ESP32MINI 1
Cov neeg siv phau ntawv
Ua ntej v0.1
Espressif Systems
Copyright © 2021
Txog Phau Ntawv Qhia no
Cov neeg siv phau ntawv no qhia yuav ua li cas pib nrog ESP32-MINI-1 module.
Cov ntaub ntawv hloov tshiab
Thov ib txwm xa mus rau qhov tseeb version ntawm https://www.espressif.com/en/support/download/documents.
Kev kho keeb kwm
Rau kev kho keeb kwm ntawm cov ntaub ntawv no, thov mus rau nplooj ntawv kawg.
Cov ntaub ntawv hloov kev ceeb toom
Espressif muab cov ntawv ceeb toom email kom cov neeg siv khoom hloov kho tshiab rau cov ntaub ntawv kev tshaj lij. Thov pab subscribe ntawm www.espressif.com/en/subscribe.
Daim ntawv pov thawj
Download tau daim ntawv pov thawj rau Espressif khoom los ntawm www.espressif.com/en/certificates.
Tshajview
1.1 Module dhauview
LE MCU module uas muaj cov txheej txheem nplua nuj ntawm peripherals. Cov qauv no yog qhov kev xaiv zoo tshaj plaws rau ntau yam ntawm IoT daim ntawv thov, xws li hauv tsev automation, lub tsev ntse, cov khoom siv hluav taws xob rau kev tswj hwm kev lag luam, tshwj xeeb tshaj yog tsim rau cov ntawv thov nyob rau hauv ib qho chaw compact, xws li qhov muag teev, keyboards, thiab sockets. ESP32-MINI-1 yog ib qho kev sib xyaw ua ke, me me Wi-Fi + Bluetooth ® + Bluetooth ® Cov qauv no los ntawm ob lub qauv:
- 85 ° C version
- 105 ° C version
Table 1. ESP1MINI32 Specifications
| Pawg | Cov khoom | Specifications |
|
Wi-nkaus |
Cov txheej txheem | 802.11 b/g/n (802.11n txog 150 Mbps) |
| A-MPDU thiab A-MSDU aggregation thiab 0.4 µs tiv thaiv lub sijhawm txhawb nqa | ||
| Ntau zaus | 2412 ~ 2484 MHz | |
|
Bluetooth® |
Cov txheej txheem | Protocols v4.2 BR/EDR thiab Bluetooth® LE specifications |
| Xov tooj cua | Class-1, class-2 and class-3 transmitter | |
| AFH | ||
| Suab | CVSD thiab SBC | |
|
Kho vajtse |
Module interfaces |
SD card, UART, SPI, SDIO, I2C, LED PWM, Tsav PWM, I2S, infrared chaw taws teeb controller, mem tes counter, GPIO, kov sensor, ADC, DAC, Ob-Wire Automotive Interface (TWAITM, tau tshaj ISO11898-1) |
| Integrated siv lead ua | 40 MHz siv lead ua | |
| Integrated SPI flash | 4 MB | |
| Kev khiav hauj lwm voltage/Power mov | 3.0V ~ 3.6V | |
| Ua haujlwm tam sim no | Qhov nruab nrab: 80 mA | |
| Yam tsawg kawg tam sim no xa los ntawm lub hwj chim mov | 500 mA | |
| Pom zoo ua haujlwm kub ntau | 85 ° C version: -40 ° C ~ + 85 ° C; 105 ° C version: -40 ° C ~ + 105 ° C | |
| Moisture rhiab heev theem (MSL) | Qib 3 |
1.2 Pin Nqe lus piav qhia
ESP32-MINI-1 muaj 55 tus pins. Saib tus pin txhais hauv Table 1-2.
Table 1. Pin lus txhais
| Lub npe | Tsis muaj. | Hom | Muaj nuj nqi |
| GND | 1, 2, 27, 38–55 | P | Hauv av |
| 3v 3 | 3 | P | Fais fab mov |
| kuv 36 | 4 | I | GPIO36, ADC1_CH0, RTC_GPIO0 |
| kuv 37 | 5 | I | GPIO37, ADC1_CH1, RTC_GPIO1 |
| kuv 38 | 6 | I | GPIO38, ADC1_CH2, RTC_GPIO2 |
| kuv 39 | 7 | I | GPIO39, ADC1_CH3, RTC_GPIO3 |
|
EN |
8 |
I |
High: enables lub nti Tsawg: lub nti powers tawm Nco tseg: tsis txhob tso tus pin ntab |
| kuv 34 | 9 | I | GPIO34, ADC1_CH6, RTC_GPIO4 |
| kuv 35 | 10 | I | GPIO35, ADC1_CH7, RTC_GPIO5 |
| IO32 | 11 | I/O | GPIO32, XTAL_32K_P (32.768 kHz siv lead ua oscillator input), ADC1_CH4, TOUCH9, RTC_GPIO9 |
| IO33 | 12 | I/O | GPIO33, XTAL_32K_N (32.768 kHz siv lead ua oscillator tso zis), ADC1_CH5, TOUCH8, RTC_GPIO8 |
| IO25 | 13 | I/O | GPIO25, DAC_1, ADC2_CH8, RTC_GPIO6, EMAC_RXD0 |
| IO26 | 14 | I/O | GPIO26, DAC_2, ADC2_CH9, RTC_GPIO7, EMAC_RXD1 |
| IO27 | 15 | I/O | GPIO27, ADC2_CH7, TOUCH7, RTC_GPIO17, EMAC_RX_DV |
| IO14 | 16 | I/O | GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, SD_CLK, EMAC_TXD2 |
| IO12 | 17 | I/O | GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3 |
| IO13 | 18 | I/O | GPIO13, ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID, HS2_DATA3, SD_DATA3, EMAC_RX_ER |
| IO15 | 19 | I/O | GPIO15, ADC2_CH3, TOUCH3, RTC_GPIO13, MTDO, HSPICS0, HS2_CMD, SD_CMD, EMAC_RXD3 |
| IO2 | 20 | I/O | GPIO2, ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0,
SD_DATA 0 |
| IO0 | 21 | I/O | GPIO0, ADC2_CH1, TOUCH1, RTC_GPIO11, CLK_OUT1, EMAC_TX_CLK |
| IO4 | 22 | I/O | GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER |
| NC | 23 | – | Tsis txuas |
| NC | 24 | – | Tsis txuas |
| IO9 | 25 | I/O | GPIO9, HS1_DATA2, U1RXD, SD_DATA2 |
| IO10 | 26 | I/O | GPIO10, HS1_DATA3, U1TXD, SD_DATA3 |
| NC | 28 | – | Tsis txuas |
| IO5 | 29 | I/O | GPIO5, HS1_DATA6, VSPICS0, EMAC_RX_CLK |
| IO18 | 30 | I/O | GPIO18, HS1_DATA7, VSPICLK |
| IO23 | 31 | I/O | GPIO23, HS1_STROBE, VSPID |
| IO19 | 32 | I/O | GPIO19, VSPIQ, U0CTS, EMAC_TXD0 |
Txuas ntxiv rau nplooj ntawv tom ntej
Table 1 – cont'd los ntawm nplooj ntawv dhau los
| Lub npe | Tsis muaj. | Hom | Muaj nuj nqi |
| IO22 | 33 | I/O | GPIO22, VSPIWP, U0RTS, EMAC_TXD1 |
| IO21 | 34 | I/O | GPIO21, VSPIHD, EMAC_TX_EN |
| RXD 0 | 35 | I/O | GPIO3, U0RXD, CLK_OUT2 |
| TX0 | 36 | I/O | GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2 |
| NC | 37 | – | Tsis txuas |
¹ Pins GPIO6, GPIO7, GPIO8, GPIO11, GPIO16, thiab GPIO17 ntawm ESP32-U4WDH nti tau txuas nrog SPI flash ua ke ntawm lub module thiab tsis raug coj tawm.
² Rau peripheral pin configurations, thov mus saib ESP32 Series Datasheet.
Pib ntawm ESP32MINI1
2.1 Yam Koj Xav Tau
Txhawm rau tsim cov ntawv thov rau ESP32-MINI-1 module koj xav tau:
- 1 x ESP32-MINI-1 module
- 1 x Espressif RF xeem board
- 1 x USB-rau-Serial board
- 1 x Micro-USB cable
- 1 x PC khiav Linux
Hauv phau ntawv qhia cov neeg siv no, peb coj Linux operating system ua ib qho piv txwvample. Yog xav paub ntxiv txog kev teeb tsa ntawm Windows thiab macOS, thov mus saib ESP-IDF Programming Guide.
2.2 Kev sib txuas ntawm Hardware
- solder lub ESP32-MINI-1 module rau RF xeem board raws li qhia nyob rau hauv daim duab 2-1.
- Txuas lub RF xeem board rau USB-rau-Serial board ntawm TXD, RXD, thiab GND.
- Txuas USB-rau-Serial board rau PC.
- Txuas lub Rooj Tswjhwm Saib RF rau PC lossis lub hwj chim adapter kom pab tau 5 V fais fab mov, ntawm Micro-USB cable.
- Thaum rub tawm, txuas IO0 rau GND ntawm lub jumper. Tom qab ntawd, tig "ON" lub rooj sib tham.
- Download tau firmware rau hauv flash. Yog xav paub ntxiv, saib cov tshooj hauv qab no.
- Tom qab rub tawm, tshem tawm lub jumper ntawm IO0 thiab GND.
- Fais fab mus rau RF xeem board dua. ESP32-MINI-1 yuav hloov mus rau hom kev ua haujlwm. Lub nti yuav nyeem cov kev pab cuam los ntawm flash thaum pib.
Nco tseg:
IO0 yog nyob rau hauv logic siab. Yog tias IO0 raug teeb tsa kom rub tawm, khau raj hom yog xaiv. Yog tias tus pin no rub-down lossis sab laug ntab, xaiv hom Download. Yog xav paub ntxiv txog ESP32-MINI-1, thov mus saib ESP32-MINI-1 Datasheet.
2.3 Teeb tsa ib puag ncig kev txhim kho
Espressif IoT Development Framework (ESP-IDF luv luv) yog lub hauv paus rau kev tsim cov ntawv thov raws li Espressif ESP32. Cov neeg siv tuaj yeem tsim cov ntawv thov nrog ESP32 hauv Windows / Linux / macOS raws li ESP-IDF. Ntawm no peb coj Linux operating system ua tus example.
2.3.1 Txhim kho qhov yuav tsum tau ua ua ntej
Txhawm rau suav nrog ESP-IDF koj yuav tsum tau txais cov pob hauv qab no:
- CentOS 7:
sudo yum nruab git wget flex bison gperf python cmake ninja-build ccache dfu-util - Ubuntu thiab Debian (ib qho lus txib tawg ua ob kab):
sudo apt-tau nruab git wget flex bison gperf python python-pip python-setuptools cmake ninja −build-cache libf-dev libssl −dev dfu-util - Arch:
sudo Pacman −S −-xav tau gcc git ua flex bison gperf python-pip cmake ninja ccache dfu-util
Nco tseg: - Cov lus qhia no siv cov npe ~ / esp ntawm Linux ua ib qho kev teeb tsa rau ESP-IDF.
- Nco ntsoov tias ESP-IDF tsis txhawb qhov chaw hauv txoj kev.
2.3.2 Tau ESPIDF
Txhawm rau tsim cov ntawv thov rau ESP32-MINI-1 module, koj xav tau cov tsev qiv ntawv software muab los ntawm Espressif hauv ESP-IDF repository.
Txhawm rau kom tau ESP-IDF, tsim cov ntawv qhia kev teeb tsa (~ / esp) txhawm rau rub tawm ESP-IDF rau thiab clone lub chaw cia khoom nrog 'git clone':
mkdir -p ~/esp
cd ~/np
git clone −-rov https://github.com/espressif/esp−idf.git
ESP-IDF yuav raug rub rau hauv ~/esp/esp-idf. Tham ESP-IDF Versions rau cov ntaub ntawv hais txog qhov twg ESP-IDF version siv rau hauv ib qho xwm txheej.
2.3.3 Teeb Cov Cuab Yeej
Ib cag ntawm ESP-IDF, koj kuj yuav tsum tau teeb tsa cov cuab yeej siv los ntawm ESP-IDF, xws li compiler, debugger,
Python tej pob khoom, thiab lwm yam. ESP-IDF muab ib tsab ntawv hu ua 'install.sh' los pab teeb tsa cov cuab yeej hauv ib qho mus.
cd ~/esp/esp-idf
./ nruab .sh
2.3.4 Teeb tsa ib puag ncig hloov pauv
Cov cuab yeej ntsia tseem tsis tau ntxiv rau PATH ib puag ncig hloov pauv. Txhawm rau ua kom cov cuab yeej siv tau los ntawm kab hais kom ua, qee qhov kev hloov pauv ib puag ncig yuav tsum tau teeb tsa. ESP-IDF muab lwm tsab ntawv 'export.sh' uas ua li ntawd. Hauv lub davhlau ya nyob twg uas koj yuav siv ESP-IDF, khiav:
. $HOME/esp/esp-idf/export.sh
Tam sim no txhua yam yog npaj txhij, koj tuaj yeem tsim koj thawj qhov project ntawm ESP32-MINI-1 module.
2.4 Tsim Koj Thawj Qhov Haujlwm
2.4.1 Pib ib qhov project
Tam sim no koj npaj txhij los npaj koj daim ntawv thov rau ESP32-MINI-1 module. Koj tuaj yeem pib nrog get-started/hello_world qhov project los ntawm examples directory hauv ESP-IDF.
Copy get-started/hello_world rau ~/esp directory:
cd ~/np
cp −r $IDF_PATH/examples/get-started/hello_world .
Muaj ntau yam ntawm exampua project hauv examples directory hauv ESP-IDF. Koj tuaj yeem luam ib qhov project tib yam li tau hais los saum toj no thiab khiav nws. Nws tseem ua tau los tsim examples nyob rau hauv qhov chaw, tsis tau luam lawv ua ntej.
2.4.2 Txuas koj ntaus ntawv
Tam sim no txuas koj ESP32-MINI-1 module rau lub computer thiab xyuas hauv qab qhov chaw nres nkoj qhov module pom. Serial ports hauv Linux pib nrog '/dev/tty' hauv lawv cov npe. Khiav cov lus txib hauv qab no ob zaug, thawj zaug nrog lub rooj tsavxwm unplugged, ces nrog plugged nyob rau hauv. Qhov chaw nres nkoj uas tshwm sim zaum ob yog qhov koj xav tau:
ls /dev/tty*
Nco tseg:
Khaws lub npe chaw nres nkoj ua ke raws li koj xav tau hauv cov kauj ruam tom ntej.
2.4.3 Kho
Nkag mus rau koj 'hello_world' directory los ntawm Kauj ruam 2.4.1. Pib ib qhov project, teeb ESP32 nti raws li lub hom phiaj, thiab khiav lub
project configuration utility 'menuconfig'.
cd ~/esp/hello_world
idf .py set-target esp32
idf .py menuconfig
Teem lub hom phiaj nrog 'idf.py set-target esp32' yuav tsum ua ib zaug, tom qab qhib qhov project tshiab. Yog tias qhov project muaj qee qhov kev tsim thiab teeb tsa, lawv yuav raug tshem tawm thiab pib ua haujlwm. Lub hom phiaj yuav raug cawm dim hauv ib puag ncig hloov pauv kom hla cov kauj ruam no txhua. Saib Xaiv Lub Hom Phiaj yog xav paub ntxiv.
Yog tias cov kauj ruam dhau los tau ua tiav lawm, cov ntawv qhia zaub mov nram qab no tshwm:
Cov xim ntawm cov ntawv qhia zaub mov yuav txawv ntawm koj lub davhlau ya nyob twg. Koj tuaj yeem hloov qhov tsos nrog qhov kev xaiv '–style'. Thov khiav 'idf.py menuconfig –help' kom paub ntxiv.
2.4.4 Tsim qhov project
Tsim qhov project los ntawm kev khiav:
idf .py ua
Cov lus txib no yuav suav sau daim ntawv thov thiab tag nrho ESP-IDF cov khoom, tom qab ntawd nws yuav tsim cov bootloader, faib cov lus, thiab daim ntawv thov binaries.
$idf .py tsim
Khiav cmake hauv directory /path/to/hello_world/build
Executing "cmake −G Ninja −-warn-uninitialized /path/to/hello_world"…
Ceeb toom txog cov txiaj ntsig tsis tsim nyog.
−− Pom Git: /usr/bin/git (pom version "2.17.0")
−− Building empty aws_iot component vim configuration
−- Cov npe khoom:…
−- Cov txheej txheem:…
… (ntau kab ntawm kev tsim tawm qhov system) [527/527] Tsim nyob zoo −world.bin esptool .py v2.3.1
Qhov project tsim tiav. Txhawm rau flash, khiav cov lus txib no:
../../../ components/esptool_py/esptool/esptool.py −p (PORT) −b 921600 write_flash −−flash_mode dio
−−flash_size detect −−flash_freq 40m 0x10000 build/hello-world.bin build 0x1000 build /bootloader/bootloader. bin 0x8000 build/ partition_table / partition −table.bin or run 'idf .py −p PORT flash'
Yog tias tsis muaj qhov yuam kev, qhov tsim yuav ua tiav los ntawm kev tsim cov firmware binary .bin file.
2.4.5 Nyem rau ntawm lub cuab yeej
Nyem binaries uas koj nyuam qhuav tsim rau koj ESP32-MINI-1 module los ntawm kev khiav:
idf .py −p PORT [−b BAUD] flash
Hloov PORT nrog koj lub module lub npe chaw nres nkoj los ntawm Kauj Ruam: Txuas Koj Lub Tshuab. Koj tuaj yeem hloov qhov flasher baud tus nqi los ntawm kev hloov BAUD nrog tus nqi baud koj xav tau. Lub neej ntawd baud tus nqi yog 460800.
Yog xav paub ntxiv txog kev sib cav idf.py, saib idf.py.
Nco tseg:
Qhov kev xaiv 'flash' cia li tsim thiab flashes qhov project, yog li khiav 'idf.py build' tsis tsim nyog.
Khiav esptool.py hauv phau ntawv […]/ esp/hello_world
Executing ”python […]/ esp−idf/components/esptool_py/esptool/esptool.py −b 460800 write_flash
@flash_project_args ”…
esptool .py −b 460800 write_flash −−flash_mode dio −−flash_size detect −−flash_freq 40m 0x1000
bootloader / bootloader. bin 0x8000 partition_table / muab faib −table.bin 0x10000 hello-world.bin
esptool .py v2.3.1
Kev sib txuas….
Nthuav nti hom … ESP32
Chip yog ESP32U4WDH (hloov kho 3)
Nta: WiFi, BT, Ib Tub Ntxhais
Uploading stub…
Txoj kev khiav…
Stub khiav…
Hloov pauv baud tus nqi rau 460800
Hloov.
Configuring flash size…
Auto-detected Flash loj: 4MB
Flash params teem rau 0x0220
Compressed 22992 bytes rau 13019…
Sau 22992 bytes (13019 compressed) ntawm 0x00001000 hauv 0.3 vib nas this (zoo 558.9 kbit / s)…
Hash ntawm cov ntaub ntawv pov thawj.
Compressed 3072 bytes rau 82…
Sau 3072 bytes (82 compressed) ntawm 0x00008000 hauv 0.0 vib nas this (zoo 5789.3 kbit / s)…
Hash ntawm cov ntaub ntawv pov thawj.
Compressed 136672 bytes rau 67544…
Sau 136672 bytes (67544 compressed) ntawm 0x00010000 hauv 1.9 vib nas this (zoo 567.5 kbit / s)…
Hash ntawm cov ntaub ntawv pov thawj.
Tawm mus…
Hard resetting ntawm RTS tus pin…
Yog tias txhua yam ua tau zoo, daim ntawv thov "hello_world" pib ua haujlwm tom qab koj tshem tawm lub jumper ntawm IO0 thiab GND, thiab rov ua lub zog rau lub rooj sib tham.
2.4.6 Saib
Txhawm rau xyuas seb "hello_world" puas tau khiav, ntaus 'idf.py -p PORT monitor' (Tsis txhob hnov qab hloov PORT nrog koj lub npe chaw nres nkoj serial).
Qhov kev hais kom ua no qhib daim ntawv thov IDF Monitor:
$idf .py −p /dev/ttyUSB0 saib
Khiav idf_monitor hauv phau ntawv […]/ esp/hello_world/build
Executing ”python […]/ esp−idf/tools/idf_monitor.py −b 115200 […]/ esp/hello_world/build/ hello −world. elf ”…
−−− idf_monitor on /dev/ttyUSB0 115200 −−−−−
Tawm: Ctrl+] | Ntawv qhia zaub mov: Ctrl+T | Pab: Ctrl + T ua raws li Ctrl + H −-ets
Peb 8 2016 00:22:57
rst : 0x1 (POWERON_RESET), khau raj: 0x13 (SPI_FAST_FLASH_BOOT)
thiab Jun 8 2016 00: 22: 57…
Tom qab pib ua haujlwm thiab kuaj xyuas cov ntawv teev tseg, koj yuav tsum pom "Nyob zoo ntiaj teb!" luam tawm los ntawm daim ntawv thov.
…
Nyob zoo ntiaj teb!
Rov pib dua hauv 10 vib nas this…
Qhov no yog esp32 nti nrog 1 CPU core, WiFi / BT / BLE, silicon kho 3, 4MB sab nraud flash
Rov pib dua hauv 9 vib nas this…
Rov pib dua hauv 8 vib nas this…
Rov pib dua hauv 7 vib nas this…
Txhawm rau tawm ntawm IDF saib siv lub shortcut Ctrl +].
Qhov ntawd yog txhua yam koj yuav tsum tau pib nrog ESP32-MINI-1 module! Tam sim no koj npaj txhij sim lwm yam examples hauv ESP-IDF, lossis mus rau txoj cai los tsim koj tus kheej daim ntawv thov.
Kev Kawm Txuj Ci
3.1 Yuav tsum nyeem cov ntaub ntawv
Cov ntawv txuas hauv qab no muab cov ntaub ntawv ntsig txog ESP32.
- ESP32 datasheet
Cov ntaub ntawv no qhia txog kev qhia tshwj xeeb ntawm ESP32 kho vajtse, suav nrog dhauview,
pin txhais, functional description, peripheral interface, hluav taws xob yam ntxwv, thiab lwm yam. - ESP32 ECO V3 Daim Ntawv Qhia Tus Neeg Siv
Cov ntaub ntawv no piav qhia qhov sib txawv ntawm V3 thiab yav dhau los ESP32 silicon wafer hloov kho. - ECO thiab Workarounds rau Kab laum hauv ESP32
Cov ntaub ntawv no qhia txog kev kho vajtse yuam kev thiab kev ua haujlwm hauv ESP32. - ESP-IDF Programming Guide
Nws muaj cov ntaub ntawv dav dav rau ESP-IDF xws li cov lus qhia kho vajtse rau API siv. - ESP32 Technical Reference Phau ntawv
Phau ntawv qhia cov ncauj lus kom ntxaws txog kev siv ESP32 lub cim xeeb thiab cov khoom siv peripherals. - ESP32 Hardware Resources
Lub zip files suav nrog cov schematics, PCB layout, Gerber, thiab BOM daim ntawv teev npe ntawm ESP32 modules thiab kev loj hlob boards. - ESP32 Hardware Design Guidelines
Cov txheej txheem qhia txog kev tsim qauv tsim thaum tsim ib leeg lossis ntxiv cov tshuab raws li ESP32 cov khoom lag luam, suav nrog ESP32 nti, ESP32 modules, thiab pawg thawj coj loj hlob. - ESP32 AT Instruction Set thiab Examples
Cov ntaub ntawv no qhia txog ESP32 AT cov lus txib, piav qhia siv lawv li cas, thiab muab examples ntawm ob peb commons AT commands. - Espressif Cov Khoom Muag Cov Lus Qhia
3.2 MustHave Resources
Ntawm no yog ESP32 hais txog yuav tsum muaj peev txheej.
- ESP32 BBS
Nov yog Engineer-to-Engineer (E2E) Zej Zog rau ESP32 qhov chaw koj tuaj yeem tshaj tawm cov lus nug, qhia kev paub, tshawb nrhiav tswv yim, thiab pab daws teeb meem nrog cov phooj ywg engineers. - ESP32 GitHub
ESP32 txoj haujlwm txhim kho tau muab faib dawb raws li Espressif's MIT daim ntawv tso cai ntawm GitHub. Nws yog tsim los pab cov neeg tsim khoom pib nrog ESP32 thiab txhawb nqa kev tsim kho tshiab thiab kev loj hlob ntawm kev paub dav dav txog kho vajtse thiab software nyob ib puag ncig ESP32 cov khoom siv. - ESP32 Cov cuab yeej
Qhov no yog ib webnplooj ntawv uas cov neeg siv tuaj yeem rub tawm ESP32 Flash Download Tools thiab zip file "ESP32 Certification thiab Test".. - ESP-IDF
Qhov no webnplooj ntawv txuas cov neeg siv mus rau txoj haujlwm kev txhim kho IoT rau ESP32. - ESP32 Resources
Qhov no webnplooj ntawv muab cov kev sib txuas rau txhua yam muaj ESP32 cov ntaub ntawv, SDK thiab cov cuab yeej.
Kev kho keeb kwm
| Hnub tim | Version | Tso ntawv sau tseg |
| 2021-01-14 Ib | v 0.1 | Kev tso tawm ua ntej |
Tsis lees paub thiab Daim Ntawv Ceeb Toom Copyright
Cov ntaub ntawv hauv daim ntawv no, suav nrog URL cov ntaub ntawv, yuav raug hloov pauv yam tsis tau ceeb toom.
Txhua tus neeg thib peb cov ntaub ntawv hauv cov ntaub ntawv no tau muab raws li tsis muaj kev lav phib xaub rau nws qhov tseeb thiab qhov tseeb.
TSIS TXAUS SIAB RAU COV NTAUB NTAWV NO rau nws cov khoom lag luam, tsis muaj kev cuam tshuam, kev nyab xeeb rau txhua lub hom phiaj tshwj xeeb, lossis tsis muaj kev lav phib xaub uas tshwm sim tawm ntawm txhua qhov kev tshaj tawm, SPORIFICATIONAMPLE.
Txhua qhov kev lav phib xaub, suav nrog kev lav phib xaub rau kev ua txhaum cai ntawm cov tswv cuab, hais txog kev siv cov ntaub ntawv hauv daim ntawv no tsis lees paub. Tsis muaj ntawv tso cai qhia los yog hais, los ntawm estoppel los yog lwm yam, rau ib qho kev txawj ntse muaj cai tau tso cai ntawm no.
Lub logo Wi-Fi Alliance Tus Tswv Cuab yog lub cim lag luam ntawm Wi-Fi Alliance. Lub logo Bluetooth yog lub cim lag luam ntawm Bluetooth SIG.
Tag nrho cov npe lag luam, cov cim lag luam, thiab cov cim lag luam sau npe tau hais hauv daim ntawv no yog cov cuab yeej ntawm lawv cov tswv thiab tau lees paub ntawm no.
Copyright © 2021 Espressif Systems (Shanghai) Co., Ltd. All rights reserved.
Espressif Systems
ESP32-MINI-1 Tus neeg siv phau ntawv (Preliminary v0.1)
www.espressif.com
Cov ntaub ntawv / Cov ntaub ntawv
 |
ESPRESSIF ESP32-MINI-1 Highly-Integrated Me Me Wi-Fi + Bluetooth Module [ua pdf] Tus neeg siv phau ntawv ESP32MINI1, 2AC7Z-ESP32MINI1, 2AC7ZESP32MINI1, ESP32 -MINI -1 Highly-Integrated Small-Sized Wi-Fi Bluetooth Module, ESP32 -MINI -1, Siab-Integrated Me me-Sized Wi-Fi Bluetooth Module |
