MPI Magnetostrictive Level Sensors
Jagoran Shigarwa
Don MPI-E, MPI-E Chemical, da MPI-R Amintaccen Ciki 

Na gode
Godiya da siyan firikwensin matakin magnetostrictive na MPI daga gare mu! Muna godiya da kasuwancin ku da amanar ku. Da fatan za a ɗauki ɗan lokaci don sanin kanku da samfurin da wannan littafin kafin shigarwa. Idan kuna da wasu tambayoyi, a kowane lokaci, kar ku yi shakka a kira mu a 888525-7300.

NOTE: Bincika lambar QR zuwa dama don ganin cikakken jagorar mai amfani akan kwamfutar hannu ko wayoyin hannu. Ko ziyarci www.apgsensors.com/support don samun shi a kan mu website.

Bayani

Na'urar firikwensin matakin magnetostrictive na MPI yana ba da cikakkiyar daidaito kuma ana iya maimaita karatun matakin a cikin nau'ikan aikace-aikacen auna matakin ruwa iri-iri. An ba da izini don shigarwa a cikin Class I, Division 1, da Class I, Zone 0 wurare masu haɗari a cikin Amurka da Kanada ta CSA, da ATEX da IECEX don Turai da sauran duniya.

Yadda Ake Karanta Label ɗinku

Kowane lakabi yana zuwa tare da cikakken lambar ƙira, lambar ɓangaren, da lambar serial. Lambar samfurin don MPI zai yi kama da wani abu kamar haka:
  SAMPSaukewa: MPI-R5-ZY-P3SB-120-4D-N

Lambar ƙirar tana da alaƙa da duk zaɓuɓɓukan daidaitawa kuma tana gaya muku ainihin abin da kuke da shi.
Kwatanta lambar ƙira zuwa zaɓuɓɓukan da ke kan takaddar bayanan don gano ainihin tsarin ku.
Hakanan zaka iya kiran mu da samfurin, sashi, ko lambar serial kuma za mu iya taimaka maka.
Hakanan zaku sami duk bayanan takaddun shaida masu haɗari akan alamar.

 Garanti

Wannan samfurin yana ƙarƙashin garantin APG don zama mai 'yanci daga lahani a cikin kayan aiki da aiki ƙarƙashin amfani da sabis na samfur na yau da kullun na tsawon watanni 24. Don cikakken bayani game da Garantinmu, da fatan za a ziyarci https://www.apgsensors.com/about-us/terms-conditions. Tuntuɓi Tallafin Fasaha don karɓar Izinin Abubuwan Dawowa kafin jigilar samfuran ku baya. Duba lambar QR da ke ƙasa don karanta cikakken bayanin Garantinmu akan kwamfutar hannu ko wayoyin hannu.

https://www.apgsensors.com/about-us/terms-conditions 

Girma

MPI-E Chemical Housing Dimensions

Girman Gidajen MPI-E

Jagoran Shigarwa & Umarni

Ya kamata a shigar da MPI a cikin gida-ciki ko waje-wanda ya cika waɗannan sharuɗɗan:

•  Yanayin yanayi tsakanin -40°F da 185°F (-40°C zuwa 85°C)
• Dangantakar zafi har zuwa 100%
• Tsayin tsayi har zuwa mita 2000 (ƙafa 6560)
• IEC-664-1 Digiri na Ƙarƙashin Ƙira 1 ko 2
• IEC 61010-1 Aunawa Category II
• Babu wani sinadari mai lalacewa zuwa bakin karfe (kamar NH3, SO2, Cl2, da sauransu) (Ba a zartar da zaɓin kara nau'in filastik ba)
• Ample sarari don kiyayewa da dubawa

Dole ne a ƙara kulawa don tabbatar da:

• Binciken yana nesa da filayen maganadisu masu ƙarfi, kamar waɗanda injiniyoyi ke samarwa, taransfoma, bawul ɗin solenoid, da sauransu.
  • Matsakaici ba shi da ƙoshin ƙarfe da sauran abubuwa na waje.
  • Binciken ba a fallasa shi ga girgizar da ta wuce kima.
  • Mai iyo (s) ya dace ta rami mai hawa. Idan mai iyo bai dace ba, dole ne a ɗora shi a kan tushe daga cikin jirgin da ake sa ido.
  • Tushen (s) yana daidaitawa da kyau akan tushe (Duba Hoto 5.1 a ƙasa). Ma'aikata za ta girka masu iyo ta MPI-E. MPI-R masu iyo abokan ciniki galibi ke shigar da su.

  MUHIMMI: Dole ne a daidaita tafsirin ruwa da kyau a kan tushe, ko kuma karatun firikwensin zai zama mara kyau kuma ba abin dogaro ba ne. Shawarwarin da ba a buɗe ba za su sami sitika ko etching da ke nuna saman mai iyo. Cire sitika kafin amfani.

Sharuɗɗan Amfani da ATEX:

• Ƙarƙashin wasu matsananciyar yanayi, sassan da ba ƙarfe ba da aka haɗa a cikin kewayen wannan kayan aikin na iya haifar da matakin cajin lantarki mai iya kunna wuta. Don haka ba za a shigar da kayan aiki a wurin da yanayin waje ya dace don gina cajin lantarki a kan irin waɗannan wuraren ba. Bugu da ƙari, kayan aikin za a tsaftace su kawai tare da tallaamp zane.
• An kera katangar daga Aluminum. A lokuta da ba kasafai ba, tushen kunna wuta saboda tasiri da tartsatsin tartsatsi na iya faruwa. Za a yi la'akari da wannan lokacin shigarwa.

Umarnin Shigarwa:

• Lokacin ɗagawa da shigar da firikwensin tabbatar da rage girman kusurwar lanƙwasawa tsakanin tsayayyen tushe a sama da ƙasa na firikwensin da sassauƙan tushe a tsakanin. Lanƙwasawa mai ƙarfi a waɗannan wuraren na iya lalata firikwensin. (Ba za a iya amfani da shi don tushen bincike mara sassauƙa ba.)
• Idan tushe na firikwensin ku da kuma masu iyo sun dace ta cikin rami mai hawa, a hankali rage taron cikin jirgin, sannan ku kiyaye zaɓin hawan firikwensin zuwa jirgin.
• Idan masu iyo ba su dace ba, saka su a kan tushe daga cikin jirgin da ake sa ido. Sannan kiyaye firikwensin zuwa jirgin ruwa.
• Don na'urori masu auna firikwensin tare da tasha, koma zuwa zanen taron da aka haɗa tare da firikwensin don wuraren shigarwa tasha ruwa.
• Don sinadarai na MPI-E, tabbatar da binciken yana mai da hankali tare da dacewa don kar a goge abin da ke jure sinadarai daga zaren abin da ya dace.

Umarnin Shigarwa na Wutar Lantarki:

• Cire murfin mahalli na MPI ɗin ku.
• Ciyar da wayoyi na tsarin zuwa MPI ta hanyar buɗaɗɗen rafi. Abubuwan kayan aiki dole ne su zama UL/CSA An jera don shigarwa na CSA da IP65 An ƙididdige su ko mafi kyau.
• Haɗa wayoyi zuwa tashoshin MPI. Yi amfani da tarkace ferrules akan wayoyi, idan zai yiwu.
• Sauya murfin gidaje.

Duba Sensor da zane-zane na Waya (sashe na 6) don Modbus wayoyi examples.

Girman Gidajen MPI-R

 Abubuwan da aka bayar na Automation Products Group, Inc.
1025 W 1700 N Logan, UT 84321
www.apgsensors.com 
waya: 888-525-7300 
imel: sales@apgsensors.com
Darasi na #200339
Doc #9005625 Rev B

Takardu / Albarkatu

	APG MPI-E MPI Magnetostrictive Level Sensors [pdf] Jagoran Shigarwa MPI-E, MPI Magnetostrictive Level Sensors, MPI-E MPI Magnetostrictive Level Sensors, Level Sensors, Sensors
	APG MPI-E MPI Magnetostrictive Level Sensors [pdf] Jagoran Shigarwa MPI-E, MPI-E Chemical, MPI-R, MPI-E MPI Magnetostrictive Level Sensors, MPI-E, MPI Magnetostrictive Level Sensors, Level Sensors, Sensors

Magana

• Manual mai amfani