SIB 321
RF Countdown Timer
Tshooj Naj Npawb BGX501-867-R06
Kev teeb tsa thiab Cov Lus Qhia Cov Neeg Siv
SIB 321
SIR 321 yog Z-Wave Plus (TM) countdown timer uas tuaj yeem siv los tswj cov khoom siv hluav taws xob los yog lwm yam khoom siv hluav taws xob ntsuas txog li 3 kW.
SIR 321 siv Z-Wave (TM) xov tooj cua zaus tshuab los sib txuas lus nrog network controllers los ntawm Secure los yog lwm yam manufacturers. Nws yog ib qho khoom siv hluav taws xob tseem ceeb uas tuaj yeem ua raws li lub network repeater.
INSTALLATION THIAB Connection yuav tsum tsuas yog nqa tawm los ntawm BYA tsim nyog tus neeg tau txais kev pab thiab nyob rau hauv raws li cov ntaub ntawv tam sim no ntawm IETT kev cai.
CEEB TOOM: ISOLATE MAINS SUPPLY ua ntej pib txhim kho thiab ua kom lub tsev yog
ZOO SIAB PHEM.
Nco tseg: SIR321 tuaj yeem ua haujlwm hauv ib qho Z-Wave network nrog rau lwm yam Z-Wave tau ntawv pov thawj cov khoom siv los ntawm lwm cov tuam txhab. Txhua qhov tsis siv roj teeb ua haujlwm nrog lub network yuav ua raws li cov neeg siv khoom rov qab tsis hais tus neeg muag khoom los ua kom muaj kev ntseeg siab ntawm lub network.
Cov LEDs ua haujlwm tau zoo thaum lub zog ua haujlwm.
Cov lus qhia siv
Txhawm rau ua haujlwm chav tsev nias lub pob BOOST ntau zaus kom txog thaum lub teeb pom kev rau lub sijhawm BOOST xav tau teeb pom kev (saib cov lus hauv qab no).
|
Qauv |
15t lub sijhawm khawm xovxwm | 2 ″ lub sijhawm khawm xovxwm | 3rd-time khawm xovxwm |
4th lub sijhawm khawm xovxwm |
| SIB 321 | 30 min V2 teev) | 60 min (1 teev) | 120 min (2 teev) | tawm |
Thaum BOOST ua haujlwm, qhov taw qhia teeb suav nrog, qhia txog lub sijhawm ntawm BOOST lub sijhawm tseem tshuav (saib cov lus hauv qab).
|
Qauv |
LED - 1 teev | LED-1 & 2 nyob rau |
LED-1, 2 & 3 rau |
| SIB 321 | Smin to3Omin laug | 31 feeb mus rau 60 feeb sab laug | 61 feeb mus rau 120 feeb sab laug |
LED -1 yuav nyem maj mam thaum 5 feeb ntawm lub sijhawm txhawb nqa tseem nyob thiab yuav flash ntawm tus nqi nrawm dua thaum 1 feeb tseem nyob. Thaum kawg ntawm lub sijhawm txhawb nqa, SIR yuav hloov mus rau lwm yam khoom siv txuas nrog.
SIR 321 tseem tuaj yeem khiav lub sijhawm ntawm 1 feeb mus rau 24 teev, nyob rau hauv Z-Wave tswj. RF LED qhia txog kev sib koom tes thiab kev koom ua ke (saib STEP-5 kom paub meej).
Cov cuab yeej tuaj yeem hloov tau oz los ntawm kev tshem tawm lub sijhawm txhawb nqa, siv ib qho ntawm cov hauv qab no:
- Yog tias BOOST khawm nyuam qhuav raug nias, tos peb vib nas this thiab tom qab ntawd nias nws dua. Qhov taw qhia teeb yuav tsum tag nrho OFF.
- Nias lub pob BOOST ntau zaus, kom txog rau thaum tag nrho cov cim taw qhia tau tig OFF.
- Nias thiab tuav hauv BOOST khawm kom txog rau thaum tag nrho cov cim taw qhia tau tig OFF.
Kev teeb tsa
Ib tug txhais tau tias ntawm disconnection ntawm cov khoom, muaj tsawg kawg yog 3 hli kev sib cuag sib cais nyob rau hauv ob tug ncej, yuav tsum tau muab tso rau nyob rau hauv lub ruaj thaiv. Peb pom zoo kom muaj kev sib cais sib cais los ntawm cov neeg siv khoom siv (24-teev khoom) tiv thaiv los ntawm 15A HRC fuse lossis, nyiam dua 16A MCB. Qee qhov xwm txheej, lub rhaub dej kub tsis ua haujlwm tuaj yeem ua rau SIR puas. Kev teeb tsa ntawm 100mA RCD yuav muab kev tiv thaiv ntxiv rau chav tsev. Yog tias SIR yuav tsum tau txuas nrog lub nplhaib tseem ceeb ces cov spur pub rau tus maub los yuav tsum tau tiv thaiv tib txoj kev. SIR tsis haum rau mounting ntawm ib tug unearthed hlau nto.
LUB SIR UNIT yuav tsum tau muab khaws cia rau hauv nws lub hnab ntim khoom kom txog thaum tag nrho cov plua plav thiab cov khoom khib nyiab tau kawm dhau los ua ntej ua kev sib txuas.
KAUJ RUAM-1 Unpack unit thiab tshem lub hau ntej
Tshem lub SIR tawm ntawm nws lub ntim thiab tom qab ntawd tshem tawm lub hau npog maj mam, siv lub hau ntswj ntsia hlau rau hauv qhov ntsuas, raws li qhia hauv daim duab hauv qab no:
KAUJ RUAM-2 Npaj SIR rau phab ntsa ntsa
SIR yog tsim rau mounting ncaj qha mus rau txhua qhov chaw mounted ib leeg-pawg molded lub thawv uas muaj qhov tsawg kawg nkaus qhov tob ntawm 25mm rau UK los yog 35mm rau Continental Europe. Kev nkag cable tuaj yeem ua los ntawm kev txiav tawm yooj yim tshaj plaws.
Tshem tawm cov txiav tawm ua ntej kho lub thawv. Yog tias tsim nyog, laum lub thawv los muab cov khoom sib txuas rau cov cables thiab cov hlua hluav taws xob hloov tau yooj yim. Ua tib zoo tshem tawm cov npoo ntse.
Xyuas kom meej tias clamp yog positioned txoj kev zoo li qhov projections ntawm lub underside ntawm clamp yuav tsum tuav txoj hlua kom ruaj khov. kab clamp screws yuav tsum nruj txaus txog li 0.4Nm.
Rau yaug phab ntsa mounting
SIR tuaj yeem txuas ncaj qha mus rau txhua tus qauv flush mounting ib leeg-kab thaiv lub thawv nrog a
Qhov tob ntawm 25mm rau UK (BS 4662), lossis 35mm rau Continental Europe (DIN 49073). Saib cov duab ntawm pawg neeg laib ntawm nplooj 23.
Clamp tag nrho cov kab hluav taws xob nto rau ntawm phab ntsa uas nyob ib sab ntawm SIR, siv lub pob tw qhov tsim nyog. Qhov hloov tau yooj yim mus rau cov khoom siv yuav tsum tau dhau los ntawm lub qhov nkag cable hauv qab ntug ntawm SIR thiab ruaj ntseg hauv qab cable cl.amp muab.
KAUJ RUAM-3 Ua kev sib txuas
Siv ib tug ntxaib-thiab-lub ntiaj teb cable nrog qhov siab tshaj plaws tus neeg xyuas pib loj ntawm 2.5mm2 ib tus neeg xyuas pib rau cov khoom xa tuaj rau SIR. Siv ib qho kev ntsuas peb-core hloov tau yooj yim los txuas rau SIR rau cov khoom siv hloov pauv. Rau cov khoom siv ntsuas txog li 2kW siv qhov tsawg kawg nkaus ntawm 1.0mm2 hloov pauv hloov pauv. Rau cov khoom siv ntsuas txog li 3kW siv qhov tsawg kawg nkaus ntawm 1.5mm2 hloov pauv tau. Cov kab hluav taws xob hloov tau yooj yim yuav tsum tau siv yog txuas SIR mus rau lub rhaub dej kub.
| Lin | Nyob hauv |
| N hauv | Tsis nyob hauv |
| 0 | Muab lub ntiaj teb davhlau ya nyob twg |
| L tawm | Ua neej nyob rau ib qho khoom siv |
| N tawm | Qhov nruab nrab tawm mus rau ib qho khoom siv |
| Cov khoom siv dav hlau hauv ntiaj teb |
Txhua tus neeg tsav tsheb hauv ntiaj teb uas tsis muaj rwb thaiv tsev yuav tsum tau hnav thiab txuas nrog lub ntiaj teb cov dav hlau nyob tom qab ntawm SIR. Tus neeg xyuas khoom hauv ntiaj teb thiab cov khoom siv hauv ntiaj teb yuav tsum siv cov kev sib txuas dav dav sib cais uas tau muab.
Tshem tawm cov khoom siv hluav taws xob thiab tom qab ntawd txuas cov conductors rau cov khoom xa tuaj thiab cov khoom siv nyob rau sab nraum qab ntawm chav tsev, raws li qhia nyob rau nplooj ntawv tom ntej. Txuas ob txoj hauv kev los ntawm opI”ional sab nraud ntsuas kub ntsuas ntsuas (yog tias muab). Cov xov hlau sojntsuam tsis muaj polarity.
Nco tseg: Qhov kub thiab txias sensor-txog kev ua haujlwm tsuas yog ua haujlwm yog tias qhov ntsuas kub sab nraud txuas nrog cov txheej txheem suav nrog / cais tawm.
KAUJ RUAM-4 Txhim kho SIR ntawm phab ntsa laib/flush phab ntsa
Ua tib zoo oXer tus SIR rau lub thawv molded / hlau thiab ruaj ntseg siv ob lub hau ntswj. Saib xyuas kom tsis txhob puas lub rwb thaiv tsev los yog ntxiab cov conductors thaum haum rau lub thawv phab ntsa. 13
STEP-5 Z-Wave commissioning sau ntawv
Cov kauj ruam suav nrog:
Txhawm rau ntxiv SIR mus rau Z-Wave network, ua ntej muab tus maub los tso rau hauv Ntxiv mod r f3 0 maub los cov lus qhia kev teeb tsa) thiab tom qab ntawd nias xuab zeb los tuav lub khawm ua ke ntawm chav tsev kom txog rau thaum RF LED staRs flash ntawm tus nqi nrawm.
Tom qab ntawd tso lub pob.
Ntxiv rau qhov ua tau zoo, RF LED yuav nres flashing.
Exclusion cov kauj ruam:
Txhawm rau tshem tawm SIR los ntawm lub network muab tus maub los tso rau hauv hom tshem tawm (saib rau cov lus qhia tswj) thiab tom qab ntawd ua raws li cov kab ke kom suav nrog, raws li saum toj no. Tom qab ua tiav kev tshem tawm ntawm RF LED yuav nyem maj mam.
|
Ntaus muaj nuj nqi |
RF LED xwm txheej |
| Unit tsis tau kos npe rau hauv lub network | RF LED qeeb flashing |
| RF tshem tawm / ntxiv txheej txheem | RF LED ceev flashing |
| RF txuas ploj mus rau tus maub los | RF LED teeb pom kev zoo |
| RF network xwm txheej zoo | RF LED tawm |
Rau qhov zoo tshaj plaws RF kev sib txuas lus, haum rau chav tsev saum toj no hauv pem teb, thiab tsawg kawg yog 30cm deb. Zam qhov chaw nyob ib sab lossis tom qab cov hlau loj loj uas tuaj yeem cuam tshuam nrog lub zog qis raéo teeb liab ntawm chav tsev thiab tus maub los.
Factory reset kauj ruam:
Nias lub pairing khawm thiab Boost khawm ib txhij kom muab lub de, vice nyob rau hauv lub Hoobkas default hom, tag nrho cov configuration, thiab koom haum teem rau lub Hoobkas default thiab tshem tawm cov cuab yeej los ntawm Z-Wave network.
Nco tseg: Siv cov txheej txheem no tsuas yog thaum tus thawj tswj hwm ploj lawm lossis ua tsis tau lwm yam. '
KAUJ RUAM-6 Haum lub hau ntej thiab kos zaum kawg
Tom qab fittings mounting screws, kho lub hauv ntej cover rov qab rau. Oper lub Print npog rau ntawm chav tsev thiab xyuas kom meej tias nws nyem qhov chaw ruaj ntseg.
Fin, ally switch on, mains supply and check that the SIR switches the appliance on and raug.
Z-Wave cov chav kawm hais kom txhawb nqa ntawm SIR 321
| Z-Wave Plus ntaus ntawv thiab lub luag haujlwm |
hom |
| Lub luag haujlwm hom | Ib txwm ntawm tus qhev (AOS) |
| Hom ntaus ntawv | On/Off power switch |
| Cov cuab yeej siv dav dav | Hloov binary |
| Cov khoom siv tshwj xeeb | Fais fab hloov binary |
Nco tseg:
- Configuration tus nqi tawm ntawm qhov ntau yuav tsis raug lees txais thiab tsis muaj kev cuam tshuam ntawm cov txiaj ntsig ntawm kev teeb tsa yav dhau los,
- Parameters 2 txog 5 tsuas yog muaj thaum lub ntsuas kub sab nraud txuas nrog. Kev Pabcuam thiab Kho
SIR tsis yog neeg siv-kev pabcuam. Thov tsis txhob dismantle lub tsev. Nyob rau hauv qhov tsis zoo tshwm sim ntawm qhov ua txhaum, thov hu rau tus kws kho cua sov lossis tus kws tshaj lij hluav taws xob tsim nyog.
|
Z-Wave Plus ntaus ntawv thiab lub luag haujlwm |
hom |
| Lub luag haujlwm hom | Ib txwm ntawm tus qhev (AOS) |
| Hom ntaus ntawv | On/Off power switch |
| Cov cuab yeej siv dav dav | Hloov binary |
| Cov khoom siv tshwj xeeb | Fais fab hloov binary |
| Z-Wave txhawb cov chav kawm hais kom ntxaws | |
| Chav kawm hais kom ua | Kev ruaj ntseg theem (Thaum suav nrog ruaj ntseg) |
| Cov chav kawm sib koom ua ke (V2) | S2 tsis lees paub |
| SIR321 txhawb nqa peb pawg koom haum Pab Pawg 1 - Lifeline (Qhov siab tshaj plaws 1 ntawm kev txhawb nqa) Pab Pawg 2 - Nodes kom tau txais daim ntawv ceeb toom lub sij hawm (Ntau tshaj 4 nodes txhawb) Pab Pawg 3 - Nodes kom tau txais cov ntaub ntawv qhia ntau qib sensor (Qhov siab tshaj plaws 4 nodes txhawb nqa) Nco tseg: Pawg-3 tsuas yog muaj thaum lub ntsuas kub sab nraud txuas nrog. |
|
| Koom haum pab pawg hais kom ua chav kawm (V3) | S2 tsis lees paub |
| Peb pawg koom haum tau txais kev txhawb nqa | |
| Pawg 1: Lub npe - "Lifeline" Profile MSB - AGI REPORT PROFILE GENERAL (0x00) = Profile LSB – AGI —QHIA: PROFILE —GENERAL LIFELINE (0x01) |
|
| Txhawb nqa Command chav kawm thiab hais kom ua - COMMANAND CLASS Device ROV QAB ROV LOS NTAWM LUB TSEV, Device RESET LO-CALLY NOTIFICATION COMMANAND CLASS SCHEDULE, COMMANAND-SCHEDULE REPORT COMMANAND CLASS SWITCH BINARY, SWITCH BINARY REPORT — COMMAND CLASS SENSOR MULTILEVEL, SENSOR MULTILEVEL REPORT (Txhawb tsuas yog nrog ntsuas kub) |
|
| Pawg 2: Lub npe – “Schedule Report' Profile MSB - AGI_REPORT_PROFILETSEEM CEEB (0x00) Profile LSB - AGI REPORT PROFILE GENERAL NA (0x00) Txhawb nqa Command chav kawm thiab hais kom ua - COMMANAND CLASS SCHEDULE, COMMAND1SCHEDULE_REPORT |
|
| Pawg 3: Lub npe - "Air Temperature" Profile MSB - AGI REPORT PROFILE SENSOR (0x31) Profile LSB – AGI Report PROFILE MULTILEVEL SENSOR HOM KUB (0x01) |
|
| Txhawb nqa Command chav kawm thiab hais kom ua - COMMAND CLASS SENSOR MULTILEVEL, SENSOR MULTILEVEL Qhia Nco tseg: Pawg-3 tsuas yog muaj thaum lub ntsuas kub sab nraud txuas nrog. |
|
| Basic command class (VI) | S2 tsis lees paub |
| Mapped rau Binary Switch Command Class: Basic Set (0x01 – 0x63) maps to Binary Switch Set (0x01 -0x63) Basic Teeb / Qhia OxFF maps rau Binary Hloov Teeb / Qhia OxFF. Basic Teeb / Qhia Ox00 maps rau Binary Hloov Teeb / Qhia Ox00 Nco tseg: Fail-safe timer functionality tau teev tseg hauv qab no hauv Binary Switch Command Class kuj tseem siv tau rau cov chav hais kom ua no. |
|
| Binary hloov hais kom ua chav kawm (V1) | S2 tsis lees paub |
| Teem lub relay ON - OxFF thiab (0x01 txog 0x63) Teem lub relay OFF - Ox00 |
|
| Nco tseg: Fail-safe timer ntawm 60 feeb pib tom qab siv tau SET hais kom ua, lub timer reloaded nrog 60 feeb ntawm txhua qhov kev sib txuas lus zoo nrog tus maub los. Nyob rau hauv rooj plaub ntawm kev sib txuas lus tsis ua hauj lwm nrog tus maub los rau 60 feeb. Fail-safe timer yuav hloov tawm lub relay thiab kev sib txuas lus tsis ua hauj lwm qhia ntawm RF LED. | |
| Configuration command class (V1) | S2 tsis lees paub |
| Chav tsev txhawb tsib configurations, saib configurations table rau cov ntsiab lus ntawm configurations muaj. | |
| Ntaus hauv zos rov pib dua (VI) | S2 tsis lees paub |
| Siv los qhia txog lub neej ntawm lub cev uas lub cuab yeej tau pib dua lub Hoobkas, thiab tawm hauv lub network. | |
| Chaw tsim tshuaj paus tshwj xeeb (V2) | S2 tsis lees paub |
| Chaw tsim tshuaj paus ID – 0x0059 (Secure Meters (UK) Limited) Yam khoom ID – Ox0010 Khoom ID - 0x0003 (Z-Wave Basic, Tsis muaj qhov ntsuas kub) 0x0004 (Z-Wave Cua sov, Nrog ntsuas kub) Ntaus ID - Hom 0 thiab 1 rau Module Serial Number (Cov ntaub ntawv hom UTF-S (hex)) |
|
| Multi-level sensor hais kom ua chav kawm (V11) | S2 tsis lees paub |
| SIR321 yuav teb rau Multilevel Sensor GET cov lus txib nrog Multilevel Sensor REPORT. Daim ntawv tshaj tawm no tuaj yeem raug xa mus rau cov nodes hauv Pab Pawg 3 raws li kev teeb tsa (Saib Configuration Command Class). Nco tseg: Qhov Command Class no tsuas yog muaj thaum lub ntsuas kub sab nraud txuas nrog. |
|
| Hwj chim theem hais kom ua chav kawm (VI) | S2 tsis lees paub |
| It txhais RF xa hluav taws xob tswj cov lus txib kom pab tau thaum txhim kho lossis sim lub network. | |
| Teem caij hais kom ua chav kawm (V1) | S2 tsis lees paub |
| Tag nrho cov lus txib tau txais kev txhawb nqa hauv chav hais kom ua no tshwj tsis yog Schedule State Set Command. Teem sijhawm ID – Ox01 Txhawb CC - Binary Hloov SET hais kom ua (tus nqi OxFF) Hom Lub Sijhawm - Pib tam sim no Duration hom – feeb Lub sijhawm ua haujlwm siab tshaj plaws - 1440 feeb Nco tseg: Tsis muaj override thiab fallback hom yog txaus siab. Binary Switch Set Command, Basic Set Command, thiab nias lub pob BOOST yuav hla lub sijhawm & vice versa. Cov Sijhawm nrog Binary Hloov Teeb Cov Lus txib tus nqi Ox00 tsis quav ntsej. |
|
| Version hais kom ua chav kawm (V2) | S2 tsis lees paub |
| Muab tus lej version ntawm Z-Wave pawg, Command Class, Firmware, thiab Hardware. | |
| Z-Wave Plus cov ntaub ntawv hais kom ua chav kawm (V2) | Tsis ruaj ntseg |
| Lub luag hauj lwm hom- ZWAVEPLUS INFO REPORT ROLE HOM SLAVE ALWA YS_ON (0x051 — Node Hom - ZWAVEPLUS INFO REPORT NODE HOM ZWAVEPLUS _NODE (0x007 installer Icon- ICON HOM GENERIC RAU OFF POWER SWITCH (0x0700) - Tus neeg siv Icon- ICON HOM GENERIC RAU OFF POWER SWITCH (0x0700) — |
|
| Kev Ruaj Ntseg 2 (S2) hais kom ua chav kawm (VI) | Tsis ruaj ntseg |
| Rau S2 kev ruaj ntseg | |
| Supervision command class (VI) | Tsis ruaj ntseg |
| Rau daim ntawv thov-theem xa ntawv lees paub | |
| Tsheb thauj mus los kev pab hais kom ua chav kawm ( | Tsis ruaj ntseg |
| Rau thauj fragmented Z-Wave datagrams | |
Kev teeb tsa
| Parameter tooj | Parameter npe | Loj hauv Bytes | Chav tsev | Kev daws teeb meem | Tus nqi qis | Tus nqi siab tshaj | Default tus nqi |
| 1 | Pab kom Fail-safe timer | 1 | 0 | 255 | 0 | ||
| 0 = Diable tsis muaj kev nyab xeeb timer, 1 txog 255 = Pab kom tsis txhob muaj kev nyab xeeb timer | |||||||
| 2 | Ntsuas ntsuas kub | 2 | °C ° F |
0 | 255 | 0 | |
| °C = 0 rau 127: °F = 128 rau 255′ Nco tseg: Ntawm txhua qhov ntsuas kev hloov pauv config tsis 3 txog 5 yuav raug teeb tsa rau lawv qhov tseem ceeb. |
|||||||
| 3 | Kev qhia txog qhov kub thiab txias | 2 | Sec | 1 | 30 | 65534 | 30 |
| Configuration ntawm lub sij hawm rau lub sij hawm puag kub qhia Nco tseg: Tus nqi 30 txhais tau hais tias lub sij hawm lub hauv paus tempe kev qhia paub tab yog neeg xiam. |
|||||||
| 4 | Delta configuration kub qhia | 2 | 'C •F |
0.1 'C 0.1 ° F |
0 | 100 $00 |
0 |
| Configuration ntawm delta kub rau qhov kub thiab txias e qhia Ceeb toom: Tus nqi 0 txhais tau hais tias delta kub qhia yog neeg xiam | |||||||
| 5 | Temperature Cutoff | 2 | °C *F |
0.1 • C 0.1 ° F |
1
320 |
1000 2120 |
0 |
| Nco tseg: Tus nqi 0 txhais tau hais tias Txiav tawm qhov kub thiab txias tsis ua haujlwm | |||||||
Nco tseg: 1. Kev teeb tsa tus nqi tawm ntawm qhov ntau yuav tsis raug lees txais thiab tsis muaj kev cuam tshuam ntawm cov txiaj ntsig ntawm kev teeb tsa yav dhau los, 2. Tsis muaj 2 txog 5 tsuas yog muaj thaum lub ntsuas kub sab nraud txuas nrog.
Kev Pabcuam thiab Kho
SIR tsis yog neeg siv-kev pabcuam. Thov tsis txhob dismantle lub tsev. Nyob rau hauv qhov tsis zoo tshwm sim ntawm qhov ua txhaum, thov hu rau tus kws kho cua sov lossis tus kws tshaj lij hluav taws xob tsim nyog.
Technical specifications
Hluav taws xob
| Lub hom phiaj ntawm kev tswj hwm | Electronic timer (yooj yim mounted) |
| Tiv tauj ntaus nqi | 13A resistive * |
| Tswj hom | 230VAC, haum rau loads txog 3kW |
| Kev muab khoom | Micro-disconnection |
| Tswj kev nqis tes ua | 230V AC, 50Hz nkaus xwb |
| Lub sijhawm ua haujlwm | Hom 2B |
| txwv | Sib nrug |
| Chav kawm software | Chav Kawm A |
| Lub sijhawm raug | (+5 Oo) |
| Timer boost lub sijhawm | Qauv SIR 321 - 30/60/120 feeb, 1 feeb mus rau 24 teev ntawm Z-Wave |
| Sensor temp. raug | 10.5 ° C ntawm 0 ° C mus rau 65 ° C thiab 11 ° C ntawm 66 ° C txog 100 ° C (yeem xaiv sab nraud rau SIR 321) |
| Sensor temp. ntau | 0 ° C txog 100 ° C (yeem xaiv sab nraud sojntsuam rau SIR 321) |
| Ua haujlwm zaus | 868 MHz |
* xaiv tau 3A inductive
Neeg kho tshuab
| Qhov ntev | 85 x 85 x 19 mm (flush mount), 85 x 85 x 44 mm (nto mount) |
| Case khoom | Thermoplastic, nplaim hluav taws |
| Pob siab ntsuas kub | 75 ° C |
| Mounting | Ib leeg-gang nto mount / flush lub thawv, qhov tob 25 hli (UK) / 35 hli (Continental Europe) |
Ib puag ncig
| Impulse voltage kev ntaus nqi | Cat II 2500V |
| Tiv thaiv kev tiv thaiv | IP 30 |
| Pollution degree | Qib 2 |
| Kev khiav hauj lwm qhov kub thiab txias | 0 ° C txog 35 ° C |
Ua raws
| Tus qauv tsim qauv | EN 60730-2-7, RoHS2, € € liab TS EN 300-220 TS EN 301-489 |
Ordering cov ntaub ntawv
SIR 321 RF Z-Wave variant, 30 mus rau 120-feeb countdown timer nrog ib lub laub khawm ua haujlwm thiab 1-feeb mus rau 24-teev timer dhau RF. LED qhov taw qhia teeb. Haum rau kev thauj khoom mus txog 3kW ntawm 230V AC.
SIR 321 yog qhov tsim nyog rau nruab rau hom duab lossis lwm yam zoo sib xws ntawm phab ntsa laib / nraub qaum.
Xaiv cov khoom siv ntxiv: SES 001 sab nraud ntsuas kub.
Nco tseg:
European Muag Khoom
Secure Meters (Sweden) AB
Box 1006 SE-611 29 Nykoping Sweden
Xov tooj: +46 155 775 00
Fax: + 46 155 775 97
e-mail: muag Europe@securemeters.com
www.cewesecure.se
European Head Office
Secure Meters (UK) Limited
South Bristol Business Park,
Roman Farm Road, Bristol BS4 1UP
BGX501-867
Cov ntaub ntawv / Cov ntaub ntawv
 |
TSEEM CEEB RF Countdown Timer SIR 321 [ua pdf] Tus neeg siv phau ntawv Kev ruaj ntseg, RF, Countdown, Timer, SIR 321 |
