AOC Q32P2CA LCD Computer Saib
Cov ntaub ntawv khoom
Specifications
- Qauv: qw 32p2
- Chaw tsim tshuaj paus: AOC
- Webqhov chaw: www.aoc.com ua
Cov lus qhia siv khoom
Kev nyab xeeb
- Lub monitor yuav tsum tau ua haujlwm tsuas yog los ntawm hom fais fab uas tau teev tseg rau ntawm daim ntawv lo. Yog tias koj tsis paub meej txog hom fais fab uas muab rau koj lub tsev, sab laj nrog koj tus neeg muag khoom lossis lub tuam txhab hluav taws xob hauv zos.
- Tus saib yog nruab nrog peb-pronged grounded plug, plug nrog ib tug thib peb (grounding) tus pin. Cov ntsaws no tsuas yog haum rau hauv lub qhov hluav taws xob hauv av raws li kev nyab xeeb. Yog tias koj lub qhov hluav taws xob tsis haum rau peb-xaim ntsaws, muaj ib tus kws kho hluav taws xob nruab lub qhov hluav taws xob kom raug, lossis siv lub adapter rau hauv av kom ruaj ntseg. Tsis txhob kov yeej lub hom phiaj kev nyab xeeb ntawm lub hauv paus ntsaws.
- Unplug lub tsev thaum muaj cua daj cua dub lossis thaum nws yuav tsis siv rau lub sijhawm ntev. Qhov no yuav tiv thaiv lub monitor los ntawm kev puas tsuaj vim lub zog surges.
- Tsis txhob overload hwj chim strips thiab extension cords. Overloading tuaj yeem ua rau hluav taws kub lossis hluav taws xob poob. Txhawm rau ua kom muaj kev ua haujlwm txaus siab, siv lub monitor tsuas yog nrog UL teev cov khoos phis tawj uas muaj cov khoom tsim nyog tsim nyog cim ntawm 100-240V AC, Min. 5 A. Lub qhov (socket) phab ntsa yuav tsum tau muab tso rau ze ntawm cov khoom siv thiab yuav tsum tau yooj yim nkag mus.
Kev teeb tsa
- Tsis txhob tso lub monitor rau ntawm lub laub tsis ruaj khov, sawv ntsug, tripod, bracket, lossis rooj. Yog tias lub monitor ntog, nws tuaj yeem ua rau tus neeg raug mob thiab ua rau muaj kev puas tsuaj loj rau cov khoom no. Tsuas yog siv lub laub, sawv ntsug, tripod, bracket, lossis rooj pom zoo los ntawm cov chaw tsim khoom lossis muag nrog cov khoom no. Ua raws li cov chaw tsim khoom cov lus qhia thaum txhim kho cov khoom thiab siv cov khoom siv mounting pom zoo los ntawm cov chaw tsim khoom. Ib qho khoom siv thiab lub laub ua ke yuav tsum tau txav mus nrog kev saib xyuas.
- Tsis txhob thawb ib yam khoom rau hauv lub qhov ntawm lub txee saib. Nws tuaj yeem ua rau cov khoom siv hluav taws xob puas ua rau hluav taws kub lossis hluav taws xob poob. Tsis txhob nchuav kua rau ntawm lub monitor.
- Tsis txhob muab cov khoom tso rau pem hauv ntej.
- Yog tias koj mount lub monitor rau ntawm phab ntsa lossis txee, siv cov khoom siv mounting pom zoo los ntawm cov chaw tsim khoom thiab ua raws li cov lus qhia ntawm cov khoom siv.
- Cia qee qhov chaw nyob ib ncig ntawm lub monitor raws li qhia hauv qab no. Txwv tsis pub, huab cua ncig yuav ua tsis tiav vim li no overheating yuav ua rau hluav taws kub los yog puas rau lub monitor.
- Kom tsis txhob muaj kev puas tsuaj, rau example, lub vaj huam sib luag tev tawm ntawm lub bezel, xyuas kom meej tias lub monitor tsis qaij qis qis dua -5 degrees. Yog tias -5 degree downward qaij lub kaum sab xis siab tshaj, qhov kev saib xyuas kev puas tsuaj yuav tsis raug them raws li warranty.
Pom zoo qhov chaw cua
- Mounted nrog sawv ntsug: 12 nti (30 cm)
- Sab saum toj: 4 nti (10 cm)
- Hauv qab: 4 nti (10 cm)
- Sab laug: 4 nti (10 cm)
- Txoj cai: 4 nti (10 cm)
Ntxuav
- Ntxuav lub txee tsis tu ncua nrog ntaub. Koj tuaj yeem siv cov tshuaj ntxuav muag los so tawm cov stain, es tsis txhob muaj cov tshuaj ntxuav tes uas yuav ua rau cov khoom txee.
FAQ
- Q: Kuv puas tuaj yeem siv lub ntsuas hluav taws xob nrog ib qho twg?
A: Tsis yog, tus saib yuav tsum tsuas yog ua los ntawm hom fais fab uas tau teev tseg rau ntawm daim ntawv lo. Yog tias koj tsis paub meej, nrog koj tus neeg muag khoom lossis lub tuam txhab hluav taws xob hauv zos. - Q: Kuv puas tuaj yeem txuas lub monitor ntawm ib qho chaw?
A: Tsis yog, koj tsuas yog yuav tsum siv lub laub, sawv ntsug, tripod, bracket, lossis rooj pom zoo los ntawm cov chaw tsim khoom lossis muag nrog cov khoom no. Ua raws li cov chaw tsim khoom cov lus qhia thaum txhim kho cov khoom thiab siv cov khoom siv txuas ntxiv tau pom zoo. - Q: Kuv yuav ntxuav lub monitor li cas?
A: Ntxuav lub txee tsis tu ncua nrog ib daim ntaub. Koj tuaj yeem siv cov tshuaj ntxuav muag kom tshem tawm cov stains, tab sis tsis txhob siv cov tshuaj ntxuav tes kom zoo vim nws yuav ua rau cov khoom lag luam puas.
- www.aoc.com ua
© 2020 TSO. Tag nrho cov cai qhaib
Kev nyab xeeb
National Conventions
Cov ntu ntu hauv qab no piav qhia txog cov lus pom zoo uas siv hauv daim ntawv no.
Lus ceeb toom, ceeb toom, thiab ceeb toom
- Thoob plaws hauv phau ntawv qhia no, cov ntawv blocks tuaj yeem nrog lub cim thiab luam tawm hauv hom ntawv bold lossis hom ntawv italic. Cov blocks no yog sau ntawv, ceeb toom, thiab ceeb toom, thiab lawv tau siv raws li hauv qab no:
CEEB TOOM: CEEB TOOM qhia txog cov ntaub ntawv tseem ceeb uas pab koj siv koj lub computer zoo dua.
CEEB TOOM:CEEB TOOM qhia txog kev puas tsuaj rau kho vajtse lossis cov ntaub ntawv poob thiab qhia koj yuav ua li cas kom tsis txhob muaj teeb meem.
CEEB TOOM: CEEB TOOM qhia txog qhov ua rau lub cev raug mob thiab qhia koj yuav ua li cas kom tsis txhob muaj teeb meem. Qee cov lus ceeb toom yuav tshwm sim hauv lwm hom ntawv thiab tej zaum yuav tsis nrog lub cim. Hauv cov xwm txheej zoo li no, kev nthuav qhia tshwj xeeb ntawm cov lus ceeb toom raug yuam los ntawm txoj cai tswjfwm.
Hwj chim
- Lub monitor yuav tsum tau ua haujlwm tsuas yog los ntawm hom fais fab uas tau teev tseg rau ntawm daim ntawv lo. Yog tias koj tsis paub meej txog hom fais fab uas muab rau koj lub tsev, sab laj nrog koj tus neeg muag khoom lossis lub tuam txhab hluav taws xob hauv zos.
- Tus saib yog nruab nrog peb-pronged grounded plug, plug nrog ib tug thib peb (grounding) tus pin. Cov ntsaws no tsuas yog haum rau hauv lub qhov hluav taws xob hauv av raws li kev nyab xeeb. Yog tias koj lub qhov hluav taws xob tsis haum rau peb-xaim ntsaws, muaj ib tus kws kho hluav taws xob nruab lub qhov hluav taws xob kom raug, lossis siv lub adapter rau hauv av kom ruaj ntseg. Tsis txhob kov yeej lub hom phiaj kev nyab xeeb ntawm lub hauv paus ntsaws.
- Unplug lub tsev thaum muaj cua daj cua dub lossis thaum nws yuav tsis siv rau lub sijhawm ntev. Qhov no yuav tiv thaiv cov
saib xyuas los ntawm kev puas tsuaj vim muaj zog surges. - Tsis txhob overload hwj chim strips thiab extension cords. Overloading tuaj yeem ua rau hluav taws kub lossis hluav taws xob poob.
- Txhawm rau ua kom muaj kev ua haujlwm txaus siab, siv lub monitor tsuas yog nrog UL teev cov khoos phis tawj uas muaj cov khoom tsim nyog tsim nyog cim ntawm 100-240V AC, Min. 5 A.
- Lub qhov (socket) phab ntsa yuav tsum tau muab tso rau ze ntawm cov khoom siv thiab yuav tsum tau yooj yim nkag mus.
Kev teeb tsa
- Tsis txhob tso lub monitor rau ntawm lub laub tsis ruaj khov, sawv ntsug, tripod, bracket, lossis rooj. Yog tias lub monitor poob, nws tuaj yeem ua rau tus neeg raug mob thiab ua rau muaj kev puas tsuaj loj rau cov khoom no. Tsuas yog siv lub laub, sawv ntsug, tripod, bracket, lossis rooj pom zoo los ntawm cov chaw tsim khoom lossis muag nrog cov khoom no. Ua raws li cov chaw tsim khoom cov lus qhia thaum txhim kho cov khoom thiab siv cov khoom siv txuas ntxiv pom zoo los ntawm cov chaw tsim khoom. Ib qho khoom siv thiab lub laub ua ke yuav tsum tau txav mus nrog kev saib xyuas.
- Tsis txhob thawb ib yam khoom rau hauv lub qhov ntawm lub txee saib. Nws tuaj yeem ua rau cov khoom siv hluav taws xob puas ua rau hluav taws kub lossis hluav taws xob poob. Tsis txhob nchuav kua rau ntawm lub monitor.
- Tsis txhob muab cov khoom tso rau pem hauv ntej.
- Yog tias koj mount lub monitor rau ntawm phab ntsa lossis txee, siv cov khoom siv mounting pom zoo los ntawm cov chaw tsim khoom thiab ua raws li cov lus qhia ntawm cov khoom siv.
- Cia qee qhov chaw nyob ib ncig ntawm lub monitor raws li qhia hauv qab no. Txwv tsis pub, huab cua ncig yuav ua tsis tiav vim li no overheating yuav ua rau hluav taws kub los yog puas rau lub monitor.
- Kom tsis txhob muaj kev puas tsuaj, rau example lub vaj huam sib luag tev tawm ntawm lub bezel, xyuas kom meej tias lub monitor tsis qaij downward ntau tshaj -5 degrees. Yog tias -5 degree downward qaij lub kaum sab xis siab tshaj, qhov kev saib xyuas kev puas tsuaj yuav tsis raug them raws li warranty.
- Saib hauv qab no cov chaw ua pa pom zoo nyob ib ncig ntawm lub monitor thaum lub monitor raug ntsia rau ntawm phab ntsa lossis ntawm qhov muag:
Ntxuav
- Ntxuav lub txee tsis tu ncua nrog ntaub. Koj tuaj yeem siv cov tshuaj ntxuav muag los so tawm cov stain, es tsis txhob muaj cov tshuaj ntxuav tes uas yuav ua rau cov khoom txee.
- Thaum ntxuav, xyuas kom tsis txhob muaj cov tshuaj ntxuav tes nkag mus rau hauv cov khoom. Cov ntaub tu yuav tsum tsis txhob ntxhib dhau vim nws yuav khawb qhov screen.
- Thov disconnect lub hwj chim qaum ua ntej ntxuav cov khoom.
Lwm yam
- Yog hais tias cov khoom no emitting ib tug txawv txawv tsw, suab los yog pa luam yeeb, disconnect lub hwj chim plug tam sim ntawd thiab hu rau ib tug Service Center.
- Xyuas kom tseeb tias qhov qhib qhov cua tsis thaiv los ntawm lub rooj lossis ntaub thaiv.
- Tsis txhob koom nrog lub LCD saib hauv kev vibration hnyav lossis muaj kev cuam tshuam loj thaum lub sijhawm ua haujlwm.
- Tsis txhob khob lossis tso lub monitor thaum lub sijhawm ua haujlwm lossis kev thauj mus los.
- Lub thawv fais fab yuav tsum muaj kev nyab xeeb pom zoo. Rau lub teb chaws Yelemees, nws yuav tsum yog H03VV-F, 3G, 0.75 mm2, lossis zoo dua. Rau lwm lub tebchaws, cov hom tsim nyog yuav tsum siv raws li.
- Lub suab siab dhau ntawm lub pob ntseg thiab lub mloog pob ntseg tuaj yeem ua rau tsis hnov lus. Kev hloov ntawm qhov sib npaug ntawm qhov siab tshaj plaws nce lub pob ntseg thiab lub mloog pob ntseg tso zis voltage thiab yog li ntawd lub suab siab theem.
Teeb tsa
Cov ntsiab lus hauv Box
Tsis yog txhua lub teeb liab cables yuav muab rau txhua lub teb chaws thiab cheeb tsam. Thov kos nrog lub chaw muag khoom hauv zos lossis AOC ceg haujlwm kom paub meej.
Teeb tsa Stand & Base
Thov teeb lossis tshem tawm lub hauv paus raws li cov kauj ruam hauv qab no.
Teeb tsa
Tshem tawm
Kho Viewhauv Angle
- Rau qhov zoo viewing nws raug pom zoo kom saib tag nrho lub ntsej muag ntawm lub monitor, tom qab ntawd kho lub monitor lub kaum sab xis rau koj tus kheej nyiam.
- Tuav qhov muag kom koj tsis txhob kov lub monitor thaum koj hloov lub kaum sab xis ntawm lub monitor.
- Koj muaj peev xwm kho tus saib raws li hauv qab no
CEEB TOOM:
- Tsis txhob kov lub vijtsam LCD thaum koj hloov lub kaum sab xis. Nws yuav ua rau puas lossis tawg lub vijtsam LCD.
CEEB TOOM:
- Txhawm rau kom tsis txhob muaj kev puas tsuaj rau lub vijtsam, xws li kev tshem tawm vaj huam sib luag, xyuas kom meej tias lub monitor tsis qaij qis qis dua -5 degrees.
- Tsis txhob nias lub vijtsam thaum kho lub kaum sab xis ntawm lub monitor. tuav tsuas yog lub bezel.
Txuas lub Monitor
Kev sib txuas cable hauv qab ntawm Saib thiab Computer
- USB 3.2 Gen1 + them nyiaj
- USB 3.2 Gen1
- USB-PC (USB upstream)
- USB 3.2 Gen1
- Hwj chim
- HDMIx 2
- DP
- Pob ntseg
Txuas rau PC
- Txuas lub hwj huam qaum mus rau sab nraum qab ntawm cov zaub kom ruaj khov.
- Tua koj lub computer thiab unplug nws lub hwj chim cable.
- Txuas lub teeb liab teeb liab mus rau video connector nyob tom qab ntawm koj lub computer.
- Txuas lub hwj chim qaum ntawm koj lub computer thiab koj cov zaub rau hauv lub qhov hluav taws xob nyob ze.
- Qhib koj lub computer thiab tso saib.
Yog tias koj lub monitor pom cov duab, kev teeb tsa tiav. Yog tias nws tsis tso cov duab, thov mus saib Kev daws teeb meem. Txhawm rau tiv thaiv cov khoom siv, ib txwm tua lub PC thiab LCD saib ua ntej txuas.
Phab ntsa Mounting
Npaj rau Nruab Ib Qhov Kev Xaiv Phab Ntsa Mounting Arm.
Cov saib no tuaj yeem txuas rau phab ntsa mounting caj npab koj yuav nyias. Disconnect fais fab ua ntej qhov txheej txheem no. Ua raws li cov kauj ruam no:
- Tshem lub hauv paus.
- Ua raws li cov chaw tsim khoom cov lus qhia kom sib sau ua ke ntawm phab ntsa mounting caj npab.
- Muab phab ntsa mounting caj npab rau sab nraum qab ntawm lub monitor. Teem lub qhov ntawm caj npab nrog lub qhov nyob hauv qab ntawm lub monitor.
- Ntxig 4 screws rau hauv lub qhov thiab nruj.
- Reconnect cov kab. Xa mus rau tus neeg siv phau ntawv uas tuaj nrog cov kev xaiv phab ntsa mounting caj npab rau cov lus qhia ntawm kev txuas mus rau phab ntsa.
Sau tseg: VESA mounting ntsia hlau qhov tsis muaj rau txhua tus qauv, thov nrog tus neeg muag khoom lossis chaw ua haujlwm ntawm AOC.
Cov qauv tsim yuav txawv ntawm cov duab kos.
CEEB TOOM
- Txhawm rau kom tsis txhob muaj kev puas tsuaj rau lub vijtsam, xws li kev tshem tawm vaj huam sib luag, xyuas kom lub monitor tsis qaij qis qis dua - 5 degrees.
- Tsis txhob nias lub vijtsam thaum kho lub kaum sab xis ntawm lub monitor. tuav tsuas yog lub bezel.
Kho
Hotkeys
| 1 | Source/Exit |
| 2 | Lub zeem muag pom tseeb / |
| 3 | Volume/> |
| 4 | Menu/Enter |
| 5 | Hwj chim |
Hwj chim
Nias lub hwj chim yuam sij qhib / tawm lub monitor.
Ntawv qhia zaub mov / Xaiv
Qhib OSD ntawv qhia zaub mov lossis kev pom zoo hloov kho.
Volume / nce
Thaum OSD ntawv qhia zaub mov raug kaw, nias lub ">" tus yuam sij qhib lub ntim hloov bar, thiab nias lub "<" lossis ">" tus yuam sij los kho lub mloog pob ntseg tso zis ntim.
Source switching/exit
Thaum OSD cov ntawv qhia zaub mov raug kaw, nias tus yuam sij no txhawm rau qhib lub teeb liab qhov hloov pauv muaj nuj nqi, nias tus yuam sij no txuas ntxiv mus xaiv cov teeb liab uas tshwm sim hauv cov ntaub ntawv bar, thiab nias lub khawm ntawv qhia zaub mov kom hloov kho rau qhov chaw teeb liab xaiv. Thaum OSD cov ntawv qhia ua haujlwm, lub pob no ua raws li tus yuam sij tawm (kom tawm ntawm OSD ntawv qhia zaub mov)
Lub zeem muag ntshiab
- Thaum tsis muaj OSD, Nias lub "<" khawm kom qhib lub zeem muag pom tseeb.
- Siv cov "<" lossis ">" khawm los xaiv ntawm qhov tsis muaj zog, nruab nrab, muaj zog, lossis tawm teeb tsa. Default setting yog ib txwm "tawm".
- Nias thiab tuav "<" khawm rau 5 vib nas this kom qhib lub qhov muag pom kev pom tseeb, thiab cov lus ntawm "Clear Vision Demo: on" yuav tso tawm ntawm lub vijtsam rau 5 vib nas this. Nias Menu lossis Exit khawm, cov lus yuav ploj mus. Nias thiab tuav "<" khawm rau 5 vib nas this dua, Clear Vision Demo yuav tawm.
- Clear Vision muaj nuj nqi muab cov duab zoo tshaj plaws viewing kev paub los ntawm kev hloov cov kev daws teeb meem tsawg thiab cov duab tsis pom tseeb rau hauv cov duab meej thiab tiag tiag.
| Lub zeem muag ntshiab | Tawm | Kho lub zeem muag ntshiab |
| Tsis muaj zog | ||
| Nruab nrab | ||
| Muaj zog | ||
| Clear Vision Demo | On lossis Off | Disable lossis Enable Demo |
OSD Setting
Cov lus qhia yooj yim thiab yooj yim ntawm cov yuam sij tswj.
- Nias lub MENU-khawm kom qhib OSD qhov rais.
- Nias < los yog > mus rau hauv cov haujlwm. Thaum qhov xav tau muaj nuj nqi tseem ceeb, nias lub MENU-khawm kom qhib nws, nias < lossis> mus rau hauv cov ntawv qhia zaub mov ua haujlwm. Thaum qhov xav tau muaj nuj nqi tseem ceeb, nias MENU-khawm kom qhib nws.
- Nias <los yog> hloov qhov chaw ntawm cov haujlwm xaiv. Nias AUTO – khawm kom tawm. Yog tias koj xav kho lwm yam haujlwm, rov ua cov kauj ruam 2-3.
- OSD Lock Function: Txhawm rau txhawm rau OSD, nias thiab tuav lub MENU-khawm thaum lub monitor kaw thiab tom qab ntawd nias lub hwj huam khawm kom tig lub saib. Txhawm rau qhib OSD - nias thiab tuav lub MENU-khawm thaum lub saib kaw thiab tom qab ntawd nias lub hwj huam khawm kom tig lub saib.
Sau ntawv
- Yog tias cov khoom tsuas muaj ib lub teeb liab tawm tswv yim, cov khoom ntawm "Input Select" yog lov tes taw kho.
- Yog hais tias qhov screen loj ntawm cov khoom yog 4: 3 los yog cov tswv yim teeb liab daws teeb meem yog ib txwm daws teeb meem, ces cov khoom "Image Ratio" yog invalid.
- Plaub lub xeev ntawm ECO hom (tshwj tsis yog hom qauv), DCR, DCB hom thiab lub qhov rais highlight tsuas tuaj yeem tso saib ib lub xeev ntawm ib lub sijhawm.
Luminance
Nco tseg:
Thaum "HDR hom" yog teem rau lub xeev tsis-tawm, "Contrast", "Brightness Scene Mode", thiab "Gamma" cov khoom tsis tuaj yeem hloov kho.
Xim teeb
Nco tseg:
Thaum "HDR hom" nyob rau hauv "Brightness" yog teem rau lub xeev uas tsis yog-tawm, tag nrho cov khoom nyob rau hauv "Color Settings" hloov tsis tau.
Duab Boost
Nco tseg
- Rau qhov zoo dua viewnyob rau hauv kev, kho lub brightness, sib piv, thiab txoj hauj lwm ntawm lub brightening.
- Thaum lub "HDR hom" nyob rau hauv "Brightness" yog teem rau lub xeev uas tsis yog-tawm, tag nrho cov khoom nyob rau hauv "Qhov rai Brightening" yuav hloov tsis tau.
OSD Teeb
Kev Ua Si
Nco tseg
Thaum "HDR hom" nyob rau hauv "Brightness" yog teem rau lub xeev tsis-tawm, "Game Mode", "Tsub Field Control", thiab "Game Tone" cov khoom nyob rau hauv "Game Settings" tsis tuaj yeem hloov kho.
Ntxiv
Tawm
Qhov taw qhia LED
| xwm txheej | LED Xim |
| Tag Nrho Cov Hwj Huam | Dawb |
| Active-tawm hom | Txiv kab ntxwv |
Teeb meem
| Teeb meem & Lus nug | Kev daws teeb meem |
| Hwj chim LED Is Tsis yog ON | Xyuas kom tseeb tias lub hwj chim khawm yog ON thiab lub hwj chim Cord yog zoo txuas mus rau ib tug grounded hwj chim qhov hluav taws xob thiab lub monitor. |
| Tsis muaj duab on tus npo |
|
| Duab Is Fuzzy & Muaj Dab dab Duab ntxoov ntxoo Teeb meem |
|
| Duab thaws, Flickers Or Wave Qauv tshwm In Cov Duab |
|
| Saib xyuas Is Nkaum In Active Tawm- Hom” |
|
| ploj lawm ib of tus thawj xim (RED, Ntsuab, or BLUE) | Tshawb xyuas tus saib lub video cable thiab xyuas kom meej tias tsis muaj tus pin puas lawm. Xyuas kom tseeb tias tus saib lub video cable txuas nrog lub computer kom zoo. |
| Screen duab is tsis yog nyob nruab nrab or qhov loj kom raug | Kho H-Position thiab V-Position los yog nias kub-key (AUTO). |
| Duab muaj xim qhov tsis xws luag (dawb ua tsis yog saib dawb) | Kho RGB xim lossis xaiv xim kub uas xav tau. |
| Kab rov tav or ntsug kev cuam tshuam on tus npo | Siv Windows 7/8/10 shut-down hom los kho CLOCK thiab FOCUS. Nias kom kho nws tus kheej. |
| Kev cai & Kev pabcuam |
|
Specification
General Specification
| Vaj huam sib luag | Model npe | qw 32p2 | ||
| Tsav tsheb | TFT Xim LCD | |||
| ViewTau Duab Loj | 80.1cm kab pheeb ces kaum | |||
| Pixel suab | 0.2727mm (H) x 0.2727mm (V) | |||
| Lwm tus | Kab rov tav scan ntau yam | 30k-114kHz | ||
| Kab rov tav scan Size (Maximum) | 698.112 hli | |||
| Ntsuas ntsuas ntau yam | 48-75Hz | |||
| Vertical Scan Size (Maximum) | 392.688 hli | |||
| Max daws teeb meem | 2560 × 1440 @ 75Hz | |||
| Plug & Ua Si | VESA DDC2B/CI | |||
| Hwj chim Source | 100-240V~, 50/60Hz, 1.5A | |||
| Kev siv fais fab | Hom (Brightness = 90, Contrast = 50) | 35 W | ||
| Max. (brightness = 100, sib piv = 100) | ≤ 90W | |||
| Standby hom | ≤ 0.5W | |||
| Cov yam ntxwv ntawm lub cev | Cov khoom siv txuas | HDMI/DP/USB | ||
| USB |
|
|||
| Hom kab teeb liab | Detachable | |||
| Ib puag ncig | Kub | Kev khiav haujlwm | 0° ~ 40° | |
| Tsis ua haujlwm | -25° ~ 55° | |||
| Cov av noo | Kev khiav haujlwm | 10% ~ 85% (tsis-condensing) | ||
| Tsis ua haujlwm | 5% ~ 93% (tsis-condensing) | |||
| Qhov siab | Kev khiav haujlwm | 0 ~ 5000 m (0 ~ 16404ft) | ||
| Tsis ua haujlwm | 0 ~ 12192m (0 ~ 40000ft) | |||
Preset Display Hom
| STANDARD | RESOLUTION | HORIZONTAL FREQUENCY (kHz) | NTSUG FREQUENCY (Hz) |
| VGA | 640 × 480 @ 60Hz | 31.469 | 59.94 |
| 640 × 480 @ 72Hz | 37.861 | 72.809 | |
| 640 × 480 @ 75Hz | 37.5 | 75 | |
| SWVGA | 800 × 600 @ 56Hz | 35.156 | 56.25 |
| 800 × 600 @ 60Hz | 37.879 | 60.317 | |
| 800 × 600 @ 72Hz | 48.077 | 72.188 | |
| 800 × 600 @ 75Hz | 46.875 | 75 | |
| XGA | 1024 × 768 @ 60Hz | 48.363 | 60.004 |
| 1024 × 768 @ 70Hz | 56.476 | 70.069 | |
| 1024 × 768 @ 75Hz | 60.023 | 75.029 | |
| SXGA | 1280 × 1024 @ 60Hz | 63.981 | 60.02 |
| 1280 × 1024 @ 75Hz | 79.976 | 75.025 | |
| WXGA+ | 1440 × 900 @ 60Hz | 55.935 | 59.887 |
| 1440 × 900 @ 60Hz | 55.469 | 59.901 | |
| WSXGA | 1680 × 1050 @ 60Hz | 65.29 | 59.954 |
| 1680 × 1050 @ 60Hz | 64.674 | 59.883 | |
| FHD | 1920 × 1080 @ 60Hz | 67.5 | 60 |
| QHD | 2560 × 1440 @ 60Hz | 88.787 | 59.951 |
| QHD | 2560 × 1440 @ 75Hz | 66.636 | 74.968 |
| IBM MODES | |||
| DOS | 720 × 400 @ 70Hz | 31.469 | 70.087 |
| MAC MODES | |||
| VGA | 640 × 480 @ 67Hz | 35 | 66.667 |
| SWVGA | 832 × 624 @ 75Hz | 49.725 | 74.551 |
| XGA | 1024 × 768 @ 75Hz | 60.241 | 74.927 |
| VGA | 640 × 480 @ 67Hz | 35 | 66.667 |
| SWVGA | 832 × 624 @ 75Hz | 49.725 | 74.551 |
| XGA | 1024 × 768 @ 75Hz | 60.241 | 74.927 |
Tus Pin Txoj Haujlwm
- 19-Pin Xim Zaub Teeb Teeb Cable
| Pin Tsis muaj. | Teeb liab Lub npe | Pin Tsis muaj. | Teeb liab Lub npe | Pin Tsis muaj. | Teeb liab Lub npe |
| 1. | TMDS Cov Ntaub Ntawv 2+ | 9. | Cov ntaub ntawv TMDS 0- | 17. | DDC/CEC Av |
| 2. | TMDS Data 2 Shield | 10. | TMDS Moos + | 18. | + 5V lub zog |
| 3. | Cov ntaub ntawv TMDS 2- | 11. | TMDS Clock Shield | 19. | Kub Plug Ntes |
| 4. | TMDS Cov Ntaub Ntawv 1+ | 12. | TMDS Moos- | ||
| 5. | TMDS Cov Ntaub Ntawv 1Shield | 13. | CEC | ||
| 6. | Cov ntaub ntawv TMDS 1- | 14. | Reserved (NC ntawm lub cuab yeej) | ||
| 7. | TMDS Cov Ntaub Ntawv 0+ | 15. | SCL | ||
| 8. | TMDS Data 0 Shield | 16. | SDA |
20-Pin Xim Zaub Teeb Teeb Cable
| Pin Tsis muaj. | Teeb liab Lub npe | Pin Tsis muaj. | Teeb liab Lub npe |
| 1 | ML_Lane 3 (n) | 11 | GND |
| 2 | GND | 12 | ML_Lane 0 (p) |
| 3 | ML_Lane 3 (p) | 13 | CONFIG 1 |
| 4 | ML_Lane 2 (n) | 14 | CONFIG 2 |
| 5 | GND | 15 | AUX_CH (p) |
| 6 | ML_Lane 2 (p) | 16 | GND |
| 7 | ML_Lane 1 (n) | 17 | AUX_CH (n) |
| 8 | GND | 18 | Kub Plug Ntes |
| 9 | ML_Lane 1 (p) | 19 | Rov qab DP_PWR |
| 10 | ML_Lane 0 (n) | 20 | DP_PWR |
Plug thiab Ua Si
- Plug & Ua Si DDC2B Feature
- Lub monitor no tau nruab nrog VESA DDC2B peev xwm raws li VESA DDC STANDARD. Nws tso cai rau tus saib xyuas kom ceeb toom rau tus tswv tsev ntawm nws tus kheej thiab, nyob ntawm qib ntawm DDC siv, sib txuas lus ntxiv txog nws cov peev xwm tso saib.
- Lub DDC2B yog ob-txoj kev cov ntaub ntawv channel raws li I2C raws tu qauv. Tus tswv tsev tuaj yeem thov EDID cov ntaub ntawv hla DDC2B channel.
Cov ntaub ntawv / Cov ntaub ntawv
 |
AOC Q32P2CA LCD Computer Saib [ua pdf] Tus neeg siv phau ntawv Q32P2CA LCD Computer Monitor, Q32P2CA, LCD Computer Saib, Computer Saib, Monitor |
