Pymeter PY-20TT Digital Temperature Controller

FEELAVIEW

Litaelo Taeo

1. Motlalehi: tlas'a mokhoa oa ho sebetsa, bonts'a sensor 1 Mocheso; tlas'a mokhoa oa ho seta, hlahisa khoutu ea menu.
2. SV: tlas'a mokhoa oa ho sebetsa, bonts'a sensor 2 Mocheso; tlas'a mokhoa oa ho seta, bonts'a boleng ba ho seta.
3. SET senotlolo: tobetsa konopo ea SET metsotsoana e 3 ho kenya litlhophiso.
4. Senotlolo sa SAV: nakong ea ts'ebetso ea ho seta, tobetsa konopo ea SAV ho boloka le ho tsoa ho seta.
5. KONOLO EA HO ETSA: tlas'a mokhoa oa ho seta, tobetsa konopo ea INCREASE ho eketsa boleng.
6. Fokotsa senotlolo: tlas'a mokhoa oa ho beha, tobetsa konopo ea DECREASE ho fokotsa boleng.
7. Letšoao la 1: mabone a teng ha outlet 1 e butswe.
8. Letšoao la 2: mabone a teng ha outlet 2 e butswe.
9. LED1-L: lebone le khantšitsoe haeba phallo ea 1 e etselitsoe HEATING.
10. LED1-R: lebone le khantšitsoe haeba outlet 1 e setetsoe bakeng sa COOLING.
11. LED2-L: lebone le khantšitsoe haeba phallo ea 2 e etselitsoe HEATING.
12. LED2-R: lebone le khantšitsoe haeba outlet 2 e setetsoe bakeng sa COOLING.

Taelo ea ho seta

Ha molaoli a buletsoe kapa a sebetsa, tobetsa konopo ea SET bakeng sa metsotsoana e fetang 3 ho kenya mokhoa oa ho beha, fensetere ea PV e bonts'a khoutu ea pele ea menu "CF", ha fensetere ea SV e bontša ho latela boleng bo behiloeng. Tobetsa konopo ea SET ho ea ho menu e latelang, 'me u tobetse konopo ea INCREASE kapa DECREASE ho beha boleng ba parameter ea hona joale. Bakeng sa ho seta ha bonolo, o hloka feela ho beha boleng ba CF, 1on, 1oF, 2on, le 2oF. C le F ke likarolo tsa nako; 1on/2on ke ONpoint temp(ho qala/bulela mocheso); 1oF/2oF ke thempereichara e OFF-point(ho emisa/ho tima), hape ke nako eo ho shebiloeng ho eona. Kamora hore ho seta ho etswe, tobetsa konopo ya SAV ho boloka di-setting le ho kgutlela mokgweng o tlwaelehileng wa pontsho ya mocheso. Nakong ea ho seta, haeba ho se na ts'ebetso ea metsotsoana e 30, sistimi e tla boloka li-setting ebe e khutlela mokhoeng o tloaelehileng oa ho bonts'a mocheso.

Sebelisa bakeng sa sesebelisoa sa ho futhumatsa

1. Bakeng sa sesebelisoa sa ho futhumatsa, BUA ka Mocheso o Tlase 'me o TSHOE ka Mocheso o Holimo. LOKELA ho beha ON-point Temp < (tlase ho feta) OFF-point Temp; E KE KE E sebetsa hantle bakeng sa ho futhumatsa haeba e setiloe ON-point Temp > MOFF-point Temp.
2. Kamora ho hokela, haeba thempereichara ea hajoale e le ka tlase ho mocheso o reriloeng (OFFpoint), li-output li bula ho futhumatsa ho fihlela mocheso o fihla OFF-point.
3. Kamora hore sesebelisoa sa ho futhumatsa se tingoe, mocheso o tla oela sebakeng se batang, libaka tsa ho futhumatsa li ke ke tsa buleha ho fihlela mocheso o fihla ONpoint.

Sebelisa bakeng sa sesebelisoa sa ho pholisa

1. Bakeng sa lisebelisoa tse pholileng, BULELA ka Mocheso o Holimo 'me o TSHOE ka mocheso o tlase. LOKELA ho beha ON-point Temp > (e phahameng ho feta) OFF-point Temp; E ke ke ea sebetsa hantle bakeng sa ho pholisa haeba e behiloe ON-point Temp <= OFF-point Temp.
2. Ka mor'a ho kenya, haeba mocheso oa hona joale o le holimo ho feta tempe e reriloeng (OFFpoint), li-output li bula hore li pholile ho fihlela mocheso o fihla OFF-point.
3. Kamora hore sesebelisoa sa pholileng se tingoe, mocheso o tla phahama sebakeng se chesang, libaka tsa marang-rang li ke ke tsa buleha ho fihlela mocheso o fihla ON-point.

Hlokomela

1. Ha ho na molaoli ea ka bolokang mocheso ka linako tsohle, ho fokotsa mocheso, ka kopo, beha ON-point haufi le OFF-point(target temp).
2. Sehlahisoa se seng le se seng se tšehetsa mokhoa oa ho futhumatsa / o pholileng.

Chate ea Phallo ea Phallo

Likarolo tse ka Sehloohong

• E entsoe ka libaka tse peli tse ikemetseng;
• Li-Relay tse peli, tse khonang ho laola lisebelisoa tse futhumatsang le tse futhumatsang ka nako e le 'ngoe, kapa ho laola ka thoko;
• Li-sensor tse sa keneleng metsi tse peli, bulela le ho tima lisebelisoa ka mocheso o lakatsehang, ho bonolo haholo ebile ho bonolo ho li sebelisa;
• Celsius kapa Fahrenheit Read-out;
• Pontšo ea LED e habeli, mocheso o balang ho tsoa ho li-sensor tse 2;
• Alamo e Phahameng le e Tlase ea Mocheso;
• Alamo ea Phapano ea Mocheso;
• Ho lieha ha Power-on, sireletsa lisebelisoa tse tsoang ho toggle ea ho tima / ho tima;
• Tekanyo ea Mocheso;
• Litlhophiso lia bolokoa le ha motlakase o tingoe.

Tlhaloso

Menu Taelo

Tlhokomeliso: Se ke oa e bapisa le thermometer e tloaelehileng e sa nepahalang kapa sethunya sa temp! Ka kopo, Lekanya ka motsoako oa metsi a leqhoa (0℃/32℉) ha ho hlokahala!

Maikutlo: Buzzer e tla lla ka molumo oa "bi-bi-bi" ho fihlela mocheso o khutlela sebakeng se tloaelehileng kapa konopo efe kapa efe e hatelloa; "EEE" e hlahisoa fensetereng ea PV/SV ka alamo ea "bi-bi-bi" haeba sensor e le phoso.

Phapang ea Mocheso Alarm (d7): (Example) haeba e behiloe d7 ho 5 ° C, ha phapang ea mocheso pakeng tsa sensor 1 le sensor 2 e feta 5 ° C, e tla lla ka molumo "bi-bibiii".

Ho lieha ha Power-On (P7): (Example) ha e setiloe P7 ho isa ho 1 min, mabenkele a ke ke a buleha ho fihlela motsotso o le mong o balla morao ho tloha ha motlakase o tima.

U ka lekanyetsa mocheso joang?

• Kenya li-probes ka botlalo ka har'a motsoako oa metsi a leqhoa, mocheso oa 'nete e lokela ho ba 0℃/32℉, haeba mocheso oa ho bala o se joalo, tlosa (+-) phapang ho Setting - C1/C2, boloka, 'me u tsoe.

Tšehetso le Warranty

Lihlahisoa tsa pyrometer li fanoa ka Warranty ea Lifetime le Tšehetso ea Theknoloji.

Lipotso / bothata bofe kapa bofe, ka kopo ikutloe u lokolohile ho ikopanya le rona nako efe kapa efe ho www.pymeter.com or Email support@pymeter.com.

• Buka ea mosebelisi PDF
• Tšehetso ea LiveChat

Litokomane / Lisebelisoa

Pymeter PY-20TT Digital Temperature Controller [pdf] Buka ea Taelo PY-20TT, Taolo ea Mocheso oa Dijithale, PY-20TT Digital Temperature Controller

Litšupiso

• Bukana ea Mosebelisi