Abubuwan da ke ciki
boye
AOC Q32P2CA LCD Mai Kula da Kwamfuta
Bayanin samfur
Ƙayyadaddun bayanai
- Samfura: Q32P2
- Mai ƙira: AOC
- Website: www.aoc.com
Umarnin Amfani da samfur
Tsaro
- Ya kamata a yi aiki da mai saka idanu kawai daga nau'in tushen wutar lantarki da aka nuna akan lakabin. Idan ba ku da tabbacin nau'in wutar lantarki da ake bayarwa ga gidanku, tuntuɓi dillalin ku ko kamfanin wutar lantarki na gida.
- Ana sanye da na'urar saka idanu tare da filogi mai tushe mai fuska uku, filogi mai fini na uku (ƙasa). Wannan filogi zai dace ne kawai a cikin madaidaicin wutar lantarki azaman fasalin aminci. Idan hanyar sadarwar ku ba ta ɗauki filogin waya uku ba, sa ma'aikacin wutar lantarki ya shigar da madaidaicin wurin, ko amfani da adaftan don ƙasa na'urar lafiya. Kar a kayar da manufar aminci na filogi mai tushe.
- Cire na'urar yayin guguwar walƙiya ko lokacin da ba za a yi amfani da shi na dogon lokaci ba. Wannan zai kare na'urar duba daga lalacewa saboda hauhawar wutar lantarki.
- Kar a yi lodin igiyoyin wuta da igiyoyin tsawo. Yin lodin abu zai iya haifar da gobara ko girgiza wutar lantarki. Don tabbatar da aiki mai gamsarwa, yi amfani da na'urar saka idanu kawai tare da kwamfutoci da aka jera UL waɗanda ke da madaidaitan madaidaitan ma'auni masu alama tsakanin 100-240V AC, Min. 5A. Za a shigar da soket ɗin bango a kusa da kayan aiki kuma ya zama mai sauƙi.
Shigarwa
- Kada ka sanya na'urar a kan keken mara tsayayye, tsayawa, tawul, sashi, ko teburi. Idan mai saka idanu ya faɗi, zai iya cutar da mutum kuma ya haifar da mummunar lalacewa ga wannan samfurin. Yi amfani da keken keke, tsayawa, tafkuna, madaidaici, ko tebur wanda masana'anta suka ba da shawarar ko aka sayar da wannan samfur. Bi umarnin masana'anta lokacin shigar da samfurin kuma yi amfani da na'urorin haɗi waɗanda masana'anta suka ba da shawarar. Ya kamata a motsa haɗin samfur da cart tare da kulawa.
- Kada a taɓa tura kowane abu zuwa cikin ramin kan ma'aunin saka idanu. Yana iya lalata sassan da'ira da ke haifar da gobara ko girgiza wutar lantarki. Kada a taɓa zubar ruwa a kan duba.
- Kada a sanya gaban samfurin a ƙasa.
- Idan ka dora na'urar a kan bango ko shiryayye, yi amfani da kayan hawan da masana'anta suka amince da shi kuma bi umarnin kit.
- Bar wasu sarari a kusa da mai duba kamar yadda aka nuna a ƙasa. In ba haka ba, zazzagewar iska na iya zama rashin isasshe don haka zafi fiye da kima na iya haifar da gobara ko lalata na'urar duba.
- Don gujewa yuwuwar lalacewa, ga misaliample, bawon panel daga bezel, tabbatar da cewa mai duba baya karkata zuwa ƙasa da fiye da digiri -5. Idan madaidaicin kusurwar ƙasa na digiri -5 ya wuce, lalacewar na'urar ba za a rufe ƙarƙashin garanti ba.
Wuraren da ake shawarta
- An shigar dashi tare da tsayawa: 12 inci (30cm)
- Sama: 4 inci (10cm)
- Kasa: 4 inci (10cm)
- Hagu: 4 inci (10cm)
- Dama: 4 inci (10cm)
Tsaftacewa
- Tsaftace majalisa akai-akai da zane. Kuna iya amfani da abu mai laushi don shafe tabon, maimakon mai ƙarfi-dotergent wanda zai kula da majalisar samfurin.
FAQ
- Tambaya: Zan iya amfani da mai duba tare da kowace tushen wuta?
A: A'a, ya kamata a yi amfani da na'urar kawai daga nau'in tushen wutar lantarki da aka nuna akan lakabin. Idan ba ku da tabbas, tuntuɓi dillalin ku ko kamfanin wutar lantarki na gida. - Tambaya: Zan iya hawa na'urar a kowane wuri?
A: A'a, ya kamata ku yi amfani da keken keke, tsayawa, tudu, sashi, ko tebur wanda masana'anta suka ba da shawarar ko aka sayar da wannan samfur. Bi umarnin masana'anta lokacin shigar da samfurin kuma yi amfani da na'urorin haɗi da aka amince da su. - Tambaya: Ta yaya zan tsaftace mai duba?
A: Tsaftace majalisa akai-akai da zane. Kuna iya amfani da abu mai laushi don goge tabo, amma guje wa yin amfani da kayan wanka mai ƙarfi saboda yana iya lalata majalisar samfurin.
- www.aoc.com
A 2020 AOC. An Kiyaye Dukkan Hakkoki
Tsaro
Taron kasa
Ƙananan sassan da ke gaba suna bayyana ƙa'idodin ƙa'idodin da aka yi amfani da su a cikin wannan takarda.
Bayanan kula, Gargaɗi, da Gargaɗi
- A cikin wannan jagorar, tubalan rubutu na iya kasancewa tare da gunki kuma a buga shi da nau'in m ko cikin nau'in rubutun. Waɗannan tubalan bayanin kula ne, gargaɗi, da gargaɗi, kuma ana amfani da su kamar haka:
NOTE: NOTE yana nuna mahimman bayanai waɗanda ke taimaka muku yin amfani da tsarin kwamfutar ku da kyau.
HANKALI:CAUTION yana nuna yiwuwar lalacewar hardware ko asarar bayanai kuma yana gaya muku yadda ake guje wa matsalar.
GARGADI: GARGAƊI yana nuna yiwuwar cutar da jiki kuma yana gaya muku yadda za ku guje wa matsalar. Wasu gargaɗin na iya bayyana a madadin tsari kuma ƙila ba su tare da gunki. A irin waɗannan lokuta, ƙayyadaddun gabatar da gargaɗin yana da izini ta hanyar hukuma.
Ƙarfi
- Ya kamata a yi aiki da mai saka idanu kawai daga nau'in tushen wutar lantarki da aka nuna akan lakabin. Idan ba ku da tabbacin nau'in wutar lantarki da ake bayarwa ga gidanku, tuntuɓi dillalin ku ko kamfanin wutar lantarki na gida.
- Ana sanye da na'urar saka idanu tare da filogi mai tushe mai fuska uku, filogi mai fini na uku (ƙasa). Wannan filogi zai dace ne kawai a cikin madaidaicin wutar lantarki azaman fasalin aminci. Idan hanyar sadarwar ku ba ta ɗauki filogin waya uku ba, sa ma'aikacin wutar lantarki ya shigar da madaidaicin wurin, ko amfani da adaftan don ƙasa na'urar lafiya. Kar a kayar da manufar aminci na filogi mai tushe.
- Cire na'urar yayin guguwar walƙiya ko lokacin da ba za a yi amfani da shi na dogon lokaci ba. Wannan zai kare
saka idanu daga lalacewa saboda hauhawar wutar lantarki. - Kar a yi lodin igiyoyin wuta da igiyoyin tsawo. Yin lodin abu zai iya haifar da gobara ko girgiza wutar lantarki.
- Don tabbatar da aiki mai gamsarwa, yi amfani da na'urar saka idanu kawai tare da kwamfutoci da aka jera UL waɗanda ke da madaidaitan madaidaitan ma'auni masu alama tsakanin 100-240V AC, Min. 5A.
- Za a shigar da soket ɗin bango a kusa da kayan aiki kuma ya zama mai sauƙi.
Shigarwa
- Kada ka sanya na'urar a kan keken mara tsayayye, tsayawa, mai hawa uku, sashi, ko teburi. Idan mai saka idanu ya faɗi, zai iya cutar da mutum kuma ya haifar da mummunar lalacewa ga wannan samfurin. Yi amfani da keken keke, tsayawa, tafki, madaidaici, ko tebur wanda masana'anta suka ba da shawarar ko aka sayar da wannan samfur. Bi umarnin masana'anta lokacin shigar da samfurin kuma yi amfani da na'urorin haɗi waɗanda masana'anta suka ba da shawarar. Ya kamata a motsa haɗin samfur da cart tare da kulawa.
- Kada a taɓa tura kowane abu zuwa cikin ramin kan ma'aunin saka idanu. Yana iya lalata sassan da'ira da ke haifar da gobara ko girgiza wutar lantarki. Kada a taɓa zubar ruwa a kan duba.
- Kada a sanya gaban samfurin a ƙasa.
- Idan ka dora na'urar a kan bango ko shiryayye, yi amfani da kayan hawan da masana'anta suka amince da shi kuma bi umarnin kit.
- Bar wasu sarari a kusa da mai duba kamar yadda aka nuna a ƙasa. In ba haka ba, zazzagewar iska na iya zama rashin isasshe don haka zafi fiye da kima na iya haifar da gobara ko lalata na'urar duba.
- Don gujewa yuwuwar lalacewa, ga misaliampidan panel ɗin yana barewa daga bezel, tabbatar da cewa mai duba baya karkata ƙasa da fiye da digiri -5. Idan madaidaicin kusurwa -5 digiri na ƙasa ya wuce, lalacewar na'urar ba za a rufe ƙarƙashin garanti ba.
- Duba ƙasa da shawarwarin wuraren samun iska a kusa da mai saka idanu lokacin da aka shigar da na'urar a bango ko a tsaye:
Tsaftacewa
- Tsaftace majalisa akai-akai da zane. Kuna iya amfani da abu mai laushi don shafe tabon, maimakon mai ƙarfi-dotergent wanda zai kula da majalisar samfurin.
- Lokacin tsaftacewa, tabbatar da cewa ba a zubar da wanki a cikin samfurin ba. Tufafin tsaftacewa bai kamata ya zama mai tauri ba saboda zai tarar da fuskar allo.
- Da fatan za a cire haɗin wutar lantarki kafin tsaftace samfurin.
Sauran
- Idan samfurin yana fitar da wani bakon kamshi, sauti ko hayaki, cire haɗin wutar lantarki NAN TAKE kuma tuntuɓi Cibiyar Sabis.
- Tabbatar cewa ba'a toshe wuraren buɗewar da tebur ko labule.
- Kada a sa na'urar duba LCD a cikin tsananin girgiza ko yanayin tasiri yayin aiki.
- Kar a ƙwanƙwasa ko sauke na'urar duba yayin aiki ko sufuri.
- Cordarfin wutar zai zama mai amincin aminci. Don Jamus, zai zama H03VV-F, 3G, 0.75 mm2, ko mafi kyau. Ga wasu ƙasashe, za a yi amfani da nau'ikan da suka dace a kan hakan.
- Matsin sauti mai yawa daga belun kunne da belun kunne na iya haifar da asarar ji. Daidaita mai daidaitawa zuwa matsakaicin yana ƙara fitowar belun kunne da belun kunne voltage sabili da haka matakin matsa lamba.
Saita
Abubuwan da ke cikin Akwati
Ba duk kebul na sigina ba za a samar da shi ga duk ƙasashe da yankuna. Da fatan za a bincika tare da dila na gida ko ofishin reshe na AOC don tabbatarwa.
Saita Tsaya & Tushe
Da fatan za a saita ko cire tushe ta bin matakan kamar ƙasa.
Saita
Cire
Daidaitawa Viewcikin Angle
- Don mafi kyau duka viewAna ba da shawarar duba cikakkiyar fuskar mai duba, sannan daidaita kusurwar mai duba zuwa naka zaɓi.
- Rike tsayawar don kada ku kifar da mai duba lokacin da kuka canza kusurwar mai duba.
- Kuna iya daidaita mai duba kamar yadda ke ƙasa
NOTE:
- Kada ku taɓa allon LCD lokacin da kuke canza kusurwa. Yana iya haifar da lalacewa ko karya allon LCD.
GARGADI:
- Don guje wa yuwuwar lalacewar allo, kamar bawon panel, tabbatar da cewa mai duba baya karkata ƙasa da fiye da digiri -5.
- Kar a danna allon yayin daidaita kusurwar mai duba. Riƙe bezel kawai.
Haɗa Monitor
Haɗin Kebul A Bayan Kula da Kwamfuta
- USB3.2 Gen1 + caji
- USB3.2 Gen1
- USB-PC (USB na sama)
- USB3.2 Gen1
- Ƙarfi
- HDMI x2
- DP
- Wayar kunne
Haɗa zuwa PC
- Haɗa igiyar wutar lantarki zuwa bayan nuni da ƙarfi.
- Kashe kwamfutarka kuma cire igiyoyin wutar lantarki.
- Haɗa kebul ɗin siginar nuni zuwa mai haɗin bidiyo a bayan kwamfutarka.
- Toshe igiyar wutar lantarki na kwamfutarku da nunin ku zuwa mashigar da ke kusa.
- Kunna kwamfutarka kuma nunawa.
Idan duban ku ya nuna hoto, shigarwa ya cika. Idan baya nuna hoto, da fatan za a duba Shirya matsala. Don kare kayan aiki, koyaushe kashe PC da LCD duba kafin haɗawa.
Hawan bango
Ana Shiri Don Shigar Hannun Dutsen bango Na zaɓi.
Ana iya haɗa wannan na'ura mai duba zuwa hannun bangon bango da kuka saya daban. Cire haɗin wuta kafin wannan hanya. Bi waɗannan matakan:
- Cire tushe.
- Bi umarnin masana'anta don haɗa hannun hawan bango.
- Sanya hannun hawan bango a bayan na'urar duba. Yi layi a ramukan hannu tare da ramukan a bayan mai duba.
- Saka 4 sukurori a cikin ramukan kuma ƙara ƙarfi.
- Sake haɗa igiyoyin. Koma zuwa littafin jagorar mai amfani wanda ya zo tare da hannun ɗaurin bango na zaɓi don umarnin liƙa shi zuwa bango.
An lura: Babu ramukan hawa na VESA don kowane samfuri, da fatan za a bincika tare da dila ko sashen hukuma na AOC.
Ƙirar nuni na iya bambanta da waɗanda aka kwatanta.
GARGADI
- Don guje wa yuwuwar lalacewar allo, kamar bawon panel, tabbatar da cewa mai duba baya karkata ƙasa da fiye da digiri 5.
- Kar a danna allon yayin daidaita kusurwar mai duba. Riƙe bezel kawai.
Daidaitawa
Hotkeys
| 1 | Tushen/Fita |
| 2 | Bayyana hangen nesa / |
| 3 | Volume /> |
| 4 | Menu/Shiga |
| 5 | Ƙarfi |
Ƙarfi
Danna maɓallin wuta don kunna/kashe mai duba.
Menu/Zaɓa
Kunna menu na OSD ko tabbacin daidaita aiki.
Ƙarar / ƙara
Lokacin da menu na OSD ya rufe, danna maɓallin ">" don buɗe sandar daidaita ƙara, kuma danna maɓallin "<" ko ">" don daidaita ƙarar fitarwa na lasifikan kai.
Sauyawa/fita tushen tushe
Lokacin da menu na OSD ke kashe, danna wannan maɓallin don kunna aikin sauya tushen siginar, danna wannan maɓallin ci gaba don zaɓar tushen siginar da aka nuna a mashigin bayanai, sannan danna maɓallin menu don daidaitawa zuwa tushen siginar da aka zaɓa. Lokacin da menu na OSD ke aiki, wannan maɓallin yana aiki azaman maɓallin fita (don fita menu na OSD)
Bayyana hangen nesa
- Lokacin da babu OSD, Danna maɓallin "<" don kunna Clear Vision.
- Yi amfani da maɓallan "<" ko ">" don zaɓar tsakanin saitunan masu rauni, matsakaita, ƙarfi, ko kashewa. Saitin tsoho koyaushe yana "kashe".
- Latsa ka riƙe maɓallin "<" na tsawon daƙiƙa 5 don kunna Clear Vision Demo, kuma za a nuna saƙon "Clear Vision Demo: on" akan allon na tsawon daƙiƙa 5. Danna Menu ko Maɓallin Fita, saƙon zai ɓace. Latsa ka riƙe maɓallin "<" na tsawon daƙiƙa 5 kuma, Clear Vision Demo zai kashe.
- Ayyukan Clear Vision yana ba da mafi kyawun hoto viewƘwarewa ta hanyar canza ƙananan ƙuduri da hotuna masu duhu zuwa bayyanannun hotuna masu haske.
| Bayyana hangen nesa | Kashe | Daidaita Bayyanar hangen nesa |
| Mai rauni | ||
| Matsakaici | ||
| Mai ƙarfi | ||
| Share Vision Demo | Kunna Ko Kashe | A kashe ko Kunna Demo |
Saitin OSD
Umarni na asali da sauƙi akan maɓallan sarrafawa.
- Danna maɓallin MENU don kunna OSD taga.
- Danna < ko > don kewaya cikin ayyukan. Da zarar aikin da ake so ya haskaka, danna maballin MENU don kunna shi, danna <ko> don kewaya cikin ayyukan ƙananan menu. Da zarar aikin da ake so ya haskaka, danna maɓallin MENU don kunna shi.
- Danna < ko > don canza saitunan aikin da aka zaɓa. Danna maɓallin AUTO-don fita. Idan kana son daidaita kowane aiki, maimaita matakai 2-3.
- Aikin Kulle OSD: Don kulle OSD, danna ka riƙe maɓallin MENU-maɓallin yayin da mai duba ke kashe sannan danna maɓallin wuta don kunna mai duba. Don buɗe OSD - latsa ka riƙe maɓallin MENU-maɓallin yayin da mai duba ke kashe sannan danna maɓallin wuta don kunna mai duba.
Bayanan kula
- Idan samfurin yana da shigarwar siginar guda ɗaya kawai, abu na "Input Select" yana kashe don daidaitawa.
- Idan girman allo na samfurin shine 4:3 ko ƙudurin siginar shigarwa shine ƙudurin ɗan ƙasa, to abu "Rashin Hoto" ba shi da inganci.
- Jihohi huɗu na yanayin ECO (sai dai daidaitaccen yanayin), yanayin DCR, yanayin DCB da haskaka taga suna iya nuna jiha ɗaya kawai a lokaci ɗaya.
Hasken haske
Lura:
Lokacin da aka saita "Yanayin HDR" zuwa yanayin da ba a kashe ba, "Bambanta", "Yanayin Yanayin Haske", da "Gamma" abubuwa ba za a iya daidaita su ba.
Saita Launi
Lura:
Lokacin da aka saita "Yanayin HDR" a ƙarƙashin "Haske" zuwa yanayin da ba a kashe ba, duk abubuwan da ke ƙarƙashin "Saitunan Launi" ba za a iya daidaita su ba.
Haɓaka Hoto
Lura
- Don mafi kyau viewgwaninta, daidaita haske, bambanci, da matsayi na haskakawa.
- Lokacin da "HDR Yanayin" a ƙarƙashin "Haske" aka saita zuwa yanayin da ba a kashe ba, duk abubuwan da ke ƙarƙashin "Window Brightening" ba za a iya daidaita su ba.
OSD Saita
Saitin Wasan
Lura
Lokacin da aka saita "Yanayin HDR" a ƙarƙashin "Haske" zuwa yanayin da ba a kashe ba, ba za a iya daidaita abubuwan "Yanayin Wasan", "Ikon Filin Dark", da "Sautin Wasan" a ƙarƙashin "Saitunan Wasanni" ba.
Ƙari
Fita
Alamar LED
| Matsayi | LED Launi |
| Cikakken Yanayin Ƙarfi | Fari |
| Yanayin Kashe Aiki | Lemu |
Shirya matsala
| Matsala & Tambaya | Mahimman Magani |
| Ƙarfi LED Is Ba ON | Tabbatar cewa maɓallin wuta yana kunne kuma Igiyar Wutar tana haɗe da kyau zuwa tashar wutar lantarki ta ƙasa da kuma na'urar duba. |
| A'a hotuna on da allo |
|
| Hoto Is Haushi & Ya Fatalwa Inuwa Matsala |
|
| Hoto Bounces, Flickers Or Wave Tsarin Ya bayyana In The Hoto |
|
| Saka idanu Is Makale In Mai aiki Kashe- Yanayin" |
|
| Bace daya of da firamare launuka (JAN, GREEN, or BLUE) | Duba kebul na bidiyo na mai saka idanu kuma tabbatar da cewa babu fil da ya lalace. Tabbatar cewa kebul ɗin bidiyo na mai duba yana da alaƙa da kwamfutar yadda ya kamata. |
| Allon hoto is ba a tsakiya or girma yadda ya kamata | Daidaita H-Position da V-Position ko latsa hot-key (AUTO). |
| Hoto yana da launi lahani (farar yayi ba duba fari) | Daidaita launi RGB ko zaɓi zafin launi da ake so. |
| A kwance or a tsaye hargitsi on da allo | Yi amfani da yanayin rufe Windows 7/8/10 don daidaita CLOCK da FOCUS. Danna don daidaitawa ta atomatik. |
| Ka'ida & Sabis |
|
Ƙayyadaddun bayanai
Ƙididdigar Gabaɗaya
| Panel | Sunan samfurin | Q32P2 | ||
| Tsarin tuki | TFT launi LCD | |||
| Viewiya Girman Hoto | 80.1 cm diagonal | |||
| Matsakaicin pixel | 0.2727mm(H) x 0.2727mm(V) | |||
| Wasu | Takaitaccen sikelin sikelin | 30k-114kHz | ||
| Girman sikanin kwance (Mafi girman) | 698.112mm ku | |||
| Tsayin sikelin tsaye | 48-75Hz | |||
| Girman Duban Tsaye (Mafi girman) | 392.688mm ku | |||
| Matsakaicin ƙuduri | 2560×1440@75Hz | |||
| Toshe & Kunna | VESA DDC2B/CI | |||
| Tushen wutar lantarki | 100-240V~, 50/60Hz, 1.5A | |||
| Amfanin Wuta | Na al'ada (Haske = 90, Sabanin = 50) | 35W | ||
| Max. (haske = 100, bambanci = 100) | ≤90W | |||
| Yanayin jiran aiki | ≤ 0.5W | |||
| Halayen Jiki | Mai Haɗa Input | HDMI/DP/USB | ||
| USB |
|
|||
| Nau'in Siginar Kebul | Mai iya cirewa | |||
| Muhalli | Zazzabi | Aiki | 0° ~ 40° | |
| Mara Aiki | -25° ~ 55° | |||
| Danshi | Aiki | 10% ~ 85% (ba mai sanyawa) | ||
| Mara Aiki | 5% ~ 93% (ba mai sanyawa) | |||
| Tsayi | Aiki | 0 ~ 5000 m (0 ~ 16404 ft) | ||
| Mara Aiki | 0 ~ 12192m (0 ~ 40000ft) | |||
Hanyoyin Nuni da Saiti
| STANDARD | HUKUNCI | HORIZONTAL YAWAITA (kHz) | MA'ANANTA YAWAITA(Hz) |
| VGA | 640×480@60Hz | 31.469 | 59.94 |
| 640×480@72Hz | 37.861 | 72.809 | |
| 640×480@75Hz | 37.5 | 75 | |
| Farashin SVGA | 800×600@56Hz | 35.156 | 56.25 |
| 800×600@60Hz | 37.879 | 60.317 | |
| 800×600@72Hz | 48.077 | 72.188 | |
| 800×600@75Hz | 46.875 | 75 | |
| Farashin XGA | 1024×768@60Hz | 48.363 | 60.004 |
| 1024×768@70Hz | 56.476 | 70.069 | |
| 1024×768@75Hz | 60.023 | 75.029 | |
| SXGA | 1280×1024@60Hz | 63.981 | 60.02 |
| 1280×1024@75Hz | 79.976 | 75.025 | |
| WXGA+ | 1440×900@60Hz | 55.935 | 59.887 |
| 1440×900@60Hz | 55.469 | 59.901 | |
| WSXGA | 1680×1050@60Hz | 65.29 | 59.954 |
| 1680×1050@60Hz | 64.674 | 59.883 | |
| FHD | 1920×1080@60Hz | 67.5 | 60 |
| QHD | 2560×1440@60Hz | 88.787 | 59.951 |
| QHD | 2560×1440@75Hz | 66.636 | 74.968 |
| IBM MODES | |||
| DOS | 720×400@70Hz | 31.469 | 70.087 |
| MAGANAR MAC | |||
| VGA | 640×480@67Hz | 35 | 66.667 |
| Farashin SVGA | 832×624@75Hz | 49.725 | 74.551 |
| Farashin XGA | 1024×768@75Hz | 60.241 | 74.927 |
| VGA | 640×480@67Hz | 35 | 66.667 |
| Farashin SVGA | 832×624@75Hz | 49.725 | 74.551 |
| Farashin XGA | 1024×768@75Hz | 60.241 | 74.927 |
Sanya Ayyuka
- 19-Cable Signal Cable Signal Cable
| Pin A'a. | Sigina Suna | Pin A'a. | Sigina Suna | Pin A'a. | Sigina Suna |
| 1. | Bayanan TMDS 2+ | 9. | Bayanan TMDS 0- | 17. | DDC/CEC Ground |
| 2. | TMDS Data 2 Garkuwa | 10. | TMDS agogo + | 18. | + 5V Power |
| 3. | Bayanan TMDS 2- | 11. | Garkuwan agogo na TMDS | 19. | Gano Toshe mai zafi |
| 4. | Bayanan TMDS 1+ | 12. | Kwanan TMDS | ||
| 5. | Bayanan TMDS 1Shield | 13. | CEC | ||
| 6. | Bayanan TMDS 1- | 14. | Ajiye (NC akan na'urar) | ||
| 7. | Bayanan TMDS 0+ | 15. | SCL | ||
| 8. | TMDS Data 0 Garkuwa | 16. | SDA |
20-Cable Signal Cable Signal Cable
| Pin A'a. | Sigina Suna | Pin A'a. | Sigina Suna |
| 1 | ML_Lane 3 (n) | 11 | GND |
| 2 | GND | 12 | ML_Lane 0 (p) |
| 3 | ML_Lane 3 (p) | 13 | Sanyawa1 |
| 4 | ML_Lane 2 (n) | 14 | Sanyawa2 |
| 5 | GND | 15 | AUX_CH (shafi) |
| 6 | ML_Lane 2 (p) | 16 | GND |
| 7 | ML_Lane 1 (n) | 17 | AUX_CH (n) |
| 8 | GND | 18 | Gano Toshe mai zafi |
| 9 | ML_Lane 1 (p) | 19 | Koma DP_PWR |
| 10 | ML_Lane 0 (n) | 20 | DP_PWR |
Toshe kuma Kunna
- Toshe & Kunna fasalin DDC2B
- Wannan saka idanu yana sanye da damar VESA DDC2B bisa ga VESA DDC STANDARD. Yana ba mai saka idanu damar sanar da tsarin runduna ainihin sa kuma, dangane da matakin DDC da aka yi amfani da shi, sadar da ƙarin bayani game da iyawar nuninsa.
- DDC2B tashar bayanai ce ta gaba-gaba bisa ka'idar I2C. Mai watsa shiri na iya buƙatar bayanin EDID akan tashar DDC2B.
Takardu / Albarkatu
 |
AOC Q32P2CA LCD Mai Kula da Kwamfuta [pdf] Manual mai amfani Q32P2CA LCD Mai Kula da Kwamfuta, Q32P2CA, Kula da Kwamfuta LCD, Mai Kula da Kwamfuta, Kulawa |
