ESP32MINI1
Palapala Hoʻohana
Hoʻomaka v0.1
Nā Pūnaehana Espressif
Kuleana kope © 2021
No keia Manual
Hōʻike kēia manual mea hoʻohana pehea e hoʻomaka ai me ka module ESP32-MINI-1.
Nā Palapala Hou
E ʻoluʻolu e nānā i ka mana hou loa ma https://www.espressif.com/en/support/download/documents.
Moolelo Hooponopono
No ka moʻolelo hoʻoponopono o kēia palapala, e ʻoluʻolu e nānā i ka ʻaoʻao hope.
Hoolaha Hoololi Palapala
Hāʻawi ʻo Espressif i nā leka uila e hoʻomau i nā mea kūʻai aku i nā loli i nā palapala ʻenehana. E ʻoluʻolu e kau inoa ma www.espressif.com/en/subscribe.
Palapala hōʻoia
Hoʻoiho i nā palapala hōʻoia no nā huahana Espressif mai www.espressif.com/en/certificates.
Pauview
1.1 Ua hala ka Moduleview
LE MCU module i loaʻa i kahi pūʻulu waiwai o nā peripheral. He koho maikaʻi kēia module no nā ʻano like ʻole o nā noi IoT, mai ka home automation, ka hale akamai, nā mea uila uila a hiki i ka mana ʻoihana, kūpono loa no nā noi i loko o kahi ākea paʻa, e like me nā puʻupuʻu, nā hoʻololi, a me nā kumu. ʻO ESP32-MINI-1 kahi Wi-Fi liʻiliʻi liʻiliʻi i hui pū ʻia me Bluetooth ® + Bluetooth ® Hele mai kēia module i ʻelua mana:
- 85 °C mana
- 105 °C mana
Papa 1. ESP1MINI32 kiko'ī
| Māhele | Nā mea | Nā kikoʻī |
|
Wi-Fi |
Nā Kūlana | 802.11 b/g/n (802.11n a hiki i 150 Mbps) |
| A-MPDU a me A-MSDU hōʻuluʻulu a me 0.4 µs kākoʻo wā kiaʻi | ||
| Laulā pinepine | 2412 ~ 2484 MHz | |
|
Bluetooth® |
Nā Kūlana | Nā Kūlana v4.2 BR/EDR a me Bluetooth® Nā kikoʻī LE |
| Lekiō | Papa-1, papa-2 a me ka papa-3 transmitter | |
| AFH | ||
| Leo | CVSD a me SBC | |
|
Lako lako |
Module interfaces |
Kāleka SD, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, infrared remote control, pulse counter, GPIO, touch sensor, ADC, DAC, Two-Wire Automotive Interface (TWAITM, kūpono me ISO11898-1) |
| aniani hoʻohui | 40 MHz aniani | |
| Hoʻohui ʻia ʻo SPI flash | 4 MB | |
| Hana voltage/Ka lako mana | 3.0 V ~ 3.6 V | |
| Ke hana nei | Awelika: 80 mA | |
| ʻO kēia manawa liʻiliʻi i hāʻawi ʻia e ka lako mana | 500 mA | |
| Paipai ʻia ka pae wela hana | 85 °C mana: –40 °C ~ +85 °C; Manaʻo 105 °C: –40 °C ~ +105 °C | |
| ʻO ke kiʻekiʻe o ka moisture sensitivity level (MSL) | Papa 3 |
1.2 Hōʻike Pin
ESP32-MINI-1 he 55 mau pine. E nānā i nā wehewehe pine ma ka Papa 1-2.
Papa 1. Wehewehe Pin
| inoa | ʻAʻole. | ʻAno | Hana |
| GND | 1, 2, 27, 38 ~ 55 | P | Ka honua |
| 3V3 | 3 | P | Lako ikehu |
| I36 | 4 | I | GPIO36, ADC1_CH0, RTC_GPIO0 |
| I37 | 5 | I | GPIO37, ADC1_CH1, RTC_GPIO1 |
| I38 | 6 | I | GPIO38, ADC1_CH2, RTC_GPIO2 |
| I39 | 7 | I | GPIO39, ADC1_CH3, RTC_GPIO3 |
|
EN |
8 |
I |
Kiʻekiʻe: hiki i ka chip Haʻahaʻa: pio ka chip Nānā: mai waiho i ka pine e lana ana |
| I34 | 9 | I | GPIO34, ADC1_CH6, RTC_GPIO4 |
| I35 | 10 | I | GPIO35, ADC1_CH7, RTC_GPIO5 |
| IO32 | 11 | I/O | GPIO32, XTAL_32K_P (32.768 kHz hoʻokomo oscillator kristal), ADC1_CH4, TOUCH9, RTC_GPIO9 |
| IO33 | 12 | I/O | GPIO33, XTAL_32K_N (32.768 kHz puka oscillator kristal), ADC1_CH5, TOUCH8, RTC_GPIO8 |
| IO25 | 13 | I/O | GPIO25, DAC_1, ADC2_CH8, RTC_GPIO6, EMAC_RXD0 |
| IO26 | 14 | I/O | GPIO26, DAC_2, ADC2_CH9, RTC_GPIO7, EMAC_RXD1 |
| IO27 | 15 | I/O | GPIO27, ADC2_CH7, TOUCH7, RTC_GPIO17, EMAC_RX_DV |
| IO14 | 16 | I/O | GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, SD_CLK, EMAC_TXD2 |
| IO12 | 17 | I/O | GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3 |
| IO13 | 18 | I/O | GPIO13, ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID, HS2_DATA3, SD_DATA3, EMAC_RX_ER |
| IO15 | 19 | I/O | GPIO15, ADC2_CH3, TOUCH3, RTC_GPIO13, MTDO, HSPICS0, HS2_CMD, SD_CMD, EMAC_RXD3 |
| IO2 | 20 | I/O | GPIO2, ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0,
SD_DATA0 |
| IO0 | 21 | I/O | GPIO0, ADC2_CH1, TOUCH1, RTC_GPIO11, CLK_OUT1, EMAC_TX_CLK |
| IO4 | 22 | I/O | GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER |
| NC | 23 | – | ʻAʻole pili |
| NC | 24 | – | ʻAʻole pili |
| IO9 | 25 | I/O | GPIO9, HS1_DATA2, U1RXD, SD_DATA2 |
| IO10 | 26 | I/O | GPIO10, HS1_DATA3, U1TXD, SD_DATA3 |
| NC | 28 | – | ʻAʻole pili |
| IO5 | 29 | I/O | GPIO5, HS1_DATA6, VSPICS0, EMAC_RX_CLK |
| IO18 | 30 | I/O | GPIO18, HS1_DATA7, VSPICLK |
| IO23 | 31 | I/O | GPIO23, HS1_STROBE, VSPID |
| IO19 | 32 | I/O | GPIO19, VSPIQ, U0CTS, EMAC_TXD0 |
Hoʻomau ʻia ma ka ʻaoʻao aʻe
Papa 1 – hoʻomau ʻia mai ka ʻaoʻao mua
| inoa | ʻAʻole. | ʻAno | Hana |
| IO22 | 33 | I/O | GPIO22, VSPIWP, U0RTS, EMAC_TXD1 |
| IO21 | 34 | I/O | GPIO21, VSPIHD, EMAC_TX_EN |
| OE0 | 35 | I/O | GPIO3, U0RXD, CLK_OUT2 |
| TXD0 | 36 | I/O | GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2 |
| NC | 37 | – | ʻAʻole pili |
¹ Hoʻopili ʻia nā pine GPIO6, GPIO7, GPIO8, GPIO11, GPIO16, a me GPIO17 ma ka chip ESP32-U4WDH i ka flash SPI i hoʻohui ʻia ma ka module a ʻaʻole alakaʻi ʻia.
² No nā hoʻonohonoho pin peripheral, e ʻoluʻolu e nānā i ESP32 moʻo palapala ʻikepili.
E hoʻomaka ma ESP32MINI1
2.1 Ka mea e pono ai
No ka hoʻomohala ʻana i nā noi no ka module ESP32-MINI-1 pono ʻoe:
- 1 x ESP32-MINI-1 module
- 1 x Espressif RF papa ho'āʻo
- 1 x USB-i-Serial papa
- 1 x Micro-USB uwea
- 1 x PC e holo ana i Linux
Ma kēia alakaʻi hoʻohana, lawe mākou i ka ʻōnaehana hana Linux ma ke ʻano he example. No ka ʻike hou aku e pili ana i ka hoʻonohonoho ʻana ma Windows a me macOS, e ʻoluʻolu e nānā Alakaʻi Papahana ESP-IDF.
2.2 Hoʻohui Lako
- E kūʻai i ka module ESP32-MINI-1 i ka papa hoʻāʻo RF e like me ka hōʻike ʻana ma ke Kiʻi 2-1.
- Hoʻohui i ka papa hoʻāʻo RF i ka papa USB-to-Serial ma o TXD, RXD, a me GND.
- Hoʻohui i ka papa USB-i-Serial i ka PC.
- Hoʻohui i ka papa hoʻāʻo RF i ka PC a i ʻole kahi mea hoʻololi mana e hiki ai i ka lako mana 5 V, ma o ke kelepona Micro-USB.
- I ka hoʻoiho ʻana, hoʻohui iā IO0 iā GND ma o kahi lele. A laila, e hoʻohuli i ka "ON" i ka papa hoʻāʻo.
- Hoʻoiho i ka firmware ma ka flash. No nā kikoʻī, e ʻike i nā ʻāpana ma lalo nei.
- Ma hope o ka hoʻoiho ʻana, wehe i ka mea lele ma IO0 a me GND.
- E hoʻoikaika hou i ka papa hoʻāʻo RF. E hoʻololi ʻo ESP32-MINI-1 i ke ʻano hana. E heluhelu ka chip i nā polokalamu mai ka flash ma ka hoʻomaka ʻana.
Nānā:
He kiʻekiʻe ka IO0 i loko. Inā hoʻonoho ʻia ʻo IO0 e huki-i luna, koho ʻia ke ʻano Boot. Inā huki ʻia kēia pine a waiho ʻia paha e lana ana, koho ʻia ke ʻano Download. No ka ʻike hou aku ma ESP32-MINI-1, e ʻoluʻolu e nānā i ka Pepa ʻIkepili ESP32-MINI-1.
2.3 Hoʻonohonoho i ke Kaiapuni Hoʻomohala
ʻO ka Espressif IoT Development Framework (ESP-IDF no ka pōkole) he hoʻolālā no ka hoʻomohala ʻana i nā noi e pili ana i ka ESP32 ESP32. Hiki i nā mea hoʻohana ke hoʻomohala i nā noi me ESPXNUMX ma Windows/Linux/macOS ma muli o ESP-IDF. Eia mākou e lawe i ka ʻōnaehana hana Linux ma ke ʻano he example.
2.3.1 E hoʻouka i nā mea e pono ai
No ka hui pū ʻana me ESP-IDF pono ʻoe e kiʻi i kēia mau pūʻolo:
- CentOS 7:
sudo yum hoʻokomo git wget flex bison gperf python cmake ninja−build ccache dfu−util - ʻO Ubuntu a me Debian (kahi kauoha i ʻelua laina):
sudo apt−e hoʻokomo i ka git wget flex bison gperf python python−pip python−setuptools cmake ninja −build-cache libffi −dev libssl −dev dfu−util - Arch:
sudo Pacman −S −−pono gcc git make flex bison gperf python−pip cmake ninja ccache dfu−util
Nānā: - Hoʻohana kēia alakaʻi i ka papa kuhikuhi ~/esp ma Linux ma ke ʻano he waihona hoʻonohonoho no ESP-IDF.
- E hoʻomanaʻo ʻaʻole kākoʻo ʻo ESP-IDF i nā hakahaka ma nā ala.
2.3.2 Loaʻa iā ESPIDF
No ke kūkulu ʻana i nā noi no ka module ESP32-MINI-1, pono ʻoe i nā hale waihona puke lako polokalamu i hāʻawi ʻia e Espressif ma ESP-IDF waihona.
No ka loaʻa ʻana o ESP-IDF, hana i kahi papa kuhikuhi hoʻonohonoho (~/esp) e hoʻoiho iā ESP-IDF a hoʻopaʻa i ka waihona me ka 'git clone':
mkdir −p ~/esp
cd ~/esp
git clone −−recursive https://github.com/espressif/esp−idf.git
E hoʻoiho ʻia ʻo ESP-IDF i ~/esp/esp-idf. Kūkākūkā Nā Manaʻo ESP-IDF no ka ʻike e pili ana i ka mana ESP-IDF e hoʻohana ai i kahi kūlana.
2.3.3 Hoʻonohonoho i nā mea hana
Ma waho aʻe o ka ESP-IDF, pono ʻoe e hoʻokomo i nā mea hana i hoʻohana ʻia e ESP-IDF, e like me ka compiler, debugger,
Nā pūʻolo Python, a pēlā aku. Hāʻawi ʻo ESP-IDF i kahi palapala i kapa ʻia ʻo 'install.sh' e kōkua i ka hoʻonohonoho ʻana i nā mea hana i ka hele hoʻokahi.
cd ~/esp/esp−idf
./ hoʻokomo .sh
2.3.4 Hoʻonohonoho i nā ʻano like ʻole
ʻAʻole i hoʻohui ʻia nā mea hana i hoʻokomo ʻia i ka hoʻololi kaiapuni PATH. No ka hoʻohana ʻana i nā mea hana mai ka laina kauoha, pono e hoʻonohonoho ʻia kekahi mau ʻano hoʻololi. Hāʻawi ʻo ESP-IDF i kahi palapala 'export.sh' e hana i kēlā. Ma ka pahu kahi āu e hoʻohana ai i ka ESP-IDF, holo:
. $HOME/esp/esp−idf/export.sh
I kēia manawa ua mākaukau nā mea a pau, hiki iā ʻoe ke kūkulu i kāu papahana mua ma ka module ESP32-MINI-1.
2.4 Hana i kāu papahana mua
2.4.1 Hoʻomaka i kahi papahana
I kēia manawa ua mākaukau ʻoe e hoʻomākaukau i kāu noi no ka module ESP32-MINI-1. Hiki iā ʻoe ke hoʻomaka me ka hoʻomaka/hello_world papahana mai ka examples papa kuhikuhi ma ESP-IDF.
E kope i ka hoʻomaka/hello_world i ka papa kuhikuhi ~/esp:
cd ~/esp
cp −r $IDF_PATH/examples/get−started/hello_world .
Aia kahi laulima o exampnā papahana i ka examples papa kuhikuhi ma ESP-IDF. Hiki iā ʻoe ke kope i kekahi papahana e like me ka mea i hōʻike ʻia ma luna a holo. Hiki nō ke kūkulu examples in-place, me ke kope mua ole ia lakou.
2.4.2 Hoʻohui i kāu hāmeʻa
I kēia manawa, hoʻohui i kāu module ESP32-MINI-1 i ke kamepiula a nānā ma lalo o ke awa serial e ʻike ʻia ai ka module. Hoʻomaka nā awa serial ma Linux me '/dev/tty' ma ko lākou mau inoa. E holo i ke kauoha ma lalo i ʻelua manawa, ʻo ka mua me ka wehe ʻana o ka papa, a laila me ka hoʻopili ʻia.
ls /dev/tty*
Nānā:
E mālama pono i ka inoa awa e like me kāu e pono ai ma nā ʻanuʻu aʻe.
2.4.3 hoʻonohonoho
E hoʻokele i kāu papa kuhikuhi 'hello_world' mai ka Step 2.4.1. E hoʻomaka i kahi Papahana, e hoʻonoho i ka chip ESP32 e like me ka pahuhopu, a holo i ka
'menuconfig' pono hana hoʻonohonoho papahana.
cd ~/esp/hello_world
idf .py set−target esp32
idf .py menuconfig
ʻO ka hoʻonohonoho ʻana i ka pahuhopu me 'idf.py set-target esp32' pono e hana i hoʻokahi manawa, ma hope o ka wehe ʻana i kahi papahana hou. Inā loaʻa i ka papahana kekahi mau kūkulu a me nā hoʻonohonoho i loaʻa, e holoi ʻia a hoʻomaka. Hiki ke mālama ʻia ka pahu hopu ma ka ʻano hoʻololi kaiapuni e lele i kēia ʻanuʻu. E ʻike i ke koho ʻana i ka pahuhopu no ka ʻike hou aku.
Inā ua hana pololei ʻia nā ʻanuʻu mua, ʻike ʻia ka papa kuhikuhi aʻe:
Hiki ke ʻokoʻa nā kala o ka papa kuhikuhi ma kāu kikowaena. Hiki iā ʻoe ke hoʻololi i ke ʻano me ke koho '–style'. E ʻoluʻolu e holo 'idf.py menuconfig –help'no ka ʻike hou aku.
2.4.4 Hana i ka Papahana
E kūkulu i ka papahana ma ka holo ʻana:
idf .py kūkulu
Na kēia kauoha e hōʻuluʻulu i ka noi a me nā ʻāpana ESP-IDF a pau, a laila e hoʻopuka i ka bootloader, papa ʻāpana, a me nā binaries noi.
$ idf .py kūkulu
Ke holo nei ka cmake ma ka papa kuhikuhi /path/to/hello_world/build
Ke hoʻokō nei i "cmake −G Ninja −−warn−uninitialized /path/to/hello_world”…
E aʻo e pili ana i nā waiwai i hoʻomaka ʻole ʻia.
−− Loaʻa ʻo Git: /usr/bin/git (loaʻa ka mana "2.17.0")
−− Ke kūkulu ʻana i ka ʻāpana aws_iot ʻole ma muli o ka hoʻonohonoho
−− Nā inoa mea:…
−− Nā ala hui:…
… (ʻoi aku ka nui o nā laina o ke kūkulu ʻana i ka ʻōnaehana puka) [527/527] Hoʻopuka i ke aloha −world.bin esptool .py v2.3.1
Paʻa ka hana ʻana o ka papahana. No ka uila, e holo i kēia kauoha:
../../../ component/esptool_py/esptool/esptool.py −p (PORT) −b 921600 write_flash −−flash_mode dio
−−flash_size ʻike −−flash_freq 40m 0x10000 build/hello−world.bin build 0x1000 build /bootloader/bootloader. bin 0x8000 kūkulu/ partition_table / partition −table.bin a i ʻole holo 'idf .py −p PORT flash'
Inā ʻaʻohe hewa, e hoʻopau ke kūkulu ʻana ma ka hana ʻana i ka firmware binary .bin file.
2.4.5 Flash ma ka Mea Hana
Hoʻomaka i nā binaries āu i kūkulu ai ma kāu ESP32-MINI-1 module ma ka holo ʻana:
idf .py −p PORT [−b BAUD] flash
E hoʻololi iā PORT me ka inoa port serial o kāu module mai ka Step: Hoʻohui i kāu hāmeʻa. Hiki iā ʻoe ke hoʻololi i ka helu baud flasher ma ka hoʻololi ʻana i ka BAUD me ka helu baud āu e pono ai. ʻO 460800 ka helu baud paʻamau.
No ka ʻike hou aku e pili ana i nā manaʻo idf.py, e ʻike i ka idf.py.
Nānā:
ʻO ke koho 'flash' e kūkulu 'akomi a hoʻolohi i ka papahana, no laila ʻaʻole pono ka holo 'idf.py build'.
Ke holo nei i ka esptool.py ma ka papa kuhikuhi […]/ esp/hello_world
Ke hoʻokō nei i ka "python [...]/ esp−idf/components/esptool_py/esptool/esptool.py −b 460800 write_flash
@flash_project_args…
esptool .py −b 460800 write_flash −−flash_mode dio −−flash_size ʻike −−flash_freq 40m 0x1000
mea hoʻouka ukana/bootloader. bin 0x8000 partition_table / partition −table.bin 0x10000 hello−world.bin
esptool .py v2.3.1
Hoʻohui ʻia….
Ke ʻike nei i ke ʻano chip… ESP32
ʻO ka chip he ESP32U4WDH (hōʻano hou 3)
Nā hiʻohiʻona: WiFi, BT, Single Core
Ke hoʻouka nei i ka stub…
E holo ana ka stub…
Ke holo nei ka pahu…
Ke hoʻololi nei i ka helu baud i 460800
Hoʻololi ʻia.
Ke hoʻonohonoho nei i ka nui uila…
ʻIke ʻia ka nui Flash: 4MB
Hoʻonohonoho ʻia nā ʻāpana uila i 0x0220
Hoʻopili ʻia 22992 bytes i 13019…
Kākau 22992 bytes (13019 compressed) ma 0x00001000 i 0.3 kekona (kūpono 558.9 kbit/s)…
Ua hōʻoia ʻia ka Hash o ka ʻikepili.
Hoʻopili ʻia 3072 bytes i 82…
Kākau 3072 bytes (82 compressed) ma 0x00008000 i 0.0 kekona (kūpono 5789.3 kbit/s)…
Ua hōʻoia ʻia ka Hash o ka ʻikepili.
Hoʻopili ʻia 136672 bytes i 67544…
Kākau 136672 bytes (67544 compressed) ma 0x00010000 i 1.9 kekona (kūpono 567.5 kbit/s)…
Ua hōʻoia ʻia ka Hash o ka ʻikepili.
Ke haʻalele nei…
Hoʻopaʻa paʻakikī ma o ka pine RTS…
Inā holo maikaʻi nā mea a pau, hoʻomaka ka polokalamu "hello_world" e holo ma hope o kou wehe ʻana i ka mea lele ma IO0 a me GND, a hoʻāla hou i ka papa hoʻāʻo.
2.4.6 Nānā
No ka nānā ʻana inā holo ʻiʻo ʻo “hello_world”, ʻano 'idf.py -p PORT monitor' (Mai poina e hoʻololi iā PORT me kāu inoa port serial).
Hoʻomaka kēia kauoha i ka polokalamu IDF Monitor:
$ idf .py −p /dev/ttyUSB0 nānā
Ke holo nei idf_monitor ma ka papa kuhikuhi […]/ esp/hello_world/build
Ke hoʻokō nei i "python [...]/ esp−idf/tools/idf_monitor.py −b 115200 […]/ esp/hello_world/build/ hello −world. elf…
−−− idf_monitor ma /dev/ttyUSB0 115200 −−−−−
Haʻalele: Ctrl+] | Papa kuhikuhi: Ctrl+T | Kōkua: Ctrl+T a ukali ʻia e Ctrl+H −−ets
Iun 8 2016 00:22:57
mua: 0x1 (POWERON_RESET), pahu: 0x13 (SPI_FAST_FLASH_BOOT)
a i Iune 8 2016 00:22:57…
Ma hope o ka hoʻomaka ʻana a me ka hoʻopaʻa ʻana i nā log diagnostic i luna, pono ʻoe e ʻike "Aloha honua!" paʻi ʻia e ka palapala noi.
…
Aloha honua!
Hoʻomaka hou i 10 kekona…
ʻO kēia ka esp32 chip me 1 CPU core, WiFi/BT/BLE, hoʻoponopono silika 3, 4MB uila waho.
Hoʻomaka hou i 9 kekona…
Hoʻomaka hou i 8 kekona…
Hoʻomaka hou i 7 kekona…
No ka haʻalele ʻana i ka nānā IDF e hoʻohana i ka pōkole Ctrl+].
ʻO ia wale nō kāu e pono ai e hoʻomaka me ka module ESP32-MINI-1! I kēia manawa ua mākaukau ʻoe e hoʻāʻo i kekahi examples ma ESP-IDF, a i ʻole e hele pololei i ka hoʻomohala ʻana i kāu mau noi ponoʻī.
Nā Punawai Aʻo
3.1 Pono e heluhelu i nā palapala
Hāʻawi ka loulou ma lalo i nā palapala e pili ana iā ESP32.
- Pepa ʻikepili ESP32
Hāʻawi kēia palapala i kahi hoʻolauna i nā kikoʻī o ka hāmeʻa ESP32, me ka ʻoi akuview,
ʻO ka wehewehe ʻana i ka pine, ka wehewehe hana, ke kikowaena peripheral, nā hiʻohiʻona uila, etc. - ESP32 ECO V3 alakaʻi hoʻohana
Hōʻike kēia palapala i nā ʻokoʻa ma waena o V3 a me ESP32 silicon wafer hoʻoponopono hou. - ECO a me nā hoʻoponopono no nā pōpoki ma ESP32
Hōʻike kēia palapala i ka hewa a me ka hana ʻana i ka ESP32. - Alakaʻi Papahana ESP-IDF
Hāʻawi ia i nā palapala nui no ESP-IDF mai nā alakaʻi ʻenehana a hiki i ka ʻōlelo API. - ESP32 Manaʻo Kūlana ʻenehana
Hāʻawi ka manual i ka ʻike kikoʻī e pili ana i ka hoʻohana ʻana i ka hoʻomanaʻo ESP32 a me nā peripheral. - Nā Punawai Lako ESP32
ʻO ka zip files i ka schematics, PCB layout, Gerber, a me ka papa inoa BOM o ESP32 modules a me nā papa hoʻomohala. - ESP32 Nā Kūlana Hoʻolālā Lako
Hōʻike nā alakaʻi i nā hana hoʻolālā i manaʻo ʻia i ka hoʻomohala ʻana i nā ʻōnaehana kūʻokoʻa a i ʻole nā mea hoʻohui e pili ana i ka moʻo ESP32 o nā huahana, me ka chip ESP32, nā modula ESP32, a me nā papa kūkulu. - ESP32 AT Instruction Set a me Examples
Hoʻopuka kēia palapala i nā kauoha ESP32 AT, wehewehe i ka hoʻohana ʻana iā lākou, a hāʻawi iā examples o kekahi mau kauoha maʻamau AT. - Espressif Products Order Information
3.2 Pono Loaʻa nā kumuwaiwai
Eia nā kumuwaiwai e pili ana iā ESP32.
- ESP32 BBS
He Community Engineer-to-Engineer (E2E) kēia no ESP32 kahi e hiki ai iā ʻoe ke kau i nā nīnau, kaʻana like i ka ʻike, ʻimi i nā manaʻo, a kōkua i ka hoʻoponopono ʻana i nā pilikia me nā hoa ʻenekinia. - ESP32 GitHub
Hāʻawi manuahi ʻia nā papahana hoʻomohala ESP32 ma lalo o ka laikini MIT o Espressif ma GitHub. Hoʻokumu ʻia ia e kōkua i nā mea hoʻomohala e hoʻomaka me ESP32 a hoʻoulu i ka hana hou a me ka ulu ʻana o ka ʻike maʻamau e pili ana i ka lako a me nā lako polokalamu e pili ana i nā polokalamu ESP32. - Mea Hana ESP32
ʻO kēia kahi webʻaoʻao kahi e hiki ai i nā mea hoʻohana ke hoʻoiho i ka ESP32 Flash Download Tools a me ka zip file "ESP32 palapala hōʻoia a me ka ho'āʻo".. - ESP-IDF
ʻO kēia webHoʻopili ka ʻaoʻao i nā mea hoʻohana i ka hoʻolālā hoʻomohala IoT no ESP32. - Nā Punawai ESP32
ʻO kēia webHāʻawi ka ʻaoʻao i nā loulou i nā palapala ESP32 āpau, SDK a me nā mea hana.
Moolelo Hooponopono
| Lā | Manao | Hoʻokuʻu memo |
| 2021-01-14 | V0.1 | Hoʻokuʻu mua |
Hoʻolaha hoʻolaha a kope kope
ʻIke i loko o kēia palapala, me URL references, hiki ke hoololi me ka ike ole.
HOIKE 'ia ka 'ike a ka aoao kolu ma keia palapala me ka hooiaio ole.
ʻAʻohe palapala hōʻoia i hāʻawi ʻia i kēia palapala no kona hiki ke kūʻai aku, ʻaʻohe hewa, kūpono no kekahi kumu kūʻokoʻa, ʻaʻole hoʻi i loaʻa kekahi palapala hōʻoia mai loko mai o kekahi manaʻo, kikoʻī, a i ʻole.AMPLE.
ʻO nā kuleana a pau, me ke kuleana no ka uhaki ʻana i nā kuleana kuleana, e pili ana i ka hoʻohana ʻana i ka ʻike i loko o kēia palapala, ua hōʻole ʻia. ʻAʻole i hāʻawi ʻia nā laikini i hōʻike ʻia a i ʻole i ʻōlelo ʻia, e ka estoppel a i ʻole, i kekahi kuleana waiwai naʻauao ma ʻaneʻi.
ʻO ka hōʻailona Wi-Fi Alliance Member ka hōʻailona o ka Wi-Fi Alliance. ʻO ka logo Bluetooth kahi hōʻailona inoa inoa o Bluetooth SIG.
ʻO nā inoa kālepa a pau, nā hōʻailona kālepa, a me nā hōʻailona i kākau ʻia i ʻōlelo ʻia ma kēia palapala, ʻo ia ka waiwai o ko lākou mea nona kēlā me kēia a ke ʻae ʻia nei.
Kuleana kope © 2021 Espressif Systems (Shanghai) Co., Ltd. Ua mālama ʻia nā kuleana āpau.
Nā Pūnaehana Espressif
ESP32-MINI-1 Palapala Hoʻohana (Hoʻomaka v0.1)
www.espressif.com
Palapala / Punawai
 |
ESPRESSIF ESP32-MINI-1 Hoʻohui Kiʻekiʻe i hoʻohui ʻia ʻo Wi-Fi liʻiliʻi a me Bluetooth Module [pdf] Palapala Hoʻohana ESP32MINI1, 2AC7Z-ESP32MINI1, 2AC7ZESP32MINI1, ESP32 -MINI -1 Kiʻekiʻe-Hoʻohui ʻia ʻo Wi-Fi Bluetooth Module liʻiliʻi liʻiliʻi, ESP32 -MINI -1, Kiʻekiʻe-Hoʻohui ʻia ʻo Wi-Fi Bluetooth Module |
