Pymeter PY-20TT Digital Temperature Controller

TshajVIEW

Cov Lus Qhia Tseem Ceeb

1. Tus neeg sau xov xwm: nyob rau hauv hom kev ua hauj lwm, tso saib sensor 1 Kub; nyob rau hauv lub teeb hom, tso saib cov ntawv qhia zaub mov code.
2. SV: nyob rau hauv hom kev ua hauj lwm, tso saib sensor 2 Kub; nyob rau hauv hom kev teeb tsa, tso saib tus nqi.
3. SET tus yuam sij: nias tus yuam sij SET rau 3 vib nas this kom nkag mus rau qhov chaw.
4. SAV key: Thaum lub sijhawm teeb tsa, nias tus yuam sij SAV kom txuag thiab tawm ntawm qhov chaw.
5. INCREASE tus yuam sij: nyob rau hauv hom kev teeb tsa, nias tus yuam sij INCREASE kom nce tus nqi.
6. DECREASE qhov tseem ceeb: nyob rau hauv hom kev teeb tsa, nias tus yuam sij DECREASE kom txo tus nqi.
7. Qhov taw qhia 1: lub teeb yog qhib thaum lub qhov hluav taws xob 1 qhib.
8. Qhov taw qhia 2: lub teeb yog qhib thaum lub qhov hluav taws xob 2 qhib.
9. LED 1-L: lub teeb yog nyob rau yog lub qhov hluav taws xob 1 yog teem rau cua sov.
10. LED 1-R: lub teeb yog nyob rau yog tias lub qhov hluav taws xob 1 yog teem rau cua txias.
11. LED 2-L: lub teeb yog nyob rau yog lub qhov hluav taws xob 2 yog teem rau cua sov.
12. LED 2-R: lub teeb yog nyob rau yog tias lub qhov hluav taws xob 2 yog teem rau cua txias.

Kev qhia kev teeb tsa

Thaum tus maub los yog powered rau los yog ua hauj lwm, nias lub SET yuam sij ntau tshaj 3 vib nas this kom nkag mus rau qhov chaw hom, PV qhov rais qhia thawj cov ntawv qhia zaub mov code "CF", thaum SV qhov rais qhia raws li cov nqi teev. Nias tus yuam sij SET mus rau cov ntawv qhia zaub mov tom ntej, thiab nias tus yuam sij INCREASE lossis DECREASE tus yuam sij los teeb tsa tus nqi tam sim no. Rau kev teeb tsa yooj yim, tsuas yog yuav tsum tau teeb tsa tus nqi rau CF, 1on, 1oF, 2on, thiab 2oF. C thiab F yog cov ntsuas kub; 1on / 2on yog ONpoint temp (pib / tig rau temp); 1oF / 2oF yog OFF-point temp (stop / tig tawm temp), lawv kuj yog lub hom phiaj temps. Tom qab teeb tsa tiav lawm, nias tus yuam sij SAV kom txuag tau qhov chaw thiab rov qab mus rau qhov ntsuas kub zoo li qub. Thaum lub sijhawm teeb tsa, yog tias tsis muaj kev ua haujlwm rau 30 vib nas this, lub kaw lus yuav txuag tau qhov chaw thiab rov qab mus rau qhov ntsuas kub ib txwm muaj.

Siv rau cov khoom siv cua sov

1. Rau cov cuab yeej cua sov, tig ON ntawm Tsawg temp thiab tig OFF ntawm High temp. YUAV TSUM ON-point Temp < (qis dua) OFF-point Temp; Nws yuav tsis ua haujlwm zoo rau cua sov yog tias teem rau ON-point Temp > MOFF-point Temp.
2. Tom qab ntsaws rau hauv, yog tias qhov ntsuas kub tam sim no qis dua lub hom phiaj temp (OFFpoint), qhov hluav taws xob tig rau cua sov kom txog thaum kub ncav cuag OFF-point.
3. Tom qab lub tshuab cua sov tau muab tua lawm, lub temp yuav pib poob rau hauv qhov chaw txias, qhov hluav taws xob yuav tsis tig mus txog thaum temp ncav cuag ONpoint.

Siv rau cov khoom cua txias

1. Rau cov khoom siv cua txias, tig ON ntawm High temp thiab tig OFF ntawm Tsawg temp. YUAV TSUM ON-point Temp > (siab dua) OFF-point Temp; Nws yuav tsis ua haujlwm kom txias yog tias teeb tsa ON-point Temp < = OFF-point Temp.
2. Tom qab ntsaws rau hauv, yog tias qhov ntsuas kub tam sim no siab dua lub hom phiaj temp (OFFpoint), qhov hluav taws xob tig rau kom txias kom txog thaum kub ncav cuag OFF-point.
3. Tom qab lub tshuab cua txias kaw lawm, lub ntsuas kub yuav pib sawv hauv qhov chaw kub, qhov hluav taws xob yuav tsis tig mus txog thaum temp ncav cuag ON-point.

Nco tseg

1. Tsis muaj tus maub los ua kom temp ib txwm nyob ntawm lub hom phiaj, kom qis qis ntawm qhov ntsuas kub, thov teem ON-point ze rau OFF-point (lub hom phiaj temp).
2. Txhua qhov hluav taws xob txhawb cua sov / cua txias hom.

Teeb Dhuav Daim Ntawv

Lub ntsiab nta

• Tsim nrog kev ywj pheej dual qhov hluav taws xob;
• Dual Relays, muaj peev xwm tswj tau ob qho tib si cua sov thiab cua txias tib lub sijhawm, lossis tswj nyias;
• Dual Waterproof Sensors, tig cov cuab yeej rau thiab tawm ntawm qhov xav tau kub, yooj yim heev thiab siv tau yooj yim;
• Celsius lossis Fahrenheit Nyeem-tawm;
• Dual LED Zaub, nyeem qhov kub ntawm 2 sensors;
• Lub tswb nrov thiab qis qis;
• Lub tswb ntsuas kub sib txawv;
• Fais fab-on Ncua, tiv thaiv cov khoom tso tawm los ntawm kev qhib / tawm ntau dhau;
• Kub Calibration;
• Cov chaw khaws cia txawm tias thaum fais fab tuag.

Specification

MENU Kev Qhia

Nco ntsoov: Tsis txhob muab piv rau ib lub ntsuas kub tsis raug lossis cov phom kub! Thov Calibrate nrog cov dej khov dej sib tov (0 ℃ / 32 ℉) yog tias tsim nyog!

Lus ceeb toom: Buzzer yuav tswb nrog lub suab "bi-bi-bi" kom txog thaum qhov kub thiab txias rov qab mus rau qhov qub lossis ib qho tseem ceeb raug nias; "EEE" tso tawm rau ntawm PV / SV qhov rai nrog lub tswb "bi-bi-bi" yog tias lub sensor yog qhov txhaum.

Tsawg Kub Tswb Tswb (d7): (Ex ibample) yog teem d7 txog 5 ° C, thaum qhov kub sib txawv ntawm sensor 1 thiab sensor 2 yog tshaj 5 ° C, nws yuav tswb nrog lub suab "bi-bibiii".

Fais Fab-Ncua Sijhawm (P7): (Ex ibample) yog teem P7 rau 1 min, qhov hluav taws xob yuav tsis tig mus txog 1 min suav txij li lub hwj chim kawg.

Yuav ntsuas Calibrate Li Cas?

• Soak cov kev sojntsuam tag nrho rau hauv cov dej khov-dej sib tov, qhov ntsuas kub yuav tsum yog 0 ℃ / 32 ℉, yog tias qhov ntsuas kub tsis tau nyeem, offset (+-) qhov txawv ntawm qhov chaw - C1 / C2, txuag, thiab tawm.

Kev them nyiaj yug thiab Warranty

Pyrometer cov khoom yog muab nrog Lifetime Warranty thiab Technical Support.

Muaj lus nug / teeb meem, thov koj xav tiv tauj peb txhua lub sijhawm ntawm www.pymeter.com or Email support@pymeter.com.

• Tus Neeg Siv Phau Ntawv Qhia PDF
• Kev them nyiaj yug LiveChat

Cov ntaub ntawv / Cov ntaub ntawv

Pymeter PY-20TT Digital Temperature Controller [ua pdf] Phau ntawv qhia PY-20TT, Digital Temperature Controller, PY-20TT Digital Temperature Controller

Cov ntaub ntawv

• Cov neeg siv phau ntawv