KYAU KYAU PWM-200 Series 200W Constant Voltage PWM Fitar da Jagorar Direba

Shigarwa:
Tabbatar da shigar da voltage yana cikin kewayon kewayon samfurin da kuke amfani dashi.
Haɗa direban LED bisa ga zane na wayoyi da aka bayar a cikin jagorar.

Dimming
Daidaita kewayon dimming kamar yadda ake buƙata ta amfani da ƙayyadadden mitar PWM don ƙirar ku.

Ƙaddamarwa Kunnawa
Aiwatar da wutar lantarki zuwa direban LED kuma tabbatar da cewa ya daidaita cikin lokacin riƙewa da aka ambata a cikin ƙayyadaddun bayanai.

Shirya matsala
Koma zuwa littafin jagorar mai amfani don matakan warware matsala idan akwai matsala tare da direban LED.

Tambayoyin da ake yawan yi (FAQ)

Q: Mene ne dimming kewayon PWM-200 jerin LED direbobi?
A: The dimming kewayon daga 0% zuwa 100% ga duk model a cikin PWM-200 jerin.

Siffofin

Maɗaukaki voltage PWM style fitarwa tare da mita har zuwa 4kHz ƙira mai yarda IEEEI 789-2015 (Nau'in Blank)

Gidajen filastik tare da aji 11 da ƙirar PFC
Ana samun aikace-aikacen hasken gaggawa bisa ga IEC61347-2-13

Amfanin wutar lantarki na jiran aiki
Cikakken encapsulated tare da matakin IP67

Zaɓuɓɓukan ayyuka: 3 cikin 1 dimming (dim-to-off and ware Design)/DALL-2
Matsakaicin raguwar matakin 0.2% don nau'in DA2

Rayuwa ta yau da kullun> 50000 hours da garanti na shekaru 5

Aikace-aikace

LED tsiri lighting

Hasken LED na cikin gida
LED kayan ado lighting

Hasken gine -ginen LED
Hasken wuta

Hasken masana'antu
Buga "HL" don amfani a aji l, yanki na 2 mai haɗari (classified) wuri.

GTIN CODE
Binciken MW: http://www.meanwell.com/serviceGTlN.aspx

Bayani

Jerin PWM-200 shine direban 200W AC / DC LED wanda ke nuna madaidaicin voltage yanayin tare da fitowar salon PWM, wanda ke da ikon kula da zafin launi da daidaituwar haske yayin tuki kowane nau'in tube na LED. PWM-200 yana aiki daga 100-305VAC kuma yana ba da samfura tare da ƙididdiga daban-dabantage jeri tsakanin 12V da 48V. Godiya ga babban inganci har zuwa 94% tare da ƙirar mara amfani, duk jerin suna iya aiki don -400C + 850C yanayin zafin jiki a ƙarƙashin iskar iska kyauta. Dukkanin jerin an ƙididdige su tare da matakin kariya na ingress IP67 kuma ya dace da yin aiki don bushe, damp ko jikakkun wurare. PWM-200 sanye take da aikin dimming wanda ya bambanta da aikin sake zagayowar na fitarwa, samar da babban sassauci ga LED tube aikace-aikace.

Samfurin Samfuri

BAYANI

MISALI				Saukewa: PWM-200-12	Saukewa: PWM-200-24	Saukewa: PWM-200-36	Saukewa: PWM-200-48
FITARWA		DC VOLTAGE		12V	24V	36V	48V
		KYAUTA YANZU		15 A	8.3 A	5.55 A	4.17 A
		KYAUTA WUTA		180W	199.2W	199.8W	200.1W
		MAGANAR DIMMING		0 ~ 100%
		PWM FREQUENCY (Nau'in.)		4kHz don nau'in Blank; 2.5kHz don nau'in DA2
		SETUP, TASHI LOKACI ^{Lura. 2}Lura. 10		500ms, 80ms/230VAC ko 115VAC
		RIKE LOKACI (Nau'i)		10ms/230VAC ko 115VAC
INPUT		VOLTAGE RANGE Lura.3		100 ~ 305VAC 142 ~ 431VDC
		MAFARKI YAWA		47 ~ 63Hz
		FACTOR WUTA (Nau'in.)		PF>0.97/115VAC, PF>0.96/230VAC, PF>0.94/277VAC @ cikakken kaya
		JAMA'A HARMONIC KARYA		THD <20% (@load≧60%/115VAC, 230VAC; @load≧75%/277VAC)
		INGANTATTU (Nau'i)		92%	93%	94%	94%
		AC CURRENT (Nau'i)		2.2A / 115VAC 1.1A / 230VAC 0.9A / 277VAC
		INGANTA KYAUTA (Nau'in.)		COLD START 65A(twidth=55μ0 s measured at 50% Ipeak) at 230VAC; Ta NEMA 410
		MAX. A'A. na PSUs akan 16A CIRCUIT BREAKER		Raka'a 3 (mai katsewar kewayawa na nau'in B) / raka'a 5 (mai katsewar nau'in C) a 230VAC
		LEAKAGE YANZU		<0.75mA / 277VAC
		CIGABA DA KARFIN IKO		Amfani da ikon jiran aiki <0.5W lokacin da yake raguwa
KARIYA		KYAUTA		108 ~ 135% ƙididdige ƙarfin fitarwa
				Yanayin ɓarna ko Ƙayyadadden halin yanzu, yana murmurewa ta atomatik bayan an cire yanayin kuskure
		TAKAITACCEN GARI		Kashe o/p voltage, sake kunnawa don murmurewa (sai dai nau'in DA2) Yanayin Hiccup, yana murmurewa ta atomatik bayan an cire yanayin kuskure (kawai don nau'in DA2)
		AKAN VOLTAGE		13 ~ 18V	27 ~ 34V	41 ~ 49V	53 ~ 65V
				Kashe o/p voltage, sake kunnawa don murmurewa bayan an cire yanayin kuskure
		WUCE ZAFIN		Kashe o/p voltage, sake kunnawa don murmurewa bayan an cire yanayin kuskure
Muhalli		WURIN AIKI.		Tcase = -40 ~ +85 ℃ (Da fatan za a koma zuwa sashin "OUTPUT LOAD vs TEMPERATURE")
		MAX. GASKIYAR CASE.		Tace =+85 ℃
		DANSHI MAI AIKI		20 ~ 95% RH marasa amfani
		AJIYA TEMP., DANSHI		-40 ~ +80 ℃, 10 ~ 95% RH
		GASKIYA GASKIYA		± 0.03%/℃ (0 ~ 50 ℃)
		VIBRATION		10 ~ 500Hz, 5G 12min./1 sake zagayowar, lokaci na 72min. kowane tare da X, Y, Z axes
TSIRA & EMC		MATSAYIN TSIRA Lura. 5		UL8750 (nau'in "HL"), CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1 Designira koma zuwa BS EN/EN61347-2, bisa ga BS EN/EN13-62384-67 shafi J dace da gaggawa shigarwa
		DALI STANDARDS		Yi biyayya da IEC62386-101, 102, 207, 251 don nau'in DA2 kawai, Nau'in Na'ura 6(DT6)
		KARANTA VOLTAGE		I/PO/P: 3.75KVAC; I/P-DA: 1.5KVAC; O/P-DA:1.5KVAC
		JUMU'A KEBE		I/ PO/ P: 100M Ohms/ 500VDC/ 25 ℃/ 70% RH
		Farashin EMC Lura. 6		Yarda da BS EN/EN55015, BS EN/EN61000-3-2 Class C (@load≧60%); TS EN 61000-3-3, GB/T 17743, GB17625.1; EAC TP TC 020
		EMC LAYYA		Yarda da BS EN/EN61000-4-2,3,4,5,6,8,11; TS EN/EN61547, matakin masana'antar haske (rigakafin tashin hankali, Layin Layi 2KV), EAC TP TC 020
WASU		Farashin MTBF		2235.6K awa min. Telcordia SR-332 (Bellcore); awanni 178.7K min. MIL-HDBK-217F (25 ℃)
		GIRMA		1956839.5mm (LWH)
		CIKI		1.03Kg; 12 inji mai kwakwalwa / 13.4Kg/ 0.71CUFT
NOTE		Duk sigogin da BA a ambata musamman ana auna su a shigarwar 230VAC, ƙimar halin yanzu da 25℃ na yanayin zafi. Ana auna tsawon lokacin saitawa a farkon sanyi na farko. Kunna/KASHE direban na iya haifar da haɓaka lokacin saitawa. Ana iya buƙatar rage ƙima a ƙarƙashin ƙaramin shigar da ƙaratage. Da fatan za a koma zuwa sassan “SATAKIYYA” don cikakkun bayanai. Ana ɗaukar direba a matsayin ɓangaren da za a yi aiki tare da kayan aiki na ƙarshe. Tun da cikakken shigarwa zai shafi aikin EMC, masana'antun kayan aiki na ƙarshe dole ne su sake cancantar umarnin EMC akan cikakken shigarwa kuma. (kamar yadda akwai akan https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf Wannan jerin ya hadu da tsawon rayuwar rayuwa na> sa'o'i 50,000 na aiki lokacin da Tcase, musamman tc point (ko TMP, a kowace DLC), kusan 75 ℃ ko ƙasa da haka. Da fatan za a koma zuwa bayanin garanti akan MEAN WELL's websaiti a http://www.meanwell.com The yanayi zazzabi derating na 3.5 ℃ / 1000m tare da fanless model da na 5 ℃ / 1000m tare da fan model ga aiki tsawo sama da 2000m (6500ft). Don kowane bayanin kula na aikace-aikacen da taka tsantsan shigar aikin tabbatar da ruwa na IP, da fatan za a duba littafin mai amfani kafin amfani. https://www.meanwell.com/Upload/PDF/LED_EN.pdf Ba a ba da shawarar haɗawa zuwa kayan aiki masu ƙarfi ba Dangane da ikon IEC 62386-101 / 102 DALI akan ƙa'idodin lokaci da katsewa, lokacin saitawa yana buƙatar gwadawa tare da mai sarrafa DALI wanda zai iya tallafawa ikon DALI akan aiki, in ba haka ba lokacin saitawa zai kasance sama da 0.5 seconds don nau'in DA2. Don cika buƙatun sabuwar ƙa'idar ErP don kayan aikin hasken wuta, ana iya amfani da wannan wutar lantarki ta LED a bayan mai canzawa ba tare da haɗawa ta dindindin ba zuwa ga na'urori. Laifin Laifin Samfura: Don cikakkun bayanai, da fatan za a duba https://www.meanwell.com/serviceDisclaimer.aspx
	Kibiya.com		File Suna: PWM-200-SPEC 2024-09-09

AIKIN DIMMING

Ka'idar dimming don fitowar salon PWM
Ana samun dimming ta hanyar canza yanayin aiki na halin yanzu.

3 a cikin 1 aikin dimming (na nau'in Blank) ‧

Aiwatar da ɗayan hanyoyin uku tsakanin DIM+ da DIM-: 0 ~ 10VDC, ko siginar PWM 10V ko juriya.
Dimming tushen halin yanzu daga wutar lantarki: 100μA (nau'i)

Ana amfani da juriya na ƙari:

Lura:

Min. Zagayowar aikin fitarwa na yanzu shine kusan 1%, kuma shigarwar dimming shine kusan 6KΩ ko 0.6VDC, ko siginar 10V PWM tare da sake zagayowar aikin 6%.
Zagayowar aikin fitarwa na yanzu zai iya faɗuwa zuwa 0% lokacin shigar da dimming ƙasa da 6KΩ ko ƙasa da 0.6VDC, ko siginar 10V PWM tare da sake zagayowar aiki ƙasa da 6%

DALI dubawa PUSH dimming (gefen farko)

Aiki	Tsawon lokacin aiki	Aiki
Shortan turawa	0.1 ~ 1 dakika	Kunna-KASHE direban
Dogon turawa	1.5 ~ 10 dakika	Kowane Dogon Turawa yana canza alkiblar dimming, dimming sama ko ƙasa
Sake saiti	>11 dakika	Saita matakin dimming zuwa 100%

Ma'aikata tsoho matakin dimming ne a 100%.
Idan aikin turawa ya kasance ƙasa da 0.05 sec., ba zai haifar da canji ga matsayin direba ba.
Har zuwa direbobi 10 na iya yin PUSH dimming a lokaci guda yayin amfani da maɓallin turawa gama gari.
Matsakaicin tsayin kebul daga maɓallin turawa zuwa direba na ƙarshe shine mita 20.
Ana iya haɗa maɓallin tura ƙari kawai tsakanin tashar DA +, kamar yadda aka nuna a cikin zane, da AC / L (a cikin launin ruwan kasa ko baki); zai kai ga gajeriyar kewayawa idan an haɗa shi da AC/N.

Interface DALI (na DA2-Nau'in)

Aiwatar da siginar DALI tsakanin DA+ da DA-.
Ka'idar DALI ta ƙunshi ƙungiyoyi 16 da adireshi 64.
Zagayowar Min. aiki na fitarwa na yanzu shine kusan 0.2%

KYAUTA KYAUTA vs TEMPERATURE

SIFFOFIN SIFFOFI HALAYEN WUTA (PF).

TOTAL HARMONIC rarrabuwa (THD)

INGANTATTU vs LOAD
Jerin PWM-200 yana da ingantaccen aiki wanda har zuwa 94% ana iya kaiwa ga aikace-aikacen filin.

Model 48V, akwati a 75 ℃

LOKACIN RAYUWA

Tsarin zane

Ƙayyadaddun Makanikai

Ba da shawarar Hanyar Jagora

Manual shigarwa

Haɗin don nau'in Blank da nau'in DA2

Tsanaki

Kafin fara kowane shigarwa ko aikin kulawa, da fatan za a cire haɗin wutar lantarki daga mai amfani. Tabbatar cewa ba za a iya sake haɗa shi da gangan ba!
Ajiye iskar da ya dace a kusa da naúrar kuma kar a tara kowane abu a kai. Hakanan dole ne a kiyaye izinin 10-15 cm lokacin da na'urar da ke kusa ta kasance tushen zafi.
Hanyoyi masu hawa ban da daidaitaccen daidaitawa ko aiki a ƙarƙashin babban zafin yanayi na iya ƙara yawan zafin jiki na ɓangaren ciki kuma zai buƙaci rage ƙima a cikin fitarwa na halin yanzu.

Ƙimar halin yanzu na kebul na firamare/secondary da aka yarda ya kamata ya fi ko daidai da na naúrar. Da fatan za a duba ƙayyadaddun sa.
Don direbobin LED masu haɗin haɗin ruwa, tabbatar da cewa haɗin gwiwa tsakanin naúrar da na'urar hasken wuta yana da ƙarfi ta yadda ruwa ba zai iya kutsawa cikin tsarin ba.
Don direbobin LED masu ƙarfi, tabbatar da cewa mai sarrafa dimming ɗin ku yana da ikon tuƙi waɗannan raka'a. Jerin PWM yana buƙatar 0.15mA kowace naúrar.

Tc max. an gano a kan alamar samfurin. Da fatan za a tabbatar cewa zafin yanayin Tc ba zai wuce iyaka ba.
Ya dace da amfani na cikin gida ko waje ba tare da hasken rana kai tsaye ba. Da fatan za a guji nutsewa cikin ruwa sama da mintuna 30.
Ana ɗaukar wutar lantarki a matsayin ɓangaren da za a yi aiki tare da kayan aiki na ƙarshe. Tun da cikakken shigarwa zai shafi aikin EMC, masana'antun kayan aiki na ƙarshe dole ne su sake cancantar umarnin EMC akan cikakkiyar shigarwa kuma.

Takardu / Albarkatu

KYAU KYAU PWM-200 Series 200W Constant Voltage PWM Output LED Driver [pdf] Littafin Mai shi
PWM-200 Series 200W Constant Voltage PWM Fitar LED Direba, PWM-200 Series, 200W Constant Voltage PWM Output LED Driver, Voltage PWM Output LED Driver, PWM Fitarwa LED Direba, Fitarwa LED Direba, Direba

Magana

Manual mai amfani

KYAU KYAU PWM-200 Series 200W Constant Voltage PWM Output LED Driver

Umarnin Amfani da samfur