Legrand E1-4 CommandCenter Secure Gateway

Ƙayyadaddun bayanai

• Sunan samfur: CommandCenter Secure Gateway E1 Model
• Platform Software Management: Raritan's management software platform
• Fasaloli: Amintaccen samun dama da sarrafa na'urorin IT
• Samfuran Hardware: CC-SG E1-5, CC-SG E1-3, CC-SG E1-4
• Tashar jiragen ruwa: Serial Port, LAN Ports, USB Ports, Visual Ports (HDMI, DP, VGA)
• Alamar LED: LED Disk, LED Power, Ƙararrawar wutar lantarki, LED mai zafi na CPU

Umarnin Amfani da samfur

Cire fakitin CC-SG:
Tare da jigilar kaya, yakamata ku karɓi Ƙofar Tsaro ta CommandCenter. Ƙayyade wuri mai dacewa don shigarwa a cikin tsabta, mara ƙura, wuri mai kyau kusa da tashar wutar lantarki.

II. Rack-Mount CC-SG:
Kafin hawan rak, tabbatar da an cire duk igiyoyin wutar lantarki kuma an cire igiyoyi/na'urori na waje.

Abubuwan Abubuwan Rack Mount Kit:

• Rails na ciki waɗanda ke haɗe zuwa sashin CC-SG
• Wuraren waje waɗanda ke haɗawa da taragon
• Jagoran layin dogo mai zamewa wanda aka sanya tsakanin dogo na ciki da na waje

Shigar da Rails na ciki a kan CC-SG Unit:

1. Zamar da layin dogo na ciki daga layin dogo na waje kuma haɗa shi zuwa sashin CC-SG ta amfani da sukurori.
2. Daidaita ƙugiya na dogo tare da ramuka akan dogo na ciki kuma danna kan naúrar.
3. Zamar da kowane dogo zuwa gaba har sai kun ji dannawa.

Sanya Rails na waje akan Rack:

1. Haɗa gajerun madaidaicin gaba zuwa dogo na waje tare da sukurori.
2. Zamewa dogayen maƙallan baya zuwa cikin dogo na waje kuma haɗe da sukurori.
3. Daidaita tsawon sashin layin dogo don dacewa da zurfin tara.
4. Haɗa ƙarshen maƙallan manyan dogo na waje zuwa tarawa ta amfani da wanki da skru.

Sanya CC-SG a cikin Rack:

1. Cikakkun tsawaita layin dogo kuma daidaita tare da bayan hanyoyin ciki.
2. Zamar da naúrar CC-SG cikin rakiyar har sai kun ji dannawa.
3. Kada a sanya kowane kaya akan kayan aikin da aka ɗora akan layin dogo.

Lura: Dukan hanyoyi na ciki suna da shafuka masu kullewa. Tabbatar da daidaita daidai lokacin shigarwa.

Haɗa Kebul:
Da zarar an shigar da naúrar CC-SG a cikin rakiyar, haɗa igiyoyi kamar yadda aka tanadar.

Ƙofar Tsaro ta CommandCenter E1 Model

Jagora Saitin Sauri
An ƙera dandali na software na sarrafa Raritan don haɓaka amintaccen samun dama da sarrafa na'urorin IT.

CC-SG E1-5 Hardware Model

Maɓallin zane
1	Ƙarfi
2	Serial Port
3	LAN Ports
4	USB Ports (3 blue blue, 2 duhu shudi}
5	Tashar jiragen ruwa na gani (1 HDMI, 1 DP, 1 VGA)
6	Karin Tashoshi Ba sa amfani
7	LED diski
8	Sake saitin Port (sake kunna CC-SG)
9	Wutar Lantarki
10	Maɓallin tura ƙararrawa na wutar lantarki da LED
11	CPU Overheat LED

• E1-3 da E1-4 Model (Sigar kayan aikin EOL)
• CC-SG E1-3 da E1-4 Hardware Model

Maɓallin zane
1	Ƙarfi
2	KVM Ports
3	LAN Ports
4	Ƙarin tashoshin jiragen ruwa Kada ku yi amfani da su.

Cire fakitin CC-SG
Tare da jigilar kaya, yakamata ku karɓi:

• 1-CommandCenter Secure Gateway E1 naúrar
• 1-CommandCenter Secure Gateway E1 gaban bezel
• 1-Kit ɗin Rack Mount
• 2-Igiyar samar da wutar lantarki
• 1-Bugu da sauri Jagoran Saita

Ƙayyade Wurin Rack
Yanke shawarar wuri a cikin rako don CC-SG, a cikin tsaftataccen wuri, mara ƙura, wuri mai kyau. Ka guje wa wuraren da aka samar da zafi, ƙarar wutar lantarki, da filayen lantarki kuma sanya shi kusa da tushen wutar lantarki.

Farashin CC-SG
Kafin hawan CC-SG, cire duk igiyoyin wutar lantarki kuma cire duk kebul da na'urori na waje.

Kit ɗin ɗorawa ya ƙunshi:

• 2 nau'i-nau'i na raƙuman ruwa

Kowane nau'i-nau'i ya ƙunshi sassa biyu: layin dogo na ciki wanda ke manne da naúrar CC-SG, da layin dogo na waje wanda ke manne da taragon. Ana sanya jagorar dogo mai zamiya tsakanin dogo na ciki da na waje. Jagoran dogo mai zamiya ya kamata ya kasance a manne da layin dogo na waje.

• 1 guda biyu na gajerun maƙallan gaba
• 1 biyu na dogon maƙallan baya
• Short sukurori, Dogayen sukurori
• Masu wanki

Shigar da Rails na ciki a kan CC-SG Unit

1. Zamar da layin dogo na ciki daga layin dogo na waje gwargwadon yadda zai tafi. Latsa maɓallin kulle don sakin layin dogo na ciki daga layin dogo na waje sannan cire layin dogo na ciki gaba ɗaya. Yi wannan don duka nau'i-nau'i na raƙuman ruwa.
2. Akwai ramuka guda biyar akan kowane dogo na ciki wanda yayi daidai da ƙugiyoyin dogo biyar a kowane gefen sashin CC-SG. Daidaita kowane ramukan dogo na ciki tare da ƙugiya na dogo, sannan danna kowane dogo a kan naúrar don haɗa shi.
3. Zamar da kowane dogo zuwa gaban naúrar har sai kun ji dannawa.
4. Haɗa layin dogo na ciki zuwa sashin CC-SG tare da gajerun sukurori.

Shigar da Rails na waje akan Rack

1. Rails na waje suna haɗe zuwa tara. Wurin dogo na waje za su dace da takalmi masu zurfin inci 28-32.
2. Haɗa gajerun madaidaicin gaba zuwa kowane dogo na waje tare da gajerun sukurori. Kula da nunin sama/Gaba akan maƙallan lokacin haɗa su.
3. Zamar da kowane dogon baya na baya zuwa kishiyar kowane ƙarshen dogo na waje. Haɗa dogayen maƙallan baya zuwa ga dogo na waje tare da gajerun sukurori. Kula da alamar sama/Baya akan maƙallan lokacin haɗa su.
4. Daidaita tsayin rukunin layin dogo gaba ɗaya don dacewa da zurfin tara.
5. Haɗa kowane madaidaicin ƙarshen layin dogo na waje zuwa taragon tare da wanki da dogayen sukurori.

Sanya CC-SG a cikin Rack
Da zarar an haɗa layin dogo zuwa duka naúrar CC-SG da rack, shigar da CC-SG a cikin taragon.

1. Cikakkun tsawaita layin dogo, sa'an nan kuma jera layin baya na ciki tare da gaban raƙuman rakodin.
2. Zamar da naúrar CC-SG cikin rakiyar har sai kun ji dannawa. Wataƙila dole ne ka danna maɓallan makullin lokacin shigar da naúrar CC-SG a cikin rakiyar.

Lura: Kada a sanya kowane kaya akan kayan aikin da aka ɗora akan layin dogo a wurin shigarwa.

Bayanin Makulli
Dukan hanyoyi na ciki suna da shafin kullewa:

• Don kulle naúrar CC-SG cikin wuri lokacin da aka tura shi gabaɗaya cikin taragon.
• Don kulle naúrar CC-SG cikin wuri lokacin da aka tsawanta daga rakiyar.

Haɗa igiyoyi
Da zarar an shigar da naúrar CC-SG a cikin rakiyar, za ku iya haɗa igiyoyi. Dubi zane a shafi na 1.

1. Haɗa kebul ɗin LAN na cibiyar sadarwa na CAT 5 zuwa tashar LAN 1 akan sashin baya na sashin CC-SG. Ana ba da shawarar sosai don haɗa kebul na LAN na CAT 5 na biyu zuwa tashar LAN 2. Haɗa sauran ƙarshen kowane kebul na CAT 5 zuwa cibiyar sadarwa.
2. Haɗa igiyoyin wutar lantarki guda 2 da aka haɗa da AC zuwa tashoshin wutar lantarki akan rukunin baya na sashin CC-SG. Toshe sauran ƙarshen igiyoyin wutar AC zuwa kantuna masu kariyar UPS masu zaman kansu.
3. Haɗa kebul na KVM zuwa madaidaitan tashoshin jiragen ruwa akan sashin baya na sashin CC-SG.

Shiga zuwa Console na gida don saita adireshin IP na CC-SG

1. Ƙarfi ON CC-SG ta latsa maɓallin WUTA a gaban sashin CC-SG.
2. Haɗa bezel na gaba ta hanyar ɗaukar shi zuwa gaban sashin CC-SG.
3. Shiga a matsayin admin/ritan. Sunayen mai amfani da kalmomin shiga suna da hankali.
4. Za a umarce ku da ku canza kalmar sirrin wasan bidiyo na gida.
   • Buga tsoho kalmar sirri (raritan) sake.
   • Buga sannan tabbatar da sabon kalmar sirri.
5. Danna CTRL+X lokacin da ka ga allon maraba.
6. Zaɓi Aiki > Mu'amalar Sadarwar Yanar Gizo > Saitin Interface. Console Mai Gudanarwa ya bayyana.
7. A cikin filin Kanfigareshan, zaɓi DHCP ko Static. Idan ka zaɓi Static, rubuta adreshin IP na tsaye. Idan ana buƙata, saka sabar DNS, netmask, da adireshin ƙofa.
8. Zaɓi Ajiye.

Tsohuwar Saitunan CC-SG

• Adireshin IP: DHCP
• Subnet Mask: 255.255.255.0 Sunan mai amfani/Password: admin/raritan

Sami lasisin ku

1. Mai gudanar da lasisin da aka keɓance a lokacin siye zai karɓi imel daga Portal Lasisin Raritan lokacin da akwai lasisi. Yi amfani da hanyar haɗin yanar gizo a cikin imel, ko tafi kai tsaye zuwa www.raritan.com/support. Ƙirƙiri asusun mai amfani da shiga, sannan danna "Ziyarci Kayan Aikin Gudanar da Maɓallin Lasisi". Shafin bayanan asusun lasisi yana buɗewa.
2. Danna shafin lasisin samfur. Lasisin da kuka saya suna nunawa a cikin jeri. Kuna iya samun lasisi 1 kawai, ko lasisi da yawa.
3. Don samun kowane lasisi, danna Ƙirƙiri kusa da abin da ke cikin jerin, sannan shigar da ID na Mai watsa shiri na Ƙofar Tsaro ta CommandCenter. Don gungu, shigar da ID na Mai watsa shiri. Kuna iya kwafa da liƙa ID ɗin Mai watsa shiri daga shafin Gudanar da Lasisi. Duba Nemo ID na Mai watsa shiri (a shafi na 6).
4. Danna Ƙirƙiri Lasisi. Bayanan da kuka shigar suna nunawa a cikin bugu-up. Tabbatar da cewa ID ɗin Mai watsa shiri daidai ne. Don gungu, tabbatar da ID na Mai watsa shiri.
   Gargadi: Tabbatar da ID Mai watsa shiri daidai! Lasisin da aka ƙirƙira tare da ID na Mai watsa shiri mara inganci ba shi da inganci kuma yana buƙatar taimakon Taimakon Fasaha na Raritan don gyarawa.
5. Danna Ok. Lasin file an halicce shi.
6. Danna Zazzagewa Yanzu kuma adana lasisi file.

Shiga zuwa CC-SG
Da zarar CC-SG ta sake farawa, zaku iya shiga CC-SG daga abokin ciniki mai nisa.

1. Kaddamar da mai bincike mai goyan bayan kuma rubuta URL na CC-SG: https:// / admin. Don misaliample, https://192.168.0.192/admin.
   Lura: Saitin tsoho don haɗin yanar gizo shine HTTPS/SSL rufaffen.
2. Lokacin da taga faɗakarwar tsaro ta bayyana, karɓi haɗin.
3. Za a gargaɗe ku idan kuna amfani da sigar Muhalli na Runtime mara tallafi. Bi saƙon don ko dai zazzage sigar daidai, ko ci gaba. Tagar shiga yana bayyana.
   Lura: Sigar abokin ciniki yana bayyane akan shafin shiga.
4. Buga tsoho sunan mai amfani (admin) da kalmar sirri (raritan) kuma danna Login.
   Abokin Gudanarwar CC-SG yana buɗewa. Ana sa ku canza kalmar sirrinku. Ana aiwatar da kalmomin sirri masu ƙarfi don admin.

Nemo ID na Mai watsa shiri

1. Zaɓi Gudanarwa > Gudanar da Lasisi.
2. ID ɗin Mai watsa shiri na rukunin Ƙofar Tsaro ta CommandCenter an shigar da ku cikin nuni a cikin shafin Gudanar da Lasisi. Kuna iya kwafa da liƙa ID ɗin Mai watsa shiri.

Shigar kuma Duba Lasisin ku

1. A cikin Abokin Gudanarwa na CC-SG, zaɓi Gudanarwa> Gudanar da Lasisi.
2. Danna Ƙara Lasisi.
3. Karanta yarjejeniyar lasisi kuma gungura ƙasa gabaɗaya yankin rubutu, sannan zaɓi akwati na Yarda.
4. Danna Browse, sannan zaɓi lasisi file kuma danna Ok.
5. Idan kana da lasisi da yawa, kamar lasisin kayan aiki "tushe" da lasisin Ƙara-kan don ƙarin nodes ko WS-API, dole ne ka fara loda lasisin kayan aikin jiki tukuna. Danna Browse, sannan zaɓi lasisi file don upload.
6. Danna Buɗe. Lasin yana bayyana a lissafin. Maimaita don ƙarin lasisi. Dole ne ku bincika lasisi don kunna fasalin.
7. Zaɓi lasisi daga lissafin sannan danna Dubawa. Duba duk lasisin da kuke son kunnawa.

VIII. Matakai na gaba
Duba Taimakon kan layi na CommandCenter Secure Gateway a https://www.raritan.com/support/product/commandcenter-secure-gateway.

Ƙarin Bayani

• Don ƙarin bayani game da Ƙofar Tsaro ta CommandCenter da duk layin samfurin Raritan, duba Raritan's webshafin (www.raritan.com). Don batutuwan fasaha, tuntuɓi Tallafin Fasaha na Raritan. Duba shafin Tallafin Tuntuɓi a cikin
• Sashen tallafi akan Raritan's website don bayanin goyon bayan fasaha a duk duniya.
• Kayayyakin Raritan suna amfani da lambar lasisi ƙarƙashin GPL da LGPL. Kuna iya buƙatar kwafin lambar tushe. Don cikakkun bayanai, duba Bayanin Software na Buɗewa a
  • (https://www.raritan.com/about/legal-statements/open-source-software-statement/) na Raritan website.

FAQS

Tambaya: Menene zan yi idan na gamu da matsaloli yayin aikin shigarwa?
A: Idan kun fuskanci ƙalubale yayin shigarwa, koma zuwa cikakken umarnin da aka bayar a cikin littafin mai amfani. Hakanan zaka iya tuntuɓar tallafin abokin ciniki don taimako.

Takardu / Albarkatu

Legrand E1-4 CommandCenter Secure Gateway [pdf] Jagorar mai amfani E1-5, E1-3, E1-4, E1-4 CommandCenter Secure Gateway, E1-4, CommandCenter Secure Gateway, Amintaccen Ƙofar, Ƙofar

Magana

• Manual mai amfani