ESP32MINI1
Bukana ea Mosebelisi

Ntlha ea pele v0.1
Sistimi ea Espressif
Copyright © 2021

Mabapi le Bukana ena
Bukana ena ea mosebelisi e bonts'a mokhoa oa ho qala ka module ea ESP32-MINI-1.
Lintlafatso tsa Litokomane
Ka kopo, sheba mofuta oa morao-rao ho https://www.espressif.com/en/support/download/documents.
Nalane ea Phetoho
Bakeng sa nalane ea ntlafatso ea tokomane ena, ka kopo sheba leqephe la ho qetela.
Tsebiso ea Phetoho ea Litokomane
Espressif e fana ka litsebiso tsa lengolo-tsoibila ho boloka bareki ba nchafalitsoe ka liphetoho tsa litokomane tsa tekheniki. Ka kopo ingolise ho www.espressif.com/en/subscribe.
Setifikeiti
Khoasolla litifikeiti tsa lihlahisoa tsa Espressif ho tsoa ho www.espressif.com/en/certificates.

Fetileview

1.1 Mojule o Felletseview
LE MCU module e nang le li-peripherals tse ngata. Mojule ona ke khetho e nepahetseng bakeng sa mefuta e mengata e fapaneng ea lits'ebetso tsa IoT, ho tloha ho li-automation tsa lapeng, moaho o bohlale, lisebelisoa tsa elektroniki tsa bareki ho isa taolong ea indasteri, haholo-holo e loketseng lits'ebetso tse ka har'a sebaka se kopaneng, joalo ka bulbs, switches le sockets. ESP32-MINI-1 ke Wi-Fi e kopantsoeng haholo, ea boholo bo bonyenyane ba Wi-Fi+Bluetooth® +Bluetooth ® Mojule ona o tla ka mefuta e 'meli:

• 85 °C phetolelo
• 105 °C phetolelo

Lethathamo la 1. Litlhaloso tsa ESP1MINI32

Lihlopha	Lintho	Litlhaloso
WiFi	Melao-motheo	802.11 b/g/n (802.11n ho fihla ho 150 Mbps)
		A-MPDU le A-MSDU aggregation le 0.4 µs ts'ehetso ea nako ea molebeli
	Sebaka sa maqhubu	EA-2412 ~ 2484 MHz
bluetooth®	Melao-motheo	Protocols v4.2 BR/EDR le Bluetooth® Lintlha tsa LE
	Radio	Sehlopha sa 1, sehlopha sa 2 le sehlopha sa 3 transmitter
		AFH
	Audio	CVSD le SBC
Lisebelisoa	Li-interface tsa module	Karete ea SD, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, controller ea remoured ea infrared, pulse counter, GPIO, sensor ea ho ama, ADC, DAC, Sehokelo sa Likoloi tse nang le Wire tse peli (TWAITM, e lumellana le ISO11898-1)
	kristale e kopantsoeng	kristale ea 40MHz
	SPI flash e kopantsoeng	4 MB
	Tshebetso voltage/Phepelo ea matla	3.0 V ~ 3.6 V
	Ts'ebetso ea hona joale	Karolelano: 80 mA
	Bonyane ba hajoale bo fanoa ke phepelo ea motlakase	500 mA
	Mofuta oa mocheso o sebetsang o khothalletsoang	85 °C phetolelo: -40 °C ~ +85 °C; 105 °C phetolelo: -40 °C ~ +105 °C
	Boemo ba kutloelo-bohloko ea mongobo (MSL)	Mohato 3

Tlhaloso ea Pin ea 1.2
ESP32-MINI-1 e na le 55 pins. Sheba litlhaloso tsa phini ho Lethathamo la 1-2.

Lethathamo la 1. Pin Litlhaloso

Lebitso	Che.	Mofuta	Mosebetsi
GND	1, 2, 27, 38 ~ 55	P	Fatše
3V3	3	P	Phepelo ea motlakase
I36	4	I	GPIO36, ADC1_CH0, RTC_GPIO0
I37	5	I	GPIO37, ADC1_CH1, RTC_GPIO1
I38	6	I	GPIO38, ADC1_CH2, RTC_GPIO2
I39	7	I	GPIO39, ADC1_CH3, RTC_GPIO3
EN	8	I	Holimo: e nolofalletsa chip Low: chip e tima Hlokomela: o seke wa tlohela phini e phaphamala
I34	9	I	GPIO34, ADC1_CH6, RTC_GPIO4
I35	10	I	GPIO35, ADC1_CH7, RTC_GPIO5
IO32	11	I/O	GPIO32, XTAL_32K_P (32.768 kHz crystal oscillator input), ADC1_CH4, TOUCH9, RTC_GPIO9
IO33	12	I/O	GPIO33, XTAL_32K_N (32.768 kHz crystal oscillator output), ADC1_CH5, TOUCH8, RTC_GPIO8
IO25	13	I/O	GPIO25, DAC_1, ADC2_CH8, RTC_GPIO6, EMAC_RXD0
IO26	14	I/O	GPIO26, DAC_2, ADC2_CH9, RTC_GPIO7, EMAC_RXD1
IO27	15	I/O	GPIO27, ADC2_CH7, TOUCH7, RTC_GPIO17, EMAC_RX_DV
IO14	16	I/O	GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, SD_CLK, EMAC_TXD2
IO12	17	I/O	GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3
IO13	18	I/O	GPIO13, ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID, HS2_DATA3, SD_DATA3, EMAC_RX_ER
IO15	19	I/O	GPIO15, ADC2_CH3, TOUCH3, RTC_GPIO13, MTDO, HSPICS0, HS2_CMD, SD_CMD, EMAC_RXD3
IO2	20	I/O	GPIO2, ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0, SD_DATA0
IO0	21	I/O	GPIO0, ADC2_CH1, TOUCH1, RTC_GPIO11, CLK_OUT1, EMAC_TX_CLK
IO4	22	I/O	GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER
NC	23	–	Ha ho khokahano
NC	24	–	Ha ho khokahano
IO9	25	I/O	GPIO9, HS1_DATA2, U1RXD, SD_DATA2
IO10	26	I/O	GPIO10, HS1_DATA3, U1TXD, SD_DATA3
NC	28	–	Ha ho khokahano
IO5	29	I/O	GPIO5, HS1_DATA6, VSPICS0, EMAC_RX_CLK
IO18	30	I/O	GPIO18, HS1_DATA7, VSPICLK
IO23	31	I/O	GPIO23, HS1_STROBE, VSPID
IO19	32	I/O	GPIO19, VSPIQ, U0CTS, EMAC_TXD0

Tsoelapele leqepheng le latelang

Lethathamo la 1 – le tsoa leqepheng le fetileng

Lebitso	Che.	Mofuta	Mosebetsi
IO22	33	I/O	GPIO22, VSPIWP, U0RTS, EMAC_TXD1
IO21	34	I/O	GPIO21, VSPIHD, EMAC_TX_EN
EA-RXD0	35	I/O	GPIO3, U0RXD, CLK_OUT2
EA-0	36	I/O	GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2
NC	37	–	Ha ho khokahano

¹ Lithakhisa tsa GPIO6, GPIO7, GPIO8, GPIO11, GPIO16, le GPIO17 tse ho chip ea ESP32-U4WDH li hoketsoe ho flash ea SPI e kopantsoeng mojulung 'me ha e tsoe.
² Bakeng sa lipeakanyo tsa peripheral pin, ka kopo sheba ho Lethathamo la lintlha tsa ESP32.

Qala ka ESP32MINI1

2.1 Seo U se Hlokang
Ho nts'etsapele lits'ebetso tsa mojule oa ESP32-MINI-1 o hloka:

• 1 x ESP32-MINI-1 module
• 1 x Boto ea tlhahlobo ea Espressif RF
• 1 x USB-to-Serial board
• 1 x Thapo ea Micro-USB
• 1 x PC e sebelisang Linux

Tataisong ena ea basebelisi, re nka sistimi ea ts'ebetso ea Linux joalo ka example. Bakeng sa tlhaiso-leseling e batsi mabapi le tlhophiso ea Windows le macOS, ka kopo sheba ho ESP-IDF Programming Guide.

Khokahano ea Hardware ea 2.2

1. Solder ESP32-MINI-1 module ho boto ea tlhahlobo ea RF joalokaha ho bontšitsoe setšoantšong sa 2-1.
   
2. Hokela boto ea tlhahlobo ea RF ho boto ea USB-to-Serial ka TXD, RXD, le GND.
3. Hokela boto ea USB-to-Serial ho PC.
4. Hokela boto ea tlhahlobo ea RF ho PC kapa adaptara ea matla ho nolofalletsa phepelo ea matla a 5 V, ka thapo ea Micro-USB.
5. Nakong ea ho jarolla, hokela IO0 ho GND ka jumper. Ebe, bula "ON" boto ea tlhahlobo.
6. Khoasolla firmware ho Flash. Ho fumana lintlha, sheba likarolo tse ka tlase.
7. Kamora ho jarolla, tlosa jumper ho IO0 le GND.
8. Matlafatsa boto ea tlhahlobo ea RF hape. ESP32-MINI-1 e tla fetohela ho mokhoa oa ho sebetsa. Chip e tla bala mananeo ho tloha ho flash ha e qala.

Hlokomela:
IO0 e phahame ka hare ho naha. Haeba IO0 e setetsoe ho hula, ho khethoa mokhoa oa Boot. Haeba phini ena e hula fatše kapa e tlohetsoe e phaphametse, ho tla khethoa mokhoa oa ho jarolla. Bakeng sa tlhaiso-leseling e batsi ka ESP32-MINI-1, ka kopo sheba ho ESP32-MINI-1 Datasheet.

2.3 Theha Tikoloho ea Ntlafatso
Espressif IoT Development Framework (ESP-IDF ka bokhutšoane) ke moralo oa ho ntlafatsa lits'ebetso tse thehiloeng ho Espressif ESP32. Basebelisi ba ka etsa lits'ebetso ka ESP32 ho Windows/Linux/macOS ho latela ESP-IDF. Mona re nka sistimi ea ts'ebetso ea Linux joalo ka example.

2.3.1 Kenya Litlhoko tse hlokahalang
Ho kopanya le ESP-IDF o hloka ho fumana liphutheloana tse latelang:

• CentOS 7:
  sudo yum kenya git wget flex bison gperf python cmake ninja−build ccache dfu-util
• Ubuntu le Debian (taelo e le 'ngoe e aroloa ka mela e' meli):
  sudo apt-get install git wget flex bison gperf python python−pip python−setuptools cmake ninja -build-cache lib−dev libssl −dev dfu−util
• Arch:
  sudo Pacman −S −−e hlokehang gcc git etsa flex bison gperf python−pip cmake ninja ccache dfu−util
  Hlokomela:
• Tataiso ena e sebelisa directory ~/esp ho Linux joalo ka foldara ea ho kenya ESP-IDF.
• Hopola hore ESP-IDF ha e tšehetse libaka litseleng.

2.3.2 Fumana ESPDF
Ho theha lits'ebetso tsa module ea ESP32-MINI-1, o hloka lilaebrari tsa software tse fanoeng ke Espressif ho Sebaka sa polokelo ea ESP-IDF.
Ho fumana ESP-IDF, theha bukana ea ho kenya ( ~/esp) ho khoasolla ESP-IDF le ho kopanya polokelo ka 'git clone':
mkdir −p ~/esp
cd ~/esp
git clone −−recursive https://github.com/espressif/esp−idf.git

ESP-IDF e tla khoasolloa ho ~/esp/esp-idf. Buisana Liphetolelo tsa ESP-IDF bakeng sa tlhahisoleseling mabapi le mofuta oa ESP-IDF o ka sebelisoang maemong a itseng.

2.3.3 Hlophisa Lisebelisoa
Ntle le ESP-IDF, o boetse o hloka ho kenya lisebelisoa tse sebelisoang ke ESP-IDF, joalo ka moqapi, debugger,
Liphutheloana tsa Python, joalo-joalo ESP-IDF e fana ka mongolo o bitsoang 'install.sh' ho thusa ho hlophisa lisebelisoa ka nako e le 'ngoe.
cd ~/esp/esp-idf
./ kenya .sh
2.3.4 Theha Liphetoho tsa Tikoloho
Lisebelisoa tse kentsoeng ha li e-so kenyellelitsoe ho phapano ea tikoloho ea PATH. Ho etsa hore lisebelisoa li sebelisoe ho tsoa moleng oa taelo, mefuta e meng ea tikoloho e tlameha ho hlophisoa. ESP-IDF e fana ka mongolo o mong oa 'export.sh' o etsang joalo. Ho terminal moo o tla sebelisa ESP-IDF, matha:
. $HOME/esp/esp−idf/export.sh

Joale tsohle li se li lokile, o ka haha ​​​​projeke ea hau ea pele ho mojule oa ESP32-MINI-1.
2.4 Theha Morero oa Hao oa Pele
2.4.1 Qala Morero
Joale u se u loketse ho lokisa kopo ea hau ea mojule oa ESP32-MINI-1. U ka qala ka ho qala/hello_world morero ho tsoa ho exampLes directory ho ESP-IDF.
Kopitsa ho qala/hello_world ho ~/esp directory:
cd ~/esp
cp −r $IDF_PATH/examples/get−start/hello_world .

Ho na le mefuta e mengata ea example merero ka mohlalaampLes directory ho ESP-IDF. O ka kopitsa morero ofe kapa ofe ka tsela e ts'oanang le e hlahisitsoeng ka holimo mme oa e tsamaisa. Hape hoa khoneha ho haha ​​​​examps in-place, ntle le ho li kopitsa pele.

2.4.2 Hokela Sesebediswa sa Hao
Joale hokela mojule oa hau oa ESP32-MINI-1 komporong 'me u hlahlobe hore na mojule o bonahala tlas'a hore na ke boema-kepe bofe ba serial. Likou tsa serial ho Linux li qala ka '/ dev/tty' ka mabitso a bona. Matha taelo e ka tlase ka makhetlo a mabeli, pele ka boto e sa kengoa, ebe e kenngoa. Boema-kepe bo hlahang lekhetlo la bobeli ke bona boo u bo hlokang:
ls /dev/tty*
Hlokomela:
Boloka lebitso la boema-kepe le le haufi kaha u tla le hloka mehatong e latelang.

2.4.3 Fetola
Tsamaea ho buka ea hau ea 'hello_world' ho tloha Mohato oa 2.4.1. Qala Morero, beha chip ea ESP32 joalo ka sepheo, 'me u tsamaise leano
sesebelisoa sa tlhophiso ea morero 'menuconfig'.
cd ~/esp/hello_world
idf .py set−target esp32
idf .py menuconfig
Ho beha sepheo ka 'idf.py set-target esp32' ho lokela ho etsoa hang, ka mor'a ho bula morero o mocha. Haeba projeke e na le meaho le litlhophiso tse seng li ntse li le teng, li tla hlakoloa le ho qalisoa. Sepheo se ka bolokeha ho feto-fetoha ha tikoloho ho tlola mohato ona ho hang. Sheba Ho khetha Sepheo bakeng sa boitsebiso bo eketsehileng.
Haeba mehato e fetileng e entsoe ka nepo, menu e latelang e tla hlaha:

Mebala ea menu e ka fapana ho terminal ea hau. O ka fetola ponahalo ka khetho ea '–style'. Ka kopo, matha 'idf.py menuconfig -help'bakeng sa lintlha tse ling.

2.4.4 Aha Morero
Theha morero ka ho tsamaisa:
idf .py build
Taelo ena e tla bokella kopo le likarolo tsohle tsa ESP-IDF, ebe e tla hlahisa bootloader, tafole ea karohano, le li-binaries tsa kopo.
$ idf .py haha
Ho matha cmake ho directory /path/to/hello_world/build
E etsa "cmake −G Ninja −−warn−unitialized /path/to/hello_world"...
E hlokomelisa ka boleng bo sa tsejoeng.
−− Git e fumanoeng: /usr/bin/git (e fumanoe mofuta "2.17.0")
−− Ho aha karolo ea aws_iot e se nang letho ka lebaka la tlhophiso
−− Mabitso a likarolo: ...
−− Mekhoa ea likarolo:…
… (mehala e meng ea tlhahiso ea sistimi ea kaho) [527/527] E hlahisa hello −world.bin esptool .py v2.3.1
Kaho ea morero e felile. Ho etsa flash, tsamaisa taelo ena:
../../../ components/esptool_py/esptool/esptool.py −p (PORT) −b 921600 write_flash −−flash_mode dio
−−flash_size lemoha −−flash_freq 40m 0x10000 build/hello−world.bin haha ​​0x1000 build /bootloader/bootloader. bin 0x8000 build/ partition_table / partition −table.bin kapa tsamaisa ' idf .py −p PORT flash'

Haeba ho se na liphoso, mohaho o tla qetella ka ho hlahisa firmware binary .bin file.
2.4.5 Hlahisa ho Sesebediswa
Benya li-binaries tseo u sa tsoa li theha mojuleng oa hau oa ESP32-MINI-1 ka ho matha:
idf .py −p PORT [-b BAUD] flash
Fetola PORT ka lebitso la seriale la mojule oa hau ho tloha Mohato: Hokela Sesebelisoa sa Hau. U ka boela ua fetola sekhahla sa baud ea flasher ka ho nkela BAUD sebaka ka sekhahla seo u se hlokang. Sekhahla sa kamehla sa baud ke 460800.
Bakeng sa lintlha tse ling mabapi le likhang tsa idf.py, bona idf.py.
Hlokomela:
Khetho ea 'flash' e iketsetsa le ho khantša morero, kahoo ho sebetsa 'idf.py build' ha ho hlokahale.

E sebelisa esptool.py bukeng ea […]/ esp/hello_world
Ho etsa ”python […]/ esp−idf/components/esptool_py/esptool/esptool.py −b 460800 write_flash
@flash_project_args ”…
esptool .py −b 460800 write_flash −−flash_mode dio −−flash_size detect −−flash_freq 40m 0x1000
bootloader/bootloader. bin 0x8000 partition_table / partition −table.bin 0x10000 hello−world.bin
esptool .py v2.3.1
E ea hokela….
E lemoha mofuta oa chip … ESP32
Chip ke ESP32U4WDH (ntlafatso ea 3)
Likarolo: WiFi, BT, Single Core
E kenya stub ...
Ho matha ...
Stub e matha…
Ho fetola sekhahla sa baud ho 460800
E fetotsoe.
E lokisa boholo ba flash...
Boholo ba Flash bo iponahatsang: 4MB
Li-params tsa Flash li behiloe ho 0x0220
E hatisitsoe ka li-byte tse 22992 ho isa ho 13019…
E ngotse 22992 byte (13019 e hatisitsoe) ho 0x00001000 ka metsotsoana e 0.3 ( e sebetsa ka 558.9 kbit/s)…
Hash ea data e netefalitsoe.
E hatisitsoe ka li-byte tse 3072 ho isa ho 82…
E ngotse 3072 byte (82 e hatisitsoe) ho 0x00008000 ka metsotsoana e 0.0 ( e sebetsa ka 5789.3 kbit/s)…
Hash ea data e netefalitsoe.
E hatisitsoe ka li-byte tse 136672 ho isa ho 67544…
E ngotse 136672 byte (67544 e hatisitsoe) ho 0x00010000 ka metsotsoana e 1.9 ( e sebetsa ka 567.5 kbit/s)…
Hash ea data e netefalitsoe.
Ho tsamaea…
Ho lokisa ka thata ka phini ea RTS…
Haeba ntho e 'ngoe le e' ngoe e tsamaea hantle, kopo ea "hello_world" e qala ho sebetsa ka mor'a hore u tlose jumper ho IO0 le GND, 'me u matlafatse boto ea teko hape.
2.4.6 Lekola
Ho bona hore na "hello_world" e ntse e sebetsa, thaepa 'idf.py -p PORT monitor' (Se ke oa lebala ho nkela PORT sebaka ka lebitso la hau la serial port).
Taelo ena e qala ts'ebeliso ea IDF Monitor:
$ idf .py −p /dev/ttyUSB0 sebali
E sebelisa idf_monitor bukeng […]/ esp/hello_world/build
Ho etsa ”python […]/ esp−idf/tools/idf_monitor.py −b 115200 […]/ esp/hello_world/build/ hello −world. elf ”…
−−− idf_monitor on /dev/ttyUSB0 115200 −−−−−
Tloha: Ctrl+] | Menu: Ctrl+T | Thuso: Ctrl+T e latelwe ke Ctrl+H −−ets
La 8 Phup 2016 00:22:57
Ea pele :0x1 ​​(POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
ets Jun 8 2016 00:22:57…
Kamora ho qala le lits'oants'o tsa tlhahlobo, o lokela ho bona "Hello world!" e hatisitsoeng ke kopo.
…
Lefatše Lumela!
E qala hape ka mor'a metsotsoana e 10…
Ena ke chip ea esp32 e nang le 1 CPU core, WiFi/BT/BLE, silicon revision 3, 4MB flash flash.
E qala hape ka mor'a metsotsoana e 9…
E qala hape ka mor'a metsotsoana e 8…
E qala hape ka mor'a metsotsoana e 7…
Ho tsoa ho leihlo la IDF sebelisa sekhechana sa Ctrl+].
Ke sona feela seo u se hlokang ho qala ka module ea ESP32-MINI-1! Joale u se u loketse ho leka tse ling examples ho ESP-IDF, kapa e ea ka ho le letona ho iketsetsa lits'ebetso tsa hau.

Lisebelisoa tsa ho Ithuta

3.1 MustRead Documents
Sehokelo se latelang se fana ka litokomane tse amanang le ESP32.

• Lethathamo la lintlha tsa ESP32
  Tokomane ena e fana ka selelekela ho lintlha tsa Hardware tsa ESP32, ho kenyeletsoa le ho fetaview,
  litlhaloso tsa pin, tlhaloso ea ts'ebetso, sebopeho sa peripheral, litšobotsi tsa motlakase, joalo-joalo.
• Tataiso ea mosebelisi ea ESP32 ECO V3
  Tokomane ena e hlalosa phapang lipakeng tsa V3 le lintlafatso tsa pele tsa silicon tsa ESP32.
• ECO le Workarounds bakeng sa Litšitšili ho ESP32
  Tokomane ena e qaqisa liphoso tsa Hardware le li-workaround ho ESP32.
• ESP-IDF Programming Guide
  E fana ka litokomane tse batsi bakeng sa ESP-IDF ho tloha ho litataiso tsa lisebelisoa ho isa ho litšupiso tsa API.
• Bukana ea Tšupiso ea Setsebi ea ESP32
  Bukana e fana ka lintlha tse qaqileng mabapi le mokhoa oa ho sebelisa memori ea ESP32 le peripherals.
• Lisebelisoa tsa lisebelisoa tsa ESP32
  The zip files kenyeletsa schematics, sebopeho sa PCB, Gerber, le lenane la BOM la li-module tsa ESP32 le liboto tsa ntlafatso.
• ESP32 Litaelo tsa Moralo oa Hardware
  Litataiso li hlakisa mekhoa e khothaletsoang ea meralo ha ho etsoa litsamaiso tse ikemetseng kapa tsa tlatsetso tse ipapisitseng le letoto la lihlahisoa tsa ESP32, ho kenyeletsoa chip ea ESP32, li-module tsa ESP32, le liboto tsa nts'etsopele.
• ESP32 AT Setha sa Taelo le Examples
  Tokomane ena e hlahisa litaelo tsa ESP32 AT, e hlalosa mokhoa oa ho li sebelisa, 'me e fana ka mohlalaamptse fokolang tse 'maloa tse tloaelehileng litaelo tsa AT.
• Lintlha tsa ho Odara Lihlahisoa tsa Espressif

3.2 MustHave Resources
Mona ke lisebelisoa tse amanang le ESP32 tseo u tlamehang ho ba le tsona.

• ESP32 BBS
  Sena ke Sechaba sa Moenjineri-to-Moenjiniere (E2E) bakeng sa ESP32 moo o ka behang lipotso, oa arolelana tsebo, oa hlahloba mehopolo, 'me oa thusa ho rarolla mathata le lienjineri tse ling.
• ESP32 GitHub
  Merero ea ntlafatso ea ESP32 e ajoa ka bolokolohi tlas'a laesense ea MIT ea Espressif ho GitHub. E thehiloe ho thusa bahlahisi ho qala ka ESP32 le ho khothaletsa boqapi le kholo ea tsebo e akaretsang mabapi le hardware le software e potolohileng lisebelisoa tsa ESP32.
• Lisebelisoa tsa ESP32
  Sena ke webleqepheng la moo basebelisi ba ka khoasolla ESP32 Flash Download Tools le zip file "Setifikeiti le Teko sa ESP32"..
• ESP-IDF
  Sena webleqephe le hokahanya basebelisi le moralo oa semmuso oa nts'etsopele ea IoT bakeng sa ESP32.
• Lisebelisoa tsa ESP32
  Sena webleqephe le fana ka likhokahano tsa litokomane tsohle tse fumanehang tsa ESP32, SDK le lisebelisoa.

Nalane ea Phetoho

Letsatsi	Phetolelo	Lintlha tsa ho lokolla
2021-01-14	V0.1	Tokollo ea pele

www.espressif.com

Phatlalatso le Tsebiso ea Copyright
Lintlha tse tokomaneng ena, ho kenyelletsa URL litšupiso, li ka fetoha ntle le tsebiso.
LITSEBISO TSOHLE TSA MOKHATLO OA BORARO TOKOMANENG ENA E FUMANE KA JOALOKAHA HO SE NA LITIISETSO TSA BOHLOKOA LE HO NEPAHA KA HAO.
HA HO TIISETSO E FUMANEHANG TOKOKOMANE ENA BAKENG SA HO REKA, HO SA TLOE TLOKO, HO LOKELA BAKENG SA MORERO OA KHETHEHILENG, HONA HA E NA TEBELETSO E MANG KAPA E TSOANG HO TSOA HO TLHOKOMELISO, TLHALOSO, KAPA S.AMPLE.
Boikarabello bohle, ho kenyeletsoa le melato ea ho hatakela litokelo life kapa life tsa thepa, tse amanang le ts'ebeliso ea tlhaiso-leseling e tokomaneng ena, ha e amoheloe. Ha ho lilaesense tse hlahisoang kapa tse boletsoeng, ka estoppel kapa ka tsela e 'ngoe, ho litokelo life kapa life tsa thepa ea mahlale tse fanoeng mona.
Letšoao la Setho sa Wi-Fi Alliance ke lets'oao la khoebo la Wi-Fi Alliance. Letshwao la Bluetooth ke letshwao la kgwebo le ngodisitsweng la Bluetooth SIG.
Mabitso ohle a khoebo, matšoao le matšoao a ngolisitsoeng a boletsoeng tokomaneng ena ke thepa ea beng ba tsona 'me rea ananeloa.
Copyright © 2021 Espressif Systems (Shanghai) Co., Ltd. Litokelo tsohle li sirelelitsoe.

Sistimi ea Espressif
Buka ea Mosebelisi ea ESP32-MINI-1 (Tlhahiso ea pele ea v0.1)
www.espressif.com

Litokomane / Lisebelisoa

ESPRESSIF ESP32-MINI-1 e Kopantsoeng Haholo-holo ea Boholo bo Nyenyane ba Wi-Fi++Bluetooth Module [pdf] Bukana ea Mosebelisi ESP32MINI1, 2AC7Z-ESP32MINI1, 2AC7ZESP32MINI1, ESP32 -MINI -1 Highly-Integrated Small-Sized Wi-Fi Bluetooth Module, ESP32 -MINI -1, Highly-Integrated Small-Sized Small-Sized Bluetooth Module

Litšupiso

• Bukana ea Mosebelisi