Nā hiʻohiʻona
This guide is designed to help you set up and install the R45C ModBus to Dual Analog Input-Output Converter. For complete information on programming, performance, troubleshooting, dimensions, and accessories, please refer to the Instruction Manual at www.bannerengineering.com. Huli no hapa helu 232576 i view ka Papa kuhikuhi. ʻO ka hoʻohana ʻana i kēia palapala manaʻo e kamaʻāina i nā kūlana a me nā hana ʻoihana pili.
Pauview
Analog In
Ke loaʻa ka waiwai hoʻokomo analog e kēia mea hoʻololi, hoʻouna ʻia ka waiwai hōʻike helu i ka papa inoa ModBus kūpono.
Nā Pae Hoʻokomo Analog:
- Voltage = 0 mV a 11,000 mV
- ʻO kēia manawa = 0 μA i 24,000 μA
Analog Out
Hāʻawi kēia mea hoʻololi i ka mea hoʻohana e hoʻopuka i kahi waiwai analog ma ka hoʻouna ʻana i ka waiwai analog helu ma ke komo ʻana i ka waiwai analog i loko o ka papa inoa ModBus kūpono.
Nā Laulā Hoʻopuka Analog:
- Voltage = 0 mV a 11,000 mV
- ʻO kēia manawa = 0 μA i 24,000 μA
PDO ma waho o ka palena kūpono (POVR)
Inā ma waho o ka waiwai PDO Analog Range ka waiwai o ka Process Data Out (PDO) i hoʻouna ʻia i kēia mea hoʻololi, a laila e hoʻonohonoho ʻia ka waiwai hoʻopuka analog maoli i kekahi o nā pae POVR koho ʻekolu ma hope o ka lohi 2 nsecond:
- Haʻahaʻa (paʻamau): 0 V a i ʻole 3.5 mA
- Kiʻekiʻe: 10.5 V a i ʻole 20.5 mA
- Paʻa: Paʻa ka pae i ka waiwai mua no ka pau ʻole
Hoʻokomo Mechanical
E hoʻouka i ka R45C no ka ʻae ʻana i ke komo no nā loiloi hana, mālama, a me ka lawelawe a i ʻole ke pani. Mai hoʻokomo i ka R45C ma ke ʻano e ʻae ai i ka lanakila ʻana. Pono e lawa ka ikaika o nā mea paʻa e pale aku i ka haki ʻana. Hoʻohana ʻia ka hoʻohana ʻana i nā mea paʻa paʻa a i ʻole nā mea paʻa paʻa e pale ai i ka wehe ʻana a i ʻole ka neʻe ʻana o ka hāmeʻa. ʻO ka lua kau (4.5 mm) i ka R45C e ʻae i ka lako M4 (#8).
ALOHA: Mai hoʻopaʻa nui i ka wili kau o R45C i ka wā e hoʻokomo ai. Hiki ke hoʻololi i ka hana o ka R45C.
Nā Hōʻike Kūlana
ʻO ka R45C ModBus i Dual Analog Input-Output Converter he ʻehā mau hōʻailona LED amber ma nā ʻaoʻao ʻelua no IOLink a me nā kamaʻilio analog e ʻae ai i nā pono hoʻonohonoho a hāʻawi mau i ka ʻike hōʻike kūpono. Aia kekahi hōʻailona LED ʻōmaʻomaʻo ma nā ʻaoʻao ʻelua o ka mea hoʻololi, e hōʻailona ana i ke kūlana mana o ka mea.
ModBus Amber LED
| Hōʻike | Kūlana |
| Paʻa | ʻAʻole i loaʻa nā kamaʻilio ModBus |
| ʻAʻulaʻula uila (4 Hz) | Hoʻoikaika nā kamaʻilio ModBus |
| Paʻa no 2 Kekona a hemo | Ua nalowale nā kamaʻilio ModBus ma hope o ka pilina |
| Paʻa no 2 Kekona a hiki i ka Amber Uku (4 Hz) | Ua nalowale nā kamaʻilio ModBus, akā ua hoʻokumu hou ke kamaʻilio |
Analog I Amber LED
| Hōʻike | Kūlana |
| Paʻa | ʻOi aku ka waiwai analog o kēia manawa ma mua o ka setpoint SP1 OR ʻoi aku ka nui o ka waiwai analog ma mua o ka setpoint SP2 |
| Amber paʻa | Aia ka waiwai like o kēia manawa ma waena o ka setpoint SP1 a me ka setpoint SP2 |
| Nā Waiwai o kēia manawa:
• SP1 = 0.004 A • SP2 = 0.02 A |
Paʻamau Voltage Waiwai:
• SP1 = 0 V • SP2 = 10 V |
Analog Out Amber LED
| Hōʻike | Kūlana |
| Paʻa | Hoʻopio inā aia ka waiwai analog PDO i kākau ʻia ma waho o ka laulima puka ʻae ʻia |
| Amber paʻa | Huli ʻia inā aia ka waiwai analog PDO i kākau ʻia i loko o ka laulā puka i ʻae ʻia |
| ʻAe ʻia o kēia manawa: 0 mA a 24 mA | |
| ʻAe ʻia Voltage Māhele: 0 V a 11 V | |
Nā kikoʻī
- Lako Voltage 12 V DC i 30 V DC ma 50 mA kiʻekiʻe
- ʻO ka mana o kēia manawa 4 A kiʻekiʻe
- Anped hoʻokomo o Impedance
- ʻO kēia manawa: Ma kahi o 250 ohms
- Voltage mana: Ma kahi o 14.3K ohms
- Analog Output Load Resistance
- ʻO ka mana o kēia manawa: 1 kilo-ohm ke kūpaʻa haʻahaʻa kiʻekiʻe ma 24 V DC
- ʻO ke kūpaʻa haʻahaʻa kiʻekiʻe loa = [(Vcc – 4.5) ÷ 0.02 ohms]
- Voltage mana: 2.5 kiloohms haawe haawe haʻahaʻa
- Kaapuni hoomalu lako
Pale ʻia mai ka polarity hoʻohuli a me ka vol transienttages - Leakage o kēia manawa Immunity 400 μA
- pololei 0.5%
ʻO ka haʻalulu a me ka haʻalulu mīkini
- Hoʻokō i nā koi IEC 60068-2-6 (Vibration: 10 Hz a i 55 Hz, 0.5 mm amplitude, 5 minuke kahili, 30 mau minuke noho)
- Hoʻokō i nā koi IEC 60068-2-27 (Shock: 15G 11 ms ka lōʻihi, hapalua hawewe sine)
- Hoʻoholo 14 mau ʻāpana
- Hoʻohui
- Mea hoʻohui 5pin M12 kāne hoʻokuʻu wikiwiki
- Mea hoʻohui 4-pin M12 wahine hoʻohui wikiwiki
- Kūkulu
- Mea hoʻopili: keleawe-plated nikela
- Kino mea hoʻohui: PVC translucent ʻeleʻele
- Pili Kaiapuni
- IP65, IP67, IP68
- ʻAno UL 1
- Nā Kūlana Hana
- Mahana: –40 °C a i +60 °C (–40 °F a i +140 °F) 90% ma +60 °C kiʻekiʻe loa pili haʻahaʻa (noncondensing)
- Mahana Waihona: –40 °C a i +80 °C (–40 °F a i +176 °F)
Pono ʻia ʻo Overcurrent Protection
OLELO HOOLAHA: Pono e hana ʻia nā hoʻohui uila e nā limahana kūpono e like me nā code a me nā kānāwai uila kūloko a me ka ʻāina.
Pono e hoʻolako ʻia ka pale overcurrent e ka noi huahana hope ma ka papa i hoʻolako ʻia. Hiki ke hāʻawi ʻia ka pale overcurrent me ka fusing o waho a i ʻole ma o Current Limiting, Class 2 Power Supply. ʻAʻole e hoʻopili ʻia nā alakaʻi uwea hoʻolako <24 AWG. No ke kākoʻo huahana hou aku, e hele i www.bannerengineering.com.
| Hoolako Ueaea (AWG) | Pono ma luna o ka palekana o kēia manawa (A) | Hoolako Ueaea (AWG) | Pono ma luna o ka palekana o kēia manawa (A) |
| 20 | 5.0 | 26 | 1.0 |
| 22 | 3.0 | 28 | 0.8 |
| 24 | 1.0 | 30 | 0.5 |
Hoʻokuʻu ʻia ʻo Banner Engineering Corp. i kāna mau huahana mai nā hemahema o ka waiwai a me ka hana no hoʻokahi makahiki ma hope o ka lā i hoʻouna ʻia ai. E hoʻoponopono a hoʻololi paha ʻo Banner Engineering Corp., me ka uku ʻole, i kekahi huahana o kāna hana ʻana, i ka manawa i hoʻihoʻi ʻia ai i ka hale hana, ʻike ʻia ua hemahema i ka wā o ka palapala hōʻoia. ʻAʻole uhi kēia palapala hōʻoia i ka pōʻino a i ʻole ke kuleana no ka hoʻohana hewa ʻana, ka hana ʻino, a i ʻole ka noi kūpono ʻole a i ʻole ka hoʻokomo ʻana i ka huahana Banner.
HE HOʻOPIʻI KĀWAI ʻAʻole kēia a ma kahi o nā palapala hōʻoia ʻē aʻe a pau inā i hōʻike ʻia a i ʻole ka palena ʻole (me ka ʻole o ka palena ʻole, nā palapala hōʻoia no ke kumu kūʻai aku), a me ka hana ʻana o ka hana ma lalo o ka hana.
He kūʻokoʻa a kaupalena ʻia kēia Warranty no ka hoʻoponopono ʻana a i ʻole, ma ka manaʻo o Banner Engineering Corp. ʻAʻole e kuleana ʻo BANNER ENGINEERING CORP. I ka mea kūʻai aku a i ʻole kekahi kanaka ʻē aʻe a i ʻole nā hui ʻē aʻe no nā kumu kūʻai hou aku, nā lilo, nā poho, nalo o ka loaʻa, a i ʻole nā mea ʻē aʻe, nā hopena a i ʻole nā pōʻino kūikawā i hopena ʻia mai kēlā me kēia huahana. No ka hoʻohana ʻana i ka huahana, inā e kū mai ana ma ka aelike a i ʻole ka palapala hōʻoia, ke kānāwai, ka hewa, ke kuleana koʻikoʻi, ka mālama ʻole, a i ʻole nā mea ʻē aʻe. Mālama ʻo Banner Engineering Corp. i ke kuleana e hoʻololi, hoʻololi a hoʻomaikaʻi paha i ka hoʻolālā ʻana o ka huahana me ka manaʻo ʻole i nā kuleana a i ʻole nā kuleana e pili ana i kekahi huahana i hana mua ʻia e Banner Engineering Corp. ʻO ka huahana no nā noi pale pilikino inā ʻike ʻia ka huahana ʻaʻole i manaʻo ʻia no ia mau kumu e hoʻopau ʻia ka palapala hōʻoia huahana. ʻO nā hoʻololi i kēia huahana me ka ʻae ʻole ʻia e Banner Engineering Corp e hoʻopau i nā palapala hōʻoia huahana. Hiki ke hoʻololi i nā kikoʻī a pau i paʻi ʻia ma kēia palapala;
Mālama ʻo Banner i ke kuleana e hoʻololi i nā kikoʻī huahana a i ʻole e hoʻohou i nā palapala i kēlā me kēia manawa. ʻO nā kikoʻī a me ka ʻike huahana ma ka ʻōlelo Pelekania ma mua o ka mea i hāʻawi ʻia ma kekahi ʻōlelo ʻē aʻe. No ka mana hou loa o kekahi palapala, e nānā i: www.bannerengineering.com. No ka ʻike patent, e ʻike www.bannerengineering.com/patents.
Poʻo inoa palapala: R45C Modbus® i Dual Analog InputOutput
Alakaʻi hoʻomaka wikiwiki mīkini hoʻololi
Helu hapa: 232575
Hoʻoponopono: B
Nā ʻōlelo kuhikuhi kumu
© Banner Engineering Corp. Aia nā kuleana āpau.
Palapala / Punawai
 |
BANNER R45C-MUU-UUQ Modbus i Dual Analog Input Output Converter [pdf] Ke alakaʻi hoʻohana R45C-MUU-UUQ Modbus i ka mea hoʻololi hoʻokomo hoʻokomo ʻelua, R45C-MUU-UUQ, Modbus i ka mīkini hoʻololi hoʻokomo ʻelua analog, mīkini hoʻololi hoʻokomo ʻelua, mea hoʻololi hoʻokomo analog, mea hoʻololi hoʻokomo, mea hoʻololi hoʻokomo, mīkini hoʻololi. |
