Atụmatụ
This guide is designed to help you set up and install the R45C ModBus to Dual Analog Input-Output Converter. For complete information on programming, performance, troubleshooting, dimensions, and accessories, please refer to the Instruction Manual at www.bannerengineering.com. Chọọ maka part number 232576 to view Akwụkwọ ntuziaka. Iji akwụkwọ a na-eche na amatala ụkpụrụ na omume ụlọ ọrụ dị mkpa.
gafereview
Analog In
Mgbe ihe ngbanwe a natara uru ntinye analọgụ, a na-eziga uru ọnụọgụgụ na ndebanye aha ModBus kwesịrị ekwesị.
Ogo ntinye Analog:
- Voltage = 0 mV ruo 11,000 mV
- Ugbu a = 0 μA ruo 24,000 μA
Analọg pụtara
Ihe ntụgharị a na-enyekwa onye ọrụ ohere iwepụta uru analọgụ site na izipu uru analọgụ ọnụọgụ site na itinye uru analọgụ n'ime aha ModBus kwesịrị ekwesị.
Nsonaazụ Analog dị iche iche:
- Voltage = 0 mV ruo 11,000 mV
- Ugbu a = 0 μA ruo 24,000 μA
PDO n'èzí ezigbo oke (POVR)
Ọ bụrụ na uru Usoro Data Out (PDO) ezigara na onye ntụgharị a dị na mpụga PDO Analog Range uru, mgbe ahụ, a ga-edobe uru mmepụta analog n'ezie na otu n'ime ọkwa POVR atọ a ga-ahọrọ ma ọ gachara oge nke abụọ:
- Obere (nke ndabara): 0V ma ọ bụ 3.5mA
- Elu: 10.5V ma ọ bụ 20.5mA
- Jide: Ọkwa na-ejigide uru gara aga ruo mgbe ebighị ebi
Nwụnye igwe
Wụnye R45C ka ịnye ohere maka nlele ọrụ, nrụzi, na ọrụ ma ọ bụ nnọchi. Awụnyela R45C n'ụzọ dị otú ahụ iji nye ohere maka imeri ụma. Ihe nkedo ga-enwerịrị ike zuru oke iji kpuchido mgbaji. A na-atụ aro iji ihe nkedo na-adịgide adịgide ma ọ bụ ngwa mkpọchi iji gbochie ịtọpụ ma ọ bụ mbugharị nke ngwaọrụ ahụ. Oghere mgbago (4.5 mm) na R45C na-anabata ngwaike M4 (#8).
kpachara anya: Akwụsịla skru R45C na-arị elu n'oge ntinye. Mfefe oke nwere ike imetụta arụmọrụ nke R45C.
Ngosipụta ọnọdụ
R45C ModBus ka Dual Analog Input-Output Ntụgharị nwere ihe ngosi amber LED anọ n'akụkụ abụọ maka IOlink na nkwukọrịta analog iji nye ohere maka mkpa nwụnye ma ka na-enye ọhụụ ngosi zuru oke. Enwekwara ihe ngosi LED green n'akụkụ abụọ nke ihe ntụgharị, nke na-egosi ọkwa ike ngwaọrụ ahụ.
ModBus Amber LED
| Ngosipụta | Ọnọdụ |
| Gbanyụọ | Nzikọrịta ModBus adịghị |
| Amber na-egbu maramara (4 Hz) | Nzikọrịta ModBus na-arụ ọrụ |
| Gbanyụọ maka sekọnd abụọ | Nzikọrịta ModBus na-efunahụ mgbe ejikọtara ya |
| Ejisiri ike maka sekọnd 2 ruo Amber na-egbuke egbuke (4 Hz) | Nzikọrịta ModBus tụfuru nwa oge, mana nzikọrịta ozi eweghachiri |
Analog na Amber LED
| Ngosipụta | Ọnọdụ |
| Gbanyụọ | Uru Analog dị ugbu a dị obere karịa setpoint SP1 MA ọ bụ uru analọgụ dị ukwuu karịa setpoint SP2 |
| Amber siri ike | Uru analog ugbu a dị n'etiti setpoint SP1 NA setpoint SP2 |
| Uru dị ugbu a:
• SP1 = 0.004 A • SP2 = 0.02 A |
Voltage Uru:
• SP1 = 0 V • SP2 = 10 V |
Analog Out Amber LED
| Ngosipụta | Ọnọdụ |
| Gbanyụọ | Gbanyụọ ma ọ bụrụ na edere uru analọg PDO dị na mpụga oke mmepụta enwere ike |
| Amber siri ike | Na-agbanye ma ọ bụrụ na edere uru analọg PDO dị n'ime oke mmepụta enwere ike |
| Ogo a na-anabata ugbu a: 0 mA ruo 24mA | |
| Ekwenyere Voltage Oke: 0 V ruo 11 V | |
Nkọwapụta
- Tụkwasịnụ Voltage 12 V DC ruo 30 V DC na 50 mA kacha
- Ike ngafe-Site ugbu a 4 A kacha
- Mmetụta Ntinye Analog
- Ụdị dị ugbu a: Ihe dịka 250 ohms
- Voltage ụdị: Odika 14.3K ohms
- Mmegide Ibu Ibu Analog
- Ụdị dị ugbu a: 1 kilo-ohm kacha nguzogide ibu na 24 V DC
- Oke nguzogide ibu = [(Vcc - 4.5) ÷ 0.02 ohms]
- Voltage version: 2.5 kilohms kacha nta ibu eguzogide
- Circuit Nchedo Ọbịbịa
Echebere ya pụọ na polarity na-agbanwe agbanwe na obere oge voltages - Mwepu mgbochi ugbu a 400 μA
- Nke ziri ezi 0.5%
Vibration na Mechanical Shock
- Zutere IEC 60068-2-6 chọrọ (Mmajijiji: 10 Hz ruo 55 Hz, 0.5 mm amplitude, 5 nkeji zachaa, nkeji 30 biri)
- Zutere IEC 60068-2-27 chọrọ (ujo: 15G 11 ms oge, ọkara sine ife)
- Mkpebi 14 bits
- Njikọ
- Integral 5pin M12 njikọ njikọ ngwa ngwa nwoke
- Njikọ 4-pin M12 nwanyị njikọ ngwa-ngwa-ngwa
- Ihe owuwu
- Ihe Njikọta: Brass nwere Nickel plated
- Ahụ njikọ: PVC translucent ojii
- Ntụle gburugburu
- IP65, IP67, IP68
- Ụdị UL 1
- Ọnọdụ ọrụ
- Okpomọkụ: -40°C ruo +60°C (–40°F ruo +140°F) 90% na +60°C oke iru mmiri kacha (na-abụghị condensing)
- Okpomọkụ Nchekwa: -40C ruo +80C (-40°F ruo +176°F)
Chọrọ Nchekwa gafere ugbu a
Ịdọ aka ná ntị: A ga-emerịrị njikọ eletrik site n'aka ndị ọrụ ruru eru dịka koodu na ụkpụrụ eletriki mpaghara na nke mba.
A chọrọ nchebe n'ofe oge ka iwere ya site na ngwa ngwaahịa njedebe n'otu tebụl ewepụtara. Enwere ike inye nchebe n'ofe oge site na fusing mpụga ma ọ bụ site na mmachi dị ugbu a, inye ike klaasị 2. Agaghị ekewa ụzọ nnyefe nnyefe <24 AWG. Maka nkwado ngwaahịa ọzọ, gaa na www.bannerengineering.com.
| Nkwanye Wiring (AWG) | Achọrọ karịa nchekwa ugbu a (A) | Nkwanye Wiring (AWG) | Achọrọ karịa nchekwa ugbu a (A) |
| 20 | 5.0 | 26 | 1.0 |
| 22 | 3.0 | 28 | 0.8 |
| 24 | 1.0 | 30 | 0.5 |
Banner Engineering Corp. na-akwado ngwaahịa ya ka ha nweere onwe ya pụọ na ntụpọ n'ihe na arụ ọrụ maka otu afọ na-esote ụbọchị mbupu. Banner Engineering Corp ga-arụkwa ma ọ bụ dochie, n'efu, ngwaahịa ọ bụla arụpụtara ya nke, n'oge eweghachiri ya na ụlọ ọrụ mmepụta ihe, achọpụtara na ọ dị mma n'oge oge ikike. Akwụkwọ ikike a anaghị ekpuchi mmebi ma ọ bụ ụgwọ maka iji, mmegbu, ma ọ bụ ngwa na-adịghị mma ma ọ bụ ntinye nke ngwaahịa ọkọlọtọ.
Akwụkwọ ikike a nwere oke bụ naanị na n'ọnọdụ akwụkwọ ikike ndị ọzọ niile ma ọ bụ egosipụtara ma ọ bụ egosipụtaghị (gụnyere, na-enweghị oke, akwụkwọ ikike ọ bụla nke ngwa ahịa ma ọ bụ dabara adaba maka ebumnuche pụrụ iche), yana enweghị ikike. MA ọ bụ Azụmahịa.
Akwụkwọ ikike a bụ naanị ma kpachie maka ịrụzi ma ọ bụ, n'ikike nke Banner Engineering Corp., nnọchi. Ọ BỤGHỊ ihe omume BANNER ENGINEERING CORP ga-akwụ ụgwọ ịzụrụ ma ọ bụ onye ọ bụla ma ọ bụ ihe ọ bụla maka ego ọ bụla, mmefu, mfu, mfu nke uru, ma ọ bụ ihe omume ọ bụla, site na mmepụta ihe ma ọ bụ ihe dị iche iche. LITY Iji ngwaahịa a, ma ọ bụrụ na ọ na-ebili na nkwekọrịta ma ọ bụ akwụkwọ ikike, ụkpụrụ, mmekpa ahụ, ụgwọ siri ike, nleghara anya, ma ọ bụ ọzọ. Banner Engineering Corp. nwere ikike ịgbanwe, gbanwee ma ọ bụ melite nhazi ngwaahịa ahụ na-echeghị ọrụ ọ bụla ma ọ bụ ụgwọ ọ bụla metụtara ngwaahịa ọ bụla Banner Engineering Corp rụpụtara na mbụ. Eji, mmegbu, ma ọ bụ ngwa na-adịghị mma ma ọ bụ ntinye nke ngwaahịa a ma ọ bụ ojiji. nke ngwaahịa maka ngwa nchedo onwe onye mgbe achọpụtara ngwaahịa a ka ebughị maka ebumnuche ndị a ga-emebi akwụkwọ ikike ngwaahịa. Mgbanwe ọ bụla na ngwaahịa a na-enweghị nkwado ọ bụla nke Banner Engineering Corp ga-emebi ikike ngwaahịa ahụ. Nkọwa niile e bipụtara n'akwụkwọ a ga-agbanwe;
Ọkọlọtọ nwere ikike ịgbanwe nkọwapụta ngwaahịa ma ọ bụ melite akwụkwọ n'oge ọ bụla. Nkọwapụta na ozi ngwaahịa na bekee karịrị nke enyere n'asụsụ ọ bụla ọzọ. Maka ụdị akwụkwọ ọ bụla kacha ọhụrụ, rụtụ aka na: www.bannerengineering.com. Maka ozi patent, hụ www.bannerengineering.com/patents.
Aha akwụkwọ: R45C Modbus® ruo Dual Analog Input Output
Ntụgharị Ndenye Mmalite Ntuziaka
Nọmba akụkụ: 232575
Ntụgharị: B
Ntuziaka izizi
© Banner Engineering Corp. Ikike niile echekwabara.
Akwụkwọ / akụrụngwa
 |
BANNER R45C-MUU-UUQ Modbus ka ọ bụrụ ihe ntụgharị ihe ntinye Analog abụọ [pdf] Ntuziaka onye ọrụ R45C-MUU-UUQ Modbus ka ọ bụrụ ihe ntụgharị mmepụta ihe ntinye Analog abụọ, R45C-MUU-UUQ, Modbus na Dual Analog Ntinye Ihe Ntụgharị, Ihe Ntụgharị Mmepụta Analog Dual, Ihe Ntụgharị Analog Ntinye, Ntụgharị Ntinye Ntinye, Ntụgharị Mmepụta. |
