ADA INSTRUMENTS A4 Akwụkwọ ntuziaka onye ọrụ prodigit

Control and measurement of slope of any surface. It is used in wood processing industry (especially in furniture manufacturing industry) for wood angle accurate cutting; auto repair industry for tiring assembling angle accurate controlling; in machining industry for machine tool working angle accurate positioning; in woodwork; when setting guides for gypsum board partitions.

NDỤMỌDỤ ngwaahịa:

─ Relative/absolute measurement interc hange at any position
─ Built-in magnets on measuring surface
─ Slope measurement in % and °
─ Power-off automatically in 3 minutes
─ Portable size, convenient to co-work with other measuring tools
─ HOLD data
─ 2 built-in laser aimers

TECHNICAL PARAMETERS

Measuring range…………………. 4х90°
Resolution………………………. 0.05°
Accuracy……………………….. ±0.2°
Battery………………….. Li-On battery, 3,7V
Working temperature…………….. -10°С ~50°
Dimension……. 561х61х32 mm
Laser aimers ……………….. 635нм
Laser class ………………………. 2, <1mVt

Ọrụ

LI-ONBATTERY

Inclinometer operates from built-in Li-On battery. Battery level is shown on the display. Blinking indicator (4) without inner bars shows low battery level.
For charging, connect the charger via USB type-C wire to the socket on the back cover of the inclinometer. If the battery is fully charged, the indicator (4) doesn’t blink, all bars are filled.
IHE! Do not use charger with output voltage karịa 5V.
Oke voltage ga-emebi ngwaọrụ.

Ọrụ

Press «ON/OFF» button to switch ON the tool. The LCD displays absolute hoprizontal angle. «Level» is displayed on the screen. Press «ON/OFF» button againto switch off the tool.
If you lift the left side of the tool you will see an arrow “up” on the left side of the display. On the right side of the display you will see an arrow “down”. It means the left side is higher and right side is lower.

Measurement of relative angles. Place the tool on the surface from which it is necessary to measure the relative angle, press “ZERO” button. 0 is desplayed. «Level» is not desplayed. Then place the tool on another surface. Value of the relative angle is desplayed.
Press shortly «Hold/Tilt%» button to fix the value on the display. To continue measurements repeat short pressing of «Hold/Tilt%» button.

Pịa bọtịnụ "Jide/Tilt%" maka nkeji 2 iji tụọ mkpọda na %. Iji mee nha akụkụ na ogo, pịa ma jide bọtịnụ «Jide/Tilt%» maka nkeji abụọ.
Use the laser lines to mark the level at a distance from inclinometer. Lines can be used only for marking on vertical surfaces (such as walls) where the level is attached to. Press ON/OFF button to swtich ON/OFF the tool and select laser lines: right line, left line, both lines. Attach the tool to the vertical surface and rotate it to the desired angle focusing on the data on the display. Mark the inclination along laser lines on the vertical surface.

Magnets from all sides allow to attach the tool to the metal object.
“Err” is displayed on the screen, when the deviation is more than 45 degrees from the vertical position. Return the instrument to the upright position.

AKWALKWỌ

Press and hold ZERO button to turn on the calibration mode. Then press and hold ON/OFF button. Calibration mode is activated and “CAL 1” is displayed. Place the tool on a flat and smooth surface as shown in the picture.
Press ZERO button once in 10 seconds. “CAL 2” wil be displayed. Rotate the tool by 90 degrees in clockwise direction. Place it on the right edge towards display.

Press ZERO button once in 10 seconds. “CAL 3” wil be displayed. Rotate the tool by 90 degrees in clockwise direction. Place it on the upper edge towards display.
Press ZERO button once in 10 seconds. “CAL 4” wil be displayed. Rotate the tool by 90 degrees in clockwise direction. Place it on the left edge towards display.

Press ZERO button once in 10 seconds. “CAL 5” wil be displayed. Rotate the tool by 90 degrees in clockwise direction. Place it on the lower edge towards display.
Press ZERO button once in 10 seconds. “PASS” wil be displayed. After a while “0.00 degrees” will be also displayed. The calibration is over.

1. press ZERO in 10 min.	6. rotate the device
2. rotate the device	7. press ZERO in 10 min.
3. press ZERO in 10 min.	8. rotate the device
4. rotate the device	9. press ZERO in 10 min.
5. press ZERO in 10 min.	10. calibration is over

SAFETY OPERATION INSTRUCTIONS

Amachibidoro ya:

Jiri chaja nwere mmepụta voltage of more than 5 V to charge the battery of the device.
Use of the device not according to the instructions and use that goes beyond the permitted operations;

Use of the device in an explosive environment (gas station, gas equipment, chemical production, etc.);
Disabling the device and removing warning and indicative labels from the device;

Opening the device with tools (screwdrivers, etc.), changing the design of the device or modifying it.

NKWUKWU

This product is warranted by the manufacturer to the original purchaser to befree from defects in material and workmanship under normal use for a period oftwo (2) years from the date of purchase.
During the warranty period, and upon proof of purchase, the product will berepaired or replaced (with the same or similar model at manufactures option),without charge for either parts of labour. In case of a defect please contact thedealer where you originally purchased this product.
The warranty will not apply to this product if it has been misused, abused or altered. Without limiting the foregoing, leakage of the battery, bending or droppingthe unit are presumed to be defects resulting from misuse or abuse.

Ndụ ngwaahịa

The service life of the product is 3 years. Dispose of the device and its battery separately from household waste.

Ewezuga na ọrụ

A na-atụ anya ka onye ọrụ ngwaahịa a soro ntuziaka enyere n'akwụkwọ ntuziaka ndị ọrụ. Agbanyeghị na akụrụngwa niile hapụrụ ụlọ nkwakọba ihe anyị n'ọnọdụ zuru oke yana ngbanwe, a na-atụ anya na onye ọrụ ga-enyocha izi ezi na arụmọrụ n'ozuzu ya kwa oge. Onye nrụpụta, ma ọ bụ ndị nnọchi anya ya, anaghị ewere ọrụ ọ bụla nke nsonaazụ ezighi ezi ma ọ bụ kpachapụrụ anya ojiji ma ọ bụ ojiji ya gụnyere ihe ọ bụla kpọmkwem, na-apụtaghị ìhè, mmebi ga-esi na ya pụta, na mfu nke uru. Onye nrụpụta, ma ọ bụ ndị nnọchi anya ya, anaghị ewere ọrụ ọ bụla maka mmebi ga-esi na ya pụta, yana mfu nke uru site na ọdachi ọ bụla (ala ọmajiji, oke mmiri ozuzo, idei mmiri…), ọkụ, ihe mberede, ma ọ bụ omume nke onye ọzọ na/ma ọ bụ ojiji na-abụghị nke mbụ. ọnọdụ.
The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of profits due to a change of data, loss of data and interruption of business etc., caused by using the product or an unusable product. The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of profits caused by usage other thsn explained in the users’ manual. The manufacturer, or its representatives, assumes no responsibility for damage caused by wrong movement or action due to connecting with other products.

NKWUKWU NDỊ MMADỤ AHỤGHỊ NDỊ ỌZỌ :

Ọ bụrụ na a ga-agbanwe ọkọlọtọ ma ọ bụ nọmba ngwaahịa serial, ihichapụ, wepụ ma ọ bụ agaghị agụ ya.
Ndozi oge, ịrụzi ma ọ bụ na-agbanwe akụkụ n'ihi na ha nkịtị runout.
Ndozigharị na mgbanwe niile na ebumnuche nkwalite na mgbasawanye nke ụdị ngwa ngwaahịa, nke a kpọtụrụ aha na ntuziaka ọrụ, na-enweghị nkwekọrịta ederede nke onye na-eweta ọkachamara.
Ọrụ nke onye ọ bụla na-abụghị ụlọ ọrụ enyere ikike.
Mmebi ngwaahịa ma ọ bụ akụkụ kpatara n'ụzọ na-ezighị ezi, gụnyere, na-enweghị mmachi, itinye n'ọrụ ma ọ bụ nrgligence nke usoro ntụziaka ọrụ.
Ngalaba na-enye ọkụ, chaja, ngwa ngwa, eyi akụkụ.
Ngwaahịa, mebiri emebi site na imezi ihe, ngbanwe na-ezighi ezi, ndozi na ihe ndị na-adịghị mma na nke na-abụghị ọkọlọtọ, ọnụnọ nke mmiri ọ bụla na ihe mba ọzọ n'ime ngwaahịa ahụ.
Ọrụ nke Chineke na/ma ọ bụ omume nke ndị atọ.
Ọ bụrụ na nrụzi na-akwadoghị ruo na njedebe nke akwụkwọ ikike n'ihi mmebi n'oge a na-arụ ọrụ ngwaahịa, ọ bụ njem na nchekwa, akwụkwọ ikike anaghị ebidoghachi.

Kaadị akwụkwọ ikike
Name and model of the product _______
Serial number _____ Date of sale __________
Name of commercial organization ___
Stamp nke nzukọ azụmahịa
Oge ikike maka mbugharị ngwa bụ ọnwa 24 ka ụbọchị azụrụ ahịa mbụ gasịrị.
N'ime oge ikike a, onye nwe ngwaahịa ahụ nwere ikike maka ịrụzi ngwa ya n'efu ma ọ bụrụ na enwere ntụpọ n'ichepụta. Akwụkwọ ikike dị irè naanị na kaadị akwụkwọ ikike izizi, juputara nke ọma na nke doro anya (stamp ma ọ bụ akara nke thr ere bụ iwu).
Nyocha teknụzụ nke akụrụngwa maka njirimara mmejọ nke dị n'okpuru akwụkwọ ikike, ka emere naanị na ebe ọrụ enyere ikike. Ọ dịghị ihe ọ bụla emepụtara ga-aza ajụjụ n'ihu onye ahịa maka mmebi ozugbo ma ọ bụ nke ga-akpata, mfu nke uru ma ọ bụ mmebi ọ bụla ọzọ na-eme n'ihi ngwá ọrụ ahụ.tage. A na-anata ngwaahịa a na steeti arụ ọrụ, na-enweghị mmebi ọ bụla a na-ahụ anya, na zuru oke. A na-anwale ya n'ihu m. Enweghị m mkpesa maka ịdịmma ngwaahịa. Amaara m ọnọdụ nke ọrụ qarranty ma ekwenyere m.
Purchaser signature _______

Tupu ị rụọ ọrụ ị kwesịrị ịgụ ntuziaka ọrụ!
Ọ bụrụ na ị nwere ajụjụ ọ bụla gbasara ọrụ akwụkwọ ikike na nkwado teknụzụ kpọtụrụ onye na-ere ngwaahịa a

No.101 Xinming West Road, Jintan Development Mpaghara,
Changzhou Jiangsu China
Emebere na china
adainstruments.com

Akwụkwọ / akụrụngwa

ADA INSTRUMENTS A4 Prodigit Marker [pdf] Akwụkwọ ntuziaka onye ọrụ
A4 Prodigit Marker, A4, Prodigit Marker, Marker

Ntụaka

Akwụkwọ ntuziaka onye ọrụ

Ngwa: