ARDUINO ABX00049 Core Electronics Module
wehewehe
ʻO ka Arduino® Portenta X8 kahi kamepiula papa hoʻokahi hana kiʻekiʻe i hoʻolālā ʻia e mana i ka hanauna e hiki mai ana o Industrial Internet of Things. Hoʻohui kēia papa i ka NXP® i.MX 8M Mini e hoʻokipa ana i kahi Linux OS i hoʻokomo ʻia me ka STM32H7 e hoʻohana i nā hale waihona puke Arduino. Loaʻa nā pale a me nā papa lawe e hoʻonui i ka hana o ka X8 a i ʻole hiki ke hoʻohana ʻia e like me nā hoʻolālā kuhikuhi e hoʻomohala i kāu mau hoʻonā maʻamau.
Nā ʻĀpana Kūlana
ʻO ka helu helu lihi, ka pūnaewele ʻenehana o nā mea, kamepiula papa hoʻokahi, ʻike akamai
Nā hiʻohiʻona
| ʻāpana | Nā kikoʻī | |
| NXP® i.MX 8M
Mini Mea hana |
4x Arm® Cortex®-A53 mau kahua kikowaena a hiki i ka 1.8 GHz no ke kumu |
32KB L1-I Cache 32 kB L1-D Cache 512 kB L2 Cache |
| Arm® Cortex®-M4 kumu a hiki i 400 MHz | 16 kB L1-I Cache 16 kB L2-D Cache | |
| 3D GPU (1x shader, OpenGL® ES 2.0) | ||
| 2D GPU | ||
| 1x MIPI DSI (4-lane) me PHY | ||
| 1080p60 VP9 Profile 0, 2 (10-bit) decoder, HEVC/H.265 decoder, AVC/H.264 Baseline, Main, High decoder, VP8 decoder | ||
| 1080p60 AVC/H.264 encoder, VP8 encoder | ||
| 5x SAI (12Tx + 16Rx waho I2S alahele), 8ch PDM komo | ||
| 1x MIPI CSI (4-lane) me PHY | ||
| 2x USB 2.0 OTG kaohi me ka PHY hoʻohui | ||
| 1x PCIe 2.0 (1-lane) me L1 mana haʻahaʻa haʻahaʻa | ||
| 1x Gigabit Ethernet (MAC) me AVB a me IEEE 1588, Energy Efficient Ethernet (EEE) no ka mana haʻahaʻa | ||
| 4x UART (5mbps) | ||
| 4x I2C | ||
| 3x SPI | ||
| 4x PWM | ||
| STM32H747XI
ʻO Microcontroller |
ʻO Arm® Cortex®-M7 kumu a hiki i ka 480 MHz me ka FPU pololei pālua | 16K ʻikepili + 16K aʻo L1 cache |
| 1x Arm® 32-bit Cortex®-M4 core a hiki i 240 MHz me FPU, Adaptive real-time accelerator (ART Accelerator™) | ||
| Hoʻomanaʻo | 2 MB o ka Flash Memory me ke kākoʻo heluhelu-ʻoiai-kākau
1 MB o RAM |
|
| Hoʻomanaʻo papa | NT6AN512T32AV | 2GB Mana Haʻahaʻa DDR4 DRAM |
| FEMDRW016G | 16GB Foresee® eMMC Flash module | |
| USB-C | USB māmā holo kiʻekiʻe | |
| Hōʻike Port | ||
| Mea hoʻokipa a me ka hana ʻana o ka polokalamu | ||
| Kākoʻo hoʻouna mana | ||
| ʻāpana | Nā kikoʻī | |
| Kiʻekiʻe Nā mea hoʻohui paʻa | 1 alahele PCI express | |
| 1x 10/100/1000 Ethernet interface me PHY | ||
| 2x USB HS | ||
| 4x UART (2 me ka mana kahe) | ||
| 3x I2C | ||
| 1x SDcard interface | ||
| 2x SPI (1 kaʻana like me UART) | ||
| 1x I2S | ||
| 1x hoʻokomo PDM | ||
| 4 alahele MIPI DSI puka | ||
| 4 alahele MIPI CSI hoʻokomo | ||
| 4x PWM pukana | ||
| 7x GPIO | ||
| 8x ADC komo me ka VREF kaawale | ||
| Murata® 1DX Module Wi- Fi®/Bluetooth® | Wi-Fi® 802.11b/g/n 65 Mbps | |
| Bluetooth® 5.1 BR/EDR/LE | ||
| NXP® SE050C2
Crypto |
Paʻa maʻamau EAL 6+ i hōʻoia ʻia a hiki i ka pae OS | |
| Nā hana RSA & ECC, kiʻekiʻe kiʻekiʻe ka lōʻihi a me nā pihi hōʻoia e hiki mai ana, e like me brainpool, Edwards, a me Montgomery | ||
| AES & 3DES encryption a decryption | ||
| HMAC, CMAC, SHA-1, SHA-224/256/384/512
nā hana |
||
| HKDF, MIFARE® KDF, PRF (TLS-PSK) | ||
| Kākoʻo i nā hana TPM nui | ||
| Hoʻopaʻa ʻia ka hoʻomanaʻo mea hoʻohana flash a hiki i 50kB | ||
| Ke kauā I2C (Ke ano holo wikiwiki, 3.4 Mbit/s), haku I2C (Ke ano wikiwiki, 400 kbit/s) | ||
| SCP03 (hoʻopili kaʻa a me ka hoʻopiʻi hōʻoia i hoʻopili ʻia ma ka applet a me ka pae pae) | ||
| TI ADS7959SRGET | 12 bit, 1 MSPS, 8 Ch, Hoʻokahi Hoʻopau, Micro Power, SAR ADC | |
| ʻElua SW Unipolar hiki ke koho ʻia, nā pae hoʻokomo: 0 i VREF a me 0 i 2 x VREF | ||
| Nā ʻano kaʻa a me ka lima no ke koho ʻana i ke kahawai | ||
| ʻElua mau pae ʻala hoʻomaʻamaʻa polokalamu no kēlā me kēia Kanal | ||
| Ka mana-i lalo (1 µA) | ||
| Ka Laea Hookomo (47 MHz ma 3 dB) | ||
| NXP® PCF8563BS | ʻO ka mana haʻahaʻa o ka manawa maoli | |
| Hāʻawi i ka hae Century, makahiki, mahina, lā, lā pule, hola, minuke a me kekona | ||
| Haʻahaʻa kākoʻo i kēia manawa; typical 250 nA ma VDD = 3.0 V a me Tamb = 25°C | ||
| ʻāpana | Nā kikoʻī | |
| ROHM BD71847AMWV
PMIC hiki ke hoʻolālā |
Voltage hoʻonui | |
| 3.3V/2A voltage puka i ka papa lawe | ||
| Kaulana wela | -40°C a i +85°C | Na ka mea hoʻohana wale nō ke kuleana e hoʻāʻo i ka hana ʻana o ka papa ma ka pae wela piha |
| ʻIke palekana | Papa A | |
Noi Examples
Ua hoʻolālā ʻia ka Arduino® Portenta X8 no nā noi helu helu hoʻokomo kiʻekiʻe i ka noʻonoʻo, e pili ana i ka quad core NXP® i.MX 8M Mini Processor. Hiki i ka Portenta form factor ke hoʻohana i kahi ākea o nā pale e hoʻonui i kāna hana.
- Linux i hoʻokomo ʻia: E hoʻomaka i ka hoʻolaha ʻana o ka ʻOihana 4.0 me nā Pūʻulu Kākoʻo Papa Linux e holo ana ma ka hiʻohiʻona i hoʻopili ʻia a me ka ikehu Arduino® Portenta X8. E hoʻohana i ka GNU toolchain e hoʻomohala i kāu mau hoʻonā me ka ʻole o ka laka ʻenehana.
- ʻOihana hana kiʻekiʻe: Aia ka Arduino® Portenta X8 i ka Wi-Fi® a me ka pilina Bluetooth® e launa pū me nā ʻano mea like ʻole o waho a me nā pūnaewele e hāʻawi ana i ka maʻalahi. Hoʻohui ʻia, hāʻawi ʻo Gigabit Ethernet interface i ka wikiwiki kiʻekiʻe a me ka latency haʻahaʻa no ka koi nui o nā noi.
- Hoʻomohala hoʻokomo modular kiʻekiʻe: ʻO Arduino® Portenta X8 kahi ʻāpana maikaʻi loa no ka hoʻomohala ʻana i kahi ākea o nā hoʻonā maʻamau. Hāʻawi ka mea hoʻohui kiʻekiʻe kiʻekiʻe i ke komo ʻana i nā hana he nui, me ka hoʻohui PCIe, CAN, SAI a me MIPI. ʻO kahi ʻē aʻe, e hoʻohana i ka Arduino kaiaola o nā papa i hoʻolālā ʻia e like me ke kuhikuhi no kāu mau hoʻolālā ponoʻī. Hiki i nā pahu lako polokalamu ha'aha'a ke ho'olaha wikiwiki.
Mea lako
- Hub USB-C
- USB-C i ka HDMI Adapter
Nā Huahana Pili
- Arduino® Portenta Breakout Papa (ASX00031)
Manaʻo ʻia nā kūlana hana
| hōʻailona | wehewehe | Min | ʻAno | Max | Unite |
| VIN | Hoʻokomo voltage mai VIN pad | 4.5 | 5 | 5.5 | V |
| VUSB | Hoʻokomo voltage mai ka mea hoʻopili USB | 4.5 | 5 | 5.5 | V |
| ʻO V3V3 | 3.3 V puka i ka noi mea hoʻohana | 3.1 | V | ||
| I3V3 | Loaʻa ka 3.3 V i kēia manawa no ka noi mea hoʻohana | – | – | 1000 | mA |
| VIH | E hookomo i ka voltage | 2.31 | – | 3.3 | V |
| VIL | Hoʻokomo haʻahaʻa haʻahaʻa voltage | 0 | – | 0.99 | V |
| IOH Max | ʻO kēia ma VDD-0.4 V, hoʻonoho kiʻekiʻe | 8 | mA | ||
| IOL Max | ʻO kēia ma VSS+0.4 V, hoʻonoho haʻahaʻa | 8 | mA | ||
| VOH | Puke kiʻekiʻe voltage, 8 mA | 2.7 | – | 3.3 | V |
| VOL | Puka haʻahaʻa voltage, 8 mA | 0 | – | 0.4 | V |
Hoʻohana mana
| hōʻailona | wehewehe | Min | ʻAno | Max | Unite |
| PBL | Hoʻohana mana me ka loop loop | 2350 | mW | ||
| PLP | Hoʻohana mana ma ke ʻano mana haʻahaʻa | 200 | mW | ||
| PMAX | Hoʻohana mana kiʻekiʻe | 4000 | mW |
Manaʻo ʻia e hoʻohana i kahi port USB 3.0 i ka wā e hoʻopili ai i ka Portenta X8 hiki ke hāʻawi i ka mana i koi ʻia. Hiki i ka Dynamic scaling o ka Portenta X8 ke hoʻololi i ka hoʻohana ʻana i kēia manawa, e alakaʻi ana i nā piʻi o kēia manawa i ka wā bootup. Hāʻawi ʻia ka hoʻohana ʻana i ka mana ma ka papa ma luna no kekahi mau hiʻohiʻona kuhikuhi.
Papa Kuhikuhi
Papa Topology
Imua View
| Ref. | wehewehe | Ref. | wehewehe |
| U1 | BD71847AMWV i.MX 8M Mini PMIC | U2 | MIMX8MM6CVTKZAA i.MX 8M Mini Quad IC |
| U4 | NCP383LMUAJAATXG Hoʻololi mana-palena i kēia manawa | U6 | ANX7625 MIPI-DSI/DPI i ka USB Type-C™ Bridge IC |
| U7 | MP28210 Haʻalele i lalo IC | U9 | LBEE5KL1DX-883 WLAN+Bluetooth® Combo IC |
| U12 | PCMF2USB3B/CZ Bidirectional EMI Palekana IC | U16,U21,U22,U23 | FXL4TD245UMX 4-Bit Bidirectional Voltage-level Unuhi IC |
| U17 | DSC6151HI2B 25MHz MEMS Oscillator | U18 | DSC6151HI2B 27MHz MEMS Oscillator |
| U19 | NT6AN512T32AV 2GB LP-DDR4 DRAM | IC1,IC2,IC3,IC4 | SN74LVC1G125DCKR 3-mokuʻāina 1.65-V i 5.5-V pale IC |
| PB1 | PTS820J25KSMTRLFS Hoʻihoʻi hou i ke pihi kaomi | Dl1 | KPHHS-1005SURCK Mana ma SMD LED |
| DL2 | SMLP34RGB2W3 RGB Anode SMD LED | Y1 | CX3225GB24000P0HPQCC 24MHz aniani |
| Y3 | DSC2311KI2-R0012 Pālua-Hanaʻo MEMS Oscillator | J3 | CX90B1-24P mea hoʻohui USB Type-C |
| J4 | U.FL-R-SMT-1(60) UFL Connector |
Ke kua View
| Ref. | wehewehe | Ref. | wehewehe |
| U3 | LM66100DCKR Diode Pono | U5 | FEMDRW016G 16GB eMMC Flash IC |
| U8 | KSZ9031RNXIA Gigabit Ethernet Transceiver IC | U10 | FXMA2102L8X Hāʻawi Pālua, 2-Bit Voltage Unuhi IC |
| U11 | SE050C2HQ1/Z01SDZ IoT Mea Palekana | U12, U13,U14 | PCMF2USB3B/CZ Bidirectional EMI Palekana IC |
| U15 | NX18P3001UKZ Hoʻololi mana Bidirectional IC | U20 | STM32H747AII6 Dual ARM® Cortex® M7/M4 IC |
| Y2 | SIT1532AI-J4-DCC-32.768E 32.768KHz MEMS Oscillator IC | J1, J2 | Nā mea hoʻohui kiʻekiʻe |
| Q1 | 2N7002T-7-F N-Kula 60V 115mA MOSFET |
Mea hana
Hoʻohana ʻo Arduino Portenta X8 i ʻelua mau ʻāpana hoʻoili kino e pili ana i ka ARM®.
NXP® i.MX 8M Mini Quad Core Microprocessor
Hōʻike ka MIMX8MM6CVTKZAA iMX8M (U2) i kahi quad core ARM® Cortex® A53 e holo ana a hiki i 1.8 GHz no nā noi hana kiʻekiʻe me ka ARM® Cortex® M4 e holo ana a hiki i 400 MHz. Hiki i ka ARM® Cortex® A53 ke holo i ka Linux holoʻokoʻa a i ʻole ka ʻōnaehana hana Android ma o ka Board Support Packages (BSP) ma ke ʻano multithreaded. Hiki ke hoʻonui ʻia kēia ma o ka hoʻohana ʻana i nā pahu lako polokalamu kūikawā ma o nā mea hou OTA. ʻO ka ARM® Cortex® M4 ka haʻahaʻa haʻahaʻa o ka mana e hiki ai i ka hoʻokele moe kūpono a me ka hana maikaʻi loa i nā noi manawa maoli a mālama ʻia no ka hoʻohana e hiki mai ana. Hiki i nā mea hana ʻelua ke kaʻana like i nā peripheral a me nā kumuwaiwai āpau i loaʻa ma ka i.MX 8M Mini, me ka PCIe, ka hoʻomanaʻo ma-chip, GPIO, GPU a me Audio.
ʻO STM32 ʻAi ʻAi ʻElua Microprocessor
Loaʻa i ka X8 kahi H7 i hoʻokomo ʻia ma ke ʻano o kahi STM32H747AII6 IC (U20) me ka ARM® Cortex® M7 a me ARM® Cortex® M4. Hoʻohana ʻia kēia IC ma ke ʻano he mea hoʻonui I/O no ka NXP® i.MX 8M Mini (U2). Hoʻomalu ʻia nā peripherals ma o ka M7 core. Hoʻohui ʻia, loaʻa ka M4 core no ka mana manawa maoli o nā kaʻa a me nā mīkini koʻikoʻi manawa ma kahi pae barebones. Hana ʻia ka M7 core ma ke ʻano he uwao ma waena o nā peripheral a me ka i.MX 8M Mini a holo i kahi ʻoihana ponoʻī i hiki ʻole i ka mea hoʻohana. ʻAʻole ʻike ʻia ka STM32H7 i ka pūnaewele a pono e hoʻolālā ʻia ma o ka i.MX 8M Mini (U2).
Hoʻohui Wi-Fi®/Bluetooth®
Hāʻawi ka Murata® LBEE5KL1DX-883 module wireless (U9) i ka manawa like i ka Wi-Fi® a me Bluetooth® hoʻohui i loko o kahi pūʻolo liʻiliʻi loa e pili ana i ka Cypress CYW4343W. Hiki ke hoʻohana ʻia ka IEEE802.11b/g/n Wi-Fi® ma ke ʻano he wahi komo (AP), station (STA) a i ʻole ma ke ʻano ʻelua ʻano AP/STA i ka manawa like a kākoʻo i ka helu hoʻololi kiʻekiʻe o 65 Mbps. Kākoʻo ke kikowaena Bluetooth® iā Bluetooth® Classic a me Bluetooth® Low Energy. ʻO ka hoʻololi kaapuni antenna i hoʻohui ʻia e ʻae i kahi antenna waho hoʻokahi (J4 a i ʻole ANT1) e kaʻana like ma waena o Wi-Fi® a me Bluetooth®. Hoʻopili ka Module U9 me ka i.MX 8M Mini (U2) ma o ka 4bit SDIO a me ka UART interface. Ma muli o ka pūʻulu polokalamu o ka module uea i loko o ka linux OS i hoʻokomo ʻia, kākoʻo pū ʻia ʻo Bluetooth® 5.1 me Wi-Fi® e like me ke kūlana IEEE802.11b/g/n.
Hoʻomanaʻo ma luna o ka moku
Aia ka Arduino® Portenta X8 i ʻelua mau modula hoʻomanaʻo ma luna. Hiki ke loaʻa i kahi NT6AN512T32AV 2GB LP-DDR4 DRAM (U19) a me 16GB Forsee eMMC Flash module (FEMDRW016G) (U5) i ka i.MX 8M Mini (U2).
Kākoʻo Crypto
Hiki i ka Arduino® Portenta X8 ke hiki i ka IC level edge-to-cloud security capability ma o ka NXP® SE050C2 Crypto chip (U11). Hāʻawi kēia i ka palapala hōʻoia palekana EAL 6+ maʻamau a hiki i ka pae OS, a me ke kākoʻo algorithm cryptographic RSA/ECC a me ka mālama ʻana i ka hōʻoia. Hoʻopili ia me ka NXP® i.MX 8M Mini ma o I2C.
Gigabit Ethernet
Aia i loko o ka NXP® i.MX 8M Mini Quad kahi mea hoʻoponopono Ethernet 10/100/1000 me ke kākoʻo no Energy Efficient Ethernet (EEE), Ethernet AVB, a me IEEE 1588. Pono kahi mea hoʻopili kino waho e hoʻopau i ka interface. Hiki ke kiʻi ʻia kēia ma o kahi mea hoʻohui kiʻekiʻe me kahi mea waho e like me ka Arduino® Portenta Breakout board.
Pānaehana USB-C
Hāʻawi ka mea hoʻohui USB-C i nā koho hoʻohui like ʻole ma luna o kahi kikowaena kino hoʻokahi:
- Hāʻawi i ka mana o ka papa ma ke ʻano DFP a me DRP
- Ka mana kumu i nā peripheral waho ke hoʻoikaika ʻia ka papa ma o VIN
- E hōʻike i ka māmā holo kiʻekiʻe (480 Mbps) a i ʻole ka māmā holo piha (12 Mbps) ke kikowaena USB Host/Device interface
- Hiki ke hoʻohana pū ʻia me ke USB a hiki ke hoʻohana ʻia me kahi mea hoʻopili kelepona maʻalahi ke hoʻohana ʻia ka papa ma o VIN a i ʻole me nā dongle hiki ke hāʻawi i ka mana i ka papa aʻo ka hoʻopuka ʻana i ka Displayport a me ke USB. Hāʻawi ʻia kēlā mau dongle i kahi ethernet ma luna o ke awa USB, kahi 2 port USB hub a me kahi port USB-C hiki ke hoʻohana ʻia e hāʻawi i ka mana i ka ʻōnaehana.
Uaki Manawa maoli
Hiki i ka uaki Real Time ke mālama i ka manawa o ka lā me ka hoʻohana haʻahaʻa haʻahaʻa.
Laau Mana
Hana Papa
- Hoʻomaka - IDE
Inā makemake ʻoe e hoʻolālā i kāu Arduino® Portenta X8 i ka wā ma waho pono ʻoe e hoʻokomo i ka Arduino® Desktop IDE [1] No ka hoʻopili ʻana i ka mana Arduino® Edge i kāu kamepiula, pono ʻoe i kahi uwea USB Type-c. Hāʻawi kēia i ka mana i ka papa, e like me ka mea i hōʻike ʻia e ka LED. - Hoʻomaka - Arduino Web Lunahooponopono
ʻO nā papa Arduino® āpau, me kēia, hana ma waho o ka pahu ma ka Arduino® Web Lunahooponopono [2], ma ka hookomo wale ana i ka plugin maalahi. ʻO ka Arduino® Web Hoʻokipa ʻia ka Lunahooponopono ma ka pūnaewele, no laila e hoʻomau mau ʻia me nā hiʻohiʻona hou loa a me ke kākoʻo no nā papa āpau. E hahai i [3] e hoʻomaka i ka hoʻopaʻa inoa ma ka polokalamu kele pūnaewele a hoʻouka i kāu mau kiʻi kiʻi ma kāu papa. - E hoʻomaka - Arduino IoT Cloud
Kākoʻo ʻia nā huahana Arduino® IoT āpau ma Arduino® IoT Cloud e hiki ai iā ʻoe ke hoʻopaʻa inoa, ka pakuhi a me ka nānā ʻana i ka ʻikepili sensor, hoʻoulu i nā hanana, a hoʻomaʻamaʻa i kou home a ʻoihana paha. - Sample Nā kiʻi kiʻi
SampHiki ke loaʻa nā kiʻi kiʻi no ka Arduino® Portenta X8 ma ka "Examples" ma ka Arduino® IDE a i ʻole ma ka ʻāpana "Documentation" o ka Arduino Pro webkahua [4] - Nā kumuwaiwai pūnaewele
I kēia manawa ua hele ʻoe i nā kumu o ka mea hiki iā ʻoe ke hana me ka papa hiki iā ʻoe ke ʻimi i nā mea hiki ʻole ke hāʻawi ʻia ma ka nānā ʻana i nā papahana hoihoi ma ProjectHub [5], ka Arduino® Library Reference [6] a me ka hale kūʻai pūnaewele [7] kahi. hiki iā ʻoe ke hoʻokō i kāu papa me nā mea ʻike, nā mea hoʻokele a me nā mea hou aku. - Hoola Papa
Loaʻa i nā papa Arduino āpau kahi bootloader i kūkulu ʻia e hiki ai ke hoʻolohi i ka papa ma o USB. Inā hoʻopaʻa ʻia kahi kiʻi kiʻi i ke kaʻina hana a ʻaʻole hiki ke kiʻi hou ʻia ka papa ma o USB hiki ke komo i ke ʻano bootloader ma ke kaomi pālua ʻana i ke pihi hoʻihoʻi ma hope pono o ka mana.
ʻIke Mechanical
Pinout
Na Puwa Kauwa a me ka Papa Hoike
Nā palapala hōʻoia
| Palapala | Nā kikoʻī |
| CE (EU) | EN 301489-1
EN 301489-1 EN 300328 EN 62368-1 EN 62311 |
| WEEE (EU) | ʻAe |
| RoHS (EU) | 2011/65/(EU)
2015/863/(EU) |
| REACH (EU) | ʻAe |
| UKCA (UK) | ʻAe |
| RCM (RCM) | ʻAe |
| FCC (US) | ID.
Radio: Mahele 15.247 MPE: Māhele 2.1091 |
| RCM (AU) | ʻAe |
Hōʻike o ka Kulike CE DoC (EU)
Ke haʻi aku nei mākou ma lalo o kā mākou kuleana hoʻokahi e pili ana nā huahana i luna me nā koi koʻikoʻi o ka EU Directives a no laila ua kūpono i ka neʻe manuahi i loko o nā mākeke e pili ana i ka European Union (EU) a me ka European Economic Area (EEA).
Hōʻike i ka hoʻokō ʻana i ka EU RoHS & REACH 21101/19/2021
Hoʻopili nā papa Arduino i ka RoHS 2 Directive 2011/65/EU o ka European Parliament a me RoHS 3 Directive 2015/863/EU o ka Council of 4 June 2015 ma ka palena o ka hoʻohana ʻana i kekahi mau mea pōʻino i nā lako uila a me nā lako uila.
| mea waiwai | Ka palena kiʻekiʻe (ppm) |
| Kēpau (Pb) | 1000 |
| Kāmium (Cd) | 100 |
| Mercury (Hg) | 1000 |
| Hexavalent Chromium (Cr6+) | 1000 |
| Poly Brominated Biphenyls (PBB) | 1000 |
| Poly Brominated Diphenyl ethers (PBDE) | 1000 |
| Bis(2-Ethylhexyl} phthalate (DEHP) | 1000 |
| Benzyl butyl phthalate (BBP) | 1000 |
| Dibutyl phthalate (DBP) | 1000 |
| Diisobutyl phthalate (DIBP) | 1000 |
Hoʻokuʻu ʻia: ʻAʻole koi ʻia nā hoʻokuʻu.
Hoʻokō piha nā Papa Arduino i nā koi pili o ka European Union Regulation (EC) 1907/2006 e pili ana i ke kākau inoa, loiloi, ʻae a me ka hoʻopaʻa ʻana i nā mea kemika (REACH). ʻAʻole mākou e haʻi aku i kekahi o nā SVHC (https://echa.europa.eu/web/guest/candidate-list-table), ʻo ka Papa inoa o nā moho o ka manaʻo kiʻekiʻe loa no ka ʻae i hoʻokuʻu ʻia e ECHA i kēia manawa, aia i nā huahana āpau (a me ka pūʻolo pū kekahi) i ka nui o ka hoʻonui ʻana i ka ʻike like a i ʻole ma luna o 0.1%. I ka maikaʻi o ko mākou ʻike, ke haʻi aku nei mākou ʻaʻole i loaʻa i kā mākou huahana kekahi o nā mea i helu ʻia ma ka "Papa Manaʻo" (Annex XIV o nā lula REACH) a me nā Substances of Very High Concern (SVHC) i nā helu nui e like me ka mea i kuhikuhi ʻia. e ka Annex XVII o ka papa inoa moho i paʻi ʻia e ECHA (European Chemical Agency) 1907 /2006/EC.
Hōʻike Kūkākūkā Minerala
Ma ke ʻano he mea hoʻolako honua o nā ʻāpana uila a me ka uila, ʻike ʻo Arduino i kā mākou kuleana e pili ana i nā kānāwai a me nā hoʻoponopono e pili ana i nā Conflict Minerals, ʻo ia hoʻi ka Dodd-Frank Wall Street Reform and Consumer Protection Act, Section 1502. nā mineral e like me Tin, Tantalum, Tungsten, a i ʻole gula. Aia nā mineral conflict i loko o kā mākou huahana ma ke ʻano o ka solder, a i ʻole ma ke ʻano he ʻāpana i nā mea hao. Ma ke ʻano he ʻāpana o kā mākou mākau kūpono kūpono ua hoʻopili ʻo Arduino i nā mea hoʻolako ʻāpana i loko o kā mākou kaulahao lako e hōʻoia i ko lākou hoʻomau ʻana i nā lula. Ma muli o ka ʻike i loaʻa a hiki i kēia manawa ke haʻi aku nei mākou aia kā mākou huahana i nā Conflict Minerals i loaʻa mai nā wahi hakakā ʻole.
FCC akahele
ʻO nā hoʻololi a i ʻole nā hoʻololi i ʻae ʻole ʻia e ka ʻaoʻao kuleana no ka hoʻokō hiki ke hoʻopau i ka mana o ka mea hoʻohana e hana i nā lako.
Hoʻopili kēia mea hana i ka ʻāpana 15 o nā Rula FCC. Aia ka hana i nā kūlana ʻelua:
- ʻAʻole hiki i kēia mea hana ke hoʻopilikia ʻino
- pono e ʻae kēia hāmeʻa i nā hoʻopilikia i loaʻa, me ka hoʻopili ʻana i hiki ke hoʻokō i ka hana makemake ʻole.
ʻO FCC RF Radiation Exposure Statement:
- ʻAʻole pono e hoʻopili ʻia kēia Transmitter a i ʻole e hana pū me kekahi antenna a i ʻole transmitter.
- Hoʻopili kēia mea hana i nā palena hōʻike radiation RF i hoʻonohonoho ʻia no kahi kaiapuni ʻole.
- Pono e hoʻokomo a hana ʻia kēia mea hana me ka liʻiliʻi loa he 20cm ma waena o ka radiator a me kou kino.
Loaʻa i nā manuale mea hoʻohana no nā mea lekiō i hoʻokuʻu ʻia i ka laikini ka hoʻolaha ma lalo a i ʻole ka like ma kahi ʻike ʻia ma ka manual mea hoʻohana a i ʻole ma ka hāmeʻa a i ʻole nā mea ʻelua. Hoʻopili kēia hāmeʻa i nā maʻamau RSS i hoʻokuʻu ʻia i ka laikini ʻo Industry Canada. Aia ka hana i nā kūlana ʻelua:
- ʻAʻole hiki i kēia mea hana ke hoʻopilikia
- pono e ʻae kēia hāmeʻa i kekahi keakea, me ke keakea ʻana e hiki ai ke hoʻohana ʻole ʻia ka mea hana.
'Ōlelo Aʻo IC SAR:
'Ōlelo Pelekania Pono e ho'okomo a ho'ohana 'ia me ka li'ili'i loa he 20 knm ma waena o ka radiator a me kou kino.
mea nui: ʻAʻole hiki ke ʻoi aku ka mahana hana o ka EUT ma mua o 85 ℃ a ʻaʻole pono e emi ma lalo o -40 ℃.
Ma kēia, haʻi aku ʻo Arduino Srl e pili ana kēia huahana i nā koi koʻikoʻi a me nā ʻōlelo kūpono ʻē aʻe o Directive 201453/EU. Ua ʻae ʻia kēia huahana e hoʻohana ʻia ma nā mokuʻāina āpau o EU.
| Nā pūʻulu alapine | Ka mana puka kiʻekiʻe loa (ERP) |
| 2.4 GHz, 40 awāwa | +6dBm |
ʻIkepili Hui
| inoa hui | Arduino SRL |
| Wahi Hui | Via Andrea Appiani 25, 20900, MONZA MB, Italia |
Palapala Kuhikuhi
| Ref | loulou |
| Arduino IDE (Pakukau) | https://www.arduino.cc/en/Main/Software |
| Arduino IDE (Kapua) | https://create.arduino.cc/editor |
| Ka Hoʻomaka ʻana o Cloud IDE | https://create.arduino.cc/projecthub/Arduino_Genuino/getting-started-with-arduino- web-editor-4b3e4a |
| Arduino Pro Webpaena | https://www.arduino.cc/pro |
| Papahana Hub | https://create.arduino.cc/projecthub?by=part&part_id=11332&sort=trending |
| Ka Waihona Puke | https://github.com/arduino-libraries/ |
| Hale kūʻai pūnaewele | https://store.arduino.cc/ |
Hoʻololi Log
| Lā | Nā hoʻololi |
| 24/03/2022 | Hoʻokuʻu |
Palapala / Punawai
 |
ARDUINO ABX00049 Core Electronics Module [pdf] Palapala Hoʻohana ABX00049 Core Electronics Module, ABX00049, Core Electronics Module, Electronics Module, Module |
