BAGGEBO

Important Safety Information

WARNING!

Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.

Screw(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instructions carefully.

(Safety warnings are also provided in multiple other languages.)

Parts Included

The following parts are included in the package:

• 2x Part 106940 (long screw/bolt)
• 8x Part 100229 (screw)
• 1x Part 101339 (wooden dowel)
• 9x Part 101345 (wooden dowel)
• 2x Part 100481 (cam lock screw)
• 4x Part 103430 (cam lock)
• 2x Part 119252 (cam lock)
• 1x Part 109041 (screw)
• 2x Part 100823 (washer)
• 6x Part 122628 (foot/base piece)
• 1x Part 105493 (plastic bracket/clip)
• 1x Part 100006 (Allen key)
• 1x Bag of nails (Part 319503)
• 1x Wall attachment bracket (Part 106989)

Assembly Steps

Step 1: Prepare Side Panels

Insert one wooden dowel (101339) into the pre-drilled hole on one of the side panels. Ensure it is fully inserted.

Step 2: Attach Cam Lock Screws

Screw two cam lock screws (106940) into the designated holes on another panel.

Step 3: Insert Cam Locks

Insert two cam locks (103430) into the larger holes on the panel from Step 2. Ensure the arrow on the cam lock points towards the entry hole for the cam lock screw.

Step 4: Connect Panels

Align the panel with the cam lock screws (from Step 2) with the panel containing the dowel (from Step 1). Push them together.

Step 5: Secure Panels with Cam Locks

Turn the cam locks (103430) clockwise using a screwdriver to secure the connected panels. Repeat for the second set of cam locks.

Step 6: Insert More Dowels

Insert five wooden dowels (101345) into the designated holes on the assembled structure.

Step 7: Attach Wall Bracket

Attach the wall attachment bracket (106989) to the top of the unit using one screw (109041) and one washer (100823).

Step 8: Attach Cam Lock Screws

Insert two cam lock screws (100481) into the designated holes on another panel.

Step 9: Insert More Dowels

Insert four wooden dowels (101345) into the designated holes on the panel from Step 8.

Step 10: Connect Panels

Align the panel from Step 8 with the main structure and push them together.

Step 11: Secure with Cam Locks

Insert two cam locks (119252) into the larger holes on the connected panel and turn them clockwise to secure.

Step 12: Connect More Panels

Align another panel with the structure and push it into place.

Step 13: Secure with Screws

Insert four screws (100229) using the Allen key (100006) to secure the panel.

Step 14: Connect Final Panel

Align the last panel with the structure and push it into place.

Step 15: Secure Final Panel

Insert four screws (100229) to secure the last panel.

Step 16: Attach Back Panel

Place the back panel into the grooves. Secure the back panel using 14 small nails (105494) and a hammer. Ensure the panel is flush.

Step 17: Attach Feet

Attach six feet/base pieces (122628) to the bottom of the unit using a hammer.

Step 18: Final Wall Attachment

Attach the wall attachment bracket (106989) to the unit using one screw (100823). This bracket is used to secure the furniture to the wall using appropriate wall fixings (not included).