ibe gara aga
| Aha | Mba. | Ụdị | Ọrụ |
| IO22 | 33 | I/O | GPIO22, VSPIWP, U0RTS, EMAC_TXD1 |
| IO21 | 34 | I/O | GPIO21, VSPIHD, EMAC_TX_EN |
| RXD0 | 35 | I/O | GPIO3, U0RXD, CLK_OUT2 |
| TXD0 | 36 | I/O | GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2 |
| NC | 37 | – | Enweghị njikọ |
¹ Pin GPIO6, GPIO7, GPIO8, GPIO11, GPIO16, na GPIO17 na mgbawa ESP32-U4WDH jikọtara ya na flash SPI agbakwunyere na modul ma anaghị ebute ya.
² Maka nhazi ntụtụ n'akụkụ, biko rụtụ aka ESP32 usoro mpempe akwụkwọ.
Bido na ESP32MINI1
2.1 Ihe achọrọ
Iji mepụta ngwa maka modul ESP32-MINI-1 ị ga-achọ:
- 1 x ESP32-MINI-1 modul
- 1 x Espressif RF bọọdụ nnwale
- 1 x USB-na-Serial bọọdụ
- 1 x Micro-USB eriri
- 1 x PC na-arụ ọrụ Linux
Na ntuziaka onye ọrụ a, anyị na-ewere sistemụ arụmọrụ Linux dị ka example. Maka ozi ndị ọzọ gbasara nhazi na Windows na macOS, biko rụtụ aka Ntuziaka mmemme ESP-IDF.
2.2 Njikọ Hardware
- Solder modul ESP32-MINI-1 na bọọdụ nnwale RF dị ka egosiri na eserese 2-1.
- Jikọọ bọọdụ nnwale RF na bọọdụ USB-na-Serial site na TXD, RXD, na GND.
- Jikọọ eriri USB-na-Serial na PC.
- Jikọọ bọọdụ nnwale RF na PC ma ọ bụ ihe nkwụnye ọkụ iji mee ka ọkụ 5 V dị ike, site na eriri Micro-USB.
- Mgbe nbudata, jikọọ IO0 na GND site na jumper. Mgbe ahụ, gbanye “Gbanye” bọọdụ nnwale.
- Budata firmware n'ime flash. Maka nkọwa, lee akụkụ ndị dị n'okpuru.
- Mgbe nbudata, wepụ jumper na IO0 na GND.
- Kwado bọọdụ nnwale RF ọzọ. ESP32-MINI-1 ga-agbanwe gaa na ọnọdụ ọrụ. Ihe mgbawa ga-agụ mmemme site na ọkụ mgbe mmalite.
Mara:
IO0 nwere ezi uche dị n'ime. Ọ bụrụ na edobere IO0 ka ọ dọpụta, ahọpụtara ọnọdụ buut. Ọ bụrụ ntụtụ a dọdara ala ma ọ bụ aka ekpe na-ese n'elu mmiri, ahọpụtara ụdị nbudata ahụ. Maka ozi ndị ọzọ na ESP32-MINI-1, biko rụtụ aka na ESP32-MINI-1 Datasheet.
2.3 Hazie gburugburu mmepe
Espressif IoT Development Framework (ESP-IDF maka mkpụmkpụ) bụ usoro maka mmepe ngwa dabere na Espressif ESP32. Ndị ọrụ nwere ike ịmepụta ngwa na ESP32 na Windows/Linux/macOS dabere na ESP-IDF. N'ebe a, anyị na-ewere sistemụ arụmọrụ Linux dị ka example.
2.3.1 Wụnye ihe achọrọ
Iji chịkọta na ESP-IDF ị ga-enweta ngwugwu ndị a:
- CentOS 7:
sudo yum wụnye git wget flex bison gperf python cmake ninja - wuo ccache dfu-util - Ubuntu na Debian (otu iwu na-agbaji n'ahịrị abụọ):
sudo apt-nweta git wget flex bison gperf python-pip python-setuptools cmake ninja -build-cache libffi -dev libssl -dev dfu-util - Arch:
sudo Pacman -S -- mkpa gcc git mee flex bison gperf python-pip cmake ninja ccache dfu-util
Mara: - Ntuziaka a na-eji ndekọ ~/esp na Linux dị ka nchekwa nwụnye maka ESP-IDF.
- Buru n'uche na ESP-IDF anaghị akwado oghere n'ụzọ.
2.3.2 Nweta ESPDF
Iji wuo ngwa maka modul ESP32-MINI-1, ị ga-achọ ọba akwụkwọ ngwanrọ nke Espressif na-enye. ESP-IDF ebe nchekwa.
Iji nweta ESP-IDF, mepụta ndekọ nrụnye (~/esp) iji budata ESP-IDF wee jiri 'git clone' mechie ebe nchekwa ahụ:
mkdir -p ~/esp
cd ~/ e
git clone --recursive https://github.com/espressif/esp−idf.git
A ga-ebudata ESP-IDF na ~/esp/esp-idf. Kpọtụrụ Ụdị ESP-IDF maka ozi gbasara ụdị ESP-IDF ị ga-eji na ọnọdụ enyere.
2.3.3 Hazie Ngwa
Ewezuga ESP-IDF, ịkwesịrị ịwụnye ngwa ESP-IDF na-eji, dị ka onye na-achịkọta, debugger,
Ihe ngwungwu Python, wdg. ESP-IDF na-enye script aha ya bụ 'install.sh' iji nyere aka melite ngwaọrụ n'otu oge.
cd ~/esp/esp-idf
./ tinye .sh
2.3.4 Hazie mgbanwe gburugburu
Ngwa arụnyere arụnyere adịghị etinye na mgbanwe gburugburu PATH. Iji mee ka ngwa ọrụ dị na ahịrị iwu, a ga-edozi ụfọdụ mgbanwe gburugburu ebe obibi. ESP-IDF na-enye edemede ọzọ 'export.sh' nke na-eme nke ahụ. N'ọnụ ọnụ ebe ị ga-eji ESP-IDF, gbaa ọsọ:
. $HOME/esp/esp-idf/export.sh
Ugbu a ihe niile dị njikere, ị nwere ike wuo gị mbụ oru ngo na ESP32-MINI-1 modul.
2.4 Mepụta ọrụ mbụ gị
2.4.1 Malite oru ngo
Ugbu a ị dịla njikere ịkwado ngwa gị maka modul ESP32-MINI-1. Ị nwere ike ịmalite na ibido/hello_world oru ngo si examples ndekọ na ESP-IDF.
Detuo mmalite/hello_world na ~/esp ndekọ:
cd ~/ e
cp -r $IDF_PATH/ examples/bido-bido/hello_ụwa .
E nwere nso nke example oru ngo na mbụamples ndekọ na ESP-IDF. Ị nwere ike idetuo ọrụ ọ bụla n'otu ụzọ ahụ e gosipụtara n'elu wee mee ya. Ọ dịkwa ike wuo examples na-ebe, na-enweghị iṅomi ha mbụ.
2.4.2 Jikọọ ngwaọrụ gị
Ugbu a jikọọ modul ESP32-MINI-1 gị na kọmpụta wee lelee n'okpuru ọdụ ụgbọ mmiri a na-ahụ anya. Ọdụ ụgbọ mmiri dị na Linux na-amalite na '/ dev/tty' n'aha ha. Gbaa iwu n'okpuru ugboro abụọ, buru ụzọ wepụ bọọdụ ahụ, wee tinye ya. Ọdụ ụgbọ mmiri na-egosi oge nke abụọ bụ nke ịchọrọ:
ls /dev/tty*
Mara:
Debe aha ọdụ ụgbọ mmiri ahụ ka ị ga-achọ ya na usoro ndị ọzọ.
2.4.3 Hazie
Gaa na ndekọ 'hello_world' gị site na Nzọụkwụ 2.4.1. Malite Project, tọọ mgbawa ESP32 ka ebumnuche, wee mee ya
ọrụ nhazi ọrụ 'menuconfig'.
cd ~/esp/hello_world
idf .py set- target esp32
idf .py menuconfig
Ịtọbe ebumnuche ya na 'idf.py set-target esp32' kwesịrị ime otu ugboro, ka imepechara ọrụ ọhụrụ. Ọ bụrụ na ọrụ ahụ nwere ụfọdụ ihe arụrụ arụ na nhazi dị adị, a ga-ekpochapụ ha ma bido ya. Enwere ike ịchekwa ebumnuche na mgbanwe gburugburu ebe obibi ka ịwụpụ nzọụkwụ a ma ọlị. Hụ Ịhọrọ ebumnuche maka ozi ndị ọzọ.
Ọ bụrụ na emechara usoro ndị gara aga nke ọma, menu na-egosi:
Agba nke menu nwere ike ịdị iche na ọdụ gị. Ị nwere ike ịgbanwe ọdịdị ya site na nhọrọ '-style'. Biko mee 'idf.py menuconfig -help' maka ozi ndị ọzọ.
2.4.4 wuo oru ngo
Wulite oru ngo site n'ịgba ọsọ:
idf .py wuo
Iwu a ga-achịkọta ngwa na ihe niile ESP-IDF, mgbe ahụ ọ ga-emepụta bootloader, tebụl nkebi, na ọnụọgụ abụọ ngwa.
$ idf .py wuo
Na-agba ọsọ cmake na ndekọ / ụzọ/to/hello_world/build
Na-eme "cmake -G Ninja -- ịdọ aka ná ntị-enweghị aha / ụzọ / gaa / ndewo_ụwa"…
Dọọ aka ná ntị banyere ụkpụrụ ndị na-amachaghị.
-- Achọtara Git: /usr/bin/git (ụdị a chọtara "2.17.0")
-- wulite akụrụngwa aws_iot efu n'ihi nhazi
-- Aha akụkụ:…
-- Ụzọ akụkụ:…
… (ahịrị ndị ọzọ nke nrụpụta sistemụ nrụpụta) [527/527] Na-emepụta ndewo -world.bin esptool .py v2.3.1
Nrụpụta ọrụ zuru oke. Iji gbanye ọkụ, mee iwu a:
../../../ components/esptool_py/esptool/esptool.py -p (PORT) -b 921600 write_flash --flash_mode dio
--flash_size detect --flash_freq 40m 0x10000 build/hello-world.bin wuo 0x1000 build /bootloader/bootloader. bin 0x8000 wuo/ partition_table / partition -table.bin ma ọ bụ na-agba ọsọ 'idf .py -p PORT flash'
Ọ bụrụ na enweghị njehie, ihe owuwu ahụ ga-agwụ site na ịmepụta ọnụọgụ abụọ .bin file.
2.4.5 Flash na ngwaọrụ
Gwuo ọnụọgụ abụọ nke ị wuru na modul ESP32-MINI-1 gị site na ịgba ọsọ:
idf .py -p PORT [-b BAUD] flash
Jiri aha ọdụ ụgbọ mmiri modul gị dochie PORT site na Nzọụkwụ: Jikọọ ngwaọrụ gị. Ị nwekwara ike ịgbanwe ọnụego baud flasher site na iji ọnụego baud ị chọrọ dochie BAUD. Ọnụego baud ndabara bụ 460800.
Maka ozi ndị ọzọ na arụmụka idf.py, hụ idf.py.
Mara:
Nhọrọ 'flash' na-arụ ọrụ na-akpaghị aka ma na-egbuke egbuke, yabụ na-agba ọsọ 'idf.py build' adịghị mkpa.
Na-agba ọsọ esptool.py na ndekọ [...]/esp/hello_world
Na-egbu "python [...]/ esp-idf/components/esptool_py/esptool/esptool.py -b 460800 write_flash
@flash_project_args ”…
esptool .py -b 460800 write_flash --flash_mode dio - -flash_size chọpụta - -flash_freq 40m 0x1000
bootloader/bootloader. bin 0x8000 partition_table / partition -table.bin 0x10000 hello-world.bin
esptool .py v2.3.1
Na-ejikọ….
Ịchọta ụdị mgbawa… ESP32
Chip bụ ESP32U4WDH (ntụgharị 3)
atụmatụ: WiFi, BT, Single Core
Na-ebugo stub…
Isi ihe na-agba ọsọ…
Ọkpụkpụ na-agba ọsọ…
Na-agbanwe ọnụego baud ka ọ bụrụ 460800
Gbanwee.
Na-ahazi nha flash…
Nha Flash achọtara akpaaka: 4MB
Ngwa ngwa ọkụ atọrọ ka 0x0220
Etinyere 22992 bytes ruo 13019…
Odere 22992 bytes (13019 abịakọrọ) na 0x00001000 na 0.3 sekọnd (dị irè 558.9 kbit/s)…
Ekwenyere mkpọ data.
Etinyere 3072 bytes ruo 82…
Odere 3072 bytes (82 abịakọrọ) na 0x00008000 na 0.0 sekọnd (dị irè 5789.3 kbit/s)…
Ekwenyere mkpọ data.
Etinyere 136672 bytes ruo 67544…
Odere 136672 bytes (67544 abịakọrọ) na 0x00010000 na 1.9 sekọnd (dị irè 567.5 kbit/s)…
Ekwenyere mkpọ data.
Hapụ…
Ntọgharị siri ike site na pin RTS…
Ọ bụrụ na ihe niile na-aga nke ọma, ngwa "hello_world" na-amalite na-agba ọsọ mgbe i wepụsịrị jumper na IO0 na GND, ma kwalitekwa bọọdụ ule.
2.4.6 Nyochaa
Iji lelee ma "hello_world" na-agba ọsọ n'ezie, pịnye 'idf.py -p PORT Monitor' (Echefula iji aha ọdụ ụgbọ mmiri gị dochie PORT).
Iwu a na-ebupụta ngwa IDF Monitor:
$ idf .py -p /dev/ttyUSB0 nyochaa
Na-agba ọsọ idf_monitor na ndekọ [...]/ esp/hello_world/build
Na-egbu ”python […]/ esp-idf/tools/idf_monitor.py -b 115200 […]/ esp/hello_world/build/ ndewo -ụwa. elf ”…
--- idf_monitor na /dev/ttyUSB0 115200 ----
Kwụsị: Ctrl+] | NchNhr: Ctrl+T | Enyemaka: Ctrl+T na-esote Ctrl+H --ets
Jun 8 2016 00:22:57
Nke mbụ: 0x1 (POWERON_RESET), akpụkpọ ụkwụ: 0x13 (SPI_FAST_FLASH_BOOT)
ets Jun 8 2016 00:22:57…
Mgbe mmalite na ndekọ nyocha gachara, ị ga-ahụ "Ndewo ụwa!" ebipụtara site na ngwa.
…
Ndewo Ụwa!
Na-amalitegharị na sekọnd 10…
Nke a bụ mgbawa esp32 nwere 1 CPU core, WiFi/BT/BLE, silicon revision 3, 4MB flash mpụga
Na-amalitegharị na sekọnd 9…
Na-amalitegharị na sekọnd 8…
Na-amalitegharị na sekọnd 7…
Iji pụọ na nyocha IDF jiri ụzọ mkpirisi Ctrl+].
Nke ahụ bụ naanị ihe ịchọrọ ịmalite na modul ESP32-MINI-1! Ugbu a ị dịla njikere ịnwale ụfọdụ ọzọ examples na ESP-IDF, ma ọ bụ gaa ozugbo ịmepụta ngwa nke gị.
Akụrụngwa mmụta
3.1 Akwụkwọ ga-agụrịrị
Njikọ ndị a na-enye akwụkwọ metụtara ESP32.
- ESP32 mpempe akwụkwọ
Akwụkwọ a na-enye mmalite maka nkọwapụta ngwaike ESP32, gụnyere ihe karịrịview,
nkọwa ntụtụ, nkọwa ọrụ, interface mpụta, njirimara eletrik, wdg. - Ntuziaka onye ọrụ ESP32 ECO V3
Akwụkwọ a na-akọwa ọdịiche dị n'etiti V3 na ntụgharị ihu silicon wafer ESP32 gara aga. - ECO na ebe nchekwa maka ahụhụ na ESP32
Akwụkwọ a na-akọwapụta ngwaike ngwaike na mgbakasị ahụ na ESP32. - Ntuziaka mmemme ESP-IDF
Ọ na-akwado ọtụtụ akwụkwọ maka ESP-IDF sitere na ntuziaka ngwaike ruo nrụtụ aka API. - ESP32 akwụkwọ ntuziaka nka
Akwụkwọ ntuziaka a na-enye ozi zuru oke maka otu esi eji ebe nchekwa ESP32 na mpụta. - ESP32 Akụrụngwa akụrụngwa
zip ahụ files gụnyere atụmatụ, nhazi PCB, Gerber, na ndepụta BOM nke modul ESP32 na bọọdụ mmepe. - Ntuziaka imepụta ngwaike ESP32
Ntuziaka ndị a na-akọwapụta omume imewe akwadoro mgbe ị na-etolite sistemu kwụ ọtọ ma ọ bụ tinye-na dabere na usoro ngwaahịa ESP32, gụnyere mgbawa ESP32, modul ESP32, na bọọdụ mmepe. - ESP32 AT Ntụziaka Ntọala na Examples
Akwụkwọ a na-ewebata iwu ESP32 AT, kọwaa otu esi eji ha, wee nye examples nke ọtụtụ commons AT iwu. - Ozi ịnye ngwaahịa ngwaahịa Espressif
3.2 Must Have nwere akụrụngwa
Nke a bụ ihe gbasara ESP32 ga-enwerịrị.
- ESP32 BBS
Nke a bụ obodo Injinia-na-Engineer (E2E) maka ESP32 ebe ị nwere ike biputere ajụjụ, kesaa ihe ọmụma, nyochaa echiche, ma nyere aka dozie nsogbu gị na ndị injinia ibe gị. - ESP32 GitHub
A na-ekesa ọrụ mmepe ESP32 n'efu n'okpuru ikikere MIT nke Espressif na GitHub. E hiwere ya iji nyere ndị mmepe aka ịmalite na ESP32 na ịkwalite ihe ọhụrụ na uto nke ihe ọmụma izugbe gbasara ngwaike na ngwanrọ gbara ngwaọrụ ESP32 gburugburu. - Ngwa ESP32
Nke a bụ a webibe ebe ndị ọrụ nwere ike budata ESP32 Flash Download Tools na zip file "ESP32 Asambodo na ule". - ESP-IDF
Nke a webibe na-ejikọ ndị ọrụ na usoro mmepe IoT gọọmentị maka ESP32. - ESP32 akụrụngwa
Nke a webibe na-enye njikọ niile akwụkwọ ESP32 dị, SDK na ngwaọrụ.
Akụkọ ngbanwe
| Ụbọchị | Ụdị | ndetu mwepụta |
| 2021-01-14 | V0.1 | Ntọhapụ izizi |
Nkwachapụta na Nwebiisinka
Ozi dị na akwụkwọ a, gụnyere URL ntụaka, ga-agbanwe agbanwe na-enweghị ọkwa.
A na-enye ozi ndị otu atọ niile dị n'akwụkwọ a dịka ọ na-enweghị akwụkwọ ikike maka izi ezi na izi ezi ya.
Ọ BỤGHỊ KWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWASỊA NKE Ọ BỤLA NKE Ọ BỤLA NKE Ọ BỤRỤ N'ỤRỤ,MAKA NKEMỤWA, MA ọ bụ ihe kpatara ya.AMPLE.
Akwụsịla ụgwọ niile, gụnyere ụgwọ maka ịda iwu ikike ọ bụla, metụtara iji ozi dị na akwụkwọ a. Ọ nweghị ikike egosipụtara ma ọ bụ nke egosipụtara, site na estoppel ma ọ bụ uzọ ọzọ, enyere ikike ikike ọgụgụ isi ọ bụla n'ime ebe a.
Akara otu Wi-Fi Alliance bụ ụghalaahịa nke Wi-Fi Alliance. Akara Bluetooth bụ ụghalaahịa edenyere n'akwụkwọ ikikere nke Bluetooth SIG.
Aha azụmaahịa niile, ụghalaahịa na ụghalaahịa edenyere n'akwụkwọ a bụ nke ndị nwe ha ma kwenye ugbu a.
Nwebiisinka © 2021 Espressif Systems (Shanghai) Co., Ltd. Ikike niile echekwabara.
Ụlọ ọrụ Espressif Systems
Akwụkwọ ntuziaka onye ọrụ ESP32-MINI-1 (nke mbido v0.1)
www.espressif.com
Akwụkwọ / akụrụngwa
 |
ESPRESSIF ESP32-MINI-1 Wi-Fi+Bluetooth Modul jikọtara nke ukwuu [pdf] Akwụkwọ ntuziaka onye ọrụ ESP32MINI1, 2AC7Z-ESP32MINI1, 2AC7ZESP32MINI1, ESP32 -MINI -1 Wi-Fi Bluetooth Module Bluetooth agbakwunyere nke ukwuu |
