Manual mai amfani
Saukewa: UTG1000
Aiki/Arbitrary Waveform Generator
Gabatarwa
Masoya Masu Amfani:
Sannu! Godiya da zabar wannan sabuwar na'urar Uni-Trend. Domin amfani da wannan kayan aikin lafiya kuma daidai, da fatan za a karanta wannan jagorar sosai, musamman sashin Bayanan Tsaro.
Bayan karanta wannan jagorar, ana ba da shawarar a ajiye littafin a wuri mai sauƙi, wanda zai fi dacewa kusa da na'urar, don tunani a gaba.
Bayanin Haƙƙin mallaka
UNl-T ita ce Uni-Trend Technology (China) Limited. An kiyaye duk haƙƙoƙi.
Kayayyakin UNI-T ana kiyaye su ta hanyar haƙƙin mallaka a China da sauran ƙasashe, gami da haƙƙin mallaka da aka bayar da masu jiran aiki.
Uni-Trend yana tanadi haƙƙin kowane ƙayyadaddun samfur da canje-canjen farashin.
Uni-Trend yana da haƙƙin mallaka. Samfuran software masu lasisi mallakin Uni-Trend da rassan sa ko masu siyar da su, waɗanda dokokin haƙƙin mallaka na ƙasa da tanadin yarjejeniyar ƙasa da ƙasa ke kiyaye su. Bayani a cikin wannan jagorar ya zarce duk nau'ikan da aka buga a baya.
UNI-T alamar kasuwanci ce mai rijista ta Uni-Trend Technology (China) Limited.
Uni-Trend yana ba da garantin cewa wannan samfurin ba zai zama mara lahani na tsawon shekaru uku ba. Idan an sake siyar da samfurin, lokacin garanti zai kasance daga ranar siyan asali daga mai rarraba UNI-T mai izini. Binciken, sauran na'urorin haɗi, da fis ba a haɗa su cikin wannan garanti ba.
Idan samfurin ya tabbata yana da lahani a cikin lokacin garanti, Uni-Trend yana da haƙƙin ko dai gyara gurɓataccen samfurin ba tare da cajin kowane sassa ko aiki ba, ko musanya gurɓataccen samfurin zuwa samfurin aiki daidai. ɓangarorin maye gurbin da samfuran ƙila su zama sababbi, ko yin aiki iri ɗaya da sabbin samfura. Duk ɓangarorin maye gurbin, samfura, da samfuran mallakin Uni-Trend ne.
“abokin ciniki” yana nufin mutum ko mahaɗan da aka ayyana a cikin garanti. Domin samun sabis na garanti, "abokin ciniki" dole ne ya sanar da lahani a cikin lokacin garanti ga UNI-T, kuma don yin shirye-shirye masu dacewa don sabis na garanti. Abokin ciniki zai ɗauki alhakin tattarawa da jigilar samfuran da suka lalace zuwa cibiyar kulawa da aka keɓe na UNI-T, biyan kuɗin jigilar kaya, da samar da kwafin rasidin sayan na ainihin mai siye. Idan an aika samfurin cikin gida zuwa wurin cibiyar sabis na UNI-T, UNI-T za ta biya kuɗin jigilar kaya. Idan an aika samfurin zuwa kowane wuri, abokin ciniki zai ɗauki alhakin duk jigilar kaya, ayyuka, haraji, da duk wani kuɗi.
Wannan garantin ba zai shafi kowace lahani ko lalacewa ta hanyar haɗari, lalacewa da tsagewar sassan inji, rashin amfani da rashin dacewa, da rashin dacewa ko rashin kulawa. UNI-T a ƙarƙashin tanadin wannan garanti ba shi da alhakin samar da ayyuka masu zuwa:
a) Duk wani lalacewar gyare-gyaren da ya haifar ta hanyar shigarwa, gyare-gyare, ko kula da samfurin ta wakilan sabis na UNI-T.
b) Duk wani lalacewar gyara da ya haifar ta rashin amfani ko haɗin kai zuwa na'urar da ba ta dace ba.
c) Duk wani lalacewa ko rashin aiki da aka samu ta hanyar amfani da tushen wutar lantarki wanda bai dace da buƙatun wannan littafin ba.
d) Duk wani gyare-gyare akan samfuran da aka canza ko haɗin kai (idan irin wannan canji ko haɗin kai ya haifar da haɓakar lokaci ko wahalar kiyaye samfur).
Wannan garantin da UNI-T ta rubuta don wannan samfur, kuma ana amfani da shi don musanya kowane garanti na bayyana ko bayyananne. UNI-T da masu rarraba ta ba sa bayar da kowane garanti mai ma'ana don kasuwanci ko dalilai masu dacewa.
Don keta wannan garanti, UNI-T ke da alhakin gyara ko maye gurbin samfuran da ba su da lahani shine kawai magani da ake samu ga abokan ciniki. Ko da kuwa ko an sanar da UNI-T da masu rarraba ta cewa duk wani lalacewa kai tsaye, na musamman, na faruwa, ko kuma wani lahani na iya faruwa, UNI-T da masu rarraba ta ba za su ɗauki alhakin kowane lalacewa ba.
Garanti
UNI-T yana ba da garantin cewa samfurin zai zama mara lahani na tsawon shekaru uku. Idan an sake siyar da samfurin, lokacin garanti zai kasance daga ranar siyan asali daga mai rarraba UNI-T mai izini. Binciken, sauran na'urorin haɗi, da fis ba a haɗa su cikin wannan garanti ba.
Idan samfurin ya tabbata yana da lahani a cikin lokacin garanti, UNI-T yana tanadin haƙƙin ko dai gyara gurɓataccen samfurin ba tare da cajin sassa da aiki ba, ko musanya gurɓataccen samfurin zuwa samfurin aiki daidai. ɓangarorin maye gurbin da samfuran ƙila su zama sababbi, ko yin aiki iri ɗaya da sabbin samfura. Duk ɓangarorin maye gurbin, kayayyaki, da samfuran sun zama mallakin UNI-T.
“abokin ciniki” yana nufin mutum ɗaya ko mahaɗan da aka ayyana a cikin garanti. Domin samun sabis na garanti, "abokin ciniki" dole ne ya sanar da lahani a cikin lokacin garanti ga UNI-T, kuma don yin shirye-shirye masu dacewa don sabis na garanti. Abokin ciniki zai ɗauki alhakin tattarawa da jigilar samfuran da suka lalace zuwa cibiyar kulawa da aka keɓe na UNI-T, biyan kuɗin jigilar kaya, da samar da kwafin rasidin sayan na ainihin mai siye. Idan an aika samfurin cikin gida zuwa wurin cibiyar sabis na UNI-T, UNI-T za ta biya kuɗin jigilar kaya. Idan an aika samfurin zuwa kowane wuri, abokin ciniki zai ɗauki alhakin duk jigilar kaya, ayyuka, haraji, da duk wani kuɗi.
Wannan garantin ba zai shafi kowace lahani ko lalacewa ta hanyar haɗari, lalacewa da tsagewar kayan inji, rashin amfani da rashin dacewa, da rashin dacewa ko rashin kulawa. UNI-T a ƙarƙashin tanadin wannan garanti ba shi da alhakin samar da ayyuka masu zuwa:
a) Duk wani lalacewar gyare-gyaren da ya haifar ta hanyar shigarwa, gyare-gyare, ko kula da samfurin ta wakilan sabis na UNI-T.
b) Duk wani lalacewar gyara da ya haifar ta rashin amfani ko haɗin kai zuwa na'urar da ba ta dace ba.
c) Duk wani lalacewa ko rashin aiki da aka samu ta hanyar amfani da tushen wutar lantarki wanda bai dace da buƙatun wannan littafin ba.
d) Duk wani gyare-gyare akan samfuran da aka canza ko haɗin kai (idan irin wannan canji ko haɗin kai ya haifar da haɓakar lokaci ko wahalar kiyaye samfur).
Wannan garantin da UNI-T ta rubuta don wannan samfur, kuma ana amfani da shi don musanya kowane takamaiman garanti ko fayyace.
UNI-T da masu rarraba ta ba sa bayar da kowane garanti mai ma'ana don kasuwanci ko dalilai masu dacewa.
Don keta wannan garanti, UNI-T ke da alhakin gyara ko maye gurbin samfuran da ba su da lahani shine kawai magani da ake samu ga abokan ciniki. Ko da kuwa ko an sanar da UNI-T da masu rarraba ta cewa duk wani lalacewa kai tsaye, na musamman, na faruwa, ko kuma wani lahani na iya faruwa, UNI-T da masu rarraba ta ba za su ɗauki alhakin kowane lalacewa ba.
Gabaɗaya Safety Overview
Wannan kayan aikin yana bin ƙa'idodin aminci don kayan aunawa na lantarki GB4793 da ƙimar aminci IEC 61010-1 yayin ƙira da masana'anta. Da fatan za a fahimci matakan kariya masu zuwa masu zuwa, don guje wa rauni na mutum, da kuma hana lalacewa ga samfur ko duk wani samfuran da aka haɗa.
Don guje wa yuwuwar hatsarori, tabbatar da amfani da wannan samfur daidai da ƙa'idodi.
Ma'aikatan da aka horar da su ne kawai za su iya aiwatar da shirin kulawa.
Guji wuta da rauni na mutum.
Yi amfani da madaidaicin layin wutar lantarki: Yi amfani da keɓaɓɓen wutar lantarki na UNI-T da aka naɗa zuwa yanki ko ƙasa don wannan samfurin.
Madaidaicin Plug: Kar a toshe lokacin bincike ko wayar gwaji an haɗa da voltage tushen.
Ƙarƙashin samfurin: Wannan samfurin yana ƙasa ta hanyar wayar ƙasa mai samar da wutar lantarki. Don guje wa girgizar wutar lantarki, dole ne a haɗa masu sarrafa ƙasa zuwa ƙasa. Da fatan za a tabbatar cewa samfurin yana ƙasa da kyau kafin haɗi zuwa shigarwa ko fitarwa na samfurin.
Daidaitaccen haɗin binciken oscilloscope: Tabbatar cewa ƙasan binciken da yuwuwar ƙasa suna da alaƙa daidai. Kar a haɗa wayar ƙasa zuwa babban voltage.
Bincika duk ƙimar tasha: Don guje wa wuta da babban cajin halin yanzu, da fatan za a duba duk ƙimar da alamomin samfurin. Da fatan za a kuma koma zuwa littafin jagorar samfur don cikakkun bayanai kan kimantawa kafin haɗawa da samfurin.
Kar a buɗe murfin shari'ar ko ɓangaren gaba yayin aiki
Yi amfani da fis kawai tare da kima da aka jera a cikin fihirisar fasaha
Guji bayyanawa da'ira: Kar a taɓa masu haɗawa da abubuwan haɗin da aka fallasa bayan an haɗa wuta.
Kada ku sarrafa samfurin idan kuna zargin kuskure ne, kuma da fatan za a tuntuɓi ma'aikatan sabis masu izini na UNI-T don dubawa. Duk wani gyare-gyare, daidaitawa, ko maye gurbin sassa dole ne ma'aikatan kulawa masu izini na UNI-T su yi.
Kula da iska mai kyau
Don Allah kar a sarrafa samfurin a cikin yanayi mai ɗanɗano
Don Allah kar a yi aiki a cikin yanayi mai ƙonewa da fashewa
Da fatan za a kiyaye saman samfurin a tsabta kuma ya bushe
Sharuɗɗan Tsaro da Alamomi
Waɗannan sharuɗɗa na iya bayyana a cikin wannan littafin:
Gargaɗi: Yanayi da ɗabi'u na iya yin haɗari ga rayuwa.
Lura: Sharuɗɗa da halaye na iya haifar da lalacewa ga samfur da sauran kaddarorin.
Sharuɗɗa masu zuwa na iya bayyana akan samfurin:
Haɗari: Yin wannan aikin na iya haifar da lalacewa nan take ga ma'aikacin.
Gargaɗi: Wannan aikin na iya haifar da yuwuwar lalacewa ga mai aiki.
Lura: Wannan aiki na iya haifar da lalacewa ga samfur da na'urorin da aka haɗa da samfurin.
Alamun masu zuwa na iya bayyana akan samfurin:
Babi na 1- Jagorar Gabatarwa
1.1 Sharuɗɗan Tsaro da Alamomi
Waɗannan sharuɗɗa na iya bayyana a cikin wannan littafin:
Gargaɗi: Yanayi da ɗabi'u na iya yin haɗari ga rayuwa.
Lura: Sharuɗɗa da halaye na iya haifar da lalacewa ga samfur da sauran kaddarorin.
Sharuɗɗa masu zuwa na iya bayyana akan samfurin:
Haɗari: Yin wannan aikin na iya haifar da lalacewa nan take ga mai aiki.
Gargaɗi: Wannan aikin na iya haifar da yuwuwar lalacewa ga mai aiki.
Lura: Wannan aiki na iya haifar da lalacewa ga samfur da na'urorin da aka haɗa da samfurin.
Alamomi akan samfurin.
Alamun masu zuwa na iya bayyana akan samfurin:
 |
Madadin Yanzu |
 |
Tashar ƙasa don Gwaji |
 |
Terminal na ƙasa don Chassis |
 |
Kunnawa/Kashe Button |
 |
Babban Voltage |
 |
Tsanaki! Koma zuwa Manual |
 |
Tashar Tashar Kariya |
 |
Tambarin CE alamar kasuwanci ce mai rijista ta Tarayyar Turai. |
 N0149 |
Tambarin C-tick alamar kasuwanci ce mai rijista ta Ostiraliya. |
| (40) | Lokacin Amfani da Kariyar Muhalli (EPUP) |
1.2 Gabaɗaya Tsaron Tsaroview
Wannan kayan aikin yana bin ka'idodin aminci na GB4793 don kayan lantarki da daidaitaccen aminci na EN61010-1/2 yayin ƙira da masana'anta. Ya bi ka'idodin aminci don keɓaɓɓen voltage misali CAT II 300V da gurɓataccen matakin II.
Da fatan za a karanta matakan kariya na aminci masu zuwa:
Don guje wa girgiza wutar lantarki da wuta, da fatan za a yi amfani da keɓaɓɓen wutar lantarki na UNI-T da aka naɗa zuwa yanki ko ƙasa don wannan samfur.
Wannan samfurin yana ƙasa ta hanyar wayar ƙasa mai samar da wutar lantarki. Don guje wa girgizar wutar lantarki, dole ne a haɗa masu sarrafa ƙasa zuwa ƙasa. Da fatan za a tabbatar cewa samfurin yana ƙasa sosai kafin haɗawa da shigarwar ko fitarwa na samfurin.
Don guje wa rauni na sirri da hana lalata samfurin, ma'aikatan da aka horar kawai zasu iya aiwatar da shirin kulawa.
Don guje wa gobara ko girgiza wutar lantarki, da fatan za a lura da ƙimar aiki da alamun samfur. Kada kayi amfani da samfurin a wajen kewayon da aka kimanta.
Da fatan za a bincika na'urorin haɗi don kowane lalacewar inji kafin amfani.
Yi amfani da na'urorin haɗi kawai waɗanda suka zo tare da wannan samfurin.
Don Allah kar a sanya abubuwa na ƙarfe a cikin mashigai da tashoshi na wannan samfur.
Kada ku sarrafa samfurin idan kuna zargin kuskure ne, kuma da fatan za a tuntuɓi ma'aikatan sabis masu izini na UNI-T don dubawa.
Don Allah kar a sarrafa samfurin lokacin da akwatin kayan aiki ya buɗe.
Don Allah kar a sarrafa samfurin a cikin yanayi mai ɗanɗano.
Da fatan za a kiyaye saman samfurin a tsabta kuma ya bushe.
Idan an yi amfani da kayan aikin ta hanyar da masana'anta ba su kayyade ba, kariyar da kayan aikin ke bayarwa na iya lalacewa.
Babi na 2 Gabatarwa
Wannan na'urar tana da tattalin arziƙi, babban aiki, mai yawan aiki guda ɗaya tashoshi janareta. Yana amfani da fasahar haɗin dijital kai tsaye (DDS) don samar da ingantattun sifofin igiyoyin igiyar ruwa, tare da ƙuduri mai ƙarancin 1μHz. Yana iya samar da ingantattun siginonin fitarwa, tsayayye, tsantsa da ƙananan murdiya, kuma yana iya samar da raƙuman murabba'i mai tsayi a tsaye. Ingantacciyar hanyar sadarwa ta UTG1000, madaidaitan fihirisar fasaha da salon nunin hoto mai dacewa na iya taimaka wa masu amfani don kammala ayyuka cikin sauri da inganta aikin aiki.
2.1 Babban Halayen
- Fitowar igiyar igiyar ruwa na 20MHz/10MHz/5MHz, cikakken ƙudurin kewayon mitar shine 1μHz
- Siffar kalaman murabba'i/ bugun bugun jini na 5MHz, da tashin sa, faɗuwa, da lokacin zagayowar aiki ana daidaita su.
- Amfani da hanyar aiwatar da DDS, tare da 125M/sampling rate da 14bits ƙuduri a tsaye
- Babban madaidaicin mitar mitar 6-bit wanda ya dace da matakin TTL
- Ma'ajiyar igiyar igiyar ruwa ta maki 2048, kuma tana iya adana har zuwa ƙungiyoyin 16 na nau'ikan raƙuman raƙuman raƙuman ƙima.
- Nau'in daidaitawa masu yawa: AM, FM, PM, TAMBAYA, FSK, PSK, PWM
- Software mai ƙarfi na PC
- 4.3-inch babban ƙuduri TFT ruwa crystal nuni
- Daidaitaccen yanayin daidaitawa: Na'urar USB
- Yana goyan bayan gyare-gyaren ciki/na waje da fararwa na ciki/ waje/manual
- Yana goyan bayan fitar da shara
- Sauƙaƙe don amfani ƙulli mai aiki da yawa da madannai lambobi
2.2 Panels da Buttons
2.2.1 Gaban gaba
Jerin UTG1000A yana ba masu amfani da sauƙi, fahimta, da sauƙi don aiki na gaba. Ana nuna panel na gaba a cikin adadi 2-1:
- Allon Nuni
4.3-inch TFT LCD yana nuna yanayin fitarwa mai girma, menu na aiki, da sauran mahimman bayanan tashoshi. An ƙirƙira shi don sa hulɗar ɗan adam da kwamfuta ta fi dacewa don inganta ingantaccen aiki. - Kunnawa/Kashe Button
Don kunna/kashe na'urar, danna wannan maɓallin kuma hasken bayansa zai kunna (orange), nunin zai nuna ƙirar aikin bayan allon taya. - Menu Operation Softkeys
Daidai zaɓi ko duba abin da ke cikin lakabin ta hanyar gano alamun softkey (a ƙasan aikin keɓancewa). - Aiki na taimako da Maɓallin Saitunan Tsarin
Wannan maɓallin ya ƙunshi alamun ayyuka 3: saitunan tashoshi, mita mita, da tsarin. Alamar da aka yi wa alama (tsakiyar alamar launin toka ne kuma font ɗin fari ne) yana da ƙaramin lakabin daidai a kasan nuni. - Maɓallin Ƙarfafawa na Manual
Saita fararwa, da aiwatar da fararwa ta hannu lokacin walƙiya. - Modulation/Mitar Mitar Shigar Tasha/Tarfafa Fitar Tashar
A lokacin siginar AM, FM, PM ko PWM, lokacin da tushen daidaitawa na waje, siginar daidaitawa shine shigarwa ta hanyar shigar da na'ura ta waje. Lokacin da aikin mitoci ke kunne, siginar da za a auna ana shigar da ita ta wannan keɓancewa; lokacin da aka kunna siginar tashoshi da hannu, siginar faɗakarwa na hannu yana fitowa ta wannan hanyar sadarwa. - Tashar Fitar da Aiki tare
Wannan maɓallin yana sarrafa ko buɗe fitarwa na aiki tare ko a'a. - CH Control/fitarwa
Za'a iya kunna fitar da tashar tashoshi da sauri ta latsa maɓallin Channel, Hakanan ana iya saita ta ta danna maɓallin Utility don buɗe lakabin, sannan danna maɓallin Setting na Channel. - Maɓallin Jagoranci
Lokacin saita sigogi, matsa hagu da dama don canza bit na lamba. - Maɓallin Multifunctional da Button
Juya madannin ayyuka da yawa don canza lambobi (juyawa agogon agogo da lambobi suna ƙaruwa) ko amfani da ƙwanƙolin ayyuka masu yawa azaman maɓallin jagora. Latsa maɓallin ayyuka da yawa don zaɓar aiki, saita sigogi da tabbatar da zaɓi. - Allon madannai mai lamba
Ana amfani da madannai na lamba don shigar da siga lamba 0 zuwa 9, ma'auni na decimal "." da maɓallin alamar "+/-". Maki goma na iya canza raka'a cikin sauri. - Maballin Menu
Alamomin ayyuka 3 zasu tashi ta danna maɓallin menu: Waveform, Modulation, da Sweep. Latsa maɓallin menu mai dacewa daidai don samun aikin sa. - Softkeys Menu na Aiki
Don zaɓar menu na ayyuka da sauri
2.2.2 Rear Panel
Ana nuna panel na baya a cikin adadi 2-2:
- USB Interface
Ana haɗa software ta PC ta wannan kebul na USB. - Ramin Rarraba Zafi
Don tabbatar da cewa wannan kayan aikin ya watsar da zafi sosai, don Allah kar a toshe waɗannan ramukan. - Inshora Bututu
Lokacin shigar AC halin yanzu ya fi 2A, fis ɗin zai yanke shigar da AC don kare na'urar. - Babban Canjin Wuta
Danna ƙasa kan “I” don kunna kayan aikin, kuma danna ƙasa “O” don yanke shigar da AC. - Wurin shigar da wutar AC
Wannan na'urar tana goyan bayan ƙarfin AC daga 100V zuwa 240V, 45Hz zuwa 440 Hz, kuma ƙarfin da aka haɗa shine 250V, T2 A.
2.2.3 Interface Mai Aiki
Ana nuna aikin dubawa a cikin adadi 2-3:
Cikakken Bayani:
- Bayanin tashar: 1) "ON / KASHE" a gefen hagu shine bayanan bude tashar. 2) Akwai tambarin "Iyaka" yana nuna iyakar kewayon fitarwa inda fari yake aiki kuma launin toka mara inganci. Madaidaicin madaidaicin tashar fitarwa (1Ω zuwa 1KΩ daidaitacce, ko tsayin juriya, tsohowar masana'anta shine 50Ω). 3) Gefen dama shine tsarin igiyar ruwa mai aiki na yanzu.
- Lakabin Softkey: Ana amfani da alamun Softkey don gano ayyukan maɓalli mai laushi da ayyukan menu na softkey.
1) Lakabi a hannun dama na allo: Nuni mai haske yana nuna cewa an zaɓi alamar. In ba haka ba, danna maɓalli mai dacewa don zaɓar.
2) Takamaimai a kasan allo: Abubuwan da ke cikin lakabin suna zuwa nau'in nau'in lakabin na gaba. Danna maɓallin dacewa don zaɓar ƙananan lakabi. - Lissafin Sigar Waveform: Yana nuna sigogi na tsarin motsi na yanzu a cikin jeri.
- Wurin Nuni na Waveform: Yana Nuna tsarin kalaman tasha na yanzu.
Babi na 3 Saurin Farawa
3.1 Gabaɗaya Dubawa
Ana ba da shawarar bin matakan da ke ƙasa don bincika kayan aikin kafin amfani da wannan na'urar a karon farko.
3.1.1 Bincika Lalacewar da Sufuri Ke Haɗuwa
Idan kwandon marufi ko kumfa na filastik filastik sun lalace sosai, tuntuɓi mai rarraba UNI-T na wannan samfurin nan da nan.
Idan kayan aiki ya lalace ta hanyar sufuri, don Allah a ajiye kunshin kuma tuntuɓi sashen sufuri da masu rarraba UNI-T, mai rarrabawa zai shirya gyara ko sauyawa.
3.1.2 Duba Na'urorin haɗi
Na'urorin haɗi na UTG1000 sune: Igiyar wuta, kebul na bayanai na USB, kebul na BNC (mita 1), da CD mai amfani.
Idan ɗayan na'urorin haɗi ya ɓace ko ya lalace, tuntuɓi UNI-T ko masu rarraba na gida na wannan samfur.
3.1.3 Binciken Inji
Idan kayan aikin ya bayyana ya lalace, baya aiki da kyau, ko ya gaza gwajin aikin, tuntuɓi UNI-T ko masu rarraba na gida na wannan samfurin.
3.2 Gudanar da Daidaitawa
UTG1000 jerin rike za a iya gyara da yardar kaina. Idan ana buƙatar canja wurin riƙon, da fatan za a riƙa riƙon
3.3 Babban Fitowar Waveform
3.3.1 Saitin Mita
Tsohuwar igiyar igiyar ruwa: Kalaman sine na mitar 1kHz da 100mV amplitude (tare da 50Ω ƙarewa).
Ana nuna matakan canza mitar zuwa 2.5MHz kamar haka:
a) Latsa Menu → Waveform → Parameter → Mitar juyawa zuwa yanayin saitin mita. Saita sigogi ta latsa Frequencysoftkey don canza mita da lokaci.
b) Yi amfani da madannai na lamba don shigar da lambar da ake buƙata na 2.5.
c) Zaɓi naúrar da ta dace da MHz.
3.3.2 AmpSaitin litude
Defaultwaveform: Sine na 100mV ƙimar kololuwar ƙima tare da ƙarewar 50Ω.
Matakai don canza ampAna nuna litude zuwa 300mV kamar haka:
- Latsa Menu→Waveform→Parameter→Amplitude bi da bi. Latsa Amplitudesoftkey na iya sake canzawa tsakanin Vpp, Vrms, da dBm.
- Yi amfani da maɓallan lamba don shigar da 300.
- Zaɓi naúrar da ake buƙata: Latsa naúrar softkeymVpp.
Lura: Ana iya saita wannan siga ta ƙulli mai aiki da yawa da maɓallan shugabanci.
3.3.3 DC Kayyade Voltage Saiti
Tsohuwar igiyar igiyar ruwa ita ce igiyar ruwa tare da 0V DC voltage (tare da ƙarewar 50Ω) .matakai don canza canjin DC voltage zuwa -150mV ana nuna su kamar haka:
- Latsa Menu → Waveform → Parameter → Kashe don shigar da saitin sigina.
- Yi amfani da maɓallan lamba don shigar da lambar da ake buƙata ta -150.
- Zaɓi naúrar mV.
Lura: Ana iya saita wannan siga ta ƙulli mai aiki da yawa da maɓallan shugabanci.
3.3.4 Saitin Wave Square
Latsa Menu→Waveform→Type→Squarewave→Parameter bi da bi (latsa Typesoftkey don zaɓar kawai lokacin da ba a yi alama ba). Idan ana buƙatar saita siga, danna maɓallin softkey mai dacewa don shigar da ƙimar lamba da ake buƙata kuma zaɓi naúrar.
Lura: Ana iya saita wannan siga ta ƙulli mai aiki da yawa da maɓallan shugabanci.
3.3.5 Saitin Wave Pulse
Zagayowar aikin tsoho na bugun bugun jini shine 50% kuma lokacin tashi / faɗuwar gefen shine 1us. Matakai don saita raƙuman murabba'in tare da lokacin 2ms, 1.5Vpp amplitude, 0V DC biya diyya da 25% wajibi sake zagayowar (iyakance da mafi ƙarancin bugun jini nisa ƙayyadaddun 80ns), 200us tashi lokaci da 200us fadowa lokaci ana gani kamar haka:
Latsa Menu→Waveform→Type→PulseWave→Parameter bi da bi, sannan danna Frequencysoftkey don canzawa zuwa Period.
Shigar da ƙimar lambar da ake buƙata kuma zaɓi naúrar. Lokacin shigar da ƙimar sake zagayowar aiki, akwai lakabi mai sauri a ƙasan nuni, kuma zaɓi 25%.
Idan ana buƙatar saita lokacin faɗuwa, danna Parametersoftkey ko juya maɓalli masu yawa zuwa dama don shigar da lakabin ƙasa, sannan danna Falling Edgesoftkey don shigar da lambar da ake buƙata kuma zaɓi naúrar. 
3.3.6 DC Voltage Saiti
A zahiri, DC voltage fitarwa shine saitin saitin DC. Matakai don canza canjin DC voltage zuwa 3V ana gani kamar haka:
- Latsa Menu → Waveform → Nau'in → DC bi da bi don shigar da yanayin saitin sigina.
- Yi amfani da madannai na lamba don shigar da lambar da ake buƙata na 3.
- Zaɓi naúrar da ake buƙata V
Lura: Ana iya saita wannan siga ta ƙulli mai aiki da yawa da maɓallan shugabanci.
3.3.7 Ramp Saitin Wave
Tsohuwar darajar siminti na ramp kalaman ne 100%. Matakai don saita igiyoyin triangular tare da mitar 10kHz, 2V amplitude, 0V DC biya diyya da 50% wajibi sake zagayowar ana gani kamar haka:
Latsa Menu → Waveform → Nau'in → RampWave→Parameter bi da bi don shigar da yanayin saitin sigina. Zaɓi siga don shigar da yanayin gyarawa, sannan shigar da lambobi da ake buƙata kuma zaɓi naúrar. Lura: Lokacin shigar da ƙimar darajar ƙimar, akwai alamar 50% a ƙasan nuni, danna maɓallin softkey mai dacewa ko amfani da madannai na lamba. 
Lura: Ana iya saita wannan siga ta ƙulli mai aiki da yawa da maɓallan shugabanci.
3.3.8 Saitin Kalaman Amo
Default Quasi Gauss amo amplitude ne 100mVpp da DC biya diyya ne 0mV. Matakai don saita Quasi Gauss amo tare da 300mVpp amplitude da 1V DC diyya ana nuna su kamar haka:
Latsa Menu → Waveform → Nau'in → Noise → Siga don shigar da yanayin daidaitawa. Bayan saitin, shigar da lambar da ake buƙata da naúrar. 
Lura: Ana iya saita wannan siga ta ƙulli mai aiki da yawa da maɓallan shugabanci.
3.4 Ma'aunin Mita
Wannan na'urar ta dace don auna mitar da zagayowar aiki na sigina masu dacewa da TTL, tare da kewayon mitar 1Hz zuwa 100MHz. Mitar mitar tana ɗaukar sigina ta hanyar shigar da bayanai (Input/CNT tasha). Latsa Utility sannan Counter don tattara Matsakaicin, Tsawon lokaci, da ƙimar Ayyukan Ayyuka daga siginar shigarwa. Lura: Lokacin da babu shigarwar sigina, lissafin mitar mitar koyaushe yana nuna ƙimar awo ta ƙarshe. Mitar mitar za ta wartsake kawai lokacin da sabon siginar da ya dace da TTL ya kasance a tashar Input/CNT. 
3.5 Tsarin Taimako na Gina
Tsarin taimakon ginawa yana ba da bayanan da suka dace don kowane maɓalli ko softkey menu. Hakanan zaka iya amfani da jerin abubuwan taimako don samun taimako. Ana nuna bayanan taimakon maɓalli kamar haka:
Dogon danna kowane maɓallin softkey ko maɓalli don nuna bayanan da suka dace. Idan abun ciki ya wuce girman allo 1, yi amfani 
softkey ko kullin ayyuka da yawa don nuna allo na gaba. Danna "Koma" don fita.
A kula!
Tsarin taimakon da aka gina a ciki yana samar da sauƙaƙan yarukan Sinanci da Ingilishi. Dukkan bayanai, taimakon mahallin da batun taimako ana nuna su a cikin yare da aka zaɓa. Saitin Harshe: Utility→ Tsari → Harshe.
Babi na 4 Babban Aikace-aikace
4.1 Modulation Waveform Fitarwa
4.1.1 AmpLitude Modulation (AM)
Latsa Menu→Modulation→Type→ AmpLitude Modulation bi da bi don fara aikin AM. Sa'an nan tsarin igiyar ruwa da aka daidaita zai fita tare da tsarin motsin motsi da saitin igiyoyin motsi.
Zaɓin Waveform mai ɗaukar kaya
AM mai ɗaukar motsi na iya zama: igiyar ruwa, igiyar murabba'i, ramp igiyar ruwa ko igiyar ruwa ta sabani (sai dai DC), kuma tsoho shine igiyar ruwa. Bayan zaɓin tsarin AM, danna maɓalli mai taushin maɓalli na Wave Parameter don shigar da ƙirar zaɓen mai ɗaukar hoto. 
Saitin Mitar Wave Mai ɗauka
Saitacce kewayon mitar kalaman mai ɗaukar kaya ya bambanta don nau'ikan igiyoyin motsi daban-daban. Tsohuwar mitar duk igiyoyin jigilar kaya shine 1kHz. Ana iya ganin kewayon saitin mitar kowane igiyar jigilar kaya a cikin tebur mai zuwa:
| Wave mai ɗaukar nauyi | Yawanci | |||||
| Saukewa: UTG1020A | Saukewa: UTG1010A | Saukewa: UTG1005A | ||||
| Mafi ƙarancin ƙima | Matsakaicin Daraja | Mafi ƙarancin ƙima | Matsakaicin Daraja | Mafi ƙarancin Daraja |
Matsakaicin Daraja |
|
| Sine Wave | 1pHz | 10MHz | 1pHz | 10MHz | 1pHz | 5MHz |
| Ƙwallon ƙafa | 1pHz | 5MHz | 1pHz | 5MHz | 1pHz | 5MHz |
| Ramp Wave | 1pHz | 400kHz | 1pHz | 400kHz | 1pHz | 400 kz |
| Wave na sabani | 1pHz | 3MHz | 1pHz | 2MHz | 1pHz | 1MHz |
Idan ana buƙatar saita mitar mai ɗaukar kaya, da fatan za a danna Parameter→ Frequencysoftkey, sannan shigar da ƙimar lambobi da ake buƙata, kuma zaɓi naúrar bayan zaɓin tsarin motsi mai ɗauka.
Zaɓin Tushen Modulation
Wannan na'urar na iya zaɓar tushen canji na ciki ko tushen daidaitawa na waje. Bayan kunna aikin AM, tsohuwar tushen daidaitawa na ciki. Idan ana buƙatar canza latsa Parameter → ModulationSource → Na waje bi da bi.
- Tushen Ciki
Lokacin da tushen gyare-gyare ya kasance na ciki, kalaman daidaitawa na iya zama: igiyar ruwa, kalaman murabba'i, tashi ramp kalaman, fadowa ramp kalaman ruwa, kalaman sabani da hayaniya. Bayan kunna aikin AM, tsohowar kalaman daidaitawa shine sine wave. Idan ana buƙata don canza shi, danna Mai ɗauka Wave →Parameter → Nau'in bi da bi.
Square kalaman: aikin sake zagayowar shine 50%
Tashi Ramp Wave: darajar simmetry shine 100%
Faduwa Ramp Wave: darajar simmetry shine 0%
Wave Mai Arbitrary: lokacin da aka canza yanayin igiyar ruwa ta sabani, janareta aikin DDS yana iyakance tsayin igiyar igiyar ruwa kamar 1kpts ta hanyar zaɓin bazuwar.
Surutu: Farin Hayaniyar Gauss - Source na waje
Lokacin da tushen daidaitawa ya kasance waje, lissafin sigina zai ɓoye zaɓin motsin motsi da zaɓin daidaitawa, kuma za'a canza tsarin igiyar jigilar kaya ta hanyar motsi na waje. Ana sarrafa zurfin juzu'i na AM ta ± 5V matakin sigina na tashar shigar da na'ura ta waje. Don misaliample, idan an saita ƙimar zurfin daidaitawa zuwa 100%, fitowar AM amplitude shine matsakaicin lokacin da siginar daidaitawa ta waje ta kasance +5V, fitowar AM amplitude shine mafi ƙarancin lokacin da siginar daidaitawa ta waje shine -5V.
Saitin Mitar Siffar Modulation
Lokacin da tushen gyare-gyare ya kasance na ciki, ana iya daidaita mitar sifar daidaitawa. Bayan kunna aikin AM, kewayon mitar kalaman daidaitawa shine 2mHz ~ 50kHz (tsoho shine 100Hz). Latsa Siga →Yawan Modulation don canzawa. Lokacin da tushen daidaitawa ya kasance waje, lissafin sigina zai ɓoye zaɓin sifar daidaitawa da zaɓin daidaitawa, kuma za'a canza tsarin igiyar jigilar kaya ta hanyar motsi na waje. Matsakaicin shigar da siginar daidaitawa daga waje shine 0Hz ~ 20Hz.
Tsarin Zurfin Modulation
Zurfin daidaitawa yana nuna girman ampbambancin litude kuma an bayyana shi azaman kashitage. Matsayin da ya dace na zurfin daidaitawar AM shine 0% zuwa 120%, kuma tsoho shine 100%. Lokacin da aka saita zurfin daidaitawa zuwa 0%, akai-akai amplitude (rabin igiyar jigilar kaya amplitude wanda aka saita) yana fitowa. Fitowa amplitude yana canzawa yayin da yanayin motsin motsi ya canza lokacin da aka saita zurfin daidaitawa zuwa 100%. Kayan aikin yana fitar da mafi girma-kololuwatage kasa da ± 5V (an haɗa shi da tashar 50Ω) lokacin da zurfin daidaitawa ya wuce 100%. Idan ana buƙatar canzawa, danna Parameter→Modulation Depth in amplitude aiki dubawa. Lokacin da tushen daidaitawa na waje, fitarwa ampAna sarrafa litude na kayan aikin ta hanyar ± 5V matakin sigina na tashar shigar da na'ura ta waje (Input/CNT probe) a ɓangaren baya. Don misaliample, idan ƙimar zurfin daidaitawa a cikin jerin siga an saita zuwa 100%, fitowar AM amplitude shine matsakaicin lokacin da siginar daidaitawa ta waje ta kasance +5V, fitowar AM amplitude shine mafi ƙarancin lokacin da siginar daidaitawa ta waje ta kasance -5V.
Comprehensive Example
Da farko, sanya kayan aiki a ciki ampYanayin daidaitawa (AM), sannan saita igiyoyin sine tare da 200Hz daga cikin kayan aikin azaman siginar daidaitawa da raƙuman murabba'i tare da mitar 10kHz, amplitta ta
200mVpp da aikin sake zagayowar 45% azaman siginar motsi mai ɗaukar nauyi. A ƙarshe, saita zurfin daidaitawa zuwa 80%. Ana ganin takamaiman matakai kamar haka:
- Kunna AmpAyyukan Modulation na litude (AM).
Latsa Menu→Modulation→Type→Amplitude Modulation bi da bi.
- Saita Siginar Siginar Modulation
Bayan kunna aikin AM, danna Parametersoftkey kuma mai dubawa zai bayyana kamar haka:
Danna softkey mai dacewa, sannan shigar da ƙimar lambobi da ake buƙata, sannan zaɓi naúrar.
- Saita Siginar Siginar Mai ɗauka
Latsa madaidaicin Wave mai ɗaukar kaya → Nau'i → Wave Square bi da bi don zaɓar raƙuman murabba'i azaman siginar kalaman mai ɗauka.
Latsa Parametersoftkey kuma, kuma abin dubawa zai tashi kamar haka:
Danna softkey mai dacewa, sannan shigar da ƙimar lambobi da ake buƙata, sannan zaɓi naúrar.
- Saita Zurfin Modulation
Bayan saita ma'aunin kalaman mai ɗaukar kaya, danna Returnsoftkey zuwa baya zuwa mai dubawa mai zuwa don saita zurfin daidaitawa.
Latsa Parameter →Modulation Degreesoftkey sake, sannan shigar da lamba 80 kuma danna % softkey tare da madannai lamba don saita zurfin daidaitawa.
4.1.2 Modulation Frequency (FM)
A cikin gyare-gyaren mitar, ƙirar igiyar igiyar ruwa yawanci tana kunshe da igiyar ɗaukar nauyi da sifar daidaitawa. Mitar kalaman mai ɗauka zai canza kamar yadda amplitude na modulation siffar canje-canje.
Latsa Menu→Modulation→Nau'i→ Modulation Modulation bi da bi don fara aikin FM. Na'urar za ta fitar da tsarin igiyar ruwa mai gyare-gyare tare da tsarin motsin motsi da saitin igiyoyin jigilar kaya a halin yanzu. 
Zaɓin Wave Waveform mai ɗauka
Siffar igiyoyin jigilar jigilar FM na iya zama: igiyar ruwa, igiyar murabba'i, ramp igiyar ruwa, bugun bugun jini, igiyar ruwa ta sabani (sai dai DC) da hayaniya (tsoho shine sine wave). Bayan zaɓin daidaitawar FM, danna maɓalli mai taushin maɓalli na Wave Parameter don shigar da ƙirar zaɓen mai ɗaukar hoto. 
Saitin Mitar Wave Mai ɗauka
Matsakaicin mitar kalaman mai ɗaukar nauyi ya bambanta da nau'in igiyar motsi daban-daban. Tsohuwar mitar duk igiyoyin jigilar kaya shine 1kHz. Ana iya ganin kewayon saitin mitar kowane igiyar jigilar kaya a cikin tebur mai zuwa:
| Wave mai ɗaukar nauyi | Yawanci | |||||
| Saukewa: UTG1020A | Saukewa: UTG1010A | Saukewa: UTG1005A | ||||
| Mafi ƙarancin ƙima | Matsakaicin Daraja | Mafi ƙarancin ƙima | Matsakaicin Daraja | Mafi ƙarancin ƙima | Matsakaicin Daraja | |
| Sine Wave | 1pHz | 10MHz | liiHz | 10MHz | liiHz | 5MHz |
| Ƙwallon ƙafa | 1pHz | 5MHz | liiHz | 5MHz | 1pHz | 5MHz |
| Ramp Wave | 1pHz | 400kHz | liiHz | 400kHz | 1pHz | 400 kz |
| Wave na sabani | 1pHz | 3MHz | liiHz | 2MHz | 1pHz | 1MHz |
Latsa Siga →Frequencysoftkey bi da bi don saita mitar kalaman mai ɗauka, sannan shigar da ƙimar lamba da ake buƙata, sannan zaɓi naúrar.
Zaɓin Tushen Modulation
Wannan na'urar na iya zaɓar tushen canji na ciki ko tushen daidaitawa na waje. Bayan kunna aikin FM, tsohowar tushen daidaitawa na ciki. Idan ana buƙatar canzawa, danna 
- Tushen Ciki
Lokacin da tushen gyare-gyare ya kasance na ciki, kalaman daidaitawa na iya zama: igiyar ruwa, kalaman murabba'i, tashi ramp kalaman, fadowa ramp kalaman ruwa, kalaman sabani da hayaniya. Bayan kunna aikin FM, tsohowar kalaman daidaitawa shine sine. Idan ana buƙata don canjawa, latsa Wave mai ɗaukar kaya →Parameter→Buga bi da bi.
Square kalaman: aikin sake zagayowar shine 50%
Jagora Ramp Wave: darajar simmetry shine 100%
Taurari Ramp Wave: darajar simmetry shine 0%
Arbitrary Wave: Matsakaicin tsayin igiyar igiyar ruwa shine 1kpts
Surutu: Farin Hayaniyar Gauss - Source na waje
Lokacin da tushen gyare-gyare ya kasance waje, za a canza fasalin igiyar jigilar kaya ta hanyar igiyar ruwa ta waje. Ana sarrafa karkatar da mitar FM ta hanyar ± 5V matakin siginar siginar tashar shigar da canji ta waje akan ɓangaren gaba. A cikin ingantaccen matakin sigina, mitar fitarwa ta FM ya fi mitar kalaman mai ɗaukar kaya, yayin da a matakin sigina mara kyau, mitar fitowar FM ƙasa da mitar kalaman mai ɗauka. Ƙananan matakin siginar waje yana da ƙananan karkata. Domin misaliampHar ila yau, idan an saita saitin mitar zuwa 1kHz kuma siginar daidaitawa ta waje ta kasance +5V, mitar fitarwa ta FM zata zama mitar mai ɗauka na yanzu tare da 1kHz. Lokacin da siginar daidaitawa ta waje ta kasance -5V, mitar fitarwa na FM zai zama mitar mai ɗauka na yanzu a debe 1kHz.
Saitin Mitar Siffar Modulation
Lokacin da tushen gyare-gyare ya kasance na ciki, ana iya daidaita mitar sifar daidaitawa. Bayan kunna aikin FM, tsohowar mitar nau'in daidaitawa shine 100Hz. Idan ana buƙatar canzawa, danna madaidaicin Wave Wave → Modulation Mitar bi da bi, kuma kewayon mitar daidaitawa shine 2mHz zuwa 50kHz. Lokacin da tushen gyare-gyare ya kasance na waje, lissafin sigina zai ɓoye zaɓin sifar daidaitawa da zaɓin daidaitawa, kuma za'a canza tsarin kalaman mai ɗaukar hoto ta hanyar motsi na waje. Matsakaicin shigar da siginar daidaitawa daga waje shine 0Hz zuwa 20Hz.
Saitin Juya Mita
Matsakaicin mitoci yana wakiltar bambanci tsakanin mitar tsarin raƙuman motsin FM da mitar mai ɗauka. Tsayayyen kewayon juzu'in mitar FM daga 1μHz zuwa matsakaicin mitar kalaman mai ɗauka na yanzu, kuma ƙimar tsoho ita ce 1kHz. Idan ana buƙatar canzawa, danna Sigina → Juyawa juzu'i bi da bi.
- Matsakaicin mitar ya yi ƙasa da mitar kalaman mai ɗauka. Idan an saita ƙimar karkatacciyar mitar sama fiye da mitar kalaman mai ɗaukar kaya, na'urar za ta saita ƙimar ta atomatik zuwa matsakaicin mitar mai ɗaukar nauyi.
- Jimlar karkatar da mitar da mitar kalaman mai ɗaukar nauyi ya yi ƙasa da mafi girman mitar da aka yarda da ita. Idan an saita ƙimar karkatacciyar mitar zuwa ƙima mara inganci, na'urar za ta saita ƙimar ta atomatik zuwa matsakaicin mitar mai ɗaukar nauyi.
Comprehensive Exampda:
Sanya kayan aiki suyi aiki a yanayin daidaita mitar (FM), sannan saita sine wave tare da 2kHz daga cikin kayan aikin azaman siginar daidaitawa da raƙuman murabba'i tare da mitar 10kHz kuma amplitude na 100mVpp azaman siginar kalaman mai ɗauka. A ƙarshe, saita karkatar da mitar zuwa 5kHz. Ana ganin takamaiman matakai kamar haka:
- Kunna Ayyukan Motsi (FM).
Latsa Menu→Modulation→Nau'i→Modulator na mitar juzu'i don fara aikin FM.
- Saita Siginar Siginar Modulation
Danna Parametersoftkey. Sa'an nan dubawa zai nuna kamar haka:
Danna softkey mai dacewa, sannan shigar da ƙimar lambobi da ake buƙata, sannan zaɓi naúrar.
- Saita Siginar Siginar Mai ɗauka
Latsa madaidaicin Wave mai ɗaukar kaya → Nau'i →Sine Wave bi da bi don zaɓar igiyar igiyar ruwa azaman siginar kalaman mai ɗauka.
Latsa Parametersoftkey, kuma abin dubawa zai tashi kamar haka:
Danna softkey mai dacewa da farko, sannan shigar da ƙimar lamba da ake buƙata, sannan zaɓi naúrar.
- Saita Sauƙaƙe Mita
Bayan saita ma'aunin kalaman mai ɗaukar kaya, danna Returnsoftkey zuwa baya zuwa mai dubawa mai zuwa don saita karkacewar mitar.
Latsa Parameter →Maɓallin Maɓalli na Mitar, sannan shigar da lamba 5 kuma danna kHzsoftkey tare da madannai na lamba don saita karkacewar mitar.
- Kunna Fitar tashoshi
Danna maɓallin tashar don buɗe fitarwa ta tashar.
Siffar sifar motsin motsin FM da aka duba ta hanyar oscilloscope ana nunawa kamar haka:
4.1.3 Canjin Lokaci (PM)
A cikin juzu'in juzu'i, yanayin ƙawancen motsi yawanci ya ƙunshi igiyar ɗaukar nauyi da motsin motsi. Matsayin igiyar jigilar kaya zai canza kamar yadda amplitude na modulation siffar canje-canje.
Latsa Menu→Modulation→Type→ Modulation Phase bi da bi don fara aikin PM. Na'urar za ta fitar da tsarin igiyar ruwa mai gyare-gyare tare da tsarin motsin motsi da saitin igiyoyin jigilar kaya a halin yanzu. 
Zaɓin Wave Waveform mai ɗauka
Tsarin igiyar motsi na PM na iya zama: igiyar ruwa, igiyar murabba'i, ramp igiyar ruwa ko igiyar ruwa ta sabani (sai dai DC), kuma tsoho shine igiyar ruwa. Latsa madaidaicin maɓalli mai ɗaukar nauyi don zaɓar nau'in igiyar motsi. 
Saitin Mitar Wave Mai ɗauka
Matsakaicin mitar kalaman mai ɗaukar nauyi ya bambanta da nau'in igiyar motsi daban-daban. Tsohuwar mitar duk igiyoyin jigilar kaya shine 1kHz. Ana iya ganin kewayon saitin mitar kowane igiyar jigilar kaya a cikin tebur mai zuwa:
| Wave mai ɗaukar nauyi | Yawanci | |||||
| Saukewa: UTG1020A | Saukewa: UTG1010A | Saukewa: UTG1005A | ||||
| Mafi ƙarancin ƙima | Matsakaicin Daraja | Mafi ƙarancin ƙima | Matsakaicin Daraja | Mafi ƙarancin ƙima | Matsakaicin Daraja | |
| Sine Wave | 1pHz | 10MHz | 1pHz | 10MHz | 1pHz | 5MHz |
| Ƙwallon ƙafa | 1pHz | 5MHz | 1pHz | 5MHz | 1pHz | 5MHz |
| Ramp Wave | 1pHz | 400kHz | 1pHz | 400kHz | 1pHz | 400 kz |
Latsa Siga → Frequencysoftkey don shigar da saitin mitar kalaman mai ɗauka, sannan shigar da ƙimar lambobi da ake buƙata, kuma zaɓi naúrar.
Zaɓin Tushen Modulation
Wannan na'urar na iya zaɓar tushen canji na ciki ko tushen daidaitawa na waje. Bayan kunna aikin PM, tsoho na tushen daidaitawa yana ciki. Idan ana buƙatar canzawa, danna Parameter → ModulationSource → Na waje bi da bi.
- Tushen Ciki
Lokacin da tushen gyare-gyare ya kasance na ciki, siffar daidaitawa na iya zama: igiyar ruwa, kalaman murabba'i, tashi ramp kalaman, fadowa ramp kalaman ruwa, kalaman sabani da hayaniya. Bayan kunna aikin PM, tsohowar kalaman daidaitawa shine sine wave. Idan ana buƙatar canzawa, danna madaidaicin Wave Mai ɗauka →Buga bi da bi. - Source na waje
Lokacin da tushen gyare-gyare ya kasance waje, za a canza fasalin igiyar jigilar kaya ta hanyar igiyar ruwa ta waje. Ana sarrafa karkatar da lokaci ta PM ta ± 5V matakin siginar siginar tashar shigar da gyare-gyaren waje a gaban panel. Domin misaliample, idan darajar karkacewar lokaci a lissafin sigina an saita zuwa 180º, +5V na siginar daidaitawa na waje yayi daidai da sauyin lokaci 180º.
Saitin Mitar Siffar Modulation
Lokacin da tushen gyare-gyare ya kasance na ciki, ana iya daidaita mitar sifar daidaitawa. Bayan kunna aikin PM, tsoho na mitar sifar daidaitawa shine 100Hz. Idan ana buƙatar canzawa, danna madaidaicin Wave Wave →Modulation Frequency bi da bi, kuma mitar daidaitawa shine 2mHz zuwa 50kHz. Lokacin da tushen gyare-gyare ya kasance waje, za a canza fasalin igiyar jigilar kaya ta hanyar igiyar ruwa ta waje. Matsakaicin shigar da siginar daidaitawa daga waje shine 0Hz zuwa 20Hz.
Sabanin lokaci yana nuna canji tsakanin yanayin yanayin raƙuman raƙuman raƙuman raƙuman ruwa na PM da lokacin lokacin raƙuman ruwa mai ɗauka. Matsakaicin kewayon karkacewar lokaci na PM daga 0º zuwa 360º, kuma ƙimar tsoho shine 50º. Idan ana buƙatar canzawa, latsa Siga →Baɓawar lokaci bi da bi.
Comprehensive Example
Da fari dai, sanya kayan aikin aiki a yanayin daidaita yanayin lokaci (PM), sannan saita sine wave tare da 200Hz daga cikin kayan aikin azaman siginar daidaitawa da murabba'i tare da mitar 900Hz kuma amplitude na 100mVpp azaman siginar kalaman mai ɗauka. A ƙarshe, saita karkatar lokaci zuwa 200º. Ana ganin takamaiman matakai kamar haka:
- Kunna Ayyukan Canjin Mataki (PM).
Latsa Menu→Modulation→Type→Modulation na lokaci don fara aikin PM.
- Saita Siginar Siginar Modulation
Latsa Parametersoftkey kuma abin dubawa zai nuna kamar haka:
Danna softkey mai dacewa da farko, sannan shigar da ƙimar lamba da ake buƙata, sannan zaɓi naúrar.
- Saita Siginar Siginar Mai ɗauka
Latsa madaidaicin Wave mai ɗaukar kaya → Nau'i →Sine Wave bi da bi don zaɓar igiyar igiyar ruwa azaman siginar kalaman mai ɗauka.
Latsa Parametersoftkey, kuma abin dubawa zai tashi kamar haka:
Danna softkey mai dacewa, sannan shigar da ƙimar lambobi da ake buƙata, sannan zaɓi naúrar.
- Saita Juyin Hali
Latsa Returnsoftkey don komawa zuwa mai dubawa mai zuwa don saita tsarin daidaitawa.
Latsa Parameter →Maɓallin Keɓancewar lokaci, sannan shigar da lamba 200 kuma danna ºsoftkey tare da madannai na lamba don saita karkacewar lokaci.
- Kunna Fitar tashoshi
Danna maɓallin tashar don buɗe fitarwa ta tashar da sauri.
Siffar raƙuman motsi na PM da aka duba ta hanyar oscilloscope ana nunawa kamar haka:
4.1.4 AmpLitude Shift Keying (ASK)
ASK yana wakiltar siginar dijital "0" da "1" ta hanyar canzawa amplitude na jigilar siginar motsi. Siginar kalaman mai ɗaukar nauyi tare da daban-daban ampZa a fitar da litude bisa la'akari daban-daban na siginar daidaitawa.
TAMBAYA Zaɓin Modulation
Latsa Menu→Modulation→Type→AmpMaɓallin Shift na litude bi da bi don fara aikin ASK, na'urar za ta fitar da tsarin igiyar ruwa mai daidaitawa tare da ƙimar ASK da saita igiyar ɗaukar kaya a halin yanzu.
Zaɓin Wave Waveform mai ɗauka
TAMBAYA tsarin igiyar motsi na iya zama: Sine wave, square, ramp igiyar ruwa ko igiyar ruwa ta sabani (sai dai DC), kuma tsoho shine igiyar ruwa. Latsa maɓalli mai taushin maɓalli na Wave don shigar da ƙirar zaɓen mai ɗaukar hoto. 
Saitin Mitar Wave Mai ɗauka
Matsakaicin mitar kalaman mai ɗaukar nauyi ya bambanta da nau'in igiyar motsi daban-daban. Tsohuwar mitar duk igiyoyin jigilar kaya shine 1kHz. Ana iya ganin kewayon saitin mitar kowane igiyar jigilar kaya a cikin tebur mai zuwa:
| Wave mai ɗaukar nauyi |
Yawanci |
|||||
| Saukewa: UTG1020A | Saukewa: UTG1010A | Saukewa: UTG1005A | ||||
| Mafi ƙarancin ƙima | Matsakaicin Daraja | Mafi ƙarancin ƙima | Matsakaicin Daraja | Mafi ƙarancin ƙima | Matsakaicin Daraja | |
| Sine Wave | liiHz | 10MHz | liiHz | 10MHz | liiHz | 5MHz |
| Ƙwallon ƙafa | 1pHz | 5MHz | liiHz | 5MHz | liiHz | 5MHz |
| Ramp Wave | 1pHz | 400kHz | liiHz | 400kHz | liiHz | 400 kz |
| Wave na sabani | 1pHz | 3MHz | liiHz | 2MHz | liiHz | 1MHz |
Latsa Parameter→Frequencysoftkey, sannan shigar da ƙimar lambar da ake buƙata, kuma zaɓi naúrar.
Zaɓin Tushen Modulation
Na'urar zata iya zaɓar tushen canji na ciki ko tushen daidaitawa na waje. Bayan kunna aikin ASK, tsoho na tushen daidaitawa yana ciki. Idan ana buƙatar canzawa, danna Parameter → ModulationSource → Na waje bi da bi.
- Tushen Ciki
Lokacin da tushen daidaitawa ya kasance na ciki, kalaman daidaitawa na ciki shine murabba'in zagaye na 50% (ba a daidaita shi ba).
Ana iya saita ƙimar ASK don keɓance tsarin igiyar ruwa ampmitar hopping litude. - Source na waje
Lokacin da tushen gyare-gyare ya kasance waje, za a canza fasalin igiyar jigilar kaya ta hanyar igiyar ruwa ta waje. TAMBAYA fitarwa ampAn ƙaddara litude ta hanyar ma'auni na ƙirar ƙirar ƙira a gaban panel. Domin misaliample, fitar da kalaman mai ɗauka ampyanayin saitin yanzu lokacin da dabarar shigarwar waje ta yi ƙasa, da igiyar ɗaukar kaya amplitude kasa da ampyanayin saitin yanzu lokacin da dabarar shigarwar waje ta yi girma. - TAMBAYA Saitin Ƙididdiga
Lokacin da tushen daidaitawa ke ciki, mitar TAMBAYA ampZa a iya daidaita tsalle tsalle. Bayan kunna aikin ASK, ana iya saita ƙimar ASK kuma kewayon saiti shine 2mHz zuwa 100kHz, ƙimar tsoho shine 1kHz. Idan ana buƙatar canzawa, latsa Sigar Wave Mai ɗauka →Rate bi da bi.
Comprehensive Example
Sanya kayan aiki a ciki ampYanayin maɓalli na canza litude (ASK), sannan saita siginar dabaru tare da 300Hz daga ciki na kayan aiki azaman siginar daidaitawa da igiyoyin sine tare da mitar 15kHz da amplitude na 2Vpp azaman siginar kalaman mai ɗauka. Ana ganin takamaiman matakai kamar haka:
- Kunna AmpAyyukan Shift Keying (ASK).
Latsa Menu→Modulation→Type→Amplitude Shift Keying bi da bi don fara aikin TAMBAYA.
- Saita Siginar Siginar Mai ɗauka
Latsa Sigar Wave mai ɗaukar kaya → Nau'in →Sine Wave bi da bi
Latsa Parametersoftkey, kuma abin dubawa zai tashi kamar haka:
Danna softkey mai dacewa, sannan shigar da ƙimar lambobi da ake buƙata, sannan zaɓi naúrar.
- Saita ƙimar TAMBAYA
Bayan saita ma'aunin kalaman mai ɗaukar kaya, danna Returnsoftkey don komawa zuwa mahaɗin da ke biyowa don saita lokaci daidaitacce.
Latsa Parameter →Ratesoftkey sake, sannan shigar da lamba 300 kuma latsa Hzsoftkey tare da madannai na lamba don saita ƙimar TAMBAYA.
- Kunna Fitar tashoshi
Danna maɓallin tashar don buɗe fitarwa ta tashar da sauri.
Siffar ASK modulation waveform da aka duba ta oscilloscope ana nunawa kamar haka:
4.1.5 Maɓallin Canjin Mita (FSK)
A cikin maɓallin motsi na mitar, ana iya canza ƙimar mitar kalaman mai ɗauka da mitar hopping.
Zaɓin Modulation FSK
Latsa Menu → Modulation → Nau'in → Maimaita Shift Maɓalli don fara aikin FSK. Na'urar za ta fitar da sigar motsi mai daidaitawa tare da saitin yanzu.
Zaɓin Wave Waveform mai ɗauka
Latsa madaidaicin maɓalli mai ɗaukar nauyi don shigar da ƙirar zaɓen mai ɗaukar hoto. FSK mai ɗaukar igiyar igiyar ruwa na iya zama: igiyar ruwa, igiyar murabba'i, ramp igiyar ruwa ko igiyar ruwa ta sabani (sai dai DC), kuma tsoho shine igiyar ruwa. 
Saitin Mitar Wave Mai ɗauka
Matsakaicin mitar kalaman mai ɗaukar nauyi ya bambanta da nau'in igiyar motsi daban-daban. Tsohuwar mitar duk igiyoyin jigilar kaya shine 1kHz. Ana iya ganin kewayon saitin mitar kowane igiyar jigilar kaya a cikin tebur mai zuwa:
| Wave mai ɗaukar nauyi | Yawanci | |||||
| Saukewa: UTG1020A | Saukewa: UTG1010A | Saukewa: UTG1005A | ||||
| Mafi ƙarancin ƙima | Matsakaicin Daraja | Mafi ƙarancin ƙima | Matsakaicin Daraja | Mafi ƙarancin Daraja |
Matsakaicin Daraja |
|
| Sine Wave | 1pHz | 10MHz | liiHz | 10MHz | 1pHz | 5MHz |
| Ƙwallon ƙafa | 1pHz | 5MHz | liiHz | 5MHz | liiHz | 5MHz |
| Ramp Wave | 1pHz | 400kHz | liiHz | 400kHz | liiHz | 400 kz |
| Wave na sabani | 1pHz | 3MHz | liiHz | 2MHz | liiHz | 1MHz |
Latsa Parameter→Frequencysoftkey, sannan shigar da ƙimar lamba da ake buƙata, kuma zaɓi naúrar.
Zaɓin Tushen Modulation
Na'urar zata iya zaɓar tushen canji na ciki ko tushen daidaitawa na waje. Bayan kunna aikin FSK, tsoho na tushen daidaitawa yana ciki. Idan ana buƙatar canzawa, danna Parameter → ModulationSource → Na waje bi da bi.
- Tushen Ciki
Lokacin da tushen daidaitawa ya kasance na ciki, kalaman daidaitawa na ciki shine murabba'in 50% na sake zagayowar aiki (ba daidaitacce ba). Ana iya saita ƙimar FSK don keɓance mitar motsi tsakanin mitar kalaman mai ɗauka da mitar hop. - Source na waje
Lokacin da tushen gyare-gyare ya kasance waje, za a canza fasalin igiyar jigilar kaya ta hanyar igiyar ruwa ta waje. Mitar fitarwa ta FSK ana ƙididdige shi ne ta hanyar madaidaicin matakin ƙirar ƙirar ƙira a gaban panel. Don misaliample, fitar da mitar mai ɗauka lokacin da dabarar fitarwa ta waje ta yi ƙasa, da kuma fitar da mitar hop lokacin da dabarar shigarwar waje ta yi girma.
Saitin Mitar Hop
Bayan kunna aikin FSK, tsoho na mitar hop shine 2MHz. Idan ana buƙatar canzawa, danna Parameter→Hop Frequency bi da bi. Tsayayyen kewayon mitar hop ana ƙaddara ta hanyar igiyar igiyar ruwa mai ɗauka. Dubi tebur mai zuwa don saita kewayon kowane mitar kalaman mai ɗauka:
| Wave mai ɗaukar nauyi | Yawanci | |||||
| Saukewa: UTG1020A | Saukewa: UTG1010A | Saukewa: UTG1005A | ||||
| Mafi ƙarancin ƙima | Matsakaicin Daraja | Mafi ƙarancin ƙima | Matsakaicin Daraja | Mafi ƙarancin Daraja |
Matsakaicin Daraja |
|
| Sine Wave | 1pHz | 10MHz | 1pHz | 10MHz | 1pHz | 5MHz |
| Ƙwallon ƙafa | 1pHz | 5MHz | 1pHz | 5MHz | 1pHz | 5MHz |
| Ramp Wave | 1pHz | 400kHz | 1pHz | 400kHz | 1pHz | 400 kz |
| Wave na sabani | 1pHz | 3MHz | 1pHz | 2MHz | 1pHz | 1MHz |
Saitin Ƙimar FSK
Lokacin da tushen daidaitawa ya kasance na ciki, za'a iya saita mitar motsi tsakanin mitar kalaman mai ɗaukar kaya da mitar hop. Bayan kunna aikin FSK, ana iya saita ƙimar FSK kuma kewayon saiti shine 2mHz zuwa 100kHz, ƙimar tsoho shine 1kHz. Idan ana buƙatar canzawa, danna madaidaicin Wave → Rate bi da bi.
Comprehensive Example
Da fari dai, sanya kayan aikin ya yi aiki cikin yanayin maɓalli na mitar (FSK), sannan saita igiyar igiyar ruwa tare da 2kHz da 1Vpp daga cikin kayan aikin azaman siginar kalaman mai ɗaukar kaya, sannan saita mitar hop zuwa 800 Hz, a ƙarshe, sanya mitar mai ɗaukar hoto. kuma mitar hop tana motsawa tsakanin juna tare da mitar 200Hz. Ana ganin takamaiman matakai kamar haka:
- Kunna Ayyukan Maɓallin Maɓallin Mita (FSK).
Latsa Menu→Modulation→Nau'i→Maɓallin Maɓallin Sauyawa don fara aikin FSK.
- Saita Siginar Siginar Mai ɗauka
Latsa madaidaicin Wave mai ɗaukar kaya → Nau'i →Sine Wave bi da bi don zaɓar igiyar ruwa azaman igiyar ɗaukar kaya.
Latsa Parametersoftkey kuma, kuma abin dubawa zai tashi kamar haka:
Danna softkey mai dacewa da farko, sannan shigar da ƙimar lamba da ake buƙata, sannan zaɓi naúrar.
- Saita Frequency Hop da ƙimar FSK
Latsa Returnsoftkey don komawa zuwa dubawa mai zuwa.
Latsa Parametersoftkey kuma, kuma abin dubawa zai tashi kamar haka:
Danna softkey mai dacewa da farko, sannan shigar da ƙimar lamba da ake buƙata, sannan zaɓi naúrar.
- Kunna Fitar tashoshi
Latsa maɓallin tashar a gaban panel don buɗe fitarwa ta tashar.
Siffar FSK Modulation waveform da aka duba ta hanyar oscilloscope ana nunawa kamar haka:
4.1.6 Keying Shift Keying (PSK)
A cikin maɓallin kewayawa lokaci, ana iya saita janareta na aikin DDS don matsawa tsakanin saiti guda biyu (lokacin jigilar jigilar kaya da lokacin daidaitawa). Fitar lokacin siginar motsi mai ɗaukar nauyi ko lokacin siginar hop bisa la'akari da siginar daidaitawa.
Zaɓin Modulation PSK
Latsa Menu → Modulation → Nau'in → Maɓallin Shift na lokaci don fara aikin PSK. Na'urar za ta fitar da tsarin igiyar ruwa mai daidaitawa tare da lokacin motsi mai ɗaukar hoto (tsoho shine 0º kuma ba daidaitacce ba) na saitin yanzu da lokacin daidaitawa.
Zaɓin Wave Waveform mai ɗauka
Sine mai ɗaukar hoto na PSK na iya zama: Sine wave, square, ramp igiyar ruwa ko igiyar ruwa ta sabani (sai dai DC), kuma tsoho shine igiyar ruwa. Latsa madaidaicin maɓalli mai ɗaukar nauyi don shigar da ƙirar zaɓen mai ɗaukar hoto. 
Saitin Mitar Wave Mai ɗauka
Matsakaicin mitar kalaman mai ɗaukar nauyi ya bambanta da nau'in igiyar motsi daban-daban. Tsohuwar mitar duk igiyoyin jigilar kaya shine 1kHz. Ana iya ganin kewayon saitin mitar kowane igiyar jigilar kaya a cikin tebur mai zuwa:
| Wave mai ɗaukar nauyi | Yawanci | |||||
| Saukewa: UTG1020A | Saukewa: UTG1010A | Saukewa: UTG1005A | ||||
| Mafi ƙarancin ƙima | Matsakaicin Daraja | Mafi ƙarancin ƙima | Matsakaicin Daraja | Mafi ƙarancin Daraja |
Matsakaicin Daraja |
|
| Sine Wave | 1pHz | 10MHz | 1pHz | 10MHz | 1pHz | 5MHz |
| Ƙwallon ƙafa | 1pHz | 5MHz | 1pHz | 5MHz | 1pHz | 5MHz |
| Ramp Wave | 1pHz | 400kHz | 1pHz | 400kHz | 1pHz | 400 kz |
Latsa Parameter→Frequencysoftkey, sannan shigar da ƙimar lamba da ake buƙata, kuma zaɓi naúrar.
Zaɓin Tushen Modulation
UTG1000A aikin / janareta na raƙuman ruwa na sabani na iya zaɓar tushen daidaitawa na ciki ko tushen daidaitawa na waje. Bayan kunna aikin PSK, tsoho na tushen daidaitawa yana ciki. Idan ana buƙatar canzawa, danna Parameter → Modulation → Source → External bi da bi.
- Tushen Ciki
Lokacin da tushen daidaitawa ya kasance na ciki, kalaman daidaitawa na ciki shine murabba'in zagaye na 50% (ba a daidaita shi ba).
Ana iya saita ƙimar PSK don keɓance mitar motsi tsakanin lokacin igiyar jigilar kaya da lokacin daidaitawa. - Source na waje
Lokacin da tushen gyare-gyare ya kasance waje, za a canza fasalin igiyar jigilar kaya ta hanyar igiyar ruwa ta waje. Lokacin raƙuman motsi mai ɗaukar kaya zai fito lokacin da dabarar shigarwar waje ta yi ƙasa, kuma lokacin daidaitawa zai fito lokacin da dabarar shigarwar waje ta yi girma.
Saitin Ƙimar PSK
Lokacin da tushen daidaitawa ya kasance na ciki, za'a iya saita mitar motsi tsakanin lokacin igiyar jigilar kaya da lokacin daidaitawa. Bayan kunna aikin PSK, ana iya saita ƙimar PSK kuma kewayon saiti shine 2mHz zuwa 100kHz, ƙimar tsoho shine 100Hz. Idan ana buƙatar canzawa, danna madaidaicin Wave → Rate bi da bi.
Saitin Matakin daidaitawa
Lokacin daidaitawa yana nuna canji tsakanin yanayin yanayin motsi na PSK da aka canza da kuma lokacin lokacin motsi mai ɗaukar kaya. Tsayayyen kewayon lokaci na PSK yana daga 0º zuwa 360º, kuma ƙimar tsoho shine 0º. Idan ana buƙatar canzawa, danna Parameter → Mataki bi da bi.
Comprehensive Example
Sanya kayan aikin ya yi aiki a yanayin maɓalli na canji na lokaci (PSK), sannan saita igiyar ruwa tare da 2kHz da 2Vpp daga cikin kayan aikin azaman siginar kalaman mai ɗaukar kaya, a ƙarshe, sanya lokacin igiyar jigilar kaya da lokacin daidaitawa tsakanin juna tare da mitar 1kHz. . Ana ganin takamaiman matakai kamar haka:
- Kunna Ayyukan Maɓallin Maɓalli na Mataki (PSK).
Latsa Menu → Modulation → Nau'in →Maɓallin Shift na lokaci don fara aikin PSK.
- Saita Siginar Siginar Mai ɗauka
Latsa madaidaicin Wave mai ɗaukar kaya → Nau'i →Sine Wave bi da bi don zaɓar igiyar igiyar ruwa azaman siginar kalaman mai ɗauka.
Latsa Parametersoftkey, kuma abin dubawa zai tashi kamar haka:
Danna softkey mai dacewa, sannan shigar da ƙimar lambobi da ake buƙata, sannan zaɓi naúrar.
- Saita Ƙimar PSK da Matsayin Modulation
Latsa Returnsoftkey don komawa zuwa mai dubawa mai zuwa:
Latsa Parametersoftkey, kuma abin dubawa zai tashi kamar haka:
Danna softkey mai dacewa, sannan shigar da ƙimar lambobi da ake buƙata, sannan zaɓi naúrar.
- Kunna Fitar tashoshi
Danna maɓallin tashar don buɗe fitarwa ta tashar da sauri.
Siffar ƙirar ƙirar ƙirar PSK da aka duba ta hanyar oscilloscope ana nunawa kamar haka:
4.1.7 Modulation na Nisa Pulse (PWM)
A cikin juzu'in juzu'in juzu'in juzu'i, ƙirar igiyar motsi yawanci tana ƙunshi nau'ikan igiyoyin jigilar kaya da nau'in daidaitawa, kuma faɗin bugun bugun bugun motsi zai canza azaman siffa ta daidaitawa. amplitude canje-canje.
Zaɓin Modulation PWM
Latsa Menu→Modulation →Nau'i → Tsarin Faɗin bugun bugun bugun jini bi da bi don fara aikin PWMK. Na'urar za ta fitar da tsarin igiyar ruwa mai daidaitawa tare da tsarin motsin motsi da igiyoyin jigilar kaya na saitin yanzu. 
Mai ɗaukar Wave Waveform
PWM mai ɗaukar igiyar igiyar ruwa zai iya zama bugun bugun jini kawai. Bayan daidaitawar PWM, danna maɓalli mai ɗaukar hoto don shigar da mahallin zaɓin igiyar igiyar ruwa, sannan ana iya ganin alamar Pulse Wave an zaɓi ta atomatik.
Saitin Mitar Wave Mai ɗauka
Saita kewayon mitar kalaman bugun jini daga 500uH zuwa 25MHz, kuma mitar tsoho shine 1kHz. Latsa Siga → Maɓalli mai laushi don canza mita, sannan shigar da ƙimar lamba da ake buƙata, kuma zaɓi naúrar.
Saitin Zagayowar Wave Mai ɗaukar kaya
Matsakaicin kewayon aikin sake zagayowar wave shine 0.01% ~ 99.99%, kuma tsohowar sake zagayowar aikin shine 50%. Latsa Siga → Maɓallin ƙira don canzawa, sannan shigar da ƙimar lambobi da ake buƙata, kuma zaɓi naúrar.
Zaɓin Tushen Modulation
Na'urar zata iya zaɓar tushen canji na ciki ko tushen daidaitawa na waje. Idan ana buƙatar canzawa, danna Parameter → ModulationSource → Na waje bi da bi.
- Tushen Ciki
Lokacin da tushen gyare-gyare ya kasance na ciki, kalaman daidaitawa na iya zama: igiyar ruwa, kalaman murabba'i, tashi ramp kalaman, fadowa ramp igiyar ruwa, igiyar ruwa ta sabani da hayaniya, kuma igiyar tsohuwa ita ce igiyar ruwa. Idan ana buƙatar canzawa, danna madaidaicin Wave Mai ɗaukar nauyiModulation Waveform bi da bi.
Square kalaman: Zagayen aiki 50%
Jagora Ramp Wave: darajar simmetry shine 100%
Taurari Ramp Wave: darajar simmetry shine 0%
Arbitrary Wave: Matsakaicin tsayin igiyar igiyar ruwa shine 1kpts
Surutu: Farin Hayaniyar Gauss - Source na waje
Lokacin da tushen gyare-gyare ya kasance waje, za a canza tsarin igiyar motsi mai ɗaukar hoto ta hanyar motsi na waje.
Saitin Mitar Siffar Modulation
Lokacin da tushen gyare-gyare ya kasance na ciki, ana iya daidaita yawan mitar kalaman daidaitawa (tsawo shine 2mHz ~ 20kHz). Bayan kunna aikin PWM, tsoho na mitar kalaman daidaitawa shine 1kHz. Idan ana buƙatar canzawa, danna madaidaicin Wave Mai ɗaukar hoto →Madaidaicin daidaitawa bi da bi. Lokacin da tushen gyare-gyare ya kasance waje, za'a canza nau'in igiyar motsi mai ɗaukar nauyi (wavewar bugun jini) ta hanyar siginar motsi na waje. Kewayon shigar da siginar daidaitawa daga waje shine 0Hz zuwa 20kHz.
Saitin Keɓancewar Zagayowar Layi
Sabanin sake zagayowar aiki yana wakiltar bambanci tsakanin zagayowar aiki na tsarin raƙuman ruwa da aka canza da kuma sake zagayowar aikin mai ɗauka na yanzu. Matsakaicin kewayon sake zagayowar aikin PWM daga 0% zuwa 49.99%, kuma ƙimar tsoho shine 20%. Idan ana buƙatar canzawa, danna Siga →Saɓan Zagaye na Ayyuka bi da bi.
- Bambancin sake zagayowar aiki yana wakiltar bambanci tsakanin zagayowar aiki na tsarin raƙuman ruwa da aka canza da kuma zagayowar aiki na ainihin bugun bugun jini, wakilta a cikin %.
- Sabanin sake zagayowar aiki ba zai iya wuce aikin sake zagayowar bugun bugun jini na yanzu ba.
- Jimlar juzu'i na sake zagayowar aiki da zagayowar aikin bugu na yanzu dole ba zai wuce 99.99%.
- An iyakance karkatar da sake zagayowar aiki ta mafi ƙarancin aikin aikin bugun bugun jini da lokacin gefen yanzu.
Comprehensive Example
Sanya kayan aikin aiki a yanayin yanayin bugun jini (PWM), sannan saita igiyar sine tare da 1kHz daga cikin kayan aikin azaman siginar daidaitawa da igiyar bugun jini tare da mitar 10kHz, 2Vpp amplitude da 50% na aikin sake zagayowar a matsayin siginar kalaman mai ɗaukar kaya, a ƙarshe, saita karkatar da zagayowar aiki zuwa 40%. Ana ganin takamaiman matakai kamar haka:
- Kunna Ayyukan Canjin Nisa (PWM).
Latsa Menu → Modulation → Nau'in → Tsarin Faɗin bugun bugun jini don fara aikin PWM.
- Saita Siginar Siginar Modulation
Latsa Parameter softkey kuma abin dubawa zai nuna kamar haka:
Danna softkey mai dacewa, sannan shigar da ƙimar lambobi da ake buƙata, sannan zaɓi naúrar.
- Saita Siginar Siginar Mai ɗauka
Latsa maɓalli mai taushin maɓalli na Wave don shigar da saitin saitin ma'aunin ɗaukar nauyi.
Latsa Parameter softkey, kuma abin dubawa zai tashi kamar haka:
Idan ana buƙatar saita sigogi, fara danna maɓallin softe mai dacewa, sannan shigar da ƙimar lambobi da ake buƙata, sannan zaɓi naúrar.
- Saita Keɓancewar Zagayowar Layi
Latsa Returnsoftkey don komawa zuwa mahaɗin mai zuwa don saitin karkatar da zagayowar aiki:
Bayan latsa Parameter→Dutycyclesoftkey, shigar da lamba 40 kuma danna %softkey tare da madannai na lamba don saita karkacewar sake zagayowar aiki.
- Kunna Fitar tashoshi
Danna maɓallin tashar don buɗe fitarwa ta tashar da sauri.
Siffar yanayin ƙaƙƙarfan motsi na PWM da aka duba ta hanyar oscilloscope ana nunawa kamar haka:
4.2 Zazzage Fitar Waveform
A cikin yanayin shara, ana fitar da mitoci ta hanyar layi ko logarithmic yayin ƙayyadadden lokacin sharewa. Madogararsa na iya zama na ciki, na waje ko faɗakarwa; da igiyar ruwa, igiyar murabba'i, ramp igiyar ruwa da igiyar ruwa ta sabani (sai dai DC) na iya sarrafa fitar da shara.
4.2.1 Zabin Zabin
- Kunna Ayyukan Shara
Danna maɓallin Menu da farko, sannan danna Sweepsoftkey don fara aikin sharewa. Na'urar za ta fitar da tsarin igiyar ruwa tare da saitin yanzu.
- Zabin Waveform
Latsa maɓalli mai ɗaukar hoto don zaɓar tsari mai share-tsalle, sa'an nan abin dubawa zai nuna kamar haka:
4.2.2 Fara Mita da Dakatar da Saitin Mita
Mitar farawa da mitar tasha sune mafi girman iyaka da ƙananan iyaka na sikanin mita. Danna Returnsoftkey don komawa don share dubawa. Latsa Parameter → Fara Frequency →Dakatar da maɓallai na yau da kullun, sannan shigar da lamba tare da maɓallin madannai na lamba kuma danna maɓallin softkey mai dacewa. 
- Idan mitar farawa ta yi ƙasa da mitar tasha, janareta na aikin DDS yana sharewa daga ƙananan mitar zuwa babban mitar.
- Idan mitar farawa ya fi mitar tasha, janareta na aikin DDS yana sharewa daga babban mitar zuwa ƙananan mitar.
- Idan mitar farawa yayi daidai da tsaida mita, janareta aikin DDS yana share ƙayyadaddun mitar fitarwa.
- Sigina mai daidaitawa na yanayin shara sigina ce da ke ƙasa daga farkon lokacin sharewa zuwa tsakiyar lokacin sharewa, kuma tana da girma daga tsakiyar lokacin sharewa zuwa ƙarshen lokacin sharewa.
Tsoffin mitar farawa shine 1kHz, kuma mitar tasha shine 2kHz. Daban-daban sharar igiyar igiyar ruwa tana da kewayon saiti daban-daban na kunna kunnawa da tsayawa mita, ana nuna kewayon mitar kowane igiyar sharewa a cikin tebur mai zuwa:
| Wave mai ɗaukar nauyi | Yawanci | |||||
| Saukewa: UTG1020A | Saukewa: UTG1010A | Saukewa: UTG1005A | ||||
| Mafi ƙarancin ƙima | Matsakaicin Daraja | Mafi ƙarancin ƙima | Matsakaicin Daraja | Mafi ƙarancin ƙima | Matsakaicin Daraja | |
| Sine Wave | 1pHz | 10MHz | liiHz | 10MHz | liiHz | 5MHz |
| Ƙwallon ƙafa | liiHz | 5MHz | liiHz | 5MHz | 1pHz | 5MHz |
| Ramp Wave | liiHz | 400kHz | liiHz | 400kHz | liiHz | 400 kz |
| Wave na sabani | 1pHz | 3MHz | liiHz | 2MHz | liiHz | 1MHz |
4.2.3 Yanayin Tsara
Sharar layin layi: janareta na waveform yana canza mitar fitarwa a cikin layin layi yayin sharewa; Sweep Logarithmic: janareta na waveform yana canza mitar fitarwa ta hanyar logarithmic; Sharar waje, tsoho shine hanyar share fage, idan ana buƙatar canzawa, da fatan za a danna TypeLogarithmsoftkey. 
4.2.4 Lokacin sharewa
Saita lokacin da ake buƙata daga mitar farko zuwa mitar tasha, tsoho shine 1s, kuma kewayon saiti yana daga 1ms zuwa 500s. Idan ana buƙatar canzawa, danna Parameter → Sweep Timesoftkey bi da bi, sannan shigar da lamba tare da madannai na lamba, sannan danna softkey naúrar daidai. 
4.2.5 Zaɓan Madogaran Maɗaukaki
Lokacin da janareta na sigina ya karɓi siginar faɗakarwa, yana haifar da fitarwa mai sharewa, sannan yana jiran siginar faɗakarwa na gaba. Tushen share fage na iya zama na ciki, na waje ko jan hankali. Idan ana buƙatar canzawa, danna Siga →Trigger Sourcesoftkey bi da bi.
- Lokacin da aka zaɓi faɗakarwa na ciki, janareta na waveform zai fitar da ci gaba da sharewa, kuma ana ƙayyade ƙimar ta lokacin sharewa.
- Lokacin da aka zaɓi faɗakarwa na waje, janareta na waveform zai kunna ta hanyar kayan aikin mu'amala da na'ura.
- Lokacin da aka zaɓi faɗakarwa na hannu, hasken baya na maɓallin Trigger zai yi walƙiya, danna maɓallin Trigger sau ɗaya, za a fitar da sharewa.
4.2.6 Fitowar Ƙarfafawa
Lokacin da tushen faɗakarwa ya kasance na ciki ko na hannu, siginar faɗakarwa (kalaman murabba'i) na iya fitowa ta hanyar ƙirar ƙirar waje (Input/CNT). Tsohuwar zaɓin fitarwa shine "Rufe". Idan ana buƙatar canzawa, danna Parameter→Trigger Output →Opensoftkey bi da bi.
- A cikin faɗakarwa na ciki, janareta na sigina yana fitar da murabba'in murabba'in 50% na sake zagayowar aiki ta hanyar ƙirar ƙirar waje (Input/CNT bincike) a farkon sharewa.
- A cikin faɗakarwar hannu, janareta na sigina yana fitar da bugun bugun jini wanda ke da faɗin bugun jini fiye da 1us ta hanyar ƙirar ƙirar waje (Input/CNT bincike) a farkon sharewa.
- A cikin faɗakarwa ta waje, ana fitar da fitarwa ta hanyar ƙirar ƙirar ƙira (Input/CNT bincike), amma za a ɓoye zaɓuɓɓukan fitarwa a lissafin sigina.
4.2.7 Cikakken Example
A cikin yanayin share fage, saita siginar igiyar igiyar ruwa tare da 1Vpp amplitude da 50% aikin sake zagayowar azaman siginar sharewa, kuma hanyar sharewa ita ce sharewar layi, saita mitar farko na sharewa zuwa 1kHz da mitar tasha zuwa 50kHz da share lokaci zuwa 2ms.
Yi amfani da haɓakar faɗakarwa na tushen ciki don fitar da igiyar ruwa. Ana ganin takamaiman matakai kamar haka:
- Kunna Ayyukan Shara
Latsa Menu→Sweep→Type→Linear bi da bi don fara aikin Sweep.
- Zaɓi Sweep Waveform
Latsa Maɓallin Wave Mai ɗaukar kaya → Nau'i →Square Wavesoftkey don zaɓar tsarin zazzagewa, kuma ƙirar za ta tashi kamar haka:
Latsa Parametersoftkey, kuma abin dubawa zai tashi kamar haka:
Danna softkey mai dacewa, sannan shigar da ƙimar lambobi da ake buƙata, sannan zaɓi naúrar.
- Saita Matsakaicin Farko/Tasha, Lokacin Sharar, Tushen Tattaunawa da Taimakawa Edge Latsa Returnsoftkey zuwa mai dubawa mai zuwa:
Latsa Parametersoftkey, kuma abin dubawa zai tashi kamar haka:
Danna softkey mai dacewa, sannan shigar da ƙimar lambobi da ake buƙata, sannan zaɓi naúrar.
- Kunna Fitar tashoshi
Danna maɓallin tashar don buɗe fitarwa ta tashar da sauri.
Siffar igiyar igiyar ruwa da aka duba ta oscilloscope ana nunawa kamar haka:
4.3 Fitowar Kalaman Tsakani
UTG1000A yana adana nau'ikan daidaitattun nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan UTG16 ana adana su, ana iya samun sunaye na kowane nau'in igiyar ruwa a cikin tebur 4-1 (jerin raƙuman ruwa da aka gina a ciki).
4.3.1 Kunna Ayyukan Wave Na Tsani
Latsa Menu →Waveform → Nau'in →Arbitrary Wave bi da bi don fara aikin igiyar ruwa na sabani. Na'urar za ta fitar da sigar igiyar ruwa ta sabani tare da saitin yanzu.
4.3.2 Zabin igiyar igiyar ruwa
Masu amfani za su iya zaɓar tsarin igiyar ruwa na sabani a cikin kayan aiki. Latsa siber → Bali ga Selecleoftesoftesofoversofovery don zaɓar buƙatar sabani da aka yi.
| AbsSine | AmpALT | ATTALT | Gaussian Monopulse |
| GaussPulse | SineVer | StairUd | Trapezia |
| LogNormalSinc | Sinc | Electrocardiogram | Electroencephalogram |
| Fihirisar Tashi | Index Falls | Lorentz | D-Lorentz |
Babi na 5 Harbin Matsala
Matsaloli masu yuwuwa da hanyoyin harbin matsala an jera su a cikin masu zuwa. Da fatan za a bi matakan don magance matsaloli.
Idan ba za ku iya sarrafa su ba, tuntuɓi masu rarraba wannan samfur ko ofishin gida, sannan kuma samar da bayanan kayan aikin naku (hanyar saye: latsa Utility →System →System→Game da bi da bi).
5.1 Babu Nuni akan allo (Baƙar allo)
Lokacin da aka danna maɓallin wuta kuma oscilloscope ya kasance baƙar fata:
a) Duba haɗin wutar lantarki
b) Tabbatar cewa kunna wutar lantarki a gefen baya yana kunne kuma an saita shi zuwa "I"
c) Tabbatar cewa maɓallin wuta na gaban panel yana kunne
d) Sake kunna kayan aiki
5.2 Babu Fitar Waveform
Bayan siyan sigina, waveform baya bayyana akan nuni:
① Bincika idan an haɗa kebul na BNC zuwa fitowar tashar
② Bincika idan tashoshi a buɗe yake
Babi na 6 Ayyuka da Tallafawa
6.1 Garanti Kasheview
Uni-T (Uni-Trend Technology (China) Ltd.) yana tabbatar da samarwa da siyar da samfuran, daga ranar isar da dillalan da aka ba da izini na shekaru uku, ba tare da wani lahani a cikin kayan aiki da aikin ba. Idan samfurin ya tabbata yana da lahani a cikin wannan lokacin, UNI-T za ta gyara ko maye gurbin samfurin daidai da cikakken tanadin garanti.
Don shirya gyara ko samun takardar garanti, tuntuɓi sashin tallace-tallace da gyara UNI-T mafi kusa.
Baya ga izini da aka bayar ta wannan taƙaitaccen bayani ko wani garantin inshorar da ya dace, Uni-T baya bayar da wani takamaiman garanti ko fayyace, gami da amma ba'a iyakance ga cinikin samfur ba da manufa ta musamman ga kowane garanti mai ma'ana. A kowane hali, UNI-T don asara kaikaice, na musamman, ko kuma asara ba ta da wani nauyi.
6.2 Tuntube Mu
Idan amfani da wannan samfurin ya haifar da wata matsala, za ku iya tuntuɓar Uni-Trend Technology (China) Limited kai tsaye a babban yankin Sin:
Tsakanin 8:30 na safe zuwa 5:30 na yamma agogon Beijing, Juma'a zuwa Litinin ko ta imel a: infosh@uni-trend.com.cn
Samfura daga yankuna wajen China, tuntuɓi dillalin UNI-T na gida ko cibiyar siyarwa.
Yawancin samfuran da ke goyan bayan UNI-T suna da tsawaita tsarin garanti da lokacin daidaitawa, da fatan za a tuntuɓi dillalin UNI-T na gida ko cibiyar tallace-tallace.
Don samun jerin adireshi na cibiyoyin sabis, da fatan za a ziyarci mu websaiti a URL: http://www.uni-trend.com
Shafi A Jihar Sake saitin Factory
| Siga | Defaults na masana'anta |
| Ma'aunin Tashoshi | |
| Wave mai ɗaukar nauyi na yanzu | Sine Wave |
| Fitar da fitarwa | 50Ω |
| Fitowar aiki tare | Tashoshi |
| Fitar tashoshi | Kusa |
| Juyawa Fitar Tashoshi | Kusa |
| AmpLitude iyaka | Kusa |
| AmpLitude Upper Limit | +5V |
| Amplitude Lower Limit | -5V |
| Basic Wave | |
| Yawanci | 1kHz |
| Ampltide | 100mVp ku |
| DC Offset | 0mV ku |
| Matakin farko | 0° |
| Tsawon aikin Wave Square | 50% |
| Bayanin Ramp Wave | 100% |
| Zagayowar Layi na Pulse Wave | 50% |
| Jagoran Jagora na Pulse Wave | 24ns |
| Wutsiya Edge na Pulse Wave | 24ns |
| Wave na sabani | |
| Girgizar Ƙarƙashin Ƙarƙashin Ƙarfafawa | AbsSine |
| AM Modulation | |
| Tushen Modulation | Na ciki |
| Siffar Modulation | Sine Wave |
| Yawan Modulation | 100Hz |
| Zurfin Zamani | 100% |
| Modulation FM | |
| Tushen Modulation | Na ciki |
| Siffar Modulation | Sine Wave |
| Yawan Modulation | 100Hz |
| Matsakaicin Matsala | 1kHz |
| PM Modulation | |
| Tushen Modulation | Na ciki |
| Siffar Modulation | Sine Wave |
| Matsakaicin Matsayin Modulation | 100Hz |
| Kashe Mataki | 180° |
| PWM Modulation | |
| Tushen Modulation | Na ciki |
| Siffar Modulation | Wave Pulse |
| Yawan Modulation | 100Hz |
| Bayar da Zagayen Ayyuka | 20% |
| TAMBAYA Modulation | |
| Tushen Modulation | Na ciki |
| ASKRate | 100Hz |
| FSK Modulation | |
| Tushen Modulation | Na ciki |
| Mitar Wave Mai ɗauka | 1kHz |
| Mitar Hop | 2MHz |
| FSKRate | 100Hz |
| PSK Modulation | |
| Tushen Modulation | Na ciki |
| Farashin PSK | 100Hz |
| Matsayin PSK | 180° |
| Shafa | |
| Nau'in Shara | Litattafai |
| Mitar farko | 1kHz |
| Mitar Tasha | 2kHz |
| Lokacin Shara | 1s |
| Tushen Turawa | Na ciki |
| Ma'auni na Tsarin | |
| Sauti na Buzzer | Bude |
| Tsarin Lamba | ， |
| Hasken baya | 100% |
| Harshe* | Saitunan masana'anta sun ƙaddara |
Karin Bayani na Fasaha na B
| Nau'in | Saukewa: UTG1020A | Saukewa: UTG1010A | Saukewa: UTG1005A |
| Tashoshi | Tashoshi Guda | ||
| Max. Yawanci | 20MHz | 10MHz | 5MHz |
| Sampda Rate | 125MSa / s | ||
| Waveform | Wave Sine, Wave Square, Wave Triangle, Pulse Wave, Ramp Wave, Noise, DC, Tsararren Waveform | ||
| Yanayin Aiki | Wurin fitarwa, Tsawon lokaci, Modulation, Ana dubawa | ||
| Nau'in Modulation | AM, FM, PM, ASK, FSK, PSK, PWM | ||
| Siffofin Waveform | |||
| Sine Wave | |||
| Yawan Mitar | 1μHz ~ 20MHz | 1μHz ~ 10MHz | 1 μHz ~ 5 MHz |
| Ƙaddamarwa | 1 μHz | ||
| Daidaito | ± 50ppm a cikin kwanaki 90, ± 100ppm a cikin shekara guda (18 ° C ~ 28 ° C) | ||
| Harmonic Distortion Ƙimar Al'ada) |
Yanayin Gwajin: ikon fitarwa 0dBm | ||
| -55dBc | |||
| -50dBc | |||
| -40dBc | |||
| Jimlar Harmonic Distortion (Tsarin Ƙimar) | DC ~ 20kHz, 1Vpp | 0.2% | ||
| Wave Square | |||
| Yawan Mitar | 1 μHz ~ 5 MHz | ||
| Ƙaddamarwa | 1 μHz | ||
| Lokacin Jagora / Wutsiya | 24ns (ƙimar ta yau da kullun, 1kHz, 1Vpp) | ||
| Overshoot (Tsarin Darajar) | 2% | ||
| Zagayen aiki | 0.01% ~ 99.99% | ||
| Min. Pulse | ≥80ns | ||
| Jittering (Tsarin Darajar) | 1ns + 100ppm na lokaci | ||
| Ramp Wave | |||
| Yawan Mitar | 1 μHz ~ 400 kHz | ||
| Ƙaddamarwa | 1 μHz | ||
| Degree marar layi | 1% ± 2 mV (kimanin ƙima, 1kHz, 1Vpp, simmetry 50%) | ||
| Alamar alama | 0.0% zuwa 100.0% | ||
| Min. Lokacin Edge | ≥400ns | ||
| Wave Pulse | |||
| Yawan Mitar | 1 μHz ~ 5 MHz | ||
| Ƙaddamarwa | 1 μHz | ||
| Pulse Idi | ≥80ns | ||
| Lokacin Jagora / Wutsiya | 24ns (ƙimar ta yau da kullun, 1kHz, 1Vpp) | ||
| Overshoot (Tsarin Darajar) | 2% | ||
| Jittering (Tsarin Darajar) | 1ns + 100ppm na lokaci | ||
| DC Offset | |||
| Range (Peak Value AC+DC) | ± 5V (50Ω) | ||
| ± 10V (High Resistance) | |||
| Matsakaicin Matsala | ± (|1% na saitin biya|+0.5% na amp+ 2mV) | ||
| Siffofin Waveform na Arbitrary | |||
| Yawan Mitar | 1 μHz ~ 3 MHz | 1 μHz ~ 2 MHz | 1 μHz ~ 1 MHz |
| Ƙaddamarwa | 1 μHz | ||
| Tsawon Waveform | maki 2048 | ||
| Yanke Shawara | 14bits (ciki har da alamomi) | ||
| Sampda Rate | 125MSa / s | ||
| Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwa | nau'ikan waveform iri 16 | ||
| Siffofin fitarwa | |||
| Amplitude Range | 1mVpp ~ 10Vpp (50Ω,≤10MHz 1mVpp ~ 5Vpp (50Ω, 20MHz) |
1mVpp ~ 10Vpp (50Ω) | |
| 2mVpp ~ 20Vpp (babban juriya, ≤ 10MHz) 2mVpp ~ 10Vpp (babban juriya, ≤20MHz) |
2mVpp ~ 20Vpp (babban juriya) | ||
| Daidaito | 1% na ampdarajar saitin litude ± 2 mV | ||
| AmpLitude Flatness (dangane da sine kalaman na 1kHz, 1Vpp/50Ω) | 100kHz 0.1dB | ||
| 100kHz ~ 10MHz 0.2dB | |||
| Fitar Waveform | |||
| Impedance | Mahimman ƙimar 50Ω | ||
| Insulation | Zuwa waya ta duniya, max.42Vpk | ||
| Kariya | Kariya na gajeren lokaci | ||
| Nau'in Modulation | |||
| AM Modulation | |||
| Wave mai ɗaukar nauyi | Sine Wave, Square Wave, Ramp Wave, Tashin hankali | ||
| Source | Na ciki / Na waje | ||
| Siffar Modulation | Sine Wave, Square Wave, Ramp Wave, Surutu, Tashin Hankali | ||
| Yawan Modulation | 2mHz ~ 50kHz | ||
| Zurfin Zamani | 0% ~ 120% | ||
| Modulation FM | |||
| Wave mai ɗaukar nauyi | Sine Wave, Square Wave, Ramp Wave, Rawanin Arbitrary | ||
| Source | Na ciki / Na waje | ||
| Siffar Motsi | Sine Wave, Square Wave, Ramp Wave, Surutu, Tashin Hankali | ||
| Yawan Modulation | 2mHz ~ 50kHz | ||
| Yawan Matsala | 1 μHz ~ 10 MHz | 1 μHz ~ 5 MHz | 1 μHz ~ 2.5 MHz |
| PM Modulation | |||
| Wave mai ɗaukar nauyi | Sine Wave, Square Wave, Ramp Wave, Tashin hankali | ||
| Source | Na ciki / Na waje | ||
| Siffar Motsi | Sine Wave, Square Wave, Ramp Wave, Surutu, Tashin Hankali | ||
| Yawan Modulation | 2mHz ~ 50kHz | ||
| Kashe Mataki | 0° ~ 360° | ||
| TAMBAYA Modulation | |||
| Wave mai ɗaukar nauyi | Sine Wave, Square Wave, Ramp Wave, Tashin hankali | ||
| Source | Na ciki / Na waje | ||
| Siffar Modulation | Wave Square na zagaye na 50% na aiki | ||
| Yawan Modulation | 2mHz ~ 100kHz | ||
| FSK Modulation | |||
| Wave mai ɗaukar nauyi | Sine Wave, Square Wave, Ramp Wave, Tashin hankali | ||
| Source | Na ciki / Na waje | ||
| Siffar Modulation | Wave Square na zagaye na 50% na aiki | ||
| Yawan Modulation | 2mHz ~ 100kHz | ||
| PSK Modulation | |||
| Wave mai ɗaukar nauyi | Sine Wave, Square Wave, Ramp Wave, Tashin hankali | ||
| Source | Na ciki / Na waje | ||
| Siffar Modulation | Matsakaicin zagayowar aikin 50% | ||
| Yawan Modulation | 2mHz ~ 100kHz | ||
| PWM Modulation | |||
| Wave mai ɗaukar nauyi | Wave Pulse | ||
| Source | Na ciki / Na waje | ||
| Siffar Modulation | Sine Wave, Square Wave, Ramp Wave, Surutu, Tashin Hankali | ||
| Yawan Modulation | 2mHz ~ 50kHz | ||
| Ra'ayin Nisa | 0% ~ 49.99% na fadin bugun jini | ||
| Shafa | |||
| Wave mai ɗaukar nauyi | Sine Wave, Square Wave, Ramp Wave | ||
| Nau'in | Linearity, Logarithm | ||
| Lokacin Shara | 1ms ~ 500s ± 0.1% | ||
| Tushen Turawa | Manual, Ciki, Waje | ||
| Siginar aiki tare | |||
| Matsayin fitarwa | TTL mai jituwa | ||
| Yawan fitarwa | 1μHz ~ 10MHz | 1 μHz ~ 10M Hz | 1 μHz ~ 5 MHz |
| Juriya na fitarwa | 50Ω, ƙima na yau da kullun | ||
| Yanayin Haɗe-haɗe | Kai tsaye Yanzu | ||
| Mai Gaban Bangaren Gaba | |||
| Shigarwar Modulation | ± 5Vpk yayin duk ma'auni | ||
| 20kΩ na juriya na shigarwa | |||
| Fitarwa | TTL mai jituwa | ||
Lissafin Kayayyakin Na'urorin haɗi C
| Nau'in | Saukewa: UTG1000A |
| Standard Na'urorin haɗi | Layin wutar lantarki ya dace da ma'aunin ƙasar gida |
| Kebul na bayanai na USB (UT-D06) | |
| Cable BNC (mita 1) | |
| CD mai amfani | |
| Katin garanti |
Karin Bayani D Kulawa da Tsaftacewa
Gabaɗaya Kulawa
- Kada a adana ko sanya kayan aiki da nunin kristal a cikin hasken rana kai tsaye.
- Don guje wa lalata kayan aiki ko bincike, kar a fesa hazo, ruwa ko sauran ƙarfi akan kayan aiki ko bincike.
Tsaftacewa da Kulawa
- Tsaftace kayan aiki bisa ga yanayin amfani.
- Da fatan za a cire haɗin wutar lantarki, sannan tare da damp amma ba digar laushi mai laushi ba, shafa kayan aikin (ya dace a yi amfani da wakili mai laushi ko ruwa don goge ƙurar da ke cikin kayan aiki, kar a yi amfani da sunadarai ko wakili mai tsabta tare da abubuwa masu ƙarfi kamar benzene, toluene, xylene, acetone, da sauransu.) goge ƙura daga bincike da kayan aiki.
- Lokacin tsaftace allon LCD, da fatan za a kula da kare allon LCD.
- Kada a yi amfani da kowane sinadari mai gogewa akan kayan aiki.
Gargaɗi: Da fatan za a tabbatar da cewa kayan aikin ya bushe gaba ɗaya kafin amfani, don guje wa lalacewa da rauni na mutum wanda gajeriyar kewayawar lantarki ke haifar da danshi.
Mai ƙira:
Uni-Trend Technology (China) Limited kasuwar kasuwa
No 6, Gong Ye Bei ist Road
Masana'antar Haƙƙarfan Masana'antu ta Songshan Lake
Yankin Raya, Dongguan City
Lardin Guangdong
China
Posta! Lambar: 523
hedkwatar:
Uni-Trend Group Limited kasuwar kasuwa
Rm901, 9/F, Nanyang Plaza
57 An Rataya Zuwa Hanya
Kwan Tong
Kowloon, Hong Kong
Lambar waya: (852) 2950 9168
Fax: (852) 2950 9303
Imel: info@uni-trend.com
http://Awww.uni-trend.com
Takardu / Albarkatu
 |
UNI-T UTG1000 Series Aiki Sarrafa Waveform Generator [pdf] Manual mai amfani UTG1000 Series Aiki Mai Haɓaka Waveform Generator, UTG1000 Series, Aiki Mai Haɓaka Waveform Generator |