Nice Roll-Control2 Z Wave Makaho da Mai sarrafa rumfa

Bayanin Samfurin da Fasaloli
Roll-Control2 yana ba da damar sarrafa ramut na makafi, makafi na venetian, pergolas, labule, rumfa, da injunan makafi sanye take da na'urorin lantarki ko na injina.

Shigarwa

Kafin Shigarwa
Haɗa na'urar ta hanyar da ba ta dace da littafin ba na iya haifar da haɗari. Bi jagororin wayar da aka bayar.

Matakan Shigarwa

1. Kashe mains voltage.
2. Bude akwatin sauya bango.
3. Haɗa ta bin tsarin wayoyi da aka bayar.
4. Tabbatar da haɗin kai daidai.
5. Shirya na'urar a cikin akwatin canza bango.
6. Rufe akwatin canza bango.
7. Canja kan mains voltage.

Lura: Yi amfani da igiyoyin shigarwa masu dacewa da masu haɗin kai kamar yadda aka ƙayyade a cikin jagorar.

Ƙara zuwa Z-Wave Network

Don ƙara na'urar zuwa cibiyar sadarwar Z-Wave:

1. Nemo takamaiman maɓalli (DSK) akan akwatin.
2. Bi umarnin da aka bayar don fara haɗawa.

Cire daga Z-Wave Network
Don cire na'urar daga hanyar sadarwar Z-Wave, bi matakan da aka zayyana a cikin jagorar.

Daidaitawa

1. Ƙara ko rage ƙimar sigina kamar yadda aka ba da shawara a cikin jagorar don daidaita na'urar.
2. Idan gyare-gyare ya gaza, yi amfani da saitunan siga na hannu don daidaita lokacin motsi.

FAQ

• Tambaya: Yaya nisan kewayon na'urar Roll-Control2?
  A: Na'urar tana da kewayon har zuwa mita 100 a waje kuma har zuwa mita 30 a cikin gida, ya danganta da yanayin ƙasa da tsarin gini.
• Tambaya: Menene shawarar samar da wutar lantarki don Roll-Control2?
  A: The shawarar samar da wutar lantarki ne 100-240 V ~ a 50/60 Hz.

MUHIMMAN BAYANIN TSIRA

  HANKALI! – Karanta wannan littafin kafin yunƙurin shigar da na'urar! Rashin kiyaye shawarwarin da aka haɗa a cikin wannan jagorar na iya zama haɗari ko haifar da keta doka. Mai sana'anta, NICE SpA Oderzo TV Italia ba za ta ɗauki alhakin duk wani asara ko lalacewa sakamakon rashin bin umarnin jagorar aiki ba.

HADARIN WUTA! 

• An ƙera na'urar don yin aiki a cikin shigarwar gida na lantarki. Haɗin da ba daidai ba ko amfani zai iya haifar da gobara ko girgiza wutar lantarki.
• Ko da lokacin da na'urar ke kashe, voltage na iya kasancewa a tashoshi. Duk wani gyare-gyaren da ke gabatar da canje-canje a cikin tsarin haɗin kai ko kaya dole ne a yi shi tare da fuse maras kyau.
• Don guje wa haɗarin girgiza wutar lantarki, kar a yi amfani da na'urar tare da rigar hannu ko rigar hannu.
• Duk ayyukan da ke kan na'urar za a iya yin su kawai ta ƙwararren ƙwararren lantarki kuma mai lasisi. A kiyaye dokokin kasa.

HANKALI!

• Kar a gyara! – Kada a gyara wannan na'urar ta kowace hanya da ba a haɗa ta cikin wannan littafin ba.
• Sauran na'urori - Mai ƙira, NICE SpA Oderzo TV Italia ba za ta ɗauki alhakin kowane lalacewa ko asarar gata na garanti na sauran na'urorin da aka haɗa ba idan haɗin bai dace da littattafansu ba.
• An yi nufin wannan samfurin don amfani na cikin gida kawai a busassun wurare. - Kada ku yi amfani da damp ko wurare masu jika, kusa da baho, kwanon ruwa, shawa, wurin shakatawa, ko kuma duk inda ruwa ko danshi yake.
• Ba a ba da shawarar yin aiki da duk makafi a lokaci ɗaya ba. Don dalilai na tsaro, aƙalla makaho ɗaya yakamata a sarrafa shi da kansa, yana ba da amintacciyar hanyar tserewa idan akwai gaggawa.
• Ba abin wasa ba! – Wannan samfurin ba abin wasa bane. Ka nisanci yara da dabbobi!

BAYANI DA SIFFOFI

NICE Roll-Control2 na'ura ce da aka ƙera don sarrafa makafi, rumfa, labulen venetian, labule da pergolas.
NICE Roll-Control2 yana ba da damar daidaita madaidaicin makafi ko makafi na venetian. Yana ba ku damar sarrafa na'urorin da aka haɗa ta hanyar hanyar sadarwar Z-Wave® ko ta hanyar sauyawa da aka haɗa kai tsaye zuwa gare ta. Na'urar tana dauke da sa ido kan makamashi.

Babban fasali

• Za a iya amfani da:
  • Roller blinds
  • Makafin Venetian
  • Pergolas
  • Labule
  • rumfa
  • Motoci makafi tare da na'urorin lantarki ko na injina
• Yana da ma'aunin makamashi
• Yana goyan bayan hanyoyin tsaro na cibiyar sadarwa na Z-Wave®: S0 tare da boye-boye AES-128 da ingantaccen yanayin S2 tare da ɓoyayyen tushen PRNG.
• Yana aiki azaman mai maimaita siginar Z-Wave® (duk na'urorin da basa sarrafa batir a cikin hanyar sadarwar suna aiki azaman masu maimaitawa don ƙara amincin hanyar sadarwar)
• Ana iya amfani da shi tare da duk na'urorin da aka tabbatar da takardar shaidar Z-Wave Plus® kuma yana dacewa da irin waɗannan na'urorin da wasu masana'antun suka samar.
• Yana aiki tare da nau'ikan maɓalli daban-daban. Don jin daɗin amfani, ana ba da shawarar yin amfani da na'urorin da aka keɓe don aikin na'urar rufewa (monostable, na'urorin rufewa)

Na'urar samfurin Z-Wave Plus® ne na Tsaro da aka kunna kuma ana buƙatar amfani da Mai Kula da Z-Wave® na Tsaro don cikakken amfani da samfurin.

BAYANI

Table A1 - Roll-Control2 - Ƙayyadaddun bayanai
Tushen wutan lantarki	100-240 V ~ 50/60 Hz
Ƙididdigar kaya na halin yanzu	2 A don injina tare da abubuwan wutar lantarki da aka biya (nauyin inductive)
Nau'in kaya masu jituwa	Motocin AC guda ɗaya
Maɓallan iyaka da ake buƙata	Electronic ko makaniki
An ba da shawarar kariyar wuce gona da iri na waje	10 A Nau'in B (EU) 13 Nau'in B (Sweden)
Don shigarwa a cikin kwalaye	Ø = 60 mm, zurfin ≥ 60 mm
Wayoyin da aka ba da shawarar	Tsakanin yanki tsakanin 0.75-1.5 mm2 ya cire 8 - 9 mm na rufi
Yanayin aiki	0 - 35 ° C
Yanayin yanayi	10-95% RH ba tare da condensation ba
Ka'idar rediyo	Z-Wave (guntu 800)
Band mitar rediyo	EU: 868.4 MHz, 869.85 MHz AH: 919.8 MHz, 921.4 MHz
Max. watsa iko	+ 6 dBm
Rage	har zuwa 100 m a waje har zuwa 30 m a cikin gida (dangane da ƙasa da tsarin gini)
Girma (tsawo x nisa x zurfin)	46 × 36 × 19.9 mm
Yin biyayya ga umarnin EU	RoHS 2011/65 / EU RED 2014/53 / EU

Lura
Mitar rediyo na na'urar guda ɗaya yana buƙatar zama iri ɗaya da mai sarrafa Z-Wave ɗin ku. Duba bayani akan akwatin ko tuntuɓi dillalin ku idan ba ku da tabbas.

SHIGA

Kafin shigarwa

Haɗa na'urar ta hanyar da ba ta dace da wannan jagorar na iya haifar da haɗari ga lafiya, rayuwa ko lalacewa ta abu ba.

• Kar a kunna na'urar kafin a hada ta gaba daya a cikin akwatin hawa.
• Haɗa kawai daidai da hotunan da ke ƙasa.
• Shigar kawai a cikin akwatunan hawa masu ɗorewa masu dacewa da ƙa'idodin aminci na ƙasa kuma tare da zurfin da bai wuce mm 60 ba.
• Kar a haɗa na'urori waɗanda basu dace da ƙayyadaddun bayanai ko ƙa'idodin aminci masu dacewa ba.
• Kar a haɗa na'urorin dumama.
• Kar a haɗa hanyoyin SELV ko PELV.
• Tabbatar cewa na'urorin lantarki da aka yi amfani da su wajen shigarwa sun dace da matakan tsaro masu dacewa.
• Tabbatar cewa tsawon wayoyi da aka yi amfani da su don haɗa maɓallin sarrafawa bai kamata ya wuce mita 20 ba.
• Haɗa makafin AC Motors tare da na'urorin lantarki ko na inji kawai.

Bayanan kula don Hoton 1:

• O1 - tashar fitarwa ta 1st don motar rufewa
• O2 - tashar fitarwa ta 2 don motar rufewa
• S1 - tashar tashar wutar lantarki ta 1st (kuma ana amfani da ita don ƙara / cire na'urar)
• S2 - tashar tashar sauyawa ta 2 (kuma ana amfani da ita don ƙara / cire na'urar)
• N - tashoshi don jagorar tsaka tsaki (haɗe a ciki)
• L - tashoshi don jagorar kai tsaye (haɗe a ciki)
• PROG – maɓallin sabis (an yi amfani da shi don ƙarawa / cire na'urar da kewaya menu)

Tsanaki!

Jagororin cire wayoyi masu dacewa da waya
Sanya wayoyi KAWAI a cikin ramin ƙarshen na'urar. Don cire kowane wayoyi, danna maɓallin saki, wanda yake saman ramin (s).

Shigarwa 

1. Kashe mains voltage (kashe fuse).
2. Bude akwatin sauya bango.
3. Haɗa bin Hoto na 2 a hannun dama.
4. Tabbatar idan an haɗa na'urar daidai.
5. Shirya na'urar a cikin akwatin canza bango.
6. Rufe akwatin canza bango.
7. Canja kan mains voltage.

Bayanan kula

• Don haɗa bangon bangon waje yi amfani da wayoyi masu tsalle idan ya cancanta.
• Idan kana amfani da Yubii Home app, ba lallai ne ka damu da haɗa kwatance daidai ba. Kuna iya canza kwatance a cikin mayen da saitunan na'ura a cikin aikace-aikacen hannu.

Tsanaki
Za a iya amfani da wayoyi masu tsalle-tsalle da aka kawo don haɗa maɓallan bango kawai. Yi amfani da kebul ɗin shigarwa mai dacewa don gudanar da nauyin halin yanzu na na'urar. Sauran abubuwan shigarwa (gadowa) kuma suna buƙatar haɗa su tare da kebul na shigarwa mai dacewa. Idan ya cancanta, yi amfani da mahaɗin igiyoyin lantarki masu dacewa.

KARA Z-WAVE NETWORK

Ƙara (Haɗuwa) - yanayin koyo na na'urar Z-Wave yana ba ku damar ƙara na'urar zuwa cibiyar sadarwar Z-Wave data kasance.

Manuallyara da hannu

Don ƙara na'urar zuwa cibiyar sadarwar Z-Wave da hannu:

1. Wutar da na'urar. Idan ba a ƙara na'urar zuwa cibiyar sadarwar Z-Wave ba, alamar LED na na'urar tana haskaka ja.
2. Saita babban mai sarrafawa a cikin yanayin ƙara (Tsaro/Ba Tsaro) (don ƙarin bayani, duba littafin jagorar).
3. Da sauri, danna maɓallin PROG akan na'urar sau uku. A madadin, danna sauri S1 ko S2 sau uku.
4. Idan kana ƙara na'urar a cikin Ingantacciyar yanayin Tsaro S2, shigar da lambar PIN, wacce ke kan na'urar. Lambar PIN kuma wani yanki ne mai layi na takamaiman maɓalli (DSK) da aka lakafta a ƙasan akwatin.
5. Jira alamar LED ta kyafta rawaya.
6. An tabbatar da ƙara nasara ta saƙon mai sarrafa Z-Wave da alamar LED na na'urar:
   Kore - nasara (mara tsaro, S0, S2 mara inganci)
   Magenta - nasara (Tsaro S2 Ingantacce)
   Ja – ba nasara

Dingara ta amfani da SmartStart
Maganin SmartStart yana ba da damar haɓaka samfura cikin hanyar sadarwar Z-Wave ta hanyar duba lambar QR ɗin Z-Wave da ke kan samfurin tare da mai sarrafawa yana ba da haɗa SmartStart. Ana ƙara samfurin SmartStart ta atomatik a cikin mintuna 10 bayan kunnawa a kewayon cibiyar sadarwa.

Don ƙara na'urar zuwa cibiyar sadarwar Z-Wave ta amfani da SmartStart:

1. Don amfani da mafita na SmartStart mai sarrafa ku yana buƙatar goyan bayan yanayin S2 na Tsaro (don ƙarin bayani, duba jagorar mai sarrafawa).
2. Shigar da cikakken lambar zaren DSK zuwa mai sarrafa ku. Idan mai sarrafa ku yana da ikon duba QR, duba lambar QR da aka sanya akan lakabin.
3. Wutar da na'urar (kunna mains voltagda).
4. Alamar LED ta fara ƙyalli rawaya, jira tsarin ƙarawa ya ƙare.
5. An tabbatar da ƙara nasara ta saƙon mai sarrafa Z-Wave da alamar LED na na'urar:
   Kore - nasara (mara tsaro, S0, S2 yanayin mara inganci),
   Magenta - nasara (Tsarin S2 Ingancin yanayin),
   Ja – ba nasara

Lura
Idan akwai matsaloli tare da ƙara na'urar, da fatan za a sake saita na'urar kuma maimaita hanyar ƙarawa.

CIRE DAGA Z-WAVE NETWORK

Ana cirewa (Bandawa) - yanayin koyo na na'urar Z-Wave yana ba ku damar cire na'urar daga cibiyar sadarwar Z-Wave da ke akwai.

Don cire na'urar daga cibiyar sadarwar Z-Wave:

1. Tabbatar cewa na'urar tana da ƙarfi.
2. Saita babban mai sarrafawa a cikin yanayin cirewa (don ƙarin bayani, duba jagorar mai sarrafawa).
3. Da sauri, danna maɓallin PROG sau uku. A madadin, danna sauri S1 ko S2 sau uku a cikin mintuna 10 na kunna na'urar.
4. Jira tsarin cirewa ya ƙare.
5. An tabbatar da nasarar cirewa ta hanyar saƙon mai sarrafa Z-Wave.
6. Alamar LED na na'urar tana haskaka ja.

Lura
Cire na'urar daga cibiyar sadarwar Z-Wave baya haifar da sake saitin masana'anta.

RADDEWA

Calibration wani tsari ne wanda na'urar ke koyon matsayi na iyakoki da kuma halayen mota. Daidaitawa ya zama tilas don na'urar ta gane daidai matsayin makaho. Hanyar ta ƙunshi cikakken motsi ta atomatik, tsakanin madaidaicin maɓalli (masu motsi na sama/ƙasa).

Daidaitawa ta atomatik ta amfani da menu

1. Latsa ka riƙe maɓallin PROG don shigar da menu.
2. Maɓallin sakewa lokacin da na'urar tayi haske (wuri na farko).
3. Da sauri danna maballin don tabbatarwa.
4. Na'urar tana aiwatar da tsarin daidaitawa, tana kammala cikakken zagayowar - ƙungiyoyi biyu na sama da ƙasa. A lokacin calibration LED ɗin yana lumshe shuɗi.
5. Idan daidaitawar ya yi nasara, alamar LED tana haskaka kore. Idan daidaitawar ta gaza, alamar LED tana haskaka ja.
6. Gwada ko sakawa yana aiki daidai.

Daidaitawa ta atomatik ta amfani da siga

1. Saita siga 150 zuwa 3.
2. Na'urar tana aiwatar da tsarin daidaitawa, tana kammala cikakken zagayowar - ƙungiyoyi biyu na sama da ƙasa. A lokacin gyare-gyaren alamar LED tana ƙyalli shuɗi.
3. Idan daidaitawar ya yi nasara, alamar LED tana haskaka kore. Idan daidaitawar ta gaza, alamar LED tana haskaka ja.
4. Gwada ko sakawa yana aiki daidai.

Bayanan kula: 

• Idan kuna amfani da Yubii Home App, kuna iya yin gyare-gyare daga mayen ko daga saitunan na'urar.
• Tsarin daidaitawa zai iya aiki mafi kyau idan kun sanya makafi a tsakiyar bude wuri kafin farawa.
• Kuna iya dakatar da tsarin daidaitawa a kowane lokaci ta danna maɓallin PROG ko maɓallan waje.
• Lantarki halaye na Motors iya bambanta, wanda zai iya haifar da calibration gazawar. Don gyara wannan matsalar kuna iya:
  1. Ƙara darajar siga 154, misali zuwa daƙiƙa 5 kafin sake gwadawa.
  2. Idan gyare-gyaren bai yi nasara ba, rage darajar siga 155 zuwa 1 W kafin sake gwadawa.
  3. Idan matakan 1 da 2 sun gaza, saita siga 155 zuwa 0 kuma yi amfani da sigogi 156 da 157 don saita lokacin motsi da hannu. Bayan saita lokaci da hannu yana da mahimmanci don matsar da abin nadi zuwa wurare biyu na ƙarshe (cikakken buɗewa kuma cikakke) ta yadda tsarin zai iya amfani da ƙayyadadden lokacin motsi.

Matsayin da hannu na slats a yanayin makafi na venetian

1. Saita siga 151 zuwa 1 (0-90°) ko 2 (0-180°), ya danganta da ƙarfin jujjuyawar slats.
2. Ta hanyar tsoho, an saita sigina 152 zuwa 15, wanda ke nufin cewa lokacin canji tsakanin matsayi na ƙarshe yana daidai da 1.5 seconds.
3. Juya slats tsakanin ƙarshen matsayi ta riƙe maballin:
   • Idan bayan cikakken zagayowar makaho ya fara motsawa sama ko ƙasa - rage ƙimar siga 152.
   • Idan bayan cikakken zagayowar slats ba su kai ga ƙarshen matsayi ba - ƙara darajar siga 152.
4. Maimaita matakin da ya gabata har sai an sami gamsasshen matsayi.
5. Gwada ko sakawa yana aiki daidai. Daidaitaccen gyare-gyaren slat ɗin bai kamata ya tilasta makafin motsi sama ko ƙasa ba.

AMFANI DA NA'urar

Na'urar tana ba da damar haɗawa zuwa tashoshin S1 da S2. Waɗannan na iya zama maɓalli masu motsi ko bistable. Maɓallin sauyawa suna da alhakin sarrafa motsin makaho.

Bayani:
- Canja haɗi zuwa tashar S1
- Canja haɗi zuwa tashar S2

Gabaɗaya shawarwari:

• Kuna iya farawa, tsayawa, ko canza alkiblar motsi ta amfani da maɓalli ko musaye
• Idan kun saita zaɓin kariyar tukunyar furen ana aiwatar da aikin ƙasa zuwa ƙayyadadden matakin kawai.
• Idan kun sarrafa matsayi makaho kawai (ba jujjuyawa ba) slats suna komawa matsayinsu na baya (a matakin buɗewa 0 - 95%).

Maɓallai masu motsi - danna don motsawa

Exampna canza zane:

Tebura A2 – Roll-Control2 – Monostable sauya – danna don matsawa
Siga:	20. Canja nau'in
Bayani:	Wannan siga yana ƙayyade nau'ikan sauyawa da yanayin shigar S1 da S2 ke aiki da su.
Saita ƙima:	0 – Maɓallai masu motsi – danna don motsawa

Siga:	151. Nadi makaho, rumfa, Pergola ko Labule
Bayani:	1 × danna      canzawa – Fara motsi zuwa matsayi iyaka Danna gaba - tsayawa 1 × danna      canza - Fara saukar motsi zuwa matsayi iyaka 2 × danna    canzawa – Matsayin da aka fi so Rike      – Up motsi har sai a saki Rike      – Down motsi har sai da saki
Akwai dabi'u:	0

Siga:	151. Makaho Venetian
Bayani:	1 × danna      canzawa – Fara motsi zuwa matsayi iyaka Danna gaba - matsawa zuwa matsayi na dama 1 × danna   canza - Fara saukar motsi zuwa matsayi iyaka 2 × danna    canzawa – Matsayin da aka fi so Rike   – Juya slats har sai an saki Rike      – Juya slats ƙasa har sai an saki
Akwai dabi'u:	1 ko 2

Matsayin da aka fi so - akwai

Maɓallai masu motsi - riƙe don motsawa

Exampna canza zane:

Tebura A3 - Roll-Control2 - Maɓallai masu iya canzawa - riƙe don motsawa
Siga:	20. Canja nau'in
Bayani:	Wannan siga yana ƙayyade nau'ikan sauyawa da yanayin shigar S1 da S2 ke aiki da su.
Saita ƙima:	1 – Maɓallai masu motsi – riƙe don motsawa

Siga:	151. Nadi makaho, rumfa, Pergola ko Labule
Bayani:	1 × danna      canza - 10% sama motsi 1 × danna      canza - 10% saukar motsi 2 × danna canzawa – Matsayin da aka fi so Rike – Up motsi har sai a saki Rike  – Down motsi har sai da saki
Akwai dabi'u:	0

Siga:	151. Makaho Venetian
Bayani:	1 × danna      canza - Slats yana jujjuya sama ta matakin da aka riga aka ƙayyade 1 × danna      canza - Slats yana jujjuya ƙasa ta matakin da aka riga aka ƙayyade 2 × danna  canzawa – Matsayin da aka fi so Rike       – Up motsi har sai a saki Rike  – Down motsi har sai da saki
Akwai dabi'u:	1 ko 2

Matsayin da aka fi so - akwai
Idan ka riƙe maɓalli fiye da lokacin motsi + ƙarin daƙiƙa 4 (tsohuwar 1,5s+4s = 5,5s) na'urar zata tafi iyaka. A wannan yanayin sakin maɓalli ba zai yi komai ba.

Maɓalli guda ɗaya mai motsi

Exampna canza zane:

Tebur A4 - Roll-Control2 - Single monostable canji
Siga:	20. Canja nau'in
Bayani:	Wannan siga yana ƙayyade nau'ikan sauyawa da yanayin shigar S1 da S2 ke aiki da su.
Saita ƙima:	2- Sauye-sauye guda ɗaya

Siga:	151. Nadi makaho, rumfa, Pergola ko Labule
Bayani:	1 × danna – Fara motsi zuwa matsayi iyaka Danna gaba - tsayawa Ɗayan dannawa - Fara motsi zuwa matsakaicin matsayi 2× danna – Matsayin da aka fi so Riƙe – Fara motsi har sai an saki
Akwai dabi'u:	0

Siga:	151. Makaho Venetian
Bayani:	1 × danna – Fara motsi zuwa matsayi iyaka Danna gaba - tsayawa Ɗayan dannawa - Fara motsi zuwa matsakaicin matsayi 2× danna – Matsayin da aka fi so Riƙe – Fara motsi har sai an saki
Akwai dabi'u:	1 ko 2

Matsayin da aka fi so - akwai

Maɓallin Bistable

Exampna canza zane:

Tebura A5 - Roll-Control2 - Bistaile switches
Siga:	20. Canja nau'in
Bayani:	Wannan siga yana ƙayyade nau'ikan sauyawa da yanayin shigar S1 da S2 ke aiki da su.
Saita ƙima:	3-Abubuwan da suka faru

Siga:	151. Nadi makaho, rumfa, Pergola ko Labule
Bayani:	1 × danna (rufe kewaye) - Fara motsi zuwa matsayi iyaka Na gaba danna kan iri ɗaya - Tsaya maɓalli iri ɗaya ( buɗe da'irar)
Akwai dabi'u:	0

Siga:	151. Makaho Venetian
Bayani:	1 × danna (rufe kewaye) - Fara motsi zuwa matsayi iyaka Na gaba danna kan iri ɗaya - Tsaya maɓalli iri ɗaya ( buɗe da'irar)
Akwai dabi'u:	1 ko 2

Matsayin da aka fi so - babu

Sauya bistabile guda ɗaya

Exampna canza zane:

Table A6 - Roll-Control2 - Single bistable sauya
Siga:	20. Canja nau'in
Bayani:	Wannan siga yana ƙayyade nau'ikan sauyawa da yanayin shigar S1 da S2 ke aiki da su.
Saita ƙima:	4- Sauye-sauye guda ɗaya

Siga:	151. Nadi makaho, rumfa, Pergola ko Labule
Bayani:	1 × danna – Fara motsi zuwa matsayi iyaka Danna gaba - tsayawa Ɗayan dannawa - Fara motsi zuwa matsakaicin matsayi Danna gaba - tsayawa
Akwai dabi'u:	0

Siga:	151. Makaho Venetian
Bayani:	1 × danna – Fara motsi zuwa matsayi iyaka Danna gaba - tsayawa Ɗayan dannawa - Fara motsi zuwa matsakaicin matsayi Danna gaba - tsayawa
Akwai dabi'u:	1 ko 2

Matsayin da aka fi so - babu

Sauya jaha uku

Exampna canza zane:

Teburin A7 - Roll-Control2 - Canjin jihohi uku
Siga:	20. Canja nau'in
Bayani:	Wannan siga yana ƙayyade nau'ikan sauyawa da yanayin shigar S1 da S2 ke aiki da su.
Saita ƙima:	5

Siga:	151. Nadi makaho, rumfa, Pergola ko Labule
Bayani:	1 × danna - Fara motsi zuwa iyakar matsayi a cikin hanyar da aka zaɓa har sai mai canzawa ya zaɓi umarnin tsayawa
Akwai dabi'u:	0

Siga:	151. Makaho Venetian
Bayani:	1 × danna - Fara motsi zuwa iyakar matsayi a cikin hanyar da aka zaɓa har sai mai canzawa ya zaɓi umarnin tsayawa
Akwai dabi'u:	1 ko 2

Matsayin da aka fi so - babu

Matsayin da aka fi so
Na'urarka tana da ingantacciyar hanyar saita wuraren da aka fi so.
Kuna iya kunna ta ta danna sau biyu akan maɓalli (waɗanda aka haɗa) da aka haɗa zuwa na'urar ko daga wayar hannu (app mobile).

Matsayin makaho da aka fi so
Kuna iya ayyana matsayin da aka fi so na makafi. Ana iya saita shi a cikin siga 159. An saita ƙimar tsoho zuwa 50%.

Matsayin da aka fi so
Kuna iya ayyana matsayin da aka fi so na kusurwar slats. Ana iya saita shi a cikin siga 160. An saita ƙimar tsoho zuwa 50%.

Kariyar tukunya
Na'urar ku tana da ingantacciyar hanyar kariya, misaliample, furanni a kan windowsill. Wannan shine abin da ake kira madaidaicin iyaka. Kuna iya saita ƙimar sa a cikin siga 158. Ƙimar tsoho ita ce 0 - wannan yana nufin cewa makaho yana motsawa tsakanin matsakaicin matsayi na ƙarshe.

LED Manuniya
Wurin da aka gina a ciki yana nuna halin yanzu na na'urar lokacin da na'urar ke aiki.

Table A8 - Roll-Control2 - LED launuka da ma'ana
Launi	Bayani
Kore	Na'urar da aka ƙara zuwa cibiyar sadarwar Z-Wave (ba amintacce, S0, S2 ba Ingancewa)
Magenta	Na'urar da aka ƙara zuwa cibiyar sadarwar Z-Wave (Tabbataccen Tsaro S2)
Ja	Ba a ƙara na'urar zuwa cibiyar sadarwar Z-Wave ba
Cyan kiftawa	Ana cigaba da aiki

MENU

Yin amfani da menu na na'ura da aka gina za ku iya daidaita na'urar ko yin sake saitin masana'anta.

Don amfani da menu na na'ura da aka gina:

1. Kashe mains voltage (kashe fuse).
2. Cire na'urar daga akwatin canza bango.
3. Canja kan mains voltage.
4. Latsa ka riƙe maɓallin PROG don shigar da menu.
5. Jira alamar LED don nuna matsayin menu da ake so tare da launi:
   • BLUE - autocalibration
   • YELLOW - sake saitin masana'anta
6. Da sauri saki kuma danna maɓallin PROG kuma.
7. Bayan danna maɓallin PROG, alamar LED tana tabbatar da matsayin menu ta hanyar kiftawa.

SADARWA ZUWA SAMUN DATAULT

Hanyar sake saitin yana ba ku damar mayar da na'urar zuwa saitunan masana'anta, wanda ke nufin an share duk bayanai game da mai sarrafa Z-Wave da daidaitawar mai amfani.
Da fatan za a yi amfani da wannan hanya kawai lokacin da babban mai sarrafa cibiyar sadarwa ya ɓace ko kuma ba ya aiki.

1. Kashe mains voltage (kashe fuse).
2. Cire na'urar daga akwatin canza bango.
3. Canja kan mains voltage.
4. Latsa ka riƙe maɓallin PROG don shigar da menu.
5. Jira alamar LED don haskaka rawaya.
6. Da sauri saki kuma danna maɓallin PROG kuma.
7. A lokacin sake saitin masana'anta, mai nuna alamar LED yana kiftawa rawaya.
8. Bayan ƴan daƙiƙai an sake kunna na'urar, wanda aka yi masa sigina tare da jan launi na alamar LED.

MATSALAR KARFI
Na'urar tana ba da damar saka idanu akan amfani da makamashi. Roll-Control2 yana ba da rahoton yawan kuzari, amma baya bayar da rahoton wutar lantarki nan take. Ana aika bayanai zuwa babban mai sarrafa Z-Wave.
Ana aiwatar da aunawa ta hanyar fasahar micro-controller mafi ci gaba, yana tabbatar da daidaito da daidaito (+/- 5% don lodi sama da 10 W).

Wutar lantarki - makamashin da na'urar ke cinyewa ta tsawon lokaci. Masu amfani da wutar lantarki a gidaje suna biyan kuɗi ta masu kaya bisa ƙarfin aiki da aka yi amfani da su a cikin adadin lokaci. Mafi yawan aunawa a cikin kilowatt-hour [kWh]. Awa daya kilowatt daidai yake da kilowatt daya na wutar da aka cinye a tsawon awa daya, 1 kWh = 1000 Wh.

Sake saita ƙwaƙwalwar ajiya:
Za'a iya ƙaddamar da sake saitin žwažwalwar ajiya mai amfani ta hanyar cibiyar sadarwa (BUI) ko mai sarrafa Z-Wave ta amfani da Meter CC. Hakanan ana aiwatar da sake saitin žwažwalwar ajiya mai amfani, yayin sake saiti zuwa tsarin ɓangarorin masana'anta.

TSIRA

Associationungiya (haɗa na'urori) - sarrafa kai tsaye na wasu na'urori a cikin tsarin tsarin Z-Wave.

Ƙungiyoyi suna ba da damar:

• Bayar da rahoton halin na'urar zuwa mai sarrafa Z-Wave (ta amfani da rukunin Lifeline).
• Ƙirƙirar keɓancewa masu sauƙi ta hanyar sarrafa wasu na'urori ba tare da sa hannun babban mai sarrafawa ba (amfani da ƙungiyoyin da aka sanya wa ayyuka akan na'urar).
• Umurnai aika zuwa ƙungiya ta 2nd suna nuna aikin maɓalli bisa ga tsarin na'urar, misali fara motsin makafi ta amfani da maɓallin yana aika firam ɗin alhakin wannan aikin.

Na'urar tana ba da haɗin ƙungiyoyi 2:

• Ƙungiyar ƙungiya ta 1st - "Lifeline" tana ba da rahoton matsayin na'urar kuma yana ba da damar sanya na'ura ɗaya kawai (babban mai sarrafawa ta tsohuwa).
• Ƙungiyar ƙungiya ta 2 - "Window Covering" an yi niyya don labule ko makafi yana ba mai amfani damar sarrafa adadin hasken da ke shiga ta windows.

Na'urar tana ba da damar sarrafa na'urori 5 na yau da kullun ko na tashoshi da yawa a kowace ƙungiyar ƙungiya, ban da rukunin Lifeline wanda aka keɓe don mai sarrafawa kawai don haka kumburin 1 kawai za a iya sanyawa.

Don ƙara ƙungiya:

1. Jeka Saituna .
2. Je zuwa Na'urori.
3. Zaɓi na'urar da ta dace daga lissafin.
4. Zaɓi shafin Ƙungiyoyi.
5. Ƙayyade ƙungiya da na'urori don haɗawa da su.
6. Ajiye canje-canjenku.

Tebura A9 - Roll-Control2 - Rukunin umarni da umarni
Rukuni	Profile	Ajin Umurni & Umurni	Sunan rukuni
1	Gabaɗaya: Rayuwa (0x00: 0x01)	COMMAND_CLASS_DEVICE_RESET_LOCALLY [0x5A]	Hanyar rayuwa
		DEVICE_RESET_LOCALLY_SANARWA [0x01]
		COMMAND_CLASS_WINDOW_COVERING [0x6A]
		WINDOW_COVERING_REPORT [0x04]
		COMMAND_CLASS_SWITCH_MULTILEVEL [0x26]
		SWITCH_MULTILEVEL_REPORT [0x26]
		COMMAND_CLASS_METER [0x32]
		METER_REPORT [0x02]
		COMMAND_CLASS_SANARWA [0x71]
		NOTIFICATION_REPORT [0x05]
		COMMAND_CLASS_CENTRAL_SCENE [0x5B]
		CENTRAL_SCENE_NOTIFICATION [0x03]
		COMMAND_CLASS_CONFIGURATION [0x70]
		CONFIGURATION_REPORT [0x06]
2	Sarrafa: KEY01 (0x20: 0x01)	COMMAND_CLASS_WINDOW_COVERING [0x6A]	Rufin Window
		WINDOW_COVERING_SET [0x05]
		COMMAND_CLASS_WINDOW_COVERING [0x6A]
		WINDOW_COVERING_START_LEVEL_CHANGE [0x06]
		COMMAND_CLASS_WINDOW_COVERING [0x6A]
		WINDOW_COVERING_STOP_LEVEL_CHANGE [0x07]

Tebur A10 - Roll-Control2 - Ƙungiyar Ƙungiyar 2: Taga mai rufe matsayi da ƙimar Id
Id	Matsayin daidaitawa		Sunan Mai Rufe Taga	Taga Mai Rufe id
Id_Roller	0	Ba a daidaita na'urar ba	FITA_BOTTOM_1	12 (0x0C)
	1	Nasarar daidaitawa ta atomatik	FITA_ BOTTOM _2	13 (0x0D)
	2	Gyaran atomatik ya gaza	FITA_BOTTOM_1	12 (0x0C)
	4	Daidaitawa da hannu	FITA_ BOTTOM _2	13 (0x0D)
Id_Slats	0	Ba a daidaita na'urar ba	HORIZONTAL_SLATS_ANGLE_1	22 (0x16)
	1	Nasarar daidaitawa ta atomatik	HORIZONTAL_SLATS_ANGLE_2	23 (0x17)
	2	Gyaran atomatik ya gaza	HORIZONTAL_SLATS_ANGLE_1	22 (0x16)
	4	Daidaitawa da hannu	HORIZONTAL_SLATS_ANGLE_2	23 (0x17)

Tebur A11 - Roll-Control2 - Yanayin aiki: Roller makafi, rumfa, Pergola, Labule; Venetian makafi 90 °; Venetian makafi 180 °
Parametr 20 - Nau'in Canjawa		Sauya	Dannawa Guda			Danna sau biyu
Daraja	Suna	S1 ya da S2	Umurni		ID	Umurni	ID
0	Maɓallai masu motsi - danna don motsawa		Canjin matakin Fara Rufe Taga Canjin Matsayin Tsayawa Mai Rufe Taga		Id_Roller	Saita Matakin Rufe Taga	Id_Roller Id_Slats
1	Maɓallai masu motsi - riƙe don motsawa		Canjin Matsayin Rufe Taga		Id_Roller Id_Slats
2	Maɓalli guda ɗaya mai motsi		Canjin matakin Fara Rufe Taga Canjin Matsayin Tsayawa Mai Rufe Taga		Id_Roller
3	Maɓalli mai ban tsoro				Id_Roller	–	–
5	Sauya jaha uku				Id_Roller	–	–
Parametr 20 - Nau'in Canjawa		Sauya	Rike			Saki
Daraja	Suna	S1 ya da S2	Umurni		ID	Umurni	ID
0	Maɓallai masu motsi - danna don motsawa		Canjin matakin Fara Rufe Taga Canjin Matsayin Tsayawa Mai Rufe Taga		Id_Slats	Canjin Matsayin Tsayawa Mai Rufe Taga	Id_Slats
1	Maɓallai masu motsi - riƙe don motsawa				Id_Roller		Id_Roller
2	Maɓalli guda ɗaya mai motsi				Id_Slats		Id_Slats
3	Maɓalli mai ban tsoro		–		–	–	–
5	Sauya jaha uku		–		–	–	–
Siga 20 - Nau'in Canjawa		Sauya	Canja canjin yanayi lokacin da abin nadi baya motsi			Canja canjin yanayi lokacin da abin nadi ke motsawa
Daraja	Suna	S1 ya da S2	Umurni	ID		Umurni	ID
4	Sauya bisbila guda ɗaya		Canjin matakin Fara Rufe Taga	Id_Roller		Canjin Matsayin Tsayawa Mai Rufe Taga	Id_Roller

Lura
Id_Slats yana da alaƙa kawai da siga 151 saita zuwa ƙimar 1 ko 2.

CIGABA DA MA'AURATA

Na'urar tana ba da damar daidaita aikinta zuwa buƙatun mai amfani ta amfani da sigogi masu daidaitawa. Ana iya daidaita saitunan ta amfani da mai sarrafa Z-Wave wanda aka ƙara na'urar zuwa gare shi. Hanyar daidaita su na iya bambanta dangane da mai sarrafawa. A cikin saitunan na'ura na NICE yana samuwa azaman saitin zaɓuɓɓuka masu sauƙi a cikin Advanced Saituna. Idan kuna amfani da Yubii Home app, yawancin saitunan sigina masu zuwa za a iya canza su a sashin saitunan na'urar.

Don saita na'urar:

1. Jeka Saituna .
2. Je zuwa Na'urori.
3. Zaɓi na'urar da ta dace daga lissafin.
4. Zaɓi shafin Parameters.
5. Canja saitunan da suka dace ko ƙima.
6. Ajiye canje-canjenku.

Tebur A12 - Roll-Control2 - Siffofin ci gaba
Siga	Bayani	Girman	Default Value	Akwai Darajoji
20 - Nau'in Canjawa	Wannan siga yana ƙayyade nau'ikan sauyawa da yanayin shigar S1 da S2 ke aiki da su.	1 [byte]	0 (darajar ta asali)	0 – Maɓallai masu motsi – danna don motsawa 1 – Maɓallai masu motsi – riƙe don motsawa 2- Sauye-sauye guda ɗaya 3-Abubuwan da suka faru 4- Sauye-sauye guda ɗaya 5 – Sauye-sauyen jihohi uku
24 - Maɓalli fuskantarwa	Wannan siga yana ba da damar juyar da aikin maɓallan.	1 [byte]	0 (darajar ta asali)	0 - tsoho (maɓallin farko na sama, maɓalli na 1 DOWN) 1 - Juya (maɓallin farko DOWN, maɓalli na 1 UP)
25- Fitarwa daidaitacce	Wannan siga yana ba da damar juyar da aikin O1 da O2 ba tare da canza wayoyi ba (misali idan haɗin mota mara inganci).	1 [byte]	0 (darajar ta asali)	0 - tsoho (O1 - UP, O2 - DOWN) 1 - Juya (O1 - DOWN, O2 - Sama)
40 - Maɓalli na farko - an aika al'amuran	Wannan siga yana ƙayyade wane sakamako ne sakamakon aika ID na wurin da aka sanya musu. Ana iya haɗa ƙima (misali 1+2=3 yana nufin ana aika fage na dannawa ɗaya da sau biyu).	1 [byte]	15 (Dukkanin al'amuran suna aiki)	0 - Babu wurin da ke aiki 1- Maɓallin maɓalli sau 1 2- Maɓalli sau 2 4- Maɓalli sau 3 8- Riƙe ƙasa kuma an saki maɓalli
41 - Maɓalli na biyu - an aika al'amuran
150- Daidaitawa	Don fara daidaitawa ta atomatik, zaɓi ƙimar 3. Lokacin da tsarin daidaitawa ya yi nasara, ma'aunin yana ɗaukar ƙimar 1. Lokacin da daidaitawa ta atomatik ya kasa, siga yana ɗaukar ƙimar 2. Idan an canza lokutan canji na na'urar da hannu ta amfani da siga ( siga) 156/157), siga 150 yana ɗaukar ƙimar 4.	1 [byte]	0 (darajar ta asali)	0 – Ba a daidaita na'urar ba 1 – Nasara ta atomatik 2- An gaza yin gyara ta atomatik 3 - Tsarin daidaitawa 4 - Gyaran hannu
151– Aiki yanayin	Wannan siga yana ba ku damar daidaita aiki, dangane da na'urar da aka haɗa. A cikin yanayin makafi na venetian, dole ne kuma a zaɓi kusurwar juyawa na slats.	1 [byte]	0 (darajar ta asali)	0 - Makafi, Rufa, Pergola, Labule 1 - Makafi Venetian 90 ° 2 - Makafi Venetian 180 °
152 – Venetian makafi - slats cikakken lokacin juyawa	Don makafin Venetian ma'aunin yana ƙayyade lokacin cikakken jujjuyawar slats. Siga ba shi da alaƙa da wasu hanyoyin.	2 [byte]	15(1.5 seconds)	0 - 65535 (0 - 6553.5s, kowane 0.1s) - lokacin juyawa
154- Jinkiri don gano wuta bayan motar ta fara	Ya kamata a gyara ma'aunin kawai lokacin amfani da labulen lantarki ko ƙananan injin!Wannan siga ya kamata a yi amfani da shi lokacin da injin yana ƙara yawan amfani da wutar lantarki a hankali yayin farawa.	2 [byte]	10(1 dakika)	0 - 255 (0 - 25.5 seconds)

Tebur A12 - Roll-Control2 - Siffofin ci gaba
Siga	Bayani	Girman	Default Value	Akwai Dabi'u
155 - Gano aikin mota	Ya kamata a canza siga kawai lokacin amfani da labulen lantarki ko ƙananan injin! Ana fassara madaidaicin wutar lantarki azaman isa ga madaidaicin iyaka.	2 [byte]	2 (2 W)	0 – Ba a gano isar da madaidaicin iyaka ba. A wannan yanayin an saita siga 150 Calibration zuwa 4 - daidaitawa na hannu. Kuna buƙatar gyara lokaci da hannu a cikin sigogi 156 da 157.1 - 255 (1 - 255 W) - gano ƙarshen juyawa
156- Lokacin motsi	Wannan siga yana ƙayyade lokacin da ake buƙata don isa cikakken buɗewa. Ana saita ƙimar ta atomatik yayin aikin daidaitawa. Ya kamata a saita shi da hannu idan akwai matsaloli tare da daidaitawa ta atomatik.	2 [byte]	600(60 seconds))	0-65535 (0 - 6553.5 s, kowane 0.1 s) - lokacin juyawa
157 – Lokacin saukar motsi	Wannan siga yana ƙayyade lokacin da ake buƙata don isa cikakken rufewa. Ana saita ƙimar ta atomatik yayin lokacin tsarin daidaitawa. Ya kamata a saita shi da hannu idan akwai matsaloli tare da daidaitawa ta atomatik.
158 - Maɓallin ƙayyadaddun iyaka. Da tukunya kariya	Wannan siga yana ba ku damar saita ƙayyadadden ƙayyadadden matakin rage maƙallan. Don misaliample, don kare tukunyar furen da ke kan windowsill.	1 [byte]	0 (darajar ta asali)	0-99
159 - Matsayin da aka fi so - matakin buɗewa	Wannan siga yana ba ku damar ayyana matakin buɗaɗɗen da kuka fi so.	1 [byte]	50 (darajar ta asali)	0-990x FF – An kashe aiki
160 - Matsayin da aka fi so - kusurwar slat	Wannan siga yana ba ku damar ayyana matsayin da kuka fi so na kusurwar slat. Ana amfani da siga don makafi kawai.

KYAUTA Z-WAVE

Nunin CC - alamun da ke akwai
ID mai nuna alama - 0x50 (Gane)

CC mai nuni – akwai kaddarorin

Table A13 - Roll-Control2 - Nuni CC
ID na dukiya	Bayani	Dabi'u da bukatun
0 x03	Juyawa, Lokacin Kashewa	An fara juyawa tsakanin ON da KASHE Ana amfani da shi don saita tsawon lokacin Kunnawa/Kashe. Akwai ƙima: 0x00 .. 0xFF (0 .. 25.5 seconds) Idan an bayyana wannan, Dole ne a bayyana ma'anar kunna / Kashewa.
0 x04	Juyawa, Kunnawa/Kashe Kewaye	Ana amfani da shi don saita adadin lokutan Kunnawa/Kashe. Akwai ƙima: 0x00 .. 0xFE (0 .. 254 sau) 0xFF (nuna har sai an tsaya) Idan an bayyana wannan, Dole ne a bayyana Lokacin Kunnawa / Kashewa.
0 x05	Juyawa, A kan lokaci a cikin lokacin kunnawa/kashewa	Ana amfani da shi don saita tsawon lokacin Kan lokacin lokacin Kunnawa/Kashe. Yana ba da damar lokacin Kunnawa/Kashewa mai tausayi. Dabaru masu samuwa 0x00 (Lokacin Kunnawa/Kashewa - A lokaci daidai da Lokacin Kashe) 0x01 .. 0xFF (0.1 .. 25.5 seconds) Example: 300ms ON da 500ms KASHE ana samun su ta hanyar saita lokacin Kunnawa / Kashe (0x03) = 0x08 da Kan lokaci a cikin Lokacin Kashewa (0x05) = 0x03 Ana watsi da wannan ƙimar idan ba'a bayyana lokutan kunnawa ba. An yi watsi da wannan ƙimar idan ƙimar lokacin Kunnawa/Kashe ta ƙasa da wannan ƙimar.

Darussan Umurni masu goyan baya

Tebur A14 - Roll-Control2 - Tallafin azuzuwan umarni
Class Class	Sigar	Amintacce
COMMAND_CLASS_APPLICATION_STATUS [0x22]	V1
COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E]	V2
COMMAND_CLASS_WINDOW_COVERING [0x6A]	V1	EE
COMMAND_CLASS_SWITCH_MULTILEVEL [0x26]	V4	EE
COMMAND_CLASS_ASSOCIATION [0x85]	V2	EE
COMMAND_CLASS_MULTI_CHANNEL ASSOCIATION [0x8E]	V3	EE
COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59]	V3	EE
COMMAND_CLASS_TRANSPORT_SERVICE [0x55]	V2
COMMAND_CLASS_VERSION [0x86]	V3	EE
COMMAND_CLASS_MANUFACTURER_SPECIFIC [0x72]	V2	EE
COMMAND_CLASS_DEVICE_RESET_LOCALLY [0x5A]	V1	EE
COMMAND_CLASS_POWERLEVEL [0x73]	V1	EE
COMMAND_CLASS_SECURITY [0x98]	V1
COMMAND_CLASS_SECURITY_2 [0x9F]	V1
COMMAND_CLASS_METER [0x32]	V3	EE
COMMAND_CLASS_CONFIGURATION [0x70]	V4	EE
COMMAND_CLASS_SANARWA [0x71]	V8	EE
COMMAND_CLASS_PROTECTION [0x75]	V2	EE
COMMAND_CLASS_CENTRAL_SCENE [0x5B]	V3	EE
COMMAND_CLASS_FIRMWARE_UPDATE_MD [0x7A]	V5	EE
COMMAND_CLASS_SUPERVISION [0x6C]	V1
COMMAND_CLASS_INDICATOR [0x87]	V3	EE
COMMAND_CLASS_BASIC [0x20]	V2	EE

Bayani na CC

Table A15 - Roll-Control2 - Basic CC
Umurni	Daraja	Umurnin taswira	Ƙimar taswira
Saiti na asali	[0xFF]	Multilevel Canja Saitin	[0xFF]
Saiti na asali	[0x00]	Multilevel Canja Saitin	Multilevel Canja Saitin
Saiti na asali	[0x00] zuwa [0x63]	Canjin Matakin Fara (Sama/Ƙasa)	[0x00], [0x63]
Basic Get		Multilevel Canja Samu
Babban Rahoton (Kimar Yanzu da Ƙimar Target MUST a saita zuwa 0xFE idan ba a san matsayi ba.)		Rahoton Canja Multivel

Sanarwa CC
Na'urar tana amfani da Class Umarnin Fadakarwa don ba da rahoton abubuwan da suka faru daban-daban ga mai sarrafawa (Rukunin "Lifeline").

Table A16 - Roll-Control2 - Sanarwa CC
Nau'in Sanarwa	Lamarin / Jiha	Siga	Matsayi	A cikin wuraren ƙarshe
Gudanar da Wuta [0x08]	Rashin aiki [0x00]	–	0xFF - kunna (ba za a iya canzawa ba)	Tushen
	An gano sama-sama [0x06]
Tsarin [0x09]	Rashin aiki [0x00]
	Rashin gazawar kayan aikin tsarin tare da lambar gazawar mallakar masana'anta [0x03]	Lambar MP: 0x01 [zafin na'ura]	0xFF - kunna (ba za a iya canzawa ba)	Tushen

Kariya CC
Ajin Umurnin Kariya yana ba da damar hana na gida ko na nesa na abubuwan da aka fitar.

Table A17 - Roll-Control2 - Kariya CC
Nau'in	Jiha	Bayani	Alama
Na gida	0	Ba shi da kariya - Ba a kiyaye na'urar, kuma ana iya aiki ta al'ada ta hanyar amfani da mai amfani.	Maɓallan da aka haɗa tare da abubuwan fitarwa.
Na gida	2	Babu aiki mai yuwuwa – maɓalli ba zai iya canza yanayin gudun ba da sanda ba, akwai sauran ayyuka (menu).	An katse maɓallan daga abubuwan fitarwa.
RF	0	Ba shi da kariya - Na'urar tana karɓa da amsa duk Dokokin RF.	Ana iya sarrafa abubuwan da aka fitar ta hanyar Z-Wave.
RF	1	Babu ikon sarrafa RF - ajin umarni na asali da binary ɗin da aka ƙi, kowane ɗayan rukunin umarni za a sarrafa.	Ba za a iya sarrafa abubuwan da aka fitar ta hanyar Z-Wave ba.

Mita CC

Tebur A18 - Roll-Control2 - Mitar CC
Mita Nau'in	Sikeli	Nau'in farashin	Daidaitawa	Girman
Lantarki [0x01]	Lantarki_kWh [0x00]	Shigo da [0x01]	1	4

Canza damar

NICE Roll-Control2 yana amfani da saiti daban-daban na ID ɗin Rufe Window wanda ya danganta da ƙimar sigogin 2:

• Matsayin daidaitawa (parameter 150),
• Yanayin aiki (parameter 151).

Tebur A19 - Roll-Control2 - Canje-canje iyakoki
Matsayin daidaitawa (parameter 150)	Yanayin aiki (parameter 151)	Tallafin ID na Siga Mai Rufe Taga
0 - Ba a daidaita na'urar ko 2- An gaza yin gyara ta atomatik	0 - Makafi, Rufa, Pergola, Labule	daga kasa (0x0C)
0 - Ba a daidaita na'urar ko 2- An gaza yin gyara ta atomatik	1 - Makaho Venetian 90 ° ko 2 - Roller makafi tare da ginanniyar direba 180 °	waje_kasa (0x0C) Tsararren kusurwa (0x16)
1- Nasara ta atomatik ko 4 - Gyaran hannu	0 - Makafi, Rufa, Pergola, Labule	daga kasa (0x0D)
1- Nasara ta atomatik ko 4 - Gyaran hannu	1 - Makaho Venetian 90 ° ko 2 - Roller makafi tare da ginanniyar direba 180 °	waje_kasa (0x0D) Matsakaicin kusurwa (0x17)

Idan kowane sigogi na 150 ko 151 ya canza, mai sarrafawa yakamata yayi aikin sake ganowa don sabunta saitin ID na Sigar Rufe Window Mai Goyan bayan.
Idan mai sarrafawa ba zai iya yin aikin sake ganowa ba, ya zama dole a sake haɗa kumburin cikin hanyar sadarwa.

Bayanin Informationungiyar CCungiyar CC

Tebur A20 - Roll-Control2 - Bayanin Ƙungiyar Ƙungiyar CC
Rukuni	Profile	Ajin Umurni & Umurni	Sunan rukuni
1	Gabaɗaya: Rayuwa (0x00: 0x01)	DEVICE_RESET_LOCALLY_SANARWA [0x5A 0x01]	Hanyar rayuwa
		SANARWA_REPORT [0x71 0x05]
		SWITCH_MULTILEVEL_REPORT [0x26 0x03]
		WINDOW_COVERING_REPORT [0x6A 0x04]
		CONFIGURATION_REPORT [0x70 0x06]
		INDICATOR_REPORT [0x87 0x03]
		METER_REPORT [0x32 0x02]
		LABARI: CENTRAL_SCENE_CONFIGURATION_ [0x5B 0x06]
2	Sarrafa: KEY01 (0x20: 0x01)	WINDOW_COVERING_SET [0x6A 0x05]	Rufin Window
		WINDOW_COVERING_START_LVL_ CHANGE [0x6A 0x06]
		WINDOW_COVERING_STOP_LVL_ CHANGE [0x6A 0x07]

KA'idoji

Sanarwa na Doka:
Duk bayanai, gami da, amma ba'a iyakance su ba, bayanai game da fasali, ayyuka, da/ko wasu ƙayyadaddun samfur ana iya canzawa ba tare da sanarwa ba. NICE tana tanadin duk haƙƙoƙin sake dubawa ko sabunta samfuranta, software, ko takaddun ta ba tare da wani takalifi na sanar da kowane mutum ko mahaluƙi ba. Tambarin NICE alamar kasuwanci ce ta NICE SpA Oderzo TV Italia Duk sauran tambura da sunayen samfura da ake magana a kai tambarin kasuwanci ne na masu riƙe su.

WEEE Yarda da Umurnin
Na'urar da aka yiwa alama da wannan alamar bai kamata a zubar da sauran sharar gida ba.
Za a mika shi zuwa wurin da ake amfani da shi don sake yin amfani da sharar kayan lantarki da na lantarki.

Sanarwar dacewa
Ta haka, NICE SpA Oderzo TV Italia ta bayyana cewa na'urar tana cikin biyan buƙatu masu mahimmanci da sauran abubuwan da suka dace na Directive 2014/53/EU. Ana samun cikakken rubutun sanarwar yarda da EU a adireshin intanet mai zuwa: www.niceforyou.com/en/download?v=18
Nice SpA
Oderzo TV Italia
info@niceforyou.com
www.niceforyou.com

Takardu / Albarkatu

Nice Roll-Control2 Z Wave Makaho da Mai sarrafa rumfa [pdf] Jagoran Jagora Roll-Control2 Z Wave Makafi da Mai Kula da Rufawa, Roll-Control2, Mai sarrafa rumfa Z Wave Makaho da Mai sarrafa rumfa, Mai sarrafa rumfa da makafi, Mai sarrafa rumfa, Mai sarrafawa

Magana

• Manual mai amfani